Construction of New Anganwadi Building At Various Places In Gandhinagar Taluka Package No 02 Year 2025-26 , Dist.: Gandhinagar.

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Excavation for foundation upto 1.50mt. Depth

including sorting out and stacking of useful

1 materials and disposing of the excavated stuff 99.000 Cum 123.13

as directed with in all lead & Lift (A) Loose or

Soft soil.

Excavation for foundation upto 1.50mt. Depth

including sorting out and stacking of useful

2 materials and disposing of the excavated stuff 26.10 Cum 157.16

as directed with in all lead & Lift (B) Dense or

Filling foundation and plinth with sand under

3 floors including watering, ramming and 27.00 Cum 481.70

consolidating dressing etc, comp.

Filling available excavated earth excluding

rock in trenches plinth side of foundation etc.

4 in layer not exceeding 20cm. In depth 75.06 Cum 136.92

consolidation each deposited layer by

ramming and watering.

Filling foundation and plinth with murrum or

including watering, ramming and consolidating

etc. comp.

Applying general insecticide pest control

treatment to floors, cupboards etc including

labour materials etc. complete. Using

Imidacloprid 30.5 SC as Per IS 6313 part-II

6 (0.075% concentration by mass) is 129.00 Sqm. 91.63

recommended 10.5ml chemical diluted with

liters of water application 0.5 litre

chemical/Sqm of surface is recommended as

Providing and laying cement concrete 1:2:4 (1-

Cement : 2-Coarse sand : 4-graded stone

7 aggregates 20 mm nominal size) and curing 7.80 Cum 4365.22

complete including cost of formwork in (A)

Foundation and Plinth

Providing and laying cement concret 1:1.5:3

(1 Cement : 1.5 coase sand : 3 graded stone

aggregrate 20mm nominal size) and curing

8 complete excluding cost of form work and 8.70 Cum 5457.03

reinforcement for reinforced cement concrete

work in (a) Foundation footing base of column

and mass concrete

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying nominal cement concrete

M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2

coarse sand : 3 graded stone aregate 20 mm.

Nominal size) including finishing smooth with

curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in column Upto plinth level.

Providing & laying cement concrete 1: 3 : 6 (

Cement : 3 Coarse sand : 6 graded B.T stone

10 aggregate 20mm nominal size) Curing comp. 36.00 Cum 3396.68

including cost of form work in foundation and

Providing and laying nominal cement concrete

M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2

coarse sand : 3 graded stone aregate 20 mm.

Nominal size) including finishing smooth with

curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work in column for All Floor

Providing and laying nominal cement concrete

M-200 in R.C.C. 1:1 1/2 :3 (1 cement :1 1/2

coarse sand : 3 graded stone aregate 20 mm.

Nominal size) including finishing smooth with

curing complete including the cost of form

work but excluding the cost of reinforcement

for R.C.C. work (c) PLINTH BEAM

Providing and laying nominal cement concrete

M-150 in R.C.C. 1:2 :4 (1 cement : 2 coarse

sand : 4 graded stone aregate 20 mm.

13 Nominal size) including finishing smooth with 9.60 Cum. 4499.55

curing complete but excluding the cost of

reinforcement for R.C.C. work PLINTH Slab.

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2

coarse sand : 3 graded stone aregate 20 mm.

14 Nominal size) including finishing smooth with 9.30 Cum. 6964.03

curing complete but excluding the cost of

reinforcement for R.C.C. work in BEAMS For

All Floor.

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1/2

coarse sand : 3 graded stone aregate 20 mm.

15 Nominal size) including finishing smooth with 3.90 Cum. 7643.22

curing complete but excluding the cost of

reinforcement for R.C.C. work in LINTELS All

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2

coarse sand : 3 graded stone aregate 20 mm.

16 Nominal size) including finishing smooth with 0.90 Cum. 6862.30

curing complete but excluding the cost of

reinforcement for R.C.C. work in CHHAJJAS

All Floor.

Providing and laying nominal cement concrete

M-200 in R.C.C. 1: 1 1/2 : 3 (1 cement :1 1/2

coarse sand : 3 graded stone aregate 20 mm.

17 Nominal size) including finishing smooth with 27.00 Cum 6508.30

curing complete but excluding the cost of

reinforcement for R.C.C. work in slabs for All

Providing T.M.T. bar FE500/500D

reinforcement confirmed to for R.C.C. work

18 including bending, binding, and placing. In 9090.00 Kg 77.29

position comp. Up to floor two level. For All

Brick work using common burnt clay building

bricks having crushing strength not less than

19 35 Kg./Sq.m. in foundation and plinth in 33.00 Cum 4214.09

cement mortar 1:6 (1 cement:6 fine sand) (b)

Conventional.

Brick work using common burnt clay building

bricks having crushing strength not less than

35 Kg./ Sqm. in cement mortar 1:6 ( 1 cement

: 6 Fine sand ) in super structure above plinth

level upto floor two level ( for G.F )

Conventional

Half brick masonary in common burnt clay

building bricks having crushing strength not

less than 35kg./sq.cm. in cement mortar 1:3 (1

cement : 3 coarse sand ) with 2nos. of 6mm

dia mild steel round bars every three coarse

embedded in cement mortar in superstructure

for Ground floor (Conventional)

Providing and fixing door Single shutter

mm.thick flush door teak wood beading 75 x

35mm including both side in situ laminate with

18mm thick granite frame 6 Lever Mortice lock

22 , SS Aldrop 30cm long, SS Handle size 15 Cm 17.10 Sqm. 6386.23

Long, Tower Bolt size 20 cm etc. as per detail

colour & pattern approved by this office

including necessary anodized alluminum

fixtures and fastenings.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and fixing Anodized Alluminum

Section Jindal Deluxe Sliding Window System

C (30mm) series sction memebers THREE

track window section bottom track

frame top & side 21203, shutter frame top rail

23 & bottom rail 20993, side rail 20553, lock rail 14.40 Sqm 3903.65

20550 with 5mm thick transparent plain float

glass, with transparent silicon sealant with

allu. anosized coated fittings and fixture etc

Providing and fixing standared extruded of

alluminium section of size 63mm x 38.10mm x

1.2mm @ Wt. 0.643 Kg/mt) with colour

anodized alluminium frame for ventilation with

5 mm thick frosted glass as details etc

complete for Ventilation {Colour as directed by

Engineer in charge except black & Alluminum

section and glass

Providing and fixing Safty grills of required

pattern for windows 12mm dia M.S. round Bar

at required spacing M.S. Flat 25mm x 5mm

thick as per design and hold fasting with

coach bolts including one coat of primer and

Shall be Painting with Enamel Paint and

Colour approved by as per site Engineer etc

Providing and laying Machine cut, Free edges,

Machine polished Granite stone slab 18 mm

thick {Single piece not more than 150 cm } for

stair steps and riser as per design incl. full

moulded round front edge & 1 cm nosing &

necessary groobe on trade of steps laid on

mm thick cement mortar 1:6 (1 -cement :

coarse sand ) jointed with grey cement slurry

including rubbing and polishing etc. complete

Providing and laying Both side mirror polished

Granite stone slab 18 mm (Average) thick of

approved quality incl. full moulded round front

27 edge fixed in wall for Shalves and jointed with 18.00 Sqm 1968.49

grey cement slurry including rubbing and

polishing etc. complete

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying 60 x 60cm Soluble Salt

Vitrified tiles 8 to 10 mm thick with pattern

colour & Shade as detailed approve by

architect ( 10% Dark colour tiles Pattern ) in

flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand) finishing with flush

pointing in white cement.

Providing and laying 60 x 60cm Soluble salt

Vitrified tiles 8 to 10 mm thick with pattern

colour & Shade as detailed approve by

architect ( 10% Dark colour tiles Pattern ) in

skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry

Providing and laying 30cm x 30cm in size

Ceramic tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand

) finishing with flush pointing in white cement

Providing and laying 30 x 60Cm size premium

printed glazed tiles 6mm thick in skrting risers

of steps and dedo on 10mm thick cement

plaster 1:3 (1-cement : 3-coarse sand) and

jointed with white cement slurry

Provding and filling the joint with epoxy grout

3 mm width and 8 to 10 mm deep, including

cost of necessary materials, PVC spacers,

32 filling grout and cleaning etc complete as 42.00 Sqm 40.40

directed by engineer in charge. { Colour and

Pattern as directed by engineer in charge.}

Providing and fixing pre-cast Rubber Dye /

steel Dye inter locking concrete block 60mm

thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as

33 per approved design Confirming to IS 15658 : 48.00 Sqm 706.90

2006 including 35 mm Sand layer for levelling

and filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and laying water proofing tretment

with chaina mosaic tiles flooring over avg

mm C.C. 1:2:4 ( 1 Cement, 2 sand, 1 Kapchi

20mm + 3 grit 6mm to 10mm ) bedding for

maintaining slope for plain and curve surface

& 12 mm to 20 mm of broken piece of ceramic

/ glazed tiles ( one or more color as directed )

to be laid over cement mortar bedding of C M

1:3 (1 cement : 3 sand ) containg one Kg. of

34 water profing materials per bag of O P C at 195.00 Sqm 1102.92

plain or / and slops and to be tempered to

bring mortar ceramic up to surface with using

white cement and colour pigment including

rounding of junctions and extending them up

to 15 cm along the wall and curing with bends

any pattens or design as per drawing and

cleaning by using oxalic acid etc complete.

Providing and laying Mirror polished Machine

polished Grenite stone slab 18mm thick for

doors & windows sill & Jams cladding as per

design including full moulded round front

steps & 1cm nosing & necessary groove on

35 trads of steps ;laid on 20mm thick cement 24.00 Sqm 3395.62

mortar 1:6 ( 1 cement : 6 coarse sand ) jointed

with gray cement sluury including rubbing and

polsihing etc. complete.for Doors / windows

sill & jams cladding.

Providing 20 mm thick double coat mala

cement plaster on interior brick / concrete

work for plastering comprising of base coat of

12 mm thick cement plaster in cement mortar

36 (1 Cement : 4 coarse sand) in rough finishing 309.00 Sqm 286.10

and 8 mm thick top coat of cement mortar 1:2

(1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc.

complete. For Ground Floor

Providing 10mm thick cement plaster in single

coat on brick/concrete walls for interior

plastering upto floor two level and finished

37 even and smooth in (i) Cement mortar 1:3 (1- 132.00 Sqm 211.98

cement:3-sand) including finishing with a

flating coat of neat cement slurry etc.

complete. for Ground Floor

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade

including thoroughly brushing the surface free

from mortar dropping and other foreign matter

and sand papered smooth.

Wall painting one coats of primer of approved

brand (three coats) plastic emulsion paint of

approved brand and manufacture on

undecorated wall surface to give an even

shade including throughly brushing the

surface free from mortar droppings and other

foreign matter and sand papered smooth.

Wall painting one coats of primer of approved

brand & (three coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated ceiling surface to give an even

shade including throughly brushing the

surface free from mortar dropping sand other

foreign matter and sand papered smooth.

20mm thick sand faced cement plaster on

walls upto height 10 metres above ground

level consisting of 12mm thick backing coat of

C.M. 1:3 (1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand)

with 1cm x 1cm groovs as per pattern sample

approved by the engineer incharge etc.

Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials. [B]

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing laying and jointing in true line and

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.[D]

Providing and fixing uPVC Heavy Duty Handle

valve of aprroved brand and Quality with

45 required fitting and adhesive incl. fixing the 3.00 Nos. 469.65

same with new pipe line as directed by

engineer in charge. (B) 25mm dia.,

Providing and fixing uPVC Heavy Duty Handle

valve of aprroved brand and Quality with

46 required fitting and adhesive incl. fixing the 3.00 Nos. 685.79

same with new pipe line as directed by

engineer in charge. (C) 40mm dia.,

Providing, laying and jointing in true line and

level 75 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

47 using of PVC clamp of the size 110 mm 6.00 Rmt. 756.22

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

Providing and fixing to wall ceiling and floor

10.0 Kg. F/Cm2 working pressure poluthene

pipes of the following outside Dia. Low

48 densidy, complete with special flange 27.00 Rmt. 338.95

compression type fittings, wall clipsetc.

including making good the wall ceiling and

floor.(A) 110mm dia.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing, laying and jointing in true line and

level 110 diametre U.P.V.C (Type B)

conforming to IS 13592-1992 with one end

plain and other end socketed with rubber ring,

& fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall

49 using of PVC clamp of the size 110 mm 15.00 Rmt. 876.90

diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and

jointed with adhesive solvent cement including

cost of all materials.

Providing and fixing PVC SWR Nahni trap IS

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self

cleansing design with C.I scread down or

hinged grating including the cost of cutting

and making good

Providing and fixing screw down quarter turn

heavy duty bib taps of following size (A) Brass

51 chromium plated screw down bib tap (i) 15mm 6.00 Nos. 186.83

dia. ( Plumber, Mark, Escco or equivalent

Providing and fixing CP brass Quarter turn

pillar tap, capstan head screw down high

52 pressure with screw, shanks and back nuts 6.00 Nos. 308.73

(A) 15 mm dia {Jaquar< Plumber, Mark Long

pipe or equivalent brand}

Providing and fixing wash basin with pedestal

of std. Height with single hole for pillar tap with

C.I or M.S brackets painted white including

cutting cutting holes and making good the

same including C.P. brass waste and waste

pipes and bottal trap (A) Vitreous China: (ii)

Flat Back washbasin 550 mm x 400mm

size.In colour.

Provision and fixing water closet squatting

orissa type W.C. pan size 580mm integral

footrest and 100 mm P or S trap and in

cluding 25 mm dia CP brass flush valve and

GI inlet connection etc comp. (A) Vitreous

china long pattern white or color

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing erecting and fixing double coated 4-

layer tough virgin plast ISI water tank of

55 required capacity each with all necessary 3000.00 Litre 10.61

fittings and connection etc. complete on

Providing and fixing 600mm x 450mm

bevelled edge mirrror of superior glass

56 mounted on 6mm thick A.C. sheet or plywood 3.00 No. 859.41

sheet and fixing to wooden pluge with C.P.

brass screws and washers.

Providing and fixing C.P. brass towel rail

comlete with C.P. brass brackets fixed to

wooden plugs with C.P. brass scews.(B)

600mm x 20mm size.

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P of R type

Providing and fixing CP brass screw down

stop cock of approved quality 15mm size with

adjustable wall flange..or as per instrction of

engineer incharge.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions, total weight of cover with

frame to be not less than 38Kg. (Wt. of cover

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

60 slabe with 1:2:4 mix (1-cement :2- coarse 9.00 No. 2932.93

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside

dimensions 455mmx 610mm and 450mm

deep for single pipe line.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Constructing brick masonry chamber for

underground C.I. Inspection chamber and

bends with briocks having croshing strength

not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top

61 slab with 1:2:4 mix (1-cement :2- coarse sand 3.00 No. 3660.76

:4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and

450mm deep for pipe line with one or two

Providing sock pit of 8.00 Cmt. Volume

including excavating and filling brickbats with

dry masonry work at top for 45cm. height

including covering the top with stone including

providing vatas in C.M. 1:3 with finishing

curing etc. complete as directed.

Finishing wall with weather proof exterior

emulsion paint on wall surface (two coats) to

give an required shape even shade after

thoroughly brushing the surface to remove all

dirt, and remains of loose powdered

materials.etc complete

Constructing Sandwitch Platform of 16 to

mm thick Polished Black Granite at top and

mm thick Kota stone slab using cement mortar

1:3 for sandwich and fitting at bottom & edges

with waterproof rigid adhesives including

macking necessary grooves in walls with

64 Vertical Kotastone 30 mm x 2 No sandwitch 9.00 Sqm 5868.10

thick every 60 cm centre to cenre including all

labour material of approved quality incl. full

moulded round front edge fixed in wall for

partition and jointed with grey cement slurry

including rubbing and polishing etc. complete

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and fixing stainless steel kitchen

sink glossy ASIS 304 grade and 1 mm thick

with overall size 610mm x 460mm x 330mm

deep having bowl size 510mm x410mm x

200mm of Nirali or equivalent brand with all

fittings CI or MS brackets painted white or

fixing on stone base including cutting holes

and making good the same including brass

valve and fisher union fitting including all

necessary fittings

Providing thoruting or plaster drip and

moulding to R.C.C. chhajja.

Writing letter or figures on any surface with

black Japan paint (stops, comas, hyphens and

the like not to be measured and paid for

separately) (ii) Indian (Letters/Figures)

Providing water harvesting pit 1.50 mt dia x

2.40 mt depth with excavation in any strata

filling the pit with brick bats in 0.60 mt depth,

0.30 mt with 25mm to 40mm kapchi 0.30 mt

with 10mm to 20mm kapchi & 2.00 mm depth

with coarse sand in layer including maing the

lines (PVC) for water inlet etc. as directed etc,

Supplying & installing of Dry Chemical Powder

type 6 Kg. Capacity fire extinguisher as per

I.S. 2171 ISI. Mark with necessary fittings etc.

Providing and fixing 90 cm high Stainless

steel railing made from anticorrocive S S pipe

of 50 mm dia (16Gauge) as hand rail with S

S 38 mm dia (16Gauge) as a vertical support

fixed in RCC slab at 1.2m c/c including three

horizontal S S pipes of 25 mm dia (16Gauge)

at eqal distance fixed by 18.75 mm dia

(16Gauge) S S pipe including accessories as

per detailed drawing as directed etc.

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Point wiring for Light / Bell with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length

in below type of pipe erected with 6A Modular

type switch / bell push & accessories and

earth continuity of following type, erected on

PVC / Metallic/ Wooden box, single mounting

71 base frame covered with extured/ metallic/ 75.00 Pt. 419.15

white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder/ ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC

pipe and accessories erected flushed on

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected with 6A

Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following

72 type erected on PVC / Metallic/Wooden box, 9.00 Pt. 598.93

single mounting base frame covered with

textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose /

H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length,

in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with

73 appropriate front plate modules erected on / in 6.00 Pt. 445.41

wall / ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board (a) with medium

class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

PVC / Metallic/Wooden box, single mounting

74 base frame covered with textured / 6.00 Pt. 241.39

metallic/white front plate modules erected on

/ in wall / ceiling with following type

accessories , Cat. III.

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete

to be erected on/in wall or ceiling erected with

75 necessary PVC fittings & Junction boxes fixed 240.00 Meter 23.23

with adhesive solution & Clamps with

following dia of pipes, in approved manner as

directed (A) 20 mm

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm

76 150.00 Meter 78.78

copper conductor FRLS PVC insulated

stranded wire of green colour for earth

continuity of following size (A) With medium

class Rigid PVC pipe and accessories. (b)

wire 2.5 sq. mm

Providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC

77 90.00 Meter 107.06

insulated stranded wire of green colour for

earth continuity of following size (A) with

medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

Providing & erecting Sheet Steel Powder

Coated MCB Distribution Board Flush/Surface

Mounted Fitted With Busbar Netural Link

78 Earth Bar and Din Rail Confirming to BS: 5486- 3.00 Each 326.23

1986 without MCB to House Appropriate Nos

of MCBs. (F) Single Phase 8 Way Double

Door CAT-III

Providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

ISI Mark (A) 6 to 32 Amp. CAT-III

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

PROVIDING AND ERECTING DOUBLE

POLE MCB ISOLATOR A.C.22 DUTY

CONFIRMS TO IS13947-3 240V 40 IN

80 EXISTING BOX. CAT-III 3.00 Each 313.10

Approved Make ELCBs/RCCBs Conforming to

IS12640 and Having Sesitivity of 30Ma and

Short Circuit Withstand Capacity of 6KA and

Suitable for Operation on Single Phase 240V

Having Characteristic of Quick Action &

81 Tripping with All Advance Feature & Do not 3.00 Each 2235.13

Incorporate any electronic component for

Following Max Rating Erected as Directed (ii)

40AMPS.DP CAT-III

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT

3000 K to 6500K, Luminaire efficacy>

82 lumens/watt ,LED LED driver efficiency > 85 18.00 Each 373.70

% ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (iv) 22-24

Watts, Surge - 2KV,IP-20, conventional 4 feet

Supplying and erecting led lamps with

following wattage capacity of 220 to

voltage, minimum 15000 burning hours life,

83 500 V in built-surge protection, Polycarbonate 6.00 Each 112.11

diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (ii) 5 to 8 watts

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

Providing and erecting Approved make

Ceiling fan with double ball bearing ISI mark

with condenser A.C. 23OV.50 c/s.1200 mm.

84 sweep complete, canopy erected on existing 9.00 Each 1596.81

hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

Providing & erecting Switch board for

Computer or electric apparatus consisting of

following modular type accessories mounted

with PVC / Metallic concealed/open box with

single mounting base frame covered with

85 textured/metallic /white front plate,modules 6.00 Each 1081.71

erected with necessary connections as

directed. 1 no. 6A/16A universal plug-switch

combined. 3 nos. 6A Switch. 3 nos. 6A 5 pin

Plug For Modular Type Accessories

Decorative call bell Ting-tong box type

volts complete erected.

Providing and erecting Pipe type earthing with

40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed (For panel)

For using salt and charcoal / coke as required

88 for pipe type earthing. 3.00 Each 171.70

Description of Item

Item Rate In

(with brief specification and reference to Quantity Unit Amount

No. figures

book of specifications)

MGVC Ltd. meter connection charges

Total Rs.

Rupees ThirtyEight Lakh ThirtyNine Thousand Five Hundred Twelve and Paisa TwentyOne Only

I / We / am/are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rates mentioned above. Amount of

my/our tender Works out as under.

Estimated Amount Estimated Amount

put to tender Rs. _________ put to tender Rs. _________

Deduct_______% below Add_______% above

Net Rs._________ Net Rs._________

in words ___________ in words ___________

The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

4 R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Dismentalling of Credit materials amounting of Rs. 0.00 must be recovered from Contractor's

respective R.A. Bill.

Signature of Contractor

Dy. Executive Engineer Executive Engineer

Panchayat R.&B Sub Division Panchayat R.&B.Division

Gandhinagar Gandhinagar