Construction of Sub Employment Exchange building at Ghumarwin Distt. Bilaspur (HP).

Amount

Cutting in earth work and disposal of excavated earth upto a lead of 2km by mechanical transport.

Excavation in foundations, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. stacking the excavated soil not more than 3 mtrs. Clear from the edge of the excavation and then returning the stacked soil in 15cm layers when required into plinths, sides of foundations etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled and neatly dressed.

Providing and laying cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.

Random rubble/polygonal rubble (uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement: 6sand: 12graded stone aggregate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement: 6sand).

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30 x 30 x5mm so as to give a fair finish i/c centering, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling in all heights and removal of the same for in-situ reinforced concrete and plain concrete work in:- (a)Foundation footing, basis of columns etc. and mass concrete.

(b)Columns, pillars, posts and struts square, rectangular or polygonal in plan. Pedestal

(c)Beams, cantilevrs, girders and lintels sides and soffits of beams, beam haunchings, cantilever, girder bressumers and lintels not exceeding 1 mtr. In depth.

(d)Flat sufraces such as soffits of suspended floors, roofs, landings and the like floor etc. upto 200mm in thickness.

(e)Stair cases with slopping or stepped soffits excluding

Providing & laying cement concrete 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:- a)Foundation, footing bases of columns and the like and mass concrete.

(b)Columns, pillars, posts and struts square, rectangular or polygonal in plan. Pedestal

(c)Suspended floors, roofs, landings & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

(d)Stair cases (except spiral stair cases) excluding landing but i/c preparing of the surface and finishing of nosing upto all heights/level.

Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels.

Brick work using common burnt clay building bricks in super structure above plinth level upto all heights within 1cement: 6sand) Ist. Class bricks.

Half brick honey comb brick work with common brunt clay building bricks in cement mortar 1:4 (1cement:4 Sand)

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position. (Sal wood)

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clearstorey windows including black enamelled iron butt hinges with necessary screws 40mm thick 2st. class deodar wood.

Providing and fixing wire guage shuter using galvanised M.S. wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 30 mm thick second class deodar wood

Providing and fixing bright finshed brass sliding door bolts with nuts and secrews etc complete. (a)300 x 16mm

Providing and fixing Aluminium tower bolts with nuts and secrews etc complete. (a) 200 x 10mm.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete. (i) 100 mm size.

(ii) 125mm size

Providing and fixing bright finished hard drawn hooks and eyes. 100mm.

Providing and fixing 40x3 mm MS hold fast i/c fixing to frame with 10 mm dia bolts nuts & wooden splug & immerging in cement concrete block 10x10x15 cms 1:3:6.

P/F Hydroulic spring complete in all respect

P/F Brass door stopper

P/F Glass pans 4mm Thick Complete in all respect

Supplying & fixing rolling shutters of approved make made of 80mmx 1.25mm M.S laths interloked together their entire length and joined together at the end by end locks mounted on specially design pipe shaft, with brackets side guides and arrangment s for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring.

Providing & fixing 27.5 centimeter long wire spring grade no.2 for rolling shutters.

Providing & fixing ball bearing for rolling shutters.

Providing & fixing top cover for rolling shutters.

6mm cement plaster to ceiling with cement mortar 1:4 (1cement: 4sand). Ceiling

15mm cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement: 6sand).

15mm cement plaster in single coat on fair side of brick/stone/concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement: 6sand).

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat with reguler modified polyster (RNP) organic coated of 20 microns over 5 micron primer coating to back coat of polyster of 5 microns over 5 micron primer coating i/c fixing with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer incharge.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat with reguler modified polyster (RNP) organic coated of 20 microns over 5 micron primer coating to back coat of polyster of 5 microns over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, Bolts, and Nuts 6mm dia & prepainted G.I limpet and bitumen washers complete with all accessories as required as per the direction of Engineer incharge.

Providing and fixing M.S. B.P sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling i/c cutting fixing & welding to steel roof members & appling a coat of red lead primer complete as per the instruction of Engineer incharge.( base mambers of steel work shall be measured & paid sepertely.

Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:- (a) In trusses and trussed purlins in building.

(a) In gratings framed guard bars, ladders, railing, brackets and similar works.

P/F 12mm tthick plaster paris ( Gypsum unhydrous) ceiling tiles up to 5mtr above floor level over wooden frame

Providing & Fixing 75mmx60mm rounded hand rails in straight length complete in 1st class deodar wood

Providing and fixing M.S. grills of required pattern in wooden frames of windows flat square or round bars with round headed bolts and nuts or by screws, plain grills.

Applying priming coat over new wood & wood based surfaces after & i/c preparing the surface by thoroughly cleaning oil grease dirt & other foreign matter, sand paper & knotting

Painting two coats (excluding priming coat) over new wood & wood based surfaces after & i/c preparing the surface by thoroughly cleaning oil grease dirt & other foreign matter, sand paper & knotting

Applying priming coat over new steel & other metal surfaces after & i/c preparing the surface by thoroughly cleaning oil grease dirt & other foreign matter & scoured with wire brushes fine steel wool scrapers & sand paper complete.

Painting two coats (excluding priming coat on new steel) on new steel & other metal surfaces

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block gray or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1cement:4sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing & polishing complete (sub base concrete floor to be paid for separately) 80mm thick inter locking blocks.

Applying birla white wall care putty over plaster surface after thorpughly brushing the surface free from mortar drops , dust loose materials and other foreign matters sand paper smooth to give final matter finish to the surface complete.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and i/c a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing wall with weather proof exterior grade emulsion of approved brand and manufacture and of required shade on undeocrated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt remains of loose powdered materials.

Providing & Fixing 1mm thick M.S sheet garrage door with frame & diagonal braces or 40mmx40mmx6mm angle iron 3.15mm M.S gusset plates at junctions and corners 25mm dia pulley, 40mmx40mmx6mm angle & T.iron guide at the top and bottom respectively, including applying a priming coat of red lead paint.

White glazed tiles 6mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement: 3sand) & finished with flush pointing in white cement. White glazed tiles in treads of steps not exceeding 30cm in width.

Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Kota stone slab flooring 20mm (average) thick base of cement mortar 1:4 (1cement: 4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab inlcuding rubbing and polishing complete 25mm thick.

P/F on wall face PVC ( D-plast) rain water pipes for working pressure not less than 4.5 kg/ sqm i/c filling the joints with approved adhesive complete- (i)150mm dia pipe

(ii)Plain bend 150mm

Providing & Fixing PVC clamp ISI marked of approved design with steel screw complete (i)150mm dia

Cement Concrete pavement 25mm to 50mm thickwith1:2:4 with 20mm nominal size including with finishing floating coat of neat cement complete.

Providing wood work in frames of false celling partitions etc. sawn and put-up in position. Sal wood

Providing & fixing plain lining with tongued and groved jointing and screws (frame work and cover fillets to be measured and paid for seprately with 1st class deodar wood 20mm thick

Polishing two coats with french polish on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.

Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand :4graded stone nominal size) foundation concrete 1:4:8 (1 Cement: 4 sand :8 graded stone aggregate 40mm nominal size) inside plastering 15mm in cement morter 1:3 (1cement : 3sand) finished with a floating coat in cement concrete 1:2:4) (1cement: 2sand :4graded 20mm stone nominal size) finished smooth including curing & testing complete. Inside size 800mm x800mm x 500mm deep including C.I. cover with frame and cover to be not less than 38kg. Weight of frame 23kg. and weight of cover (i) 15kg with 200 thick.

P/F white vitreous china extended wall mounting water closet size 780 x 370 x 690 mm of approved shape i/c P/F white vitreous china cistern with dual flushing fitting of flushing capacity 3 ltrs./6 ltrs. (adjustable to 4/8.00 ltrs.)i/c seat cover of cistern fitting with bolt and gasket etc. complete

Providing and fixing PVC P & S trap for water closet (squatting pan) ISI marked i/c jointing the trap with the pan and PVC pipe with approved adhesive etc. Complete 110mm.

Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Single equal branch of required degree with oval access door, insertion rubber washer 3mm thick nut and bolt complete. 100 mm dia.

P/F PVC plain double equal branch ISI marked i/c fixing with approved adhesive etc complete 110mm

C/O toe walls for protection of slopes as per drawing and technical specification clause-1302.5 Nominal mix 1:3:6 (1 cement :3 sand :6 aggeregate 20 mm nominal size) Walls

P/F zet for W.C complete in all respect

Providing & fixng CP Brass waste pipe for wash basin or sink 32mm dia.

Providing and fixing PVC connection.

Providing and fixing weep hole 100 mm complete in all respect

PVC Pipe (i)75mm

PVC Accesseries: Plain Bend (a)110mm

P/F PVC collors ISI markes i/c fixing with approved adhesive etc. complete 110mm

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality.

P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws.

Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm.

Providing & fixing CP brass bib tap with capastan head 15mm dia.

Providing & fixing C.P. pillar tap with capaston head. 15mm dia.

Providing & fixing CP stop cocks 15mm dia.

Providing and fixing plastic seat(solid cover) and cover for wash down water closet with C.P. Brass hinges and rubber buffer in white plastic seat cover

Providing and fixing to wall ceiling and floor G.I. pipe (Heavy Grade) (i) 15mm dia. With fittings and clamps i/c making good the wall, ceiling and floor

Providing and fixing G.I. or M.I. unions. i) 15mm dia.

ii) 20mm dia

Providing and fixing brass full way valve with wheel 15mm nominal size.

ii) 20mm dia

P/F m.s. holder bat clamps of approved design to CI AND SCI pipes 100mm dia

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

P/F 600x120mm glass self with Cp brass bracket & guard rail comlete to fix wooden plugs with Cp brass Screw

Providing and fixing PVC water storage tank G.I. Inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level: 1000 ltrs. net Capacity tank.

Satish Kumar

PRAHLAD SING NEGI