CERTAIN REPAIRS TO OTM/MD ACCN IN ZONE A INCLUDING HQ BLDG UNDER AGE B/R-II AT GE CLEMENT TOWN, DEHRADUN

Amount

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded stone agg) mixed withliquid water proofing compound (as per manufacture direction and paid separately) over and incl one coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair (without using extra cement) as in roof padding incl removal of existing padding, cleaning, washing & rubbing the surface complete all as specified and directed. Note : The work is required to be executed at single, double & triple storey buildings (accesible & non accesible). Rate for the same is included.

M & L of water proofing treatment to roof slab with APP based modified polymeric membrane as per manufacturer’s instructions with following course of description below :- (a) Removal of existing roof treatment i.e APP membrane including plaster, PCC padding, brick tiling incl mud mortar and open up RCC roof slab including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance, scales, oil or any other loose material (b) One coat of cement slurry admixed with acrylic bonding compound SBR Latex liquid polymer as to be used for bonding of new concrete / mortar to old surface as per manufacturer direction and finishing the surface even and fair (without using extra cement) as in roof padding to receive roof treatment (c) Applying a priming coat of bituminious primer @ 0.30 Kg /Sqm, till the surface is properly impregnated. (d) Providing APP based 5 layer polymeric membrane minimum weighing 3.6Kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core, laid on primed surface by forced applications as per the manufacturer's instructions with side over lap of 75 mm and end overlap of 100 mm. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer (torching overlap by propane or butane gas torch ) and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (e) Apply two coat of bituminous aluminium paint @ 0.20 Kg / Sqm each coat over APP membrane. Note : The work is required to be executed at single, double & triple storey buildings (accesible & non accesible). Rate for the same is included.

M&L PCC 1:5:10 type E-2 (using 40 mm graded brick aggregate) as in filling, mass concrete, sunken floor etc including Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed

M&L for 15mm thick rendering in cement mortar (1:3) as in sunken floors mixed with liquid water proofing compound (as per manufacturer's instructions) finishing the surface even and smooth with and including applying two coats of SBR Latex/ Dr Fixit or equivalent on plastered or unplastered surface complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ 150) as in roof covering/cladding to wall, fixed with self tapping screws including Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

M&L for brick work except bricks sub class B old size bricks straight or curved plan exc 6m mean radius built in cm 1:6 including Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 15mm thick plaster in CM 1:6 on fair face of brick walls finished even and smooth without using extra cement complete all as specified

M&L for 15mm thick cement plaster in CM 1:4 on fair face of brick walls or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed

M&L for applying one coat of internal acrylic distemper of approved tint on walls on existing treatment and preparation of old plastered surface complete all as specified and directed

M&L for applying two coats of cement base paint after preparation of newly plastered/concrete surfaces over alkali resistant primer on wall including preparation of surfaces all as specified

M&L for applying one coat of 2mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation of old decorated surface of internal wall by removing existing treatment and applying two coats of acrylic distemper to make the surface smooth all as specified and directed by Engr-in-Charge.

M&L for preparation of old surface of wall including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots making the surface even and smooth and applying one coat of white wash on old decorated surfaces complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old surface of wall , making the surface even and smooth and applying one coat of cement base paint on old decorated surfaces complete all as specified and as directed

M&L for rubber moulded coloured glossy finish cement concrete chequered tiles of size 30cm X 30cm X 20mm thick jointed in neat cement slurry and pointed in white or coloured cement and pigment to match the surface of tile as in floor over and including 15mm thick screed bed in CM 1:6 including dismantling of tiles complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C2 (Using 40mm graded stone aggregate) as in plinth protection/path/hardstanding laid in panels, finish the top surfaces even and smooth complete including filling the joints with mastic compound including demolition of PCC all as specified and directed

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm as in riser of steps, skirting, dado and pillar etc over and including 10mm thick rendering in CM (1:4) including Dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick grade-4 (square/ rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 including Dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for coloured Glazed ceramic tiles in vertical surfaces 350x250x7/450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 and dismantling floor, hearth or wall tiling with cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S&F in repair 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and making good to match with existing surface complete all as specified and directed.

S&F in repair 20 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and making good to match with existing surface complete all as specified and directed.

S&F in repair 15mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F in repair rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 500 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet complete all as specified and directed

All as per Item No 27 above but 1000ltr capacity

S&F in repair stainless steel 1.0mm thick Sink with drainage board, plug washer and waste PVC pipe overall size 914mm x 460mm x 203mm and bowl size 406x354x203mm and including cantilever brackets. complete all as specified and directed.

S&F in repair stainless steel 1mm thick kitchen or laboratory sinks with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified

S&F in repair 20mm bore gun metel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified

S&F in repair vitreous china water closet Orissa pattern of size 580 X440mm white marked including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified

S &F in repair vitreous china Wash down water closet (Pedestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device connection to drain and to flushing pipe/anti syhphonage pipe etc compete all as specified.

S& F in repair sensor with battery for wall mounted urinal complete all as specified and directed.

S&F in repair hollow PVC Wall panelling 5mm thick consisting of Plain colour PVC sheet inclusive of PVC beading and fixing at site as per specifications complete all as specified and directed

Supply & fixing false ceiling at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of perforated 12mm Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 1 0 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, including, Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed

Taking down chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) and making good the disturbed portion to match with the exisitng surface complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm and making good the disturbed portion to match with the exisitng surface complete all as specified and directed

Taking down shutter of any description exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed

S&F windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick “D” Quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48x50mm, centre mullion should be of 48x50mm, section for shutter should be of 52x 25mm and rebate for Glazed shutter with a 20mm provision for Guard bars/Grills. The sections are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 nos. of Stainless Steel heavy duty Pivot hinges shall be provided per shutter the windows fitted with 4mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including fixed panel beading section should be of 12x12mm. Outer frame and mullions to have 10mm Square guard bars with 6” (152.4mm) pitch etc., complete all as specified and directed.

S&F 35mm thick factory made wire mesh solid WPC Pre-laminated both side door shutter consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardware should be fixed with 19*6mm size steel screws etc complete as per manufacturer's specification & drawings complete all as specified and directed

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified.

S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified

M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing

S&F 100mm size mild steel butt hinges medium weight , cold rolled complete all as specified and directed.

S&F 250mm SS sliding door bolts, complete all as specified and directed.

S&F 150mm aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and directed

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane incl Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed

S&F in repair 32/40 mm dia PVC flush pipe of polyethylene of low or high density for WHB, sink, urinal complete all as specified and directed

S&F in repair 100mm PVC pipes single socketed in any length with rubber ring joint laid in trenches of floor or fixed on walls with clamp complete all as specified and directed

S&F in repair 75mm PVC pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed

S&F in repair PVC 75/100 mm floor trap plain with grating including jointing with solvent cement complete all as specified and directed

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action push type with inlet ball valve and float including flush pipe long 32mm dia, ball valve, handle, bracket etc complete all as specified and directed.

S&F as in repair Bib taps cast copper alloy with handle, chromium plated fancy type with wall flange screwed down, suitable for 15 mm bore pipe,complete all as specified and directed.

S&F in repair of 20mm dia MS drapery rod, fancy type,with SS fancy knobs and brackets, fixed in any length complete all as specified and directed

S&F in repair 15mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15mm bore dia of pipe complete all as specified.

S & F as in repairs 15mm dia Stop valves fancy type, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified

S&F in repair vitreous china white wash hand basin flat back of size 550x400mm including brackets including cutting for and pinning in brackets but including waste pipe complete all as specified

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for RCC type B1 1:2:4 (20mm graded aggregate) (Nominal Mix) as in chajjas, water troughs, mangers, shelves, manhole cover slab and similar articles including formwork complete all as specified and directed

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F MS work as in doors or gates, water staging, windows, ventilators of angle/rectangular or square hollow section or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors, windows, ventilators etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, window, ventilator fittings and hanging, also fastening and fixing conforming to Fe 410-W (Gde-E-250) quality 'A' inlcuding dismantling of wrought iron complete all as specified and as directed

M&L for preparing new steel and iron surfaces of any description over 10 cm width /girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed

S&F 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications including dismantling of boarding of any description complete all as specified and directed

S & F D-type cabinet handles premium quality, stainless steel 304 / gloss chrome / SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed

NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed.

ADEPT INFRA SOLUTIONS (BID ID -3332250)

High Tech Metal India (BID ID -3327184)

Jain Engineering Works (BID ID -3323418)

A.S. CONSTRUCTION COMPANY (BID ID -3331511)

SWASTIKA BUILDERS (BID ID -3332068)

RADHA ENTERPRISES (BID ID -3323738)