S.R. to Secretariate building at Chhotaudepur Dist. Chhotaudepur (Repairing of Door - Windows, Toilet block)

Name of Work :- S.R. to Secretariate building at Chhotaudepur Dist. Chhotaudepur

(Repairing of Door - Windows, Toilet block)

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking 179.00 Sq.m. 50.28

of serviceable materials and disposal of unserviceable materials

with all lead and lift.

2 Dismantling sanitary fittings like wash basin, W.C. pan Indian and 16.00 No. 424.10

European type, flushing tank etc. including stacking the materials

with all lead and lift.

3 Providing and fixing to wall, ceiling and floor 10.0 Kg.F/Cm2 67.00 Rmt. 897.79

working pressure polythene pipes of the following outside dia.

low density, complete with special flange compression type fittings,

wall clamps etc. including making good the wall, ceiling and floor.

4 Providing and laying Ceramic tiles 6mm thick of approved quality 28.00 Sq.m. 1017.30

in flooring treads of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3 (1 cement : 3 coarse sand) finishing with flush

pointing in white cement.

5 Providing and laying ceramic tiles 6mm thick of approved standard 151.00 Sq.m. 1070.50

quality in skirting, risers of steps and dedo laid on 10mm thick

cement plaster 1:3 (1-cement : 3 coarse sand) finishing with flush

pointing in white cement.

6 Providing and fixing Vitreous china flat back wash basin 550 mm x 6.00 No. 2194.73

400mm size of approved brand with single hole for pillar tap with

C.I. or M.S. brackets painted white including cutting holes and

making good the same but including fittings : like 32 mm dia. M.I.

fisher union, C.P. brass waste of 32 mm diameter, pillar tap,

capstan head screw down high pressure with screw, shanks and

back nuts of approved make & stop tap of approved make with

connection pipe etc. complete as directed by Engineer in charge.

7 Providing & fixing concealed center point to wall, ceiling and floor 153.00 Rmt. 447.72

I.S.I. mark C.P.V.C. (SDR 13.5) PIPE as approved by Engineer in

charge having National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore, tube fitting and clamps

including making good the wall, ceiling and floor etc. complete. (A)

8 Providing & fixing concealed center point to wall, ceiling and floor 133.00 Rmt. 253.82

I.S.I. mark C.P.V.C. (SDR 13.5) PIPE as approved by Engineer in

charge having National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore, tube fitting and clamps

including making good the wall, ceiling and floor etc. complete. (C)

9 Providing and fixing in position I.S.I. Mark P.V.C. water tank make 4000.00 Litre 3.95

of approved quality having inside white coating inside including inlet,

outlet flushing and over flow arrangement, ball cock etc. complete

as directed by Engineer in-charge.

It. Description of Item Qty. Unit Rate in Amount

10 Providing and fixing sheet glass, selected quality (Type-C) 20.00 Sq.m. 1195.64

bedded in putty and fixed with wooden beading including the cost of

wooden beadings of first class teakwood and necessary cutting of

glass. (i) 5 mm thick.

11 Providing and fixing water closet squatting pan (Indian type W.C. 4.00 No. 1373.18

Pan of approved quality) size 580 mm (Earthwork, bed concrete,

foot rest and trap to be measured and paid for separately) (A)

Vitreous china long pattern = white color.

12 Providing and fixing wash down Wall Hung water closet including 4.00 No. 8591.06

jointing the tap with SWR pipe including cistern, soft close seat

cover, internal fitting twin flush, outlet gasket for clair W/H W.C.,

inlet gasket & cantilever C.I. Chair bracket and necessary fittings &

G.I. inlet connection for flush etc. complete as directed by Engineer

13 Providing and fixing Urinal of approved quality including connection 4.00 No. 1674.15

with trap and with integral longitudinal flush pipe. (A) Squatting plate

pattern white earthenware 550 x 300mm.

14 Removing and re-fixing door or window for repairing work including 184.00 Sq.m. 483.79

making the wall good with C.M. 1:3 work etc. complete.

15 Distempering (two coats) with oil bound washable distemper of 2043.00 Sq.m. 77.30

approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a primer coat

with alkali resistance primer of approved brand after thoroughly

brushing the surface free from mortar dropping and other foreign

matter and also including preparing the surface even and sand

papered smooth.

16 Painting two coats (excluding priming coat) on previously painted 962.00 Sq.m. 59.35

wood and wood based surface with enamel paint, to give an even

shade including cleaning the of all dirt, dust and other foreign

17 Painting wall with APEX paint exterior emulsion paint on wall 1951.00 Sq.m. 72.72

surface with two coats to give an even shade after thoroughly

brushing the surface to remove all dirt, dust and other foreign matter

18 Dismentaling doors, windows, ventilators etc. (wood or steel) 10.00 No. 263.35

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and lift.

(i) Not exceeding 3.00 Sq.m. in area.

19 Providing and fixing chromium plated flush cock of approved 10.00 No. 263.77

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as

directed by Engineer in charge.

20 Providing and fixing screw down bib taps of following size (B) brass 25.00 No. 186.83

chromium plated screw down bib tap (i) 15mm dia. as directed by

Engineer in charge.

21 Providing and fixing Gun metal check or non-return fullway wheel 4.00 No. 1010.00

valve. (E) 40mm dia. etc. complete as directed.

22 Providing and fixing Gun metal check or non-return fullway wheel 4.00 No. 420.63

valve. (C) 25mm dia. etc. complete as directed.

It. Description of Item Qty. Unit Rate in Amount

23 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 10.00 No. 600.23

100mm diameter with jali of the following nominal diameter of self

cleaning design with C.I. screwed down or hinged grating including

the cost of cutting and making good the walls.

24 Providing and fixing S.W. Gully trap with C.I. grating brick masonry 6.00 No. 1246.92

chamber and water tight C.I. cover with frame of 300 x 300 mm size

(inside) with standard weight (i) square mouth traps (B) 150 mm x

100 mm size P or R type.

25 Constructing brick masonary chamber for under ground C.I. 8.00 No. 2932.93

Inspection chamber and bends with bricks having crushing strength

not less than 35 Kg/cm2 in C.M. 1:5 C.I. cover with frame (light duty)

455mm x 610mm internal dimensions, total weight of cover with

frame to be not less than 38 Kgs. weight of cover 23 Kg. and wt. of

frame 15 Kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm. size) foundation concrete

1:5:10 inside plaster 15 mm. thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & a bed

concrete etc. complete. (i) inside dimension 455mm x 610 mm and

450mm deep for single pipe line.

26 Providing and fixing FRP frame size 100 x 50 mm and 28 mm thick 18.00 Sq.m. 2377.76

FRP depress panel shutter for toilet purpose including providing and

fixing 25mm thick shutters for cupboards etc. including anodize

alluminium butt hinges with necessary screws for (iii) partly panelled

and partly glazed including the core of the shutter & frame is to be

filed up with injected fire extinguishing grade polyurethene foam

done in situ alongwith embedded wooden pieces for stiffening &

also taking hinges & fixtures. The whole FRP frame & shutter is to

be water proof weather proof, termite proof & resistance to mild acid

/ alkali. Rates are to be inclusive of S.S. hinges with necessary

screws & alluminium fixtures & fastenings. Product should have

years performance guarantee and company have ISO 9001-2000

i.e. Rs. Ten lacs Nine thousand Eighty Five and Sixty paisa only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

It. Description of Item Qty. Unit Rate in Amount

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been deducted

from the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 3500.00 must be recovered from 1st R.A. bill of

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Chhotaudepur (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Chhotaudepur Chhotaudepur Chhotaudepur