Providing Power Infrastructure & Street lights to Sub Layout-4 at Plot No. 11 of Hi-Tech Defense and Aerospace Park Industrial Area, Bengaluru Rural District.

Providing Power Infrastructure & Street lights to Sub Layout-4 at Plot No. 11 of Hi-Tech Defense and Aerospace Park Industrial Area, Bengaluru Rural District.

Part - A Providing DP Structure with 400A GOS D/B at 220/66/11KV Aerospace Sub-station

Supplying of DP structure using 9 Mtr long RCC poles with all lead and lift etc, as per specification and direct...

Supply of 11KV 400 amps GOS double break. with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of ‘H’frame for mounting GOS 11KV 400A Double break with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11KV 70/90KN disc insulator complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Guy set complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of spiral earth electrodes complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11 KV pin insulator with GI pins complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Strain Clamp, 3 Bolt type for Disc Insulator with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of ACSR Coyote ACSR (26/2.54 mm Al + 7/1.90 mm St), Std Wt: 521 Kg/KM for jumps with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of PG clamps Coyote to Coyote with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lift etc, as per specification and direction of Engineer in charge

Supply and fixing Anti-clambing device 12 Mtrs barbed wire with all lead and lift etc, as per specification and direction of Engineer in charge

Supply and fixing caution/board as per drawing with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg Good Quality well burnt Charcoal for groun...

Erection of DP structure using 9 Mtr long 145Kg, WL, RCC poles with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing Guy set with No.15 Strain Insulator complete with all lead and lift etc, as per specification and direction of Engineer in charge

Stringing of ACSR Coyote Conductor with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing spiral earth electrodes complete with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing of 11 KV 400 A GOS double break with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing of H frame for mounting 11 KV 400A GOS double break complete with all lead and lift etc, as per specification and direction of Engineer in charge

Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lift etc, as per specification and direction of Engineer in charge

PART - B Providing Triple pole structure inside the layout.

Supplying of 3 Pole Structure complete using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Pole) with all lead and lift etc, as per s...

Supply of 11KV 400 amps GOS double break with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of ‘H’frame for mounting GOS 11KV 400A Double break with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11KV 70/90KN disc insulator complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Guy set complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of spiral earth electrodes complete with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11 KV, 45KA Polymeric insulator with GI pins complete, (COMMON SR 2023-24 CDS-15)

Supply of PG clamps Coyote to Coyote with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lift etc, as per specification and direction of Engineer in charge

Supply and fixing Anti-clambing device 12 Mtrs barbed wire with all lead and lift etc, as per specification and direction of Engineer in charge

Supply and fixing caution/board as per drawing with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg Good Quality well burnt Charcoal for groun...

Erection of DP structure using 9 Mtr long RCC poles with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing Guy set complete with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing spiral earth electrodes complete with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing of 11 KV 400 A GOS double break with all lead and lift etc, as per specification and direction of Engineer in charge

Fixing of ‘H’ frame for mounting 11 KV 400A GOS double break complete with all lead and lift etc, as per specification and direction of Engineer in charge

Making of Earthing materials pipe type for grounding (Single Electrode with accessories) with all lead and lift etc, as per specification and direction of Engineer in charge

PART : C laying of 3CX400sqmm XLPE UG cable.

Supplying of 11 KV (E) 3 core 400 sqmm compacted circular aluminium conductor XLPE insulated screen with semicon & copper tape screened and colour strip w...

Supplying of HT heat shrinkable push on type 11KV 3 core 240 sqmm XLPE UG cable Indoor/Outdoor termination kit. Indoor termination kit with all lead and lift etc, as per specification and direction of...

Out door termination kit with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying of HT heat shrinkable straight through joint kit for 11KV 3 core 240 sqmm XLPE UG cable with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Artificial Manufacture sand with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Cable Covering Tiles 250x125x40 mm or 125x125x40 mm with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying of ‘B’ class 150mm dia GI pipe for culvert crossing and cable raising with all lead and lift etc, as per specification and direction of Engineer in charge

Laying of UG cable by Trench less technology by adopting horizontal baring and drawing of cables including preparation at side without HDPE pipe. a)Normal soil 6” bore size. with all lead and lift e...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading,...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depthnot exceedin g 300mm as per drawing and te...

Laying of high tension 11 KV(E) 3 core400 sqmm in existing trench/GI pipe/stone ware/RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff. a. 3X300 to 3X500sqmm with all l...

Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lift etc, as per specification and direction of Engineer in charge

Covering the cable with tile with all lead and lift etc, as per specification and direction of Engineer in charge

Refilling the cable Trenches with selected available earth from trench excavated including watering consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead of 2...

Making and fixing for 11 KV(E) 3 Core 400 sqmm heat shrinkable type pot head (indoor / out door). a.3X300 to 3X400 sqmm. with all lead and lift etc, as per specification and direction of Engineer in c...

Making and fixing for 11 KV (E) 3 core 400 sqmm heat shrinkable type straight through joint. a. 3X300 to 3X400 sqmm with all lead and lift etc, as per specification and direction of Engineer in charge

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary complete with all lead and lift e...

Laying of Route and Joint indicating stone. with all lead and lift etc, as per specification and direction of Engineer in charge

PART-D Extension of 11KV line using 3CX95sqmm UG Cable inside the layout fro RMU's to TC's

Supply of 11 kV, 3x95 Sqmm XLPE UG Cable with all lead and lift etc, as per specification and direction of E...

Supply of Cable Termination Kit Indoor HS Type Suitable for 95 Sqmm Cable with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Cable Termination Kit Outdoor HS Type Suitable for 95 Sqmm Cable with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Straight Through Jointing Kits HS Type suitable for 95 Sqmm Cable with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of manufacture sand for spreading and forming alround the UG cable with all lead and lift etc, as per specification and direction of Engineer in charge 1800x0.1x0.5=90

Supplying of ‘B’ class 100mm dia GI pipe for culvert crossing and cable raising with all lead and lift etc, as per specification and direction of Engineer in charge

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depthnot exceedin g 300mm as per...

Laying of high tension 11 KV(E) 3 core 95 sqmm in existing trench/GI pipe/stone ware/ RCC Hume pipe using wooden aluminum rollers as directed by the departmental staff. a. 3X300 to 3X500sqmm. with all...

Refilling the cable Trenches with selected available earth from trench excavated including watering consolidation in layers of 15cm thickness including depositing of the surplus earth with a lead of 2...

Making and fixing for 11 KV(E) 3 Core 95 sqmm heat shrinkable type pot head (indoor / out door). a.3X300 to 3X400 sqmm. with all lead and lift etc, as per specification and direction of Engineer in ch...

Making and fixing for 11 KV (E) 3 core 95 sqmm heat shrinkable type straight through joint. a. 3X300 to 3X400 sqmm with all lead and lift etc, as per specification and direction of Engineer in charge

Spreading and forming with sand all round the cable to a depth of 75mm and width of 500mm with all lead and lift etc, as per specification and direction of Engineer in charge

Covering the cable with tile with all lead and lift etc, as per specification and direction of Engineer in charge

Laying the GI pipe 80mm to 150mm dia at Drainage water supply crossing including fixing collars, bends tees and other fitting with cuts and threads wherever necessary complete with all lead and lift e...

Part - E Providing OD's & RMU's 350MVA, 630Amps

Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 5 Way RMU, 2 OD + 3 VL (One Incomer + Three Breaker...

Supply of RMU 3 Way, (2OD + 1VL,) One Incomer + One Breakers + One outgoing, 350 MVA, 630 Amp with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC- 62271/IS-3427 1 OD, 350 MVA, 630 Amps with all lead and lift etc, as per specification and direction of Engineer ...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm GI strip with all lead and lift etc, as per specification and direction of En...

Earth Excavation for RMU Foundation Depositing of earth on Bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr with all lead and lift etc, as per specification and direction of Engineer in charg...

Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates and at S/s, DTC's, OD's, RMU's & fencing legs with all lead and lift etc, as per specification and direction of...

Supply of Providing Reinforecement TMT Fe 550/550 D with all lead and lift etc, as per specification and direction of Engineer in charge

Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top an...

Supplying & fixing M.S rectangular poles made out of 2 equal angles of 65* 65*6 mm welded together & fixed in cc (1:2:4) with 2 nos 16mm dia M.S hold fast rods each of lenth 25 cms, Including cost of...

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial fill...

3 Panel with all lead and lift etc, as per specification and direction of Engineer in charge

1 Panel with all lead and lift etc, as per specification and direction of Engineer in charge

Lettering the RMU with enamel paint and also writing single line diagram of each panel, caution Board, Danger Board etc., including cost of Paint, Brush etc., with all lead and lift etc, as per specif...

Part F: Providing Transformer center on Spun Pole structure with 3 GOS system.

Supplying of Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL (Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS...

Supply of Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500 kVA (UG Cable) - GI with all lead and lift etc, as per specification and...

Supply of 11 kV, 200 Amps, Single Break GOS with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - Star 2 (5 Star Rated) with oil Cable entry type 250 kVA, Aluminium Wdg, Star 2 (5 Star)with all lead and lift etc, as per ...

Supply of 11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod) with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11 kV, 45 KN Polymeric Insulator with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supply of Caution/Danger Board with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Anti Climbing Device (12 Mtr GI Barbed Wire) with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of GI Wire 8 SWG with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Guy wire 7/10 SWG with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Al Lead Wire - 240 Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Heavy Duty Long Barrel Copper Lug-240 Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Spacer for DTC Wiring with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Fish Plate with necessary Clamps, bolts & nuts etc complete (Galvanised) with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of LT Metering box with CTs and necessary wiring for housing ETV Meter with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of LT Electronic Tri-Vector Meter 5 Amps, -0.5/1.0 Accuracy Class with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11 kV Lightning Arrester, Metal Oxide 9 kV, 5 kA Polymeric type with ground disconnector with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of LT Distribution box for 250 kVA with 2 no MCCB with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of 11 kV, Solid Core Type HG Fuse Unit with all lead and lift etc, as per specification and direction of Engineer in charge

Labour charges for erection 11kV/433V, 250 kVA, 3 Phase, 50 Cys Distribution Transformer BEE - 5 Star Rated with oil (with all lead and lift etc, as per specification and direction of Engineer in char...

Concreting materials for 11 Mtrs Spun Pole a) Base concreting 1:2:4, 1000x1000x150 mm b) Pole concreting 1:2:4, 1000x1000x2500 mm c) Coping 1:2:4 with all lead and lift etc, as per specification and...

PART : G Extension of LT line using 3.5CX240sqmm LT UG Cable from Transformer to Feeder pillar box

Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath 240sqmm Armoured LT...

Supply & making of Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 225/240/300 Sqmm with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of Straight Through Jointing Kit Suitable for 1.1 kV Class LTUG Cable as per IS-13573 240 Sqmm, 3.5/4 Core with all lead and lift etc, as per specification and direction of Engineer in charge

Supply of LT Feeder Piller Box (MS & Thermoset Plastic) 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar as per IS-13947 Part-1&2 Dwg No. ESCOM/GM/QS...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying & running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 50 x 6 mm GI strip with all lead and lift etc, as per specification and direction of En...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable 120 to 240 Sqmm with all lead and lift ...

Erection of LT Feeder piller box (MS & Thermoset Plastic Enclosure) including necessary civil works like soil excavation & concreting etc. complete with all lead and lift etc, as per specification and...

Making and fixing for 11 KV (E) 3 core 95 sqmm heat shrinkable type straight through joint. a. 3X300 to 3X400 sqmm with all lead and lift etc, as per specification and direction of Engineer in charge

PART : H Providing LED streetlights

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring stri...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 to 25 Sqmm with all lead and lift etc, as per specification ...

Supplying and Fixing GI Pipe B - Class as per IS-1239 50mm with all lead and lift etc, as per specification and direction of Engineer in charge

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws with all lead and lift etc, a...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50...

Supplying and drawing Flexible Multicore Cable manufacturedwith electrolytic grade flexible copper with low conductorconfirming to IS 8130-1984 and (Virgin) PVC insulation sheathedsuitable for working...

Supplying and drawing Flexible Multicore Cable manufacturedwith electrolytic grade flexible copper with low conductorconfirming to IS 8130-1984 and (Virgin) PVC insulation sheathedsuitable for working...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. with all lead and lifts complete as per specifications. 16 Amps with all lea...

Supply and fixing of a. GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg b. Good Quality well burnt ...

Supply & fixing of LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW) with all lead and lift etc, as per specifi...

Fabricating, supplying and erection of ... ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete Single Arm Bracket with 2000 mm Standa...

Supply of LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with h...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring

using suitable capacity wires. with all lead and lifts complete as pe...

Supply of Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, Apprx Wt: 11 with all lead and lift etc, as per specification and direction of Engineer in charge

Supplying and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947 b)60...

Supplying and fixing micro processor based electronic timer (without contactor Din mounting using necessary bolts, nuts and washers etc.,) 3-120 Sec setting with all lead and lift etc, as per specific...

Laying of UG cables by Trench less technology by adopting horizontal boring & drawing of cable including preparation at site) without HDPE pipe with all lead and lifts complete as per specifications. ...

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...

Supplying & Fixing minature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF energy cross-3 with short circuit breaking capaci...

Earth work excavation for pipelines/ cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution light...

Cable trench excavation, 1000x0.6x1=600, Ordinary soil with all lead and lift etc, as per specification and direction of Engineer in charge 1900x0.5x0.6=570

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Co...

Supply and laying of DWC Pipe 40 mm Dia with all lead and lift etc, as per specification and direction of Engineer in charge

KSRB 4.9.1: Providing mild steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, and Laying with binding w...