Providing Octagonal Poles with Street Lights at Timber Yard Road, Warehouse Road, Railway Marshalling Yard Road and allied works at NMPA

Amount

Design, Fabrication, supplying and erection of 9 Mtrs long hot dip Galvanized, Octagonal Street light poles with BSEN 10025 GRADE S355JO steel plate for shaft, IS 2062 for base plate with door opening arrangements , including suitable boards, Bakelite sheet and MCB’s as per IS specifications suitable to withstand the wind speed of 47 m/s for 9 Mtr Pole in single section and single joint welded as per IS 9595/IS10178AWS having dimensions bottom 155mm dia , top 70mm dia. with 3mm thick suitable base plate 260X260X16mm, PCD 250mm and foundation bolts M24X750mm long 4 nos. ‘’ J’’ type along with template and the Pole shall be hot dip galvanized in single dipping with not less than 65micron as per ASTM-A123 and 153 etc. (excluding foundation) as per drawing appended. As per Technical Specification. a) 9m-Top 70mm and Bottom 155mm dia

Providing foundation for 9 mtrs Octagonal pole including removal interlock, sand, breaking of concrete, Excavation and making of RCC foundation using M20 concrete, steel reinforcement, shuttering complete as per pole supplies approved foundation drawing or depending upon site condition. All supply materials included in this item and re-coloring.

Removing and Resetting existing Heavy duty cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using cement and 40mm thick sand bed (average thickness) and compacting with plate vibrator to achieve final desired compaction and setting of paver to its final level, including cost of materials, labour and usage charges of machinery complete as per specifications.

Supplying and fixing of Hot dip Galvanized M.S. Bracket suitable for outdoor Luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.

Providing foundation for 9 mtrs Octagonal pole including Earth Excavation and making of RCC foundation using M 20 concrete, steel reinforcement, shuttering complete as per pole suppliers approved foundation drawing or depending upon site condition. (All supply materials included in this item).

Supply of LED streetlight luminaire with pressure are cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output rated life Burning Hrs 5000hr @Lumen Maintenance of 70%,maximum light intensity should be between 60 degree to 70degree.CCT>5500k,IP66 optical and electrical compartment &impact resistance of complete luminaire>1K08. Power factor>0.9 with mains, Surge Protection -Min 5KV along with Over voltage /Overload/Short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79& LM 80 Adherence with RoHS, UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location minimized minimal tools. LED Light fixture with 120W System power consumption. LED Efficiency>130lm/w, nominal CRI>75. Luminaire manufacture should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified ISO 9001:2008.Housing with Supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 years against any manufacturing defect. a) LED Street Light 150W

Supply of LED Flood light luminaire with pressure are cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output rated life Burning Hrs 5000hr @Lumen Maintenance of 70%,maximum light intensity should be between 60 degree to 70degree.CCT>5500k,IP66 optical and electrical compartment &impact resistance of complete luminaire>1K08. Power factor>0.9 with mains, Surge Protection -Min 5KV along with Over voltage /Overload/Short circuit/miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79& LM 80 Adherence with RoHS, UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location minimized minimal tools. LED Light fixture with 150W System power consumption. LED Efficiency>130lm/w, nominal CRI>75. Luminaire manufacture should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified ISO 9001:2008.Housing with Supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warranty of 2 years against any manufacturing defect. a) LED Flood Light 150W

Fixing of 150W LED Street Light fitting over existing pole/wall ceiling including clamps, bolts, nuts and wiring using suitable wires.

Supply and drawing Flexible Multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage up to 1100 volts as per IS-694:1990. a) 3C X 2.5 sq.mm

Supplying of 1.1KV, XLPE insulated, PVC extruded inner sheathed Armoured LT UG Cable as per IS-7098 Part-I, Armouring strip thickness and resistivity as per IS-3975. a) 4C x 16 Sq.mm

Supplying of 1.1KV, XLPE insulated, PVC extruded inner sheathed Armoured LT UG Cable as per IS-7098 Part-I, Armouring strip thickness and resistivity as per IS-3975. a) 3.5C X 35 Sq.mm

Supplying of 1.1KV, XLPE insulated, PVC extruded inner sheathed Armoured LT UG Cable as per IS-7098 Part-I, Armouring strip thickness and resistivity as per IS-3975. a) 3.5C X 120 Sq.mm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 4C x 16 sq.mm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 3.5C x 35 sq.mm

Labour charges for laying of 1.1 KV class XLPE LT UG Cable in existing trench / GI pipe / Stoneware pipe / on pole/on concrete wall as required. a) 3.5C x 120 sq.mm

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr. Including trial pits, depositing on bank upto a lead of 50mtr. Supplying and Displaying necessary Danger boards and Lighting. Digging of trench of 1 meter deep x 0.5 meter wide, refilling the trench to the required ground level and consolidating etc., complete. a) In Hard soil

Demolishing cement concrete manually/by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-Charge.

Providing and Laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of materials, quality confirming to the requirements of relevant IS codes, labour, usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. a) M20 Design Mix using 20mm nominal size graded crushed coarse aggregates.

Supplying and laying reinforced cement concrete pipe NP3 for culverts including pointing ends and fixing collars with cement mortar 1:2 including cost of materials, labour, HOM complete as per specifications, curing complete as per specifications No.KSRB1000/2300 a) 300mm dia

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles/ on poles/structure drawing the cable with supply and fixing DWC pipe with Aluminium clamps and stainless steel screws as required for drawing the cable as complete job. a) 90mm OD/76mm ID.

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles/ on poles/structure drawing the cable with supply and fixing DWC pipe with Aluminium clamps and stainless steel screws as required for drawing the cable as complete job. a) 63mm OD/50mm ID.

Supplying and laying Double walled corrugated DWC HDPE pipe as per IS 14930 part II with necessary connecting sockets, couplings, Tees, bends, End - caps of same materials in existing trench/duct/pole/on wall/on black stone wall with SS saddles/ on poles/structure drawing the cable with supply and fixing DWC pipe with Aluminium clamps and stainless steel screws as required for drawing the cable as complete job. a) 40mm OD/32mm ID

Supplying and making end termination with glands, lugs of LT cable. a) 4C x 16 Sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 3.5C x 35 Sq.mm

Supplying and making end termination with glands, lugs of LT cable. a) 3.5C x 120 Sq.mm

Supplying, fixing and wiring earth electrode for panel and street lights using 40 mm dia. 2.90 mm thick GI pipe 2.5 Mtr long with funnel with mesh and suitable size reducer fixed on the top of the Electrode. The funnel should be enclosed in a CC chamber of 400x400x400 mm with cast iron cover. The electrode shall have staggered holes of 12mm dia and the electrode covered 150mm alround with alternate layers of salt and char coal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.

Supplying and running 25x6mm GI strip for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/ spacers etc.

Supplying and fixing of street light timer box of size 300x600x170mm made of thermoplastic modular panel with lid, shock proof, IP 65 having internally embedded gasket on both lid and flap with hylum sheet, din rail with 10sqmm copper wire as complete and consisting of following components, a) 63A TPN MCB -1 No. b) MNX 40A 4-pole Contactor -1 No. c) 20A TPN MCB -2 No’s d) 24 Hrs. Time switch -1 No. e) 40A Connectors -10 Nos.

Supplying and fixing of hot dip Galvanized MS circular bracket of ID 750mm, fabricated with 4omm dia. pipe, head frame & supports, mounting plates suitable for mounting 4 Nos. outdoor LED flood light luminaries on 9 mtr Octagonal pole using necessa4r bolts, nuts etc. complete. All the hardware shall be GI/stainless steel only.

Supply and fixing of Spiral Earth Electrodes as per standard technical specifications as per ESCOM.

Supply and Installation of Cable Route Marker made up of RCC block of size 100cm (H) X 50cm (W) X 6cm (D) indicating Embossed text as NMPA LT Cable with Yellow paint and Red colour letters are fixing with cement concrete.

Releasing and relaying the Railway ballast to facilitate the Railway Marshalling yard Railway track.

Supplying and fixing of Class B GI pipe as per IS: 1239.

Releasing of 9 Mtrs RCC street light Poles and Brackets with Light fittings from the site and shifted to Electrical Sub Division-I

SHRI SOMALINGESHWARA ELECTRICALS (BID ID -3325150)

M/s. Precision Electrical Works (BID ID -3324870)

ANU ELECTRICALS (BID ID -3324436)

Limra Electricals (BID ID -3325156)