Construction of 400 metre Synthetic Track at Dharamshala, Distt. Kangra HP (Deposit work) .

Amount

Excavation in foundation, trenches etc. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseleing or any other mixed variety of soil, de-watering and/or removal of slush and incidentals, lift upto any heights, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre)layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like floor etc. as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers bressumers and lintels upto all depths as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like as per direction of Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement isto Six sand isto Twelve graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth under floor, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight graded broken/crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the compressive strength of 20N/mm2 (twenty newton per square millimeter) cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves their supports balconies, beams, girder, bressumers and cantilevers etc; as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying Tor steel reinforcement for reinforced cement concrete work including bending, binding, cutting, straighting and placing in position including cost of binding wires complete up to all floors levels as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement: Six sand) as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Second class half brick masonry in common burnt clay building bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (One cement isto Four sand) and curing complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing M.S. channels in doors and windows frames manufactured from M.S. channels section of 75x40x4mm ( seventy five into forty into four milimetres) and M.S, flat 75x4mm ( seventy five into four milimetres) combination as per design and drawing including hings, jamb, beed and if required thrashold of mild steel angle 50x25mm ( fifty into twenty five milimetres) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5mm ( two decimal five milimetre) thick with provision for locking arrangement and shock absorber as secified and applying a coat of approved steel primer after pretreatment of the surface, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing Plain M.S. grills of required patterns in steel/wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws or with welding as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm ( ffifty into forty seven millimetres)) with a wall thickness of 5mm ( five millimetres) made out of extruded 5mm ( five millimetres) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 two) Nos. of 150mm ( one hundred fifty millimeters) long brackets of 15mmx15mm ( fiftteen into fifteen millimetrees) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm ( nineteen into nineteen millimetres) M.S. square tube of 19 ( Nineteen) gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100 long with wooden or rawl plugs emedded in masonry complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm ( thirty millimetres) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 ( Nineteen ) gauge thickness and size of 19mm x19mm ( nineteen into nineteen millimetres) for styles and 15mmx15mm ( fifteen into fifteen millimetres) for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm ( thirty millimetres) thickness, 70mm ( seventy millimetres )width out of which 50mm ( fifteen millimetres) shall be flat and 20mm ( twenty millimetres) shall be tappred in 45 ( forty five) degree angle on either side forming style and 5mm ( five millimetres) thick, 95mm ( ninety millimetres) wide, PVC sheet out of which 75mm ( seventy millimetres) shall be flat and 20mm ( twenty millimetres) shall be tapered in 45( forty five) degree on the inner side to form top and bottom rail and 115mm ( one hundred fifteen millimetres) wide PVC sheet out of which 75mm ( seventy five millimetres) shall be flat and 20mm ( twenty millimetres) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm( ten millimetres) thick, 20mm ( twenty millimetres)wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm ( five millimetres) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm ( one hundred into fifty into one point ninety millimetres) size with necessary screws etc complete. as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into Sixteen milimetres) size Pilot/sheel or equivalent anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) size aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade and of approved make with necessary screws etc. handles with the necessary screws etc. complete. as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into Ten milimetres) size aluminium Pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etc.Tower bolts (Barrel type) as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying 30x45cm (Thirty into Forty five centimetres) of Orient/Bell/RAK white glazed tiles 6mm (Six milimetre) thick in dado or skirting laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement complete upto all floor level as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying spartic ceramic tiles antiskid of Orient/Bell/Somany/RAK first quiality approved shade 5.5 mm (Five decimal five milimetre) thick in flooring 300x300mm (Three hundred into Three hundred milimetre) size in treads of steps laid on a bed of 12mm (Twelve milimetre) thick cement mortar 1:3 (One cement isto Three sand) finished with flush pointing in white cement upto all floor level, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standerd rolled steel sections, joints mitred and welded with 16x3.15 mm (sixteen into three point one five) lugs 10 cm (ten centimetre) long embedded in cement concrete blocks 15 cmx10cmx10cm (fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimetre) nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh puty of approved make complete including applying a priming coat of red lead paint Top hung ventilators. as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel of Asian/ Nerolac paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter enamel paint other than white within all leads, lifts of materials and other incidentals. as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling in cement mortar 1:4 (One cement isto four sand) for all height above plinth level to floor all level as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( One cement isto six sand) as per H.P.P.W.D specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels including arises internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying Birla / J.K white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Finishing wall with Apex weather proof exterior grade emulsion of Asians Paints / Exterior Emulsion of Nerolac Suraksha paint as per approved shade approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Distempering (two or more coats) with acrylic oil bound washable distemper with Nerolac/ Asian of approved brand and manufacture and of required shade on undecorated wall surfaces soffits of slab to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth above plinth level to floor two level as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor within all leads, lifts of materials and other incidentals as per H.P.P.W.D specifications, approved drawing, design, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen millimetres) nominal bore

20mm (Twenty millimetres) nominal bore

Providing and fixing vitreous China Ordinary closet wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (Seat and over to be measured and paid for separately), as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing plastic seat solid type and cover of Hindware/cera/Jaquar of star white / snow white shade for wash down water closet with C.P. brass hinges and rubber buffers (white plastic seat and cover) as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing flat back No of 60002 of size 390 x 375x590mm (three hundred ninety into three hundred seventy five into five hundred ninety milimetres) size Hindware / Jaquare of star white / snow white shade vitreous China urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing vitreous china wash basin Delta No.10010 of Cera / Hindware 55x40 CM (fifty five into forty centimetre) with single hole for pillar tap with pedestal including C.I. or M.S. brackets, painted white including cutting holes and making good the same but excluding fittings as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) diametres C.P brass waste for wash basin and sink of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal waste for wash basin or sink complete as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty milimetres) beveled edge mirror of modiguard / autal / Galdin fish or superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers s per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetres) C.P. (Chromium plated) ISI Marked IS No. 8934 (Eight thousand nine hundred thirty four) of Jal/ESS ESS brass Towel rail / ring complete with C.P. (Chromium plated) brass brackets fixed to wooden plugs with C.P.(Chromium plated) brass screws complete s per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass shelf of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal with C.P. brass. (Heavy duty makes ISI marked) brackets and guard rail complete fixed to wooden plugs with C.P. brass screws as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal s per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing chromium plated.(Heavy duty makes ISI marked is No. 8931 & 8934) brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws, as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 600x300mm (Six hundred into Three hundred milimetres) vitreous china division plate for urinal as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre nominal bore chromium plated ISI marked fancy bib tap of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of jal as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) diametres C.P. brass pillar tap with capstan Head of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) diametres C.P.brass angle valve without nuts of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore PVC connection with brass union 300/450mm length ( three hundred/ four hundred fifty milimetres) length as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetres) length as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing ( chromium plated) brass full way valve with wheel I.S.I. marked I.S. No. 8934 of Jal/ESS ESS as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

15mm (Fifteen millimetres) nominal bore

20mm (Twenty millimetres) nominal bore

Providing and placing water tank make P.V.C. SINTEX or equivalent having capacity of 500 (five hundred) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and placing water tank make P.V.C. SINTEX or equivalent having capacity of 1000 (One thousand) liters each tank with necessary fittings including over flow pipe scour pipe etcetera and pads required for in let and out let ball valve with cover and locking arrangements complete in all respect within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete, within all leads, lifts of materials and other incidentals

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked including fixing with approved adhesive etc. complete including entire carriage of materials as per the direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

150mm (One hundred fifty milimetres) diametres

110mm (One hundred ten milimetres) diametres

75 mm (Seventy five milimetres) diametres

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts complete including fixing with approved adhesive etc. complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

90mm ( Ninety milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three millimetres) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

90mm ( Ninety milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing P.V.C. Hindware /Cera /Jaquar or its equivalent Collar ISI marked confirming to BIS-14735 including fixing with approved adhesive complete, as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

150mm (One hundred fifty milimetres) diametres

90mm ( Ninety milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing P.V.C. Supreme/ Kishan/ Astral pipe fittings and accessories for sewerage pipe confirm to IS No. 14735-99 (Fourteen thousand seven hundred thirty five - ninety nine) plain bend complete including fixing with approved adhesive as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

150mm (One hundred fifty milimetres) diametres

90mm ( Ninety milimetres) diametres

75mm ( Seventy five milimetres) diametres

Providing and fixing marked including fixing PVC offset 450 complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

90mm (Ninety millimetres) diametres

75mm (Seventy five millimetres) diametres

Providing and fixing PTMT coloured/ white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm ( fifteen millimtres) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately)t as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and Fixing 32mm ( thirty two millimeters) nominal bore PVC waste coupling of approved quality and colour as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing C.P. jet spray of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of approved quality and colour with one metre tube as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal for gully floor or Nahni trap as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the following internal diameters, necessary form work and curing complete as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 500mm(Five hundred milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed/broken stone aggregate 40mm(Forty milimetres nominal size) inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetres) 1000mm(one thousand milimetres) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred and ten milimetres) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilograms) weight of cover 23Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 200mm (Two hundred milimetres) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) within all leads, lifts of materials and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Excavation in drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseleing or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing grab bar chromium plated 40mm ( forty millimetres) dia & 300mm( three hundred millimetres) long steel pipe at 78 cm ( seventy eight centimetres) height with M.S plates as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing in position collapsible steel shutters with vertical channels 20 x10 x2mm (Twenty into Ten into Two millimetres) and braced with flat iron diagonals 20 x5mm (Twenty into Five millimetres) size with top and bottom rails of T-iron 40x40x6mm (Forty into Forty into Six millimetres) with 38mm (Thirty eight millimetres) diametres steel pulley complete with bolts and nuts locking arrangements, stoppers, handles, including applying a priming coat of red lead paint. as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint In gratings framed guard bars,ladders,railling,brackets and similar works as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata / sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing plain M.S. B.P. iron sheet 1.66mm (One decimal sixty six millimeter) thick fixed in eaves board / facia / soffits /ceiling including jointing with gas/ electric welding in position complete (frame work is to be measured and laid for separately as per direction of Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, sale tax or any type of taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60cm (Zero decimal Sixty centimetres) thick prepainted steel sheet ISI marked - Z 120 of approved make in ridges (Factory made) shall be having proper Gola/Shape of steel sheet Tata/ Sakti or equivalent with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) diametres with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Providing and fixing 6mm plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately as per specification, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Vinod