Construction of Protection Wall and Compound Wall in Godown Campus at Garudeshwer Ta:-Garudeshwer, Dist Narmada

Name of Work: Construction of Protection Wall and Compound Wall in Godown Campus at Garudeshwer

Ta:-Garudeshwer, Dist Narmada

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking

of useful materials and disposing the excavated stuff up to 50 mt lead (A) Loose & 1138.00 Cmt 125.86

2 Providing and laying controlled cement concrete M150 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass

3 Provinding and Laying controlled cement concrete M-250 including finising

smooth with curing complete including the cost of form work but excluding the 530.00 Cmt 4461.17

cost of reinforced concrete work in foundation FOOTING and mass cocrete.

4 Provinding and Laying controlled cement concrete M-250 & including finising

smooth with curing complete including the cost of form work but excluding cost of 56.00 Cmt 5883.25

reinforcement concrete for RCC PLINTH BEAM for any cross sectional area of

5 Provinding and Laying controlled cement concrete M-200 and with curing

etc.complete. Including the cost of formwork but excluding the cost of

reinforcement for R.C.C work in Column heving any cross section area of 17.00 Cmt 7834.57

Column.For Ground Floor Column.

6 Brickwork using common burnt clay building bricks having crushing strength not

less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement 144.00 Cmt 4279.98

: 6 -fine sand) (C) Fly ash In Foundation & Plinth

7 Providing and casting in situ ordinary cement concrete M- 150 for coping, over

riding returns including formwork curing and finishing complete. 11.00 Cmt 3705.34

8 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

binding and placing in position complete upto floor two level 48455.00 Kg 77.29

9 Providing 20 mm thick sand faced cement plaster on walls for all height above

ground level consisting of 12mm thick backing coat of cement mortar 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement : 1 sand) 1141.00 Sqm 353.98

including making necessary cornices as directed etc. complete.

10 Wall painting two coats with weather proof acralic emulsion APEX type paint of

approved brand & manufacture and of required shade on exterior wall surface to

give an even shade over and including a primery coat with alkaly resistance 1141.00 Sqm 122.14

primer of approved brand after throughly brushing surface to remove all dirt and

remains of loose powdered materials etc comp. for all height.

11 Providing and fixing concertina coil fencing with punched tape concertina coil

mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt

height of wall with existing angle iron (50mm x50mm x5mm )requird shaped As

per Directed Engeenier in charge. placed 2.4mt or 3.00mt apart and with

horizontal R.B.T. reinforced barbed wire(3 mm) , stud tied with G.I. staples and G.I. 384.00 Rmt 353.50

clips to retain horizontal, including necessary bolts or G.I.barbed wire tied to angle

iron, all complete as per direction of Engineer-in-charge, with reinforced barbed

tape (R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at

compound wall for ESR M4/ intakewell.

12 Dismentaling the existing structure including removing and stacking the

dismentelled materials as and where directed. (B) Rubble Masonry 144.00 Cum 418.97

13 Providing and fixing rebar of following diameter using chemical grout of

Hilti make only including cost of all equipment, tools, material, labour, etc.

Standard procedure as mentioned in manufacturer's specifications shall be

strictly followed, which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include cost of drilling of

hole of required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and other 288.00 Nos 353.50

necessary tools and tackles, positioning, providing and grouting chemical,

allied fixtures and fasteners, etc. but excluding the cost of reinforcing

bar etc. complete. Item includes necessary scaffolding, staging,

labour, tools and equipment, etc. complete as directed by the engineer-in

charge. i) 12mm

14 Earth work for embankment including breaking clods,dressing with all lead and lift

and incluiding watering rolling and consolidation of subgrade in layers at OMC to

required dry density including filiing the depression which occur during the 6600.00 Cumt 182.14

process using power 8T to 10T.

15 Earth work in cutting including preparing the slope and camber and stacking or

utilising yhe cutting stuff in bank as directed up to 200mtr from the end of cutting 700.00 Cumt 38.65

with all lead and lift (i) hmurrum

16 Providing and fixing Safety Grills of required pattern for windows/door using

16mm x 16 mm square M.S. polished bars, Required at required spacing as per

design and hold fast with coach bolts including one coat of primer and two coats 924.00 Kg 116.91

of matt finished oil painting etc. complete.

17 Providing and fixing stainless steel mosquito mesh screen of approved quality,

made from SS 304 grade woven wire mesh of approved gauge and aperture size,

fixed over seasoned wooden battens/patti of approved section and quality all

around the periphery. The wooden battens shall be properly planed, treated with

anti-termite/wood preservative treatment and fixed to the existing wall/window

frame with screws, rawl plugs and necessary hardware. The stainless steel mesh

shall be stretched properly and secured with wooden beading, nails, screws or

staples as required. The item includes cutting, fitting, fixing, finishing,

polishing/painting of wooden battens as specified, making good the disturbed

portions and all materials, labour, tools, tackles and incidental charges complete in

all respects as directed by the Engineer-in-Charge.

In Word : One Crore One Lakh Forty Two Thousand Fifty One Rupees and Sixty Eight Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate mentioned

above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved From the

Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Const.(R&B) Sub Division Rajpipla (R&B) Division

Rajpipla Rajpipla