REPAIR AND MAINTENANCE OF FALSE CEILING,ROOFING AND OTHER B/R WORKS IN OTM ACCN AT PALCHAN

Amount

Dismantling wall and ceiling board any of description complete all as specified and directed by Engr-in-Charge.

M&L for 12 mm thick perforated particle board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid as in ceilings complete all as specified and as directed by Engr-in-charge Note:- Framework for ceiling shall be measured and paid separately).

All as per ser Item No.2 above but except boarding

M&L for 4mm thick plain AC boards as in ceiling fixed with screws to framework complete all as specified and as directed by Engr-in-charge

All as per ser item No 4 above but except boarding

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling complete all as specified and as directed by Engr-in-charge

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in wall paneling complete all as specified and as directed by Engr-in-charge

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm complete all as specified and as directed by Engr-in-charge

M&L for 6 mm thick Plywood grade BWR type BB board of any size fixed with screws to timber frame as ceiling fixed flat or in sloping, complete, all as specified and directed by Engr-in-Charge

M&L for 6 mm thick Plywood grade BWR type BB board of any size fixed with screws to timber frame as in wall paneling fixed, complete, all as specified and directed by Engr-in-Charge

S&F 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work as in wall paneling, all as specified and directed by Engineer-in-charge.

S&F 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work as in ceiling, all as specified and directed by Engineer-in-charge.

M&L Plain fillets,square,rectangular or triangular in section, clean sawn, secured with nails or brads of size exc 3sq cm and n exc 6 sq cm of second class softwood

M&L for Second class softwood timber framed and fixed, Clean sawn in scantling, all as specified and directed.

All as per ser Item No 14 here-in-before but except timber, complete all as specified and directed.

S&F 5mm thick printed colour PVC sheets in strips & channel feathered at the edges for fixing on solid PVC wall lining and solid PVC partitions inclusive of solvent cement and fixing at site complete all as specified and as directed by Engineer-in-charge

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as specification and drawing complete all as specified and as directed by Engineer-in-Charge

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-charge

M&L for Preparation of new ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engr-in-charge

M&L for Preparation of old ceiling surfaces and applying one coats of white wash complete all as specified and as directed by Engr-in-charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel in Joist, channel, angle, or tee sections, Hollow or round steel tubes, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410 -W (GdeE- 250) quality-A, complete all as specified and directed.

S & F mild steel Windows Chajja / wind ties for roof covering including screwing bolts, etc complete all as specified and directed.

S&F Pre-painted gaivatume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F 0.63mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

All as per ser Item No 26 here-in-before but except sheets, complete all as specified and directed.

S&F Pre-painted gaivatume aluminium sheet zinc coatin GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

All as per ser Item No 29 here-in-before but one coat of synthetic enamel paint over old surface of Wall, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the permises complete all as specified and directed by Engineer-in-Charge

M&L for 20mm thick Screed bed or bedding layer in cement mortar 1:6 for laying of floor tiles complete all as specified and directed by Engr-in-Charge.

M&L for vitrified tiles light coloured 10mm thick, polished, area of each tiles not exc 0.36 sqm, in floor, skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match

M&L Rolled section as in main and cross beams, hip and jack rafters, pirlins where connected to common rafter and running rails and guldes for sliding doors. Fixed with anngle cleats or other connecting plates Fe 410-W (Gde E-250)

M&L mild steel bolts purpose made (dia of neck n. Exc 12mm), with hexagonal or squate head one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long

M&L for MS plates (plain or corrugated) forming holes without any attachment Fe 410-W (Gde E-250)

S&F Mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing ,Fe 410-W, Gde E-250, complete, all as specified and directed by engineer-in-charge.

S&F Plain, black, mild steel sheeting, 1.25mm thick, in ridges, doors, hips, valley gutters, drip and straight flashings (length and girth as fixed), with welded or soldered provided complete, all as specified and directed by engineer-in-charge.

S&F for 25mm dia MS curtain rod with PVC coating (decorative type) fixed with MS hooks incl side brackets (both side) complete all as specified and as directed by Engineer-in-Charge.

M/S VIJAY TRADERS

NATHU RAM AND SONS