Development of Tourist Facilities Kuda Beach at Bhavnagar

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Clearing and grubbing road land including

uprooting rank vegetation grass bushes, shrubs,

Rupees Eight And

sapling and trees girth upto 300 mm removal of

1 12592.00 smt 8.63 Paise Sixty Three

stumps of trees cut earlier and disposal of

unserviceable materials(A)By manual means in

area of light jungle

Box cutting the road surface to proper slope and

camber for making a base for road work Rupees One Hundred

2 1500.00 including removing the excavated stuff and Cmt 112.02 Twelve And Paise

depositing on the road side slope as directed Two Only

upto 50Mt.lead.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful Rupees One Hundred

3 4202.00 materials and disposing off the excavated stuff Cmt 160.89 Sixty And Paise

upto 50 Meter lead including necessary shorting Eighty Nine Only

& stacking. (B) Dense or Hard Soil

Excavation for foundation for depth from 1.5 m

to 3.0 m depth including sorting out and stacking

Rupees One Hundred

of useful materials and disposing off the

4 63.00 Cmt 174.56 Seventy Four And

excavated stuff upto 50 Meter lead including

Paise Fifty Six Only

necessary shorting & stacking.(B) Dense or Hard

Excavation for foundation for depth from 3.0 m

to 5.0 m depth including sorting out and stacking Rupees One Hundred

of useful materials and disposing off the Eighty Seven And

excavated stuff upto 50 Meter lead including Paise Twenty Nine

necessary shorting & stacking.(B) Dense or Hard Only

Filling available excavated earth (excluding hard

Rupees One Hundred

rock) in trenches. plinth, sides of foundations etc.

Thirty Seven And

6 5547.00 in layers not exceeding 20cm. in depth Cmt 137.47

Paise Forty Seven

consolidating each disposited layer by ramming

Filling in foundation and plinth with murrum or

selected soil in layers of 20cm. thickness

7 1901.00 Cmt 304.60 Hundred Four And

including watering, ramming and consolidating

Paise Sixty Only

Filling in plinth with sand under floors including

Hundred Eighty Nine

8 60.00 watering ramming, consolidating and dressing Cmt 489.28

And Paise Twenty

Provdg. & laying cement concrete 1:2:4 Rupees Three

(1cement:2 corse sand:4 hand broken stone Thousand Eight

9 592.00 aggregate 20 mm nominal size) and curing Cmt 3,824.10 Hundred Twenty

complete including cost of form work in (A) Four And Paise Ten

Foundation and plinth Only

Providing, laying controlled cement concrete M Rupees Four

250 and curing complete including the cost of Thousand Eight

10 99.00 form work but excluding reinforcement for Cmt 4,829.82 Hundred Twenty

reinforced concrete work in: Up to Plinth Level. Nine And Paise

(A) Footing Eighty Two Only

Providing, laying controlled cement concrete M

250 and curing complete including the cost of

form work (rates for centering, shuttering,

11 23.00 Cmt 7,153.83 Hundred Fifty Three

formwork staging scaffolding for considering up

And Paise Eighty

to 4.50m height) but excluding reinforcement for

reinforced concrete work in: (C) Plinth Beam

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing, laying controlled cement concrete M

250 and curing complete including the cost of

form work (rates for centering, shuttering,

Thousand Thirty

12 8.00 formwork staging scaffolding for considering up Cmt 8,033.54

Three And Paise Fifty

to 4.50m height) but excluding reinforcement for

reinforced concrete work in: (B) Column upto

Providing, laying controlled cement concrete M

250 and curing complete including the cost of

form work (rates for centering, shuttering,

Thousand Thirty

13 13.00 formwork staging scaffolding for considering up Cmt 8,033.54

Three And Paise Fifty

to 4.50m height) but excluding reinforcement for

reinforced concrete work in: (B) Column Ground

Providing, laying controlled cement concrete M

250 and curing complete including the cost of

form work (rates for centering, shuttering,

Thousand Seventy

14 4.00 formwork staging scaffolding for considering up Cmt 8,075.96

Five And Paise Ninety

to 4.50m height) but excluding reinforcement for

reinforced concrete work in: (B) Column First

Providing, laying controlled cement concrete M

200 and curing complete including the cost of

Rupees Six Thousand

form work (rates for centering, shuttering,

Five Hundred Thirty

15 19.00 formwork staging scaffolding for considering up Cmt 6,538.74

Eight And Paise

to 4.50m height) but excluding reinforcement for

Seventy Four Only

reinforced concrete work in: (E) Floor Beam (i)

Providing and laying controlled cement concrete

Rupees Six Thousand

M-250 and curing complete including the cost of

16 73.00 form work but excluding reinforcement for Cmt 6,470.06

Seventy And Paise Six

reinforced concrete work in: (D) Lintel/ coping

(i) Ground Floor

Providing, laying controlled cement concrete M

200 and curing complete including the cost of

form work (rates for centering, shuttering,

17 50.00 Cmt 4,804.57 Hundred Four And

formwork staging scaffolding for considering up

Paise Fifty Seven

to 4.50m height) but excluding reinforcement for

reinforced concrete work in: (E) Grade Slab

Providing, laying controlled cement concrete M

250 and curing complete including the cost of Rupees Six Thousand

form work (rates for centering, shuttering, Seven Hundred

18 27.00 formwork staging scaffolding for considering up Cmt 6,793.26 Ninety Three And

to 4.50m height) but excluding reinforcement for Paise Twenty Six

reinforced concrete work in: (E) ground Floor Only

Providing, laying controlled cement concrete M

250 and curing complete including the cost of Rupees Six Thousand

form work (rates for centering, shuttering, One Hundred Seventy

formwork staging scaffolding for considering up Six And Paise Fifteen

to 4.50m height) but excluding reinforcement for Only

reinforced concrete work in: (E) GF Chajja

Providing, laying controlled cement concrete M

250 and curing complete including the cost of Rupees Eight

form work (rates for centering, shuttering, Thousand Fifty And

formwork staging scaffolding for considering up Paise Seventy One

to 4.50m height) but excluding reinforcement for Only

reinforced concrete work in: (E) RCC WALL

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and casting in situ controlled cement Thousand Eight

21 152.00 concrete M-200 for Kerb/ kerb blocks including Cmt 4,886.92 Hundred Eighty Six

form work curing and finishing, complete And Paise Ninety

Providing Corrosion Ressitance Steel TMT Bars

Rupees Eighty One

FE 500D reinforcement for R.C.C. work including

22 50990.00 Kg. 81.45 And Paise Forty Five

bending, binding and placing in position

Applying general insecticide pest control

treatment to floors, cupboards etc including

labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part- Rupees Forty And

II((0.075% concentration by mass) is Paise Two Only

recommended 10.5ml chemical diluted with

liters of water application 0.5 litre chemical/

Sqm of surface is recommended as per I.S.

Masonary work using Aerated light weight

concrete block having crushing strength not less

than35kg/ sqcm for super structure above plinth

24 249.00 Cmt 4,600.00 Thousand Six

level upto floor two level incement mortar1:5(1

cement:5fine sand)complete as per Btechnical

Specification Up to Plinth

Masonary work using Aerated light weight

concrete block having crushing strength not less

than35kg/ sqcm for super structure above plinth

25 81.00 Cmt 4,600.00 Thousand Six

level upto floor two level incement mortar1:5(1

cement:5fine sand)complete as per Btechnical

Specification Up to Ground Floor

Coursed rubble masonry with stone of approved

quality in foundations and plinth in Cement

26 581.00 Cmt 3,843.32 Hundred Forty Three

Mortar1:3 (1-Cement: 3-coarse sand) etc.

And Paise Thirty Two

Pointing on coursed stone masonry with cement Rupees Ninety Seven

27 1733.00 mortar 1:3 (1-cement: 3-coarse sand) (B) Ruled Smt 97.48 And Paise Forty Eight

10mm th cement plaster in single coat on fair

side of brick/ concrete wall for interior

Rupees One Hundred

plastering upto floor two level finished even and

28 33.00 Smt 184.18 Eighty Four And

smooth in C M 1:4 (1 cement 4 coarse sand)

Paise Eighteen Only

including floating coat of neat cement including

finishing etc complete. (i) Ground Floor

Providing & laying 15 mm. thick mala cement

plaster in single coat on fair side of brick Rupees Two Hundred

concrete walls for interior plastering and Twenty Seven And

finished even & smooth plaster with floating coat Paise Ninety Seven

of neat cement slurry. (ii) Cement mortar 1:4 (1 Only

cement: 4 sand) (i) Ground Floor

Providing 20 mm thick double coat mala cement

plaster on interior brick/ concrete work for

plastering comprising of base coat of 12 mm

Rupees Two Hundred

thick cement plaster in cement mortar (1

30 1672.00 Smt 290.71 Ninety And Paise

Cement: 4 coarse sand) in rough finishing and

Seventy One Only

mm thick top coat of cement mortar 1:2 (1

Cement: 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing 20mm thick water proof cement

plaster using water proofing powder 1Kg/ 1bag

of cement for all floors on brick/ concrete wall Rupees Two Hundred

31 86.00 work using water proofing materials in CM 1:4 (1 Smt 286.84 Eighty Six And Paise

cement 4 coasrse sand) including finishing with a Eighty Four Only

flooting coat of neat cement slurry etc complete

for all floor. as directed.

Providing and applying two coats of Birla or

Asian acrylic lapy (putty) & two coats of primer

of approved brand and manufacture on new wall

Rupees Forty And

32 119.00 surface to give an even shade including Smt 40.59

Paise Fifty Nine Only

thoroughly brushing the surface free from

mortar dropping and other foreign matter and

sand papered smooth.

Wall painting (three coats) with plastic emulsion

paint of approved brand and manufacture on Rupees One Hundred

undecorated wall surface to give an even shade Twenty Eight And

including throughly brushing the surface free Paise Thirty Eight

from mortar droppings and other foreign matter Only

and sand papered smooth.

Providing and applying 2mm thick Texture

Plaster Terre Plaette (Specturm, Coral or

equivalent) incoprating fine fillments made of

Rupees Five Hundred

polymer and aggergating natural stone powder

Eighty Four And

34 71.00 with making grooves on base coat of 20 mm Smt 584.79

Paise Seventy Nine

thick smooth mala plaster (which paid

seperately) etc. complete.Colour and shade as

approved by Architect/ Engineer in charge for at

all floor, all height.

Finishing wall with weather proof low velocity

ultima exterior emulsion paint on wall surface

Rupees One Hundred

(two coats) to give an required shape even shade

35 1601.00 Smt 122.14 Twenty Two And

after thoroughly brushing the surface to remove

Paise Fourteen Only

all dirt, and remains of loose powdered

materials.etc complete for all height

Structural Steel work: Designing, Supplying,

fabricating, assembling, hoisting and fixing in

position to alignments & levels as per approved

drawings, structural steel work in-built up for

cantilever portion/ roof top/ pipe racks/

mezzanine/ columns etc. with booms etc., to

detail welded powder coating PVC (welding as

specified by the structural consultant)/ bolted

constructions comprising R.S. joists, channels,

angles, plates or any MS rolled section including

necessary permanent rivets, bolts & nuts,

handling straightening, cutting, making holes,

shop/ site assembly, erection, (including Rupees One Hundred

36 10759.00 preparation of template) transport to site, Kg. 131.83 Thirty One And Paise

storing, etc., and painting of primer coat prior to Eighty Three Only

erection and two or more coats of first quality

Epoxy paint of Asian make or approved

equivalent and quality etc. (Painting Procedure:

Providing and applying Epoxy paint of Asian

make or equivalent and desired shade, including

the preparation surface (with emery paper

and wipe clean) by thoroughly cleaning all dust,

dirt, applying red oxide oil primer (of by brush

or spray) and putty of (Asian paint paste filler)

again sand papering of emery paper and wipe

clean) again applying primer by brush or spray),

again sand papering of levelling rubbing the

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Tensile fabric canopy: Design, fabrication and

installation of Tensile fabric Canopy using steel

structure, white/ Colored Fabric of 600 GSM with

both side PVDF coating (Ferrari, Mahler, Sioen,

Sprech india) make as per approved sample by

Architect with Base plate, Anchor bolts, steel

column, stiffner plate, gi wire rope, nut etc

complete. Work complete: Including cost of all Rupees Six Thousand

type of tools, tackles, scaffolding, all labour, Two Hundred Forty

materials, transportation, Finishing, all type of Eight And Paise

fabrication & steel work (including epoxy paint), Eighty Seven Only

accessories,. Work complete for at all floor, all

level, all depth, all Height, all lead and lift etc.

work complete as per the Detailed specification,

shop drawing, approved sample, instruction of

Architect/ EIC. Sample mock shall be approved

from Architect/ EIC. Roof plan area shall be

measured for payment.

Providing and laying 16-18 mm thick polished

granite stone machine cut in single piece (Max.

available) in sill and jambs of door, window,

ventilation & lift wall cladding, staircase flooring

landing, risers & treads, skirting laid over 10 mm

thick cement mortar 1: 3 (1 cement: 3 coarse

38 65.00 Smt 3,265.33 Hundred Sixty Five

sand) and jointed with grey cement slurry with

And Paise Thirty

matching pigment incl. rubbing and polishing,

half rounding edge and incl. fixing of hilty

fastener at every 1/ 3 span of sill as required size

etc. complete colour and shed as approved by

architect engineer in charge.

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6

(1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material

39 85.00 SMT 1,386.86 Hundred Eighty Six

including dismentaling of existing flooring and

And Paise Eighty Six

jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc.

complete for light shade/ Dark shade

Providing and fixing Sand which type Granite

platform including supplying and fixing granite

stone 18 mm thick mirror polished 1st quality

Granite stones in top and side posiition and Rupees Five

vertical strip at front over 25 mm thick polished Thousand Eight

kotah stone platform fixing in top and sides and Hundred Sixteen And

itermediates supports fixing with cement mortar Paise Fifty Nine Only

and adhesivee and finishing including cutting for

fixing of sink any size (as directed by engineer

incharge) at required position etc complete.

Providing and laying polished River wash Kota

stone slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement: 6-coarse Rupees One

sand) or L.M. 1.1.5 (1-Lime putty:1.5 - coarse Thousand Nineteen

sand) laid over and jointed with grey cement And Paise Thirty Nine

slurry mixed with pigment to match the shade of Only

slab including rubbing and polishing etc.

complete. (A) 25mm thick

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and laying Multicoloured Kota stone

slab flooring over 20mm (Average) thick base of Rupees One

cement mortar 1:6 (1-cement: 6-coarse sand) Thousand Three

42 392.00 laid over and jointed with 3 mm thick epoxy smt 1,384.71 Hundred Eighty Four

grouting as per approved make and sample. And Paise Seventy

work including including rubbing and polishing, One Only

etc. complete. (A) 20-25 mm thick

Providing and fixing flush door both sides

laminated and I.T.W. beading all around by using

shutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded

BWP/ BWR synthetic resin having stamped IS

12823 grade I type II including three coats of

43 4.00 SMT 4,669.23 Hundred Sixty Nine

lacquer polishing to exposed wooden surfaces

And Paise Twenty

and Stainless steel decorative type designs

fixtures/ fastening 2Nos. Handles, 2Nos.

Aldropes, towerbolt etc.including I.T.W.

triangular batten patti of size 30m.m.x30m.m.etc.

as per architectural detailed drawing and as

directed by engineer in charge.

Providing and fixing window having extruded

aluminum Colour anodized section frame main

outer size 95mmx 24mmx 1.17mm @wt. of

0.738Kg/ mt, horizontal Three track member

size 92mmx 31.75mmx1.30 mm @Wt. 1.07Kg/

mt, vertical member of size 92mmx 31.75mmx Rupees One

1.50 mm @ Wt. 1.06Kg/ mt with sliding shutters Thousand Five

44 9.00 of horizontal member size 40mmx 18mmx Smt 1,583.95 Hundred Eighty

1.29mm @wt. of 0.456Kg/ mt, vertical member Three And Paise

of size 40mmx 18mmx 1.29mm @wt. of Ninety Five Only

0.456Kg/ mt/ with 5mm thick transparent

bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame

as per details etc

Providing and fixing M.S. Grills of required

pattern to wooden frames/ Marble/ Granite

Frame of window/ balcony etc. with M.S.Flate as

a frame at required spacing and frames all- Rupees One Hundred

round, square or round bars fixed with round Twenty Two And

headed bolts and nuts or by screws, including oil Paise Twenty One

painting with one coat of primer of approved Only

quality and brand & two coats of synthetic

enamel oil paint etc. complete as per detail

drawing and as directed by Engineer in charge.

Fabricating, supplying and fixing in position SS

railing for staircase and balcony with 50mm

dia.(16 gauge) TOP RAIL, 32X32mm Square

pipe(16 gauge) VERTICAL SUPPORT & 16mm

Dia. (16 gauge) HORI. MEMBER brush finish and

46 20.00 Rmt 3,221.90 Hundred Twenty One

304 grade as per Indian Standrd and detailed

And Paise Ninety

drawing including grinding, cleaning and filling

the welded spots with SS finish (Only Length will

be paid for payment heigth max.1.0 mt.). The

Work to be executed as per consultant drawing.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and laying coloured glazed tiles of the

size 300 mm x 200 mm x 8 mm/ 300 mm x 450 Rupees One

mm x 8 mm OR Tiles Size Approved By Thousand Five

47 83.00 Architect/ GSRTC engineer in skirting, risers of Smt 1,523.67 Hundred Twenty

steps and dedo on 10 mm. thick cement plaster Three And Paise Sixty

1:3 (1 cement: 3 coarse sand) & jointed with Seven Only

white cement slurry.

Providing and laying cement concrete flooring

1:2:4(1-cement: 2-coarse sand: 4 graded stone

aggregate 20 mm nominal size) laid in one layer

and finished with a floating coat of neat cement.

48 32.00 SMT 396.30 Hundred Ninety Six

(B) 50mm thick.providing and mixing

And Paise Thirty Only

waterproofing material in Cement concrete in

mix proportion recommended by the

Providing and fixing S.W. gully trap with C.I. Rupees One

grating brick masonary chamber and water tight Thousand Two

49 2.00 C.I. cover with frame of 300 mm x 300 mm size Each 1,246.92 Hundred Forty Six

(Inside) with standard weight (I) Square mouth And Paise Ninety

traps (B) 150 mm x 100 mm size P of S type Two Only

Supplying, Erecting & fixing PVC milky inside

white Sintex brand Only (not reno or any make)

water tank of cylendrical vertical type of

required capacity moulded in one piece suitable

for drinking water storage made of high dencity

polythelene with bulit in square plateform & top

Rupees Eleven And

50 3000.00 lead with locking ring or threaded type lead. The Ltrs 11.11

Paise Eleven Only

tank shall have checknut system to provide

connections of suitable diameter as directed by

the engg. in charge. for inlet at top & for outlet on

sides with arrangement of overflow & wash out

and also fixing necessary boll valve of standard

size etc. comp. as directed.(MR)

Constructing Manhole with R.C.C. top slab in

1:2:4 mix (1-cement:2-coarse sand: 4-graded

stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement: 3- coarse sand:6-

Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement:

5-coarse sand) finished with a floating coat of

neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement:2-Coarse sand:4- Rupees Eleven

stone aggregate 20mm nominal size) finished Thousand Forty Two

smooth complete including curing and festing (i) And Paise Seventy

Inside size 900mm x 1200mm and 1.5M. deep Four Only

including C.I. cover with frame size 560mm

diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg. (A) With 230mm thick walls

of brick msonry using brick having crushing

strength not less than 35Kg./ Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand)(1) A type

depth 0.90 Metre for 150mm diameter sewer.

Providing & fixing 250 mm dia R.C.C. hume pipe

with collars as per I.S.S. or NP2 type & joints in Rupees Three

c.m. (1:1) laid to proper grade & level incl. Hundred Fifty Nine

necessary excavation and refilling the trenches And Paise Eighty Five

and making the ground as per original etc. comp. Only

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and constructing SOAK WELL of 2.50m

internal dia and 6.00 depth depth internal clear

dimention including the cost of execavation, PCC

1:4:8 foundation for honey combed masonary in

C.M. 1:4 (1cement: 4 sand), casting R.C.C. 1:2:4

(1cement: 2 sand: 4 graded stone aggregate Rupees Forty Three

20mm nominal size) top slab 12 thick with C.I. Thousand Four

53 1.00 manhole cover 600mm x 450mm size of 35 kg. Each 43,405.76 Hundred Five And

weight and 75mm dia C.I. pipe 1800mm long Paise Seventy Six

with 75mm dia cowel vent and filling the wall Only

1000mm in depth with dry brick bats including

providing vata in C.M. 1:3 (1cement: 3 sand),

curing including cost of reinforcement etc.

complete as per detailed drawing and directed

Construction Septic tank inside dimention of

4.00 m in length & 2.50 m in width & 2.00 m

depth including excavating any type of soil as

shown and mentioned in the drawing, providing

and laying 0.10 m thick plain cement concrete

1:3:6 (1 cement: 3 coarse sand: 6 graded stone

agg.) 40 mm thick IPS flooring at bottom with

brick masonary 0.23 m thick walls CM 1:5 (1

cement: 5 coarse sand) and intermediate

partition CM 1:4 & RCC Top slabs12 cms thick in

54 1.00 Each 70,217.22 Hundred Seventeen

1:2:4 (1 cement: 2 coarse sand: 4 graded stone

And Paise Twenty

agg) including reinforcement as per design and

15 mm thick cement plaster in CM 1:4 with

floating coat of neat cement slurry inside, top

and around tank below 15 cm on ground level,

Also provide Two nos CI Manhole frame and

cover of size 60 cm x 45 cm & 75 mm dia. PVC

kgf/ Sq cm pressure air vent pipe in 3.00 length

with cowl etc complete as per direction of

Engineer in charge.

Providing and fixing cast iron steps of size 500 Rupees One Hundred

55 6.00 mmx150 mm x 22.5 mm and painting with two Each 155.11 Fifty Five And Paise

coats of Anti-corrosive paint etc. complete. Eleven Only

Providing and fixing C.I.Manhole cover Rupees Nine Hundred

56 1.00 0.60M.x0.45M. size having weight not less than Each 958.17 Fifty Eight And Paise

35Kg. Seventeen Only

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Cobble stone 80 mm thick (150 x 150 mm/ 200 x

150 mm): Providing and laying of 80 mm thick

(+10 mm) cobble stone in multi colour (Sand

stone) as per approved sample by Architect/

Client. Fixing with 25 mm thick cement mortar

(1: 4) of thickness on PCC surface as per detailed

drawing. The joints of the stone shall be properly

and firmly filled using properly mixed mortar

and joints shall be cleaned and well pointed

using cement mortar. Work Including levelling in Rupees One

proper line and level with using surface vibrator Thousand Five

etc complete. including cost of all type of tools, Hundred Twenty Five

tackles, all labour, all type of materials, And Paise Ten Only

transportation, cleaning of surfaces, if required

protecting, for at all level, all depth, all Height, all

lead and lift etc. work complete as per the

detailed drawing, approved sample,

specifications and instruction of Architect/ EIC.

Sample mock shall be approved from Architect/

Client. Material Test certificate shall be

submitted by the contractor. (Excluding PCC and

Designing, Providing & fixing glass work at

entrance having glass panels including openable,

central and fixed side panels. Assembly shall be

made of 12 mm clear heat strengthened glass of

approved colour, frameless door shutter with

approved floor springs & patch fittings, to

support/ hold glass to withstand wind pressure Rupees Five

of 150 kg/ Sqm, stainless steel handles 430mm x Thousand One

30mm (S.S.S min), patch locks, joints should be Hundred Fifty Three

filled with transparant approved silicon sealant And Paise Two Only

to ensure stability & water tightness of door

including fine stoppage including approved

heavy duty bottom rail/ door section of anodized

Aluminum sections etc.as per specification,

approved approved drawings and etc completed

as directed by E.T.C/ PMC.

Providing and fixing pre-cast concrete kerb stone

of gray cement based concrete block 30cm

length, 30cm height and 15cm thick of M250

Hundred Seventy

59 705.00 grade concret as per approved design and Rmt 374.92

including excavation for fixing in proper line and

Ninety Two Only

level, filling the joint with C:M 1:3 (1cement:

3fine sand) etc complete.

Applying priming coat over kerb stone surface

after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other Rupees One Hundred

60 743.00 foreign matter and scoured with brushes fine Smt 132.02 Thirty Two And Paise

steel wood.scrapers and send paper with ready Two Only

mixed priming paint brushing red lead and

Painting two coats enamel paint

Providing and fixing dustbins of 5mm thick fibre

sheet & 5' ht. with M.s fabrication structure

Column, staircase, support members, platform

supports & members with Duco paint including

61 20.00 Nos. 15,749.94 Hundred Forty Nine

cost of all labour and material, cleaning, etc.

And Paise Ninety

approved design and detail given by engineer

incharge etc. complete. (as per architectural

detail drawing)

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Tree Guard: 800 x 800 x 75 mm Providing and

fixing of Concrete tree guard in shot blasted

Rupees Two Hundred

finished and sample approved by Architect/

62 500.00 Nos. 209.07 Nine And Paise Seven

Client. work including all type of material,

fittings, accessories, etc. Test certificate shall be

submitted by the Manufacturers.

Designing, Supply and Installation of various

Signages, shown in pictures should be erected in

sheet with MS sctructure, 1.50 x 0.90 of size in

4mm sheet thick, made with S.S. 304 or MS and

Rupees Twenty Two

Aluminium Composite panel with digital printing

63 9.00 on various medium as per approved by EIC or smt 22,220.00

architect. A single Signages may consist of all said

materials. Rate is inclusive of all other charges

like required civil work, transportation, labour,

colour, wastage etc. Measurement shall be valid

only for the Signages element including the

supports/ installation elements.

Providing and fixing G.I. welded wire mesh

fencing of approved make, mesh size, and wire

thickness (generally 3 mm to 5 mm dia wire with

50×50 mm/ 75×75 mm grid or as approved),

fabricated from galvanized steel wires, and

finished with factory-applied polyester powder Rupees Two

coating in green colour of minimum 60–80 Thousand Two

microns thickness. The fencing system shall be Hundred Twenty Two

supported on M.S./ G.I. vertical posts of approved Only

section (minimum 40×40 mm/ 50×50 mm

square hollow section or equivalent), spaced at

2.5 m to 3.0 m c/ c or as per approved drawing.

Posts shall be properly aligned in plumb and

Proving & supplying Goradu Field soil with all Rupees Six Hundred

lead and lift and Spreading, watering, dressing Eighty Eight And

rolling with hand roller and mixing of soil & silt Paise Sixty Three

as per approved By engineer In charges. Only

Supplying of well rotted FYM manure with all Rupees One

lead and lift including spreading mixing dressing Thousand Two

and rolling with hand roller etc. complete as per Hundred Thirty Eight

approved By engineer In charges And Paise Seven Only

Scarifying the surfaceof soil including spreading

Rupees Twenty Six

of DAP fertilizer mixing with soil properly

67 6000.00 smt 26.52 And Paise Fifty Two

leveling ground dressing of the plot as per

approved By engineer In charges

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Supplying well grown shrub plants of average

height 3' to 4' and planting in 300x300x300mm

size pits by mixing of FYM & existing soil in

ration 1:3 with soil, pesticide & insecticides.

Plant should be disease free and fungus free

8"x10" polythene bag. Plastic bag or pots should

be removed carefully and soil around the roots

68 408.00 Smt 1,133.07 Hundred Thirty

should not be dropped or disturbed much. Bill

Three And Paise

shall be placed after 45 days of plantation of

shrubs. Mortality rates to be inclusive. Work shall

be done as shown in the drawing or as directed

and approved by EIC/ Architect. The ground

coverage should be dence and uniform throuout

the planting area.

Supply and planting box hedge shrub of average

height 1' to 2' by providing and fixing FYM @

rate of 0.06 cmt/ pit with soil pesticide &

insecticides. Plants shoud be disease free and

fungus free in 6"x8" polythene bag. Plastic bags

or pot should be removed carefully and soil

around the roots should not be dropped or

69 408.00 Nos 1,133.07 Hundred Thirty

disturbed much. Bill shall be placed after

Three And Paise

completion of maintenance period but not before

stabilizing the shrubs. Mortality rates to be

inclusive. Work shall be done as shown in the

drawing or as directed and approved by EIC. The

ground coverage should be dense and uniform

throughout the planting area.

Supply and planting of tree of specified variety

including excavation of pit 600x 600x600mm

depth mixing of FYM & existing soil in ratio 1:3

termite treatment and planting of plants (height

8' to 10' above bags/ pots). Soil mounts 4'-8" in

size. Tree plantation should be carried on neatly

accurately and with perfection as per drawing

and instruction given by EIC. Plastic bags or pots Rupees Seven

should be removed carefully and soil around the Hundred Fifty Nine

roots should not be dropped or disturbed much. And Paise Eighty

Bill shall be placed after completion of Nine Only

maintenance period but not before stabilizing

the hedges. Rates for mortality to be inclusive.

Providing and fixing tripod made of wooden ball,

height 1.5m. Top bracket to be 300x300mm leg

embedded in ground up to 300mm and to have

tar coat. Work shall be done as shown in the

drawing or as directed and approved by EIC.

Proving & fixing Carpet lawn after proper anti Rupees Four

termite treatment and rolling the same by hand Hundred Sixty One

roller and watering etc completeas per approved And Paise Seventy

By engineer In charges Nine Only

Providing and fixing Ficus topiary plants of

height 1.5 m to 1.8 m, in approved shape, Rupees Eighteen

including excavation of pits, soil preparation Thousand Five

with manure, planting, staking, watering, and Hundred Eighty Four

initial maintenance, complete as per direction of Only

Engineer-in-Charge.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing, supplying, transporting, and planting

Date Palm trees (Phoenix dactylifera/ Phoenix

sylvestris or approved equivalent) of height 3.00 Rupees Eleven

73 15.00 m to 3.60 m, healthy, well-grown, and Each 11,615.00 Thousand Six

conforming to approved specifications, complete Hundred Fifteen Only

in all respects as per direction of Engineer-in-

Providing, supplying, transporting, and planting Rupees Seven

Bismarckia Palm (Bismarckia nobilis) of height Thousand Five

74 15.00 2.40 m to 3.00 m, suitable for lawn areas, healthy Each 7,549.75 Hundred Forty Nine

and well-developed, complete in all respects as And Paise Seventy

per direction of Engineer-in-Charge Five Only

Cubical Toilet Supply and instal lmodular toilet

cubicles of MERINOBESCO make 'ZMSSS' series

as per manufaturer's std specifications. All

intermediate panels, pilasters, doors shall be

madeup of Solid Compact Laminate of 12mm

thickness (Phenolic Core Board) as per IS2046

based on thermo setting resins, homogeneously

reinforced with cellulose fibers making cubicles

impervious to Water, resistant to Fire, etc.

Compact laminate should be Greenguard and

IGBC certified Thickness of Compact Laminate:

12mm Color of HPL Boards: Single Standard

Rupees Thirty Six

Compact Color Special Remarks For

75 10.00 Customization: Size of Cubicle: 1000mm (W) X Each 36,966.00

Hundred Sixty Six

1550mm (D) X 1980mm (H)Door Size: 1750mm

(H) X 600mm (W) Divider Size: 1775mm (H)

Overall Height Of Cubicle: 1980mm (Including

bottom Gap of 150mm) Accessories: Standard -

Merino Make Stainless Steel - 304 Grade

accessories) a) SS "U" Channel b) SS "F" Channel

(Only Corner Unit) c) SS Door Stopper Channel

d) SS Top Rail e) SS Coat Hook f) SS Privacy

Thumb turn c/ w Occupancy Indicatorvg) SS

Door Knob h) SS Spring Loaded Butt Hinges with

Cover i) SS Adjustable Foot - 316 Grade j) Rubber

Lining for Door Stopper k) Screws & Wall Plugs

SPECIAL NOTE - Warpage Criteria is 3.0 mm/

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Prov. and laying Trimix design mix cement

concrete M-250 in Flooring, roads/ drive ways

using coarse sand and graded stone aggregates

20 to 25 mm nominal size in appropriate

quantity as per specification, mechanically

vibrated using and surface screed vibrators,

vaccume pump power floater, power trovel,

concrete floor cutter etc. Including approved

quality floor hardener @ 2 kg/ smt on top

surface incl. steel form work with 200 mm M.S.

channel sections incl. proper curing and

providing and filling construction joint and Rupees Five

dummy joints with "shalitax" primer silflex sheet Thousand Three

76 146.00 not less than 20 mm th. incl. rounding the edges cmt 5,326.74 Hundred Twenty Six

and cutting the groove by using concrete cutter And Paise Seventy

in zigzac pattern upto 1/ 3 depth of the RCC Four Only

thicknes and not less than 10 mm in width and

filling the grooved by dummy joints with

bitumen sealing compound of grade-A Including

making all necessary arrangments for expansion

joints at every 15 mtr's square or as per site

situation with filling bitumen etc. complete. Note:-

This item will be excluded of reinforcement but

Including centering, shuttering, MS form work,

necessary tools & plants and all required

materials etc. comp. as directed by Engg. In

Road marking with hot applied thermoplastic

paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied

thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm

area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35-2015. The

finished surface to be level, uniform and free

from streaks and holes. zebra patta/ bump patta

Hundred Sixty Seven

77 94.00 lane/ center line/ edge line/ cut patta. The white smt 367.72

And Paise Seventy

color marking should provide liminance

coefficinet on cemend road shalll be min

mcd/ m2/ lux and Asphalt road shall be min

mcd/ m2/ lux during the service life during the

day time. The marking should meet the

performance criteria for night time reflectivity,

wet reflectivity and skid resistance as mentioned

in the section-15 of IRC 35-2015. Warranty for

the Retro reflectivity should be two years.

Designing, providing and constructing GABIONS

with mechanically woven double twisted

hexagonal wire mesh of 4 mm dia. Wire zinc plus

0.5 mm thick PVC coated wire mesh with gabion

baskets of size 1 mt x 1 mt x 1mt/ required size

as per design filled with 30 to 50 kg trap rubble

78 2139.00 cmt 2,276.54 Hundred Seventy Six

stone with mesh size of 10 x 12 cm including

And Paise Fifty Four

packing, interlocking of stones, fusing top of

gabions, tying each other and laying to required

line, level and slope with all leads & lift including

foundation and body of gabions, lacing and

installation etc. completed as directed.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Grass Paver block (600 x 400 mm) Providing and

laying shot blasted interlocking/ Non-

interlocking grey/ non colored grass paver

blocks of high density 80 mm thick M-40 grade of

Alcock, Vyara, Nitco or equivalent as per

approved make for parking areas, service lanes,

Pathways and other areas as mentioned in the

drawing. Including providing and laying 50 to

mm thick average bedding layer of coarse sand

below paver block as per required grading and Rupees One

specification and 40 mm thick average FYM Soil Thousand Three

79 135.00 filling as required and Specification and aslo Smt 1,347.34 Hundred Forty Seven

including Suppying and Planting Specified Carpet And Paise Thirty Four

lown as required and Specification and Laid Only

paver block shall be mechanically compacted.

The work of the bpaving blocks shall be executed

in line and level by skilled mason of flooring

work only. Cutting of paver block by machine cut

only and laying to be done by skilled flooring

mason. The Finished surface of the Paver Block

shall have Coarse Sand Texture Finish. Paver

blocks shall be compacted and shall be relaid if

Providing and applying Stonecrete plaster/

flooring finish work on prepared surface as per

approved design, pattern, thickness and

direction, including surface preparation,

cleaning, hacking/ chipping of RCC surface

wherever required, applying bonding coat,

mixing of cement, sand, stone aggregates/

powder and approved pigments/ additives in

specified proportion, laying and finishing the

80 1851.00 Stonecrete plaster in required thickness, proper Smt 1,919.00

Hundred Nineteen

leveling, compaction and finishing with required

texture/ pattern, including grooves, bands and

joints wherever required, curing for minimum

specified period, scaffolding, labour, tools and

tackles, complete as directed by Engineer-in-

Charge. The work shall be executed in line, level

and plumb with uniform finish and shade

matching, including rectification of undulations

and protection of finished surface till completion.

Designing, providing, fixing & erection benches

complete inclusive of all material, labor,

wastages, necessary tools & tackles, adhesives,

required hardware, accessories, Carving, Any

type of framing work as per required, Necessary

civil work if required, foundation if required as

Rupees Nineteen

per design, ligting if required and work complete

including all type of material, fittings, fixtures,

81 16.00 No 19,513.20 Hundred Thirteen

Finish, loading, unloading, transporation, all

And Paise Twenty

leads, accessories, all floor, all levels, all heights

etc. complete as per drawings, specifications &

instruction of Client/ EIC. Sitting Type 1:

Providing & placing Precast Concrete with

wooden bench as per ref images or drawing.

Material: Precast Concrete with wooden backrest

& bench top: 1800 mm length x 600 x 750 mm

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and Laying 125mm thick W.B.M., in

one layers, using B.T.M.C. metal of size 40mm to Rupees One

63mm in layers including 16% stone screening Thousand Two

82 63.00 13.2mm size and 8% stone dust as filler, CMT 1,234.22 Hundred Thirty Four

including spreading, watering and cosolidation And Paise Twenty

by vibratory roller as per MoRTH specifications Two Only

etc. complete as directed by Engineer-in-charge.

Synthetic thatch at roof: Providing and fixing

Synthetic thatch work as per approved make &

Sample. Fixing on over fabrication work with

necessary nails, screws, adhesive, waterproofing,

accessories, fittings, fixtures, scaffolding, any

level, any height etc complete as per drawing and

83 24.00 Sq.mt 4,199.58 Hundred Ninety Nine

instruction of Architect/ EIC. Loose and laid

And Paise Fifty Eight

sample shall be approved by Architect and EIC

before execution. Note- Rates are inclusive of

overlapping and roof area shall be measured for

payment. Contractor shall submitt Shop drawing

for approval of Architect/ EIC before execution.

Designing, Providing and erection of 15.0mt x

5.0mt x 3.5 mt. appropriate depth "Artistic gate"

with ferro cement or FRP sturcutre 100mm

thickness of wave structure (hand made artistic)

with fish and other sea elements alongwith wave

design as per the scalled model, providing

Security Cabin both side in the gate with a

Rupees Forty Lakh(s)

84 1.00 cement mortar of 1:4 (1 cement: 4 sand), 6/ 8/ Job 40,40,000.00

Forty Thousand Only

10/ 16, 25 mm FE500 TMT bar, icken/ mosquito

wire mesh jali of 14*14 mesh, GI wire, FRP

structure, painting with required colur and

pigments and all necessary tools, equipments

and scaffolding up to etc as directed Artistic

work as per the design inclusive of ferro

structure, steel work, wave structure, painting

Boring, providing and installation bored cast-in-

situ reinforced cement concrete piles of grade M-

25 of specified diameter and length below the

pile cap, to carry a safe working load not less

than specified, excluding the cost of steel

reinforcement but including the cost of boring

with bentonite solution and temporary casing of

appropriate length for setting out and removal of

85 90.00 Rmt 1,935.56 Hundred Thirty Five

same and the length of the pile to be embedded

And Paise Fifty Six

in the pile cap etc. by percussion drilling using

Direct mud circulation (DMC) or Bailer and chisel

technique by tripod and mechanical Winch

Machine all complete, including removal of

excavated earth with all its lifts and leads (length

of pile for payment shall be measured up to

bottom of pile cap). 450 mm dia piles

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and erecting WPC (Wood Plastic

Composite) gazebo of approved design, size, and

shape, using high-quality WPC members for

columns, beams, rafters, and louvers, having

natural wood finish and resistant to moisture,

termites, rot, and UV exposure. The structural

framework shall be designed to withstand wind

load and environmental conditions, with

necessary MS/ steel inserts or supports

wherever required, duly treated with anti-

corrosive coating and finished as per

specifications. The roofing shall be WPC slats/

louvers or polycarbonate/ solid sheet (as Rupees Six Lakh(s)

specified), fixed with stainless steel fasteners, Six Thousand Only

brackets, and hardware of approved make. The

work shall include fabrication, supply,

transportation, erection, alignment, anchoring to

RCC/ finished surface using chemical/ anchor

fasteners, finishing edges, sealing joints, and

making good surrounding surfaces. All

components shall be factory finished and

installed as per manufacturer’s specifications

and as directed by the Architect/ Engineer-in-

Charge, complete in all respects including

necessary scaffolding, labour, tools, and tackles.

as approved by EIC/ Architect. 15 ' X 15 ' SIZE

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/

Architect. Item includes cost of all labour,

transport, any types of civil/ fabrication work of

fixing of play equipments etc. All works are Rupees Seventy

carried as per approval and instructions of the Seven Thousand Four

87 1.00 architect. b). Wave slide:Size: 6 ft Height & 11 Ft Nos 77,472.05 Hundred Seventy

Length Deck comprising from GI Sheet Tray 6 to - Two And Paise Five

6.5 ft height and bottom vertical Stand support Only

made from of 50 NB GI Pipe, Ladder made from

GI sheet Channel and steps in Tray form made

from GI sheet and Railing of 20 NB GI Pipe. Slide

11 ft long made from Fiber Glass Reinforced

Plastic (FRP) minimum thickness 5 mm with

support frame of MS on reversed side.

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/

Architect. Item includes cost of all labour,

transport, any types of civil, fabrication, PU paint

Rupees Twenty Nine

work of fixing of play equipments etc. All works

88 1.00 are carried as per approval and instructions of Nos 29,269.80

Hundred Sixty Nine

And Paise Eighty Only

d) Double See-Saw - 6.5 ft Length (For

Two pair seesaws of 32 NB GI Pipe with Fiber

Glass Seats 6.5 ft long, having handle of 20 NB GI

pipe and bottom frame of 32 NB GI pipe, having

MS bush and flanges for ditch-able arrangement

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/ Rupees Thirty Nine

Architect. Item includes cost of all labour, Thousand Seven

89 1.00 transport, any types of civil, fabrication, PU paint Nos 39,723.30 Hundred Twenty

work of fixing of play equipments etc. All works Three And Paise

are carried as per approval and instructions of Thirty Only

the architect. e) Giraffe Climber (8ft Height) Main

frame of 25 NB GI pipe and inside structure of

NB GI pipe, total Height of 8 ft X 1.5 ft wide

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/

Architect. Item includes cost of all labour,

transport, any types of civil, fabrication, PU paint Rupees Thirty Four

work of fixing of play equipments etc. All works Thousand Two

are carried as per approval and instructions of Hundred Six And

the architect. g) Swing (For 2 children, 7 Ft Paise Sixty Eight Only

Height) Two number sides stand (vertical) of

NB GI Pipe span 8 ft. with top Horizontal member

of 50 NB GI pipe with top frame of 15 NB GI Pipe

in Triangle Shape, Height 7 ft., 2 Nos. Seats of FRP

and zinc plated chain and kada with bearing.

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/

Architect. Item includes cost of all labour,

transport, any types of civil, fabrication, PU paint

work of fixing of play equipments etc. All works Rupees Fifty One

are carried as per approval and instructions of Thousand Seven

91 1.00 the architect. Nos 51,745.33 Hundred Forty Five

c). Merry Go round: Cup Type: Size: 5 ft Dia And Paise Thirty

Rotating bottom platform of 3 ft Dia. of FRP Three Only

Sheet 5mm thick on 25x25 mm Sqare pipe frame

vertical center shaft of heavy duty 50 NB GI pipe

with Taper Roller Bearing mounted at the

bottom and Cast Iron Bush at the top. Circular

seat of FRP Sheet 5mm thick on 25x25 mm Sqare

pipe back rest of 25 NB GI pipe of 5 ft. Dia.

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/

Architect. Item includes cost of all labour,

Rupees Sixty One

transport, any types of civil, fabrication, PU paint

92 1.00 work of fixing of play equipments etc. All works Nos 61,559.50

Hundred Fifty Nine

are carried as per approval and instructions of

And Paise Fifty Only

the architect. f) Satellite Climber: 10 ft Ht. x 7 ft

Wide Having Globe (3 ft Dia.) on top made of

NB GI pipe and four ladders connected with the

middle ring of Globe. Ladder made from 25 NB

and 20 NB GI pipe and reeling of 15 NB GI Pipes.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Children Play Equipment: Providing and

installing selected and specified children play

equipments as per the drawings and

specifications as per instructions of EIC/

Architect. Item includes cost of all labour,

transport, any types of civil, fabrication, PU paint

work of fixing of play equipments etc. All works Rupees Fifty Four

are carried as per approval and instructions of Thousand Nine

93 1.00 the architect. f1) Rock & Rope Climber: Size: 6ft Nos 54,997.53 Hundred Ninety

Ht & 4ft Wide Frame made from 40 NB GI pipe Seven And Paise Fifty

on both side, height 7 ft X 4 ft width on one side Three Only

Rope Net of good quality Nylon rope inter link

with each other with plastic semi circular clamps.

On other side Fiber Glass Sheet is fitted on frame

which is mounted with Rock shape made from

Fiber Glass moulds properly secured with bolt on

Fiber Glass Sheet (5mm Thick).

Providing and laying WPC (Wood Plastic

Composite) beach boardwalk (width -1800 mm)

over PCC base, comprising of approved make

WPC decking boards of size approx. 140–150

mm wide and 20–30 mm thick, having anti-skid

grooved surface, fixed with stainless steel (SS

304) hidden clips and screws over aluminium/

GI joist framework. The joists (minimum size

40×40 mm or equivalent) shall be fixed over the

prepared PCC base using suitable brackets and

SS anchor fasteners at required spacing

(300–400 mm c/ c), ensuring proper alignment,

level, and slope for drainage. A waterproof Rupees Ten

94 170.00 membrane/ protective layer shall be provided RMt 10,403.00 Thousand Four

over the PCC surface before fixing the joist Hundred Three Only

framework to prevent moisture ingress and

corrosion.The PCC base (M15 or as specified)

shall be laid over well-compacted subgrade with

proper slope (minimum 1:100) towards

drainage outlets. WPC planks shall be laid with

uniform spacing of 5–8 mm between boards to

allow for thermal expansion and water drainage.

All exposed edges shall be finished with WPC

fascia boards/ end caps. The work shall include

all materials, labour, T&P, cutting, edge finishing,

alignment, leveling, fastening, and all incidental

works required to complete the boardwalk as

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and developing outdoor natural play area

comprising of sand-filled activity zone with WPC/

treated wooden play elements including balancing

logs, stepping posts, rope bridge, hanging log

obstacles, seating blocks, and edge restraints,

complete in all respects.The work shall include

excavation to required depth, preparation and

compaction of subgrade, and filling with clean river

sand of approved quality to a minimum thickness of

300–450 mm, properly leveled and compacted.Play

elements such as vertical posts, beams, and logs shall

be made of WPC/ treated hardwood sections of

approved size, fixed firmly in ground with PCC (M15)

Rupees Four Lakh(s)

95 1.00 foundations of suitable size to ensure stability and Job 4,04,000.00

safety.Rope elements shall be made using high-

Four Thousand Only

strength, weather-resistant nylon/ PP ropes securely

anchored to posts with SS hardware. Hanging and

balancing elements shall be properly aligned and

tested for load stability.Recycled rubber tyres (half-

buried) and timber edging shall be provided as

boundary elements, fixed securely in position.All

edges, corners, and surfaces shall be smooth,

rounded, and free from sharp projections to ensure

user safety. The work shall include all materials,

labour, excavation, PCC, sand filling, fixing, alignment,

finishing, and all incidental works complete as per

drawings and directions of the Engineer-in-Charge.

This proposal covers the design, engineering,

fabrication, supply, transportation, unloading, and

installation of a high-performance portable

prefabricated male and female washroom unit at

Kuba, Bhavnagar for Tourism Corporation of Gujarat

Ltd. (TCGL). The unit, measuring approximately 40 ft

× 12 ft × 9 ft, is constructed using GreenPro-certified

Silica Composite Panels, ensuring sustainability, low

carbon footprint, and full lifecycle recyclability. The

structure is built on a precision-engineered GI light

gauge steel frame fabricated through CNC laser

cutting and NC bending, designed to withstand wind

speeds up to 120 km/ h, comply with seismic zone IV

requirements, and support a load-bearing capacity of Rupees Thirty Five

96 1.00 320 kg/ m². The wall system comprises a multi- Job 35,35,000.00 Lakh(s) Thirty Five

layered composite assembly providing superior fire Thousand Only

resistance, thermal insulation (R-value ≥10), termite-

proofing, moisture resistance, and frost protection.

The roofing includes a 2 ft front canopy and 1 ft

projections on all sides with a fire-, heat-, and water-

resistant assembly finished with bitumen and UV-

resistant membranes. Flooring is finished with anti-

skid marble/ granite with proper slope towards

drainage points, while interiors feature a

combination of PVC fluted panels, ACP, and tile/

marble/ granite finishes for durability and hygiene.

The unit is equipped with corrosion-resistant

outward-opening doors with secure locking systems,

ISI-marked FRLS electrical wiring, energy-efficient

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and fixing double scaffolding system

(cup lock type) on the exterior side, up to seven

story height made with 40 mm dia M.S. tube

m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes,

M.S. tube challies, M.S. clamps and M.S. staircase

system in the scaffolding for working platform

etc. and maintaining it in a serviceable condition

Rupees Two Hundred

for the required duration as approved and

Eighty Seven And

97 407.00 removing it there after.The scaffolding system SMT 287.85

Paise Eighty Five

shall be stiffened with bracings, runners,

connection with the building etc wherever

required for inspection of work at required

locations with essential safety features for the

workmen etc. complete as per directions and

approval of Engineerin-charge.The elevational

area of the scaffolding shall be measured for

payment purpose.The payment will be made

once irrespective of duration of scaffolding.

Removing and scraping of old deteriorated

plaster of any thickness from wall/ R.C.C member

Rupees Twenty And

98 1433.00 including stacking of serviceable material and SMT 20.36

Paise Thirty Six Only

disposal of unserviceable from site of work with

all lead and lift

Demolition of Brick work and stone masonry Rupees Three

including stacking of serviceable materilas and Hundred Eighty

disposal of unserviceable materials with all lead Three And Paise Five

and lift. (i) In Lime Mortar. Only

Rupees Five Hundred

Demolition and disposal of unserviceable

101 13.00 CMT 554.06 Fifty Four And Paise

materials with all lead and lift.(i) Lime concrete.

Dismentling wood work, wrought framed and

102 14.00 fixed in frames trusses including stacking the CMT 1,840.02

Hundred Forty And

materials with all lead and lift.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats Rupees Two Hundred

103 23.00 architraves, holdfasts and other attachment etc. NOS 263.35 Sixty Three And Paise

complete and stacking them within all lead and Thirty Five Only

Demolition including stacking of serviceable

104 27.00 materilas and disposal of unserviceable CMT 1,108.12

Hundred Eight And

materials with all lead and lift. (i) R.C.C. work

Paise Twelve Only

Mix lime mortar to the lime water which is to be

applied with natural additives like jaggery,

soapnut, bhel fruit, etc depends upon the region

Wet the surface.Remove all the dust particles.

105 1026.00 SMT 1,405.25 Hundred Five And

Apply lime plaster up to required

Paise Twenty Five

thickness.Rework on the plaster to Lime plaster

1:1:1 (1 lime putty: 1 surkhi: 1 finesand) 15mm

thick‐ single coat

Providing and applying lime-based colour finish

manually over prepared lime plaster surface in

two coats, including surface preparation, curing,

Hundred Thirty One

106 1026.00 and complete application. The first coat shall be SMT 431.12

And Paise Twelve

executed using Oikos make or other equivalent

approved lime-based product, as directed by the

Architect/ Engineer-in-charge.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Stitching of cracks in masonry with stone lintels

of 450x 200x50 mm. Chasing, grooving the brick Rupees Two Hundred

107 138.00 masonry and inserting the stone lintel. All NOS 262.54 Sixty Two And Paise

around the stone, lime mortar should be Fifty Four Only

properly packed. lintel for Stitching (Internally).

Steel‐rod stitching incracked stone patties, beam,

and lintels.Providing and fixing stainless steel

rods of 90cms length of which 15cm on either

side and cold bending at 90degrees. The stainless

steel clamps to be fixed perpendicular to the

crack by drilling in stone and fixing with cement Rupees Two Hundred

108 34.00 and aradite mixture in such a way that the entire NOS 205.52 Five And Paise Fifty

length of the rod is in complete contact of the Two Only

stone and the bent ends are fully inserted in the

cracked stone. Use 316 grade stainless steel

charge per hole.steel rod charges are counted

per kg.Holes with 6mm, 8mm, 10mm or 12mm

dia.as per requirement of position.

Providing & injecting lime based injection

mortar, free from efflorescing salts and suitably

combined with additives for structural

Rupees One Hundred

consolidation of masonry, stucco & façade at

109 68.00 NOS 193.14 Ninety Three And

junctions of stuccos by drilling holes and

Paise Fourteen Only

injecting till rejection & sealing hole with

Composite of aggregates and epoxy resins for the

reconstruction, the grouting.

Providing protective coating of water repellent

siloxane (transparent in color) through brush or Rupees Two Hundred

110 407.00 spray untill complete impregnation over SMT 242.23 Forty Two And Paise

completelyb cleaned and dried stone orplastered Twenty Three Only

surface to reduce the absorption of water.

Stone work in plain ashlar masonry in

Rupees Thirty One

superstructure in lime mortar 1:1:1 (1 lime:1

111 18.00 surkhi:1 coarse sand) including pointing with CMT 31,445.10

Hundred Forty Five

lime mortar and an admixture of pigment

And Paise Ten Only

matching the stoneshade.Plain Work

Lime concrete terracing on roofs with 25mm

nominal size brick aggregate and 50% lime Rupees Twelve

mortar 1:2 (1 Slaked lime: 2 surkhi) rammed and Thousand Eighty

finished with Gur and belgiri treatment complete Four And Paise Sixty

including rounding of junctions with parpaet Three Only

Brick work with common burnt clay F.P.S. (non Rupees Eight

modular) bricks of class designation 7.5 in Thousand Five

113 9.00 superstructure above plinth level up to floor V CMT 8,597.22 Hundred Ninety

level in all shapes and sizes in Cement mortar 1:4 Seven And Paise

(1 cement: 4 coarse sand) Twenty Two Only

Rupees Six Thousand

Providing and fixing Teak wood planking of

Two Hundred Twenty

114 553.00 mm thk for flooring/ planking in the Roof above SMT 6,225.01

Five And Paise One

Providing and dammering to roof with two coats Rupees Two Hundred

115 553.00 of bitumen on new dungree cloth one coat on SMT 203.92 Three And Paise

each side etc. complete as directed. Ninety Two Only

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and fixing 24 gauge zero punture

alluminium sheet in such a way that alluminum

sheet will be fixed between horizontal & vertical

Battens. plain alluminium sheet on including top

116 553.00 SMT 1,301.87 Hundred One And

of plank ceiling of the M.T. roof portion of

Paise Eighty Seven

required size using cutting to required size and

fixing by screws including making goodwater

tight etc. complete.

Providing and fixing horizontal and vertical Rupees Two Hundred

117 3647.00 battens of 2"x1" with 18 gauge aluminium RMT 212.71 Twelve And Paise

sticker. Seventy One Only

Providing and fixing new Clay roofing tiles with Rupees Five Hundred

118 553.00 class "AA" in proper line and level etc as per site SMT 546.92 Forty Six And Paise

condition complete. Ninety Two Only

Providing and fixing new ridges as per design Hundred Eighty One

given by Consultant. And Paise Sixty One

Providing and fixing valley gutter of 0.80 mm Rupees Seven

thickness (22 B.W.G.) plain alluminium sheet 90 Hundred Nine And

cm wide with country teak wood planking 20 Paise Twenty Six

Providing and fixing Lead Flashing over Chajja/

slab shall be housed approximately 300 mm or Rupees Four

as per site condition above chajja/ slab/ Thousand Eight

Vallygator vatta in a mortar joint of adjoining Hundred Eleven And

masonry wall, this sheet shall be sloping Paise Sixteen Only

Rupees Thirty Seven

Presevative Treatment for wood performing hot

& cold method by boiling leenseed oil &

122 16.00 CMT 37,226.46 Hundred Twenty Six

chloropyrophos at 90 temperature for atleast

And Paise Forty Six

minutes then gradullly reduce the temperature.

123 53.00 Providing & Fixing of Eaves Board. RMT 2,404.42

Hundred Four And

Paise Forty Two Only

Rupees Two Lakh(s)

Providing, making and fixing 1st class well

seasoned wooden frames for Windows, Doors,

124 16.00 Arches, purlins, Rafter Etc including all the CMT 2,87,228.41

Eight And Paise Forty

Providing/ Fixing Wooden panel door made of

Rupees Fourteen

using TW panels/ Glass & rails of size as per

Thousand Seventy

125 88.00 drawing. Wooden door to be finished with SMT 14,079.21

melamine polish & to match with existing

Twenty One Only

wooden panel doors.

Providing anti termite treatment by coating or

Rupees One Hundred

spraying oil based or equivalent approved

Twenty Seven And

126 70.00 chemical s per IS 6313 (Part III) to the perimer of RMT 127.83

Paise Eighty Three

the building or perphery where they are termite

infrested as directed.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and fixing heavy duty decorative type

brass hardware as per existing design, size and Rupees Two

pattern per the weight of the original hardware Thousand Three

127 70.00 including all necessary fixtures like brass KG 2,372.04 Hundred Seventy

screwsetc. complete. Item to include preparing Two And Paise Four

samples for approval from the Architect before Only

making the entire lot.

Providing and applying Melamine polish of Rupees Nine Hundred

required finish to woodwork internally including Eighty Eight And

knotting and preparing surface by scraping, Paise Ninety Three

applying Melamine polishing complete. Only

Providing and fixing of plain Coloured embossed

Glass in required size & shape for window &

129 32.00 SMT 3,125.18 Hundred Twenty Five

other missing panel of approved make and

And Paise Eighteen

Earth work in excavation by mechanical means

(Hydraulic excavator)/ manual means over areas

(exceeding 30 cm in depth, 1.5 m in width as well Rupees Two Hundred

130 48.00 as 10 sqm on plan) including getting out and CMT 207.50 Seven And Paise Fifty

disposal of excavated earth lead upto 50 m and Only

lift upto 1.5 m, as directed by Engineer-in-

charge.All Kinds of Soil.

Random rubble masonry with hard stones in

Rupees Six Thousand

foundation and plinth including levelling with

Two Hundred Eighty

131 27.00 lime concete (1 lime:3surkhi:6 coarse sand) with CMT 6,286.25

Six And Paise Twenty

40mm stone aggregate upto plinth level with

lime mortar 1:1:1(1Lime: 1Surkhi:1Coarse sand)

Providing and laying Athangudi heritage revival

tiles of size 200 × 200 mm and 14–16 mm

thickness, plain colour or in combination of one

or more colours, matching the original flooring

pattern and layout as per design, shade, and

direction of the Architect. Tiles shall be laid over

prepared base in cement-sand mortar bed of

average thickness 15–35 mm using OPC 43/

grade cement in proportion not leaner than 1:4, Rupees One

including application of neat cement slurry for Thousand Eight

proper bedding. Joints shall be kept as fine as Hundred Sixty Seven

possible and filled with matching coloured And Paise Sixty Only

cement mortar/ pigmented grout, complete as

directed. The work shall include curing, surface

rubbing, machine/ manual polishing to obtain

smooth, even, and glossy heritage finish,

cleaning, protection, and all materials, labour,

tools & tackles, lead & lift, scaffolding, wastage,

and all incidental charges complete to finished

Driling of bore 215 mm Dia strata (0 to

metre) Indcluding lowering and fixing of 175 mm Rupees Three

dia ERW pipes/ PVC pipe up to required depth Hundred Thirty And

and furthether driling of 165 mm dia bore hole in Paise Twenty Seven

rocky strata DTH ring indluding fiting etc. Only

complete (As per Zone)

Rupees Nine Hundred

Supply of 175mm dia UPVC casing pipe:Cstype:

134 100.00 Meter 915.06 Fifteen And Paise Six

of si marked approved qulity

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing standerd lenth ISI mark high density

polythenc HDPE pipes suitale for potable water

Rupees Fifty Five And

135 100.00 as per IS speecification 4984/ 1995 ncluding all Meter 55.55

Paise Fifty Five Only

charges etc, cmplete 40 mm dia (10 kg/ Sqm

Rupees Twenty Three

Single phase submersible Motorset with control Thousand One

136 1.00 panel up to 3.0 HP with necessary fitting Nos 23,175.46 Hundred Seventy

complet.(20 LMP/ 180 Head/ 40dia Pipe) Five And Paise Forty

Lowering of submersible motor pump set

complete with required Nos. and size of column

pipe (GI/ HDPE pipe) erected by means of

137 1.00 proper chain pulley block & and pipe tenches Job 1,010.00

Thousand Ten Only

after checking of threads of eachpipe with

coupling to take the load of the pumpset and.(d)

Rupees One Hundred

Providing Flat PVC cable for submersible pumnp

Twenty Four And

138 120.00 as per detail specification as per GWSSB R/ C Meter 124.23

Paise Twenty Three

Size of 4.00Sq.mm.

Providing and fixing M.S.Clamp with 5mm thick Thousand Two

139 1.00 M.S.plate bore plug including arrangement with Nos 1,227.82 Hundred Twenty

nuts, bolts and lock nuts etc.complete. Seven And Paise

Eighty Two Only

Designing, Providing and erection of 8.0mt x

mt x 1.5 mt. appropriate depth "Artistic gate"

with ferro cement or FRP sturcutre 100mm

thickness of wave structure (hand made artistic)

with dolphin and sea turtle and other sea

elements alongwith wave design as per the

scalled model with a cement mortar of 1:4 (1 Rupees Thirty

cement: 4 sand), 6/ 8/ 10/ 16, 25 mm FE500 Lakh(s) Only

TMT bar, icken/ mosquito wire mesh jali of

14*14 mesh, GI wire, FRP structure, painting

with required colur and pigments and all

necessary tools, equipments and scaffolding up

to etc as directed Artistic work as per the design

inclusive of ferro structure, steel work, wave

structure, painting etc.

SculptureDesign

Designing, Providing and erection of pelican

sculpture 2 mtr. height in stainless steel with MS

sctructure finish, work by experienced artists Rupees Thirteen

giving all shapes and expression as approved by Lakh(s) Only

EIC, natural look finishing, Buffing, weilding,

Grinding with all required Machinery and Other

SculptureDesign

Designing, Providing and erection Sea turtle 6 ft.

Rupees Nine Lakh(s)

142 1.00 Height. In Metal sheet with Rustic effect paint, MS Job 9,00,000.00

sctructure, natural look painting with all

required Machinery and Other Equipment

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

SculptureDesign

Designing, Providing and erection Dolphin

Sculpture 7 ft. height in Mild Steel with MS Rupees Eight Lakh(s)

sctructure, hand work by experienced artists Only

giving all shapes and expression as approved by

EIC, with all required welding, equipments.

SculptureDesign

Designing, Providing and erection Crocodile 8 ft.

Rupees Eight Lakh(s)

144 1.00 Length. In Metal sheet with Rustic effect paint, Job 8,00,000.00

MS sctructure, natural look painting with all

required Machinery and Other Equipment

Point wiring for Light/ Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type

switch/ bell push & accessories and earth

continuity of following type, erected on PVC/

Hundred Eighty Five

145 100.00 Metallic/ Wooden box, single mounting base Pt. 485.81

And Paise Eighty One

frame covered with textured/ metallic/ white

front plate modules erected on/ in wall/ ceiling

as per pipe erected, with necessary Lamp

holder/ ceiling rose/ H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling

complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of.ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of

Rupees Six Hundred

following type erected on PVC/ Metallic/

146 15.00 Pt. 674.68 Seventy Four And

Wooden box, single mounting base frame

Paise Sixty Eight Only

covered with textured/ metallic/ white front

plate modules erected on/ in wall/ ceiling as per

pipe erected. with necessary ceiling rose/

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling

complete Cat-III

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC/ Metallic/

Wooden box covered with appropriate front Rupees Five Hundred

147 20.00 plate modules erected on/ in wall/ ceiling as per Pt. 510.05 Ten And Paise Five

pipe erected with following type of accessories. Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/ mcb db

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling

completeCat-III

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on

Rupees Two Hundred

PVC/ Metallic/ Wooden box, single mounting

148 25.00 Pt. 257.55 Fifty Seven And Paise

base frame covered with textured/ metallic/

Fifty Five Only

white front plate modules erected on/ in wall/

ceiling with following type accessories. Cat.III

Providing following type of Modular Type

Accessories mounted with PVC/ metallic/

Wooden box, single mounting base frame

Rupees One Hundred

covered with textured/ metallic/ white front

149 25.00 Pt. 180.79 Eighty And Paise

plate, modules erected with necessary

Seventy Nine Only

connections as per site situation directed by

Engineer In charge.

(9) 16 Amp. SP one way switch Cat.III

Providing following type of Modular Type

Accessories mounted with PVC/ metallic/

Wooden box, single mounting base frame Rupees One Hundred

covered with textured/ metallic/ white front Ninety Nine And

plate, modules erected with necessary Paise Ninety Eight

connections as per site situation directed by Only

Engineer In charge.

(10) 6/ 16Amp. Universal socket Cat.III

Point wiring for Two Way Controlled Light Point

with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of.ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires erected

in below type of pipe with 6A Modular type

switches and following type of accessories

erected on PVC/ Metallic/ Wooden box, single

Rupees Six Hundred

mounting base frame covered with textured/

151 20.00 Pt. 603.98 Three And Paise

metallic/ white front plate modules erected on/

Ninety Eight Only

in wall/ ceiling as per pipe erected. with

necessary batten/ angle holder or ceiling rose or

H.D.Connector as directed.ss will be considered

as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ ceiling

complete Cat-III

Rupees One Hundred

(4) TV Co-axial Socket outlet

152 10.00 Nos 160.59 Sixty And Paise Fifty

Rupees Twenty Five

(7) Blank Plate Single

153 10.00 Nos 25.25 And Paise Twenty

Rupees One Hundred

(8) Computer Open RJ-45 socket

154 30.00 Nos 160.59 Sixty And Paise Fifty

Conduits & Pipes

Providing and erecting ISI mark Medium class

RIGID PVC PIPES of following size complete to be

Rupees Twenty Four

erected on/ in wall or ceiling erected with

155 50.00 Mtr. 24.24 And Paise Twenty

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

Rupees Thirty Three

156 200.00 b) 25 mm Mtr. 33.33 And Paise Thirty

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Rupees Fifty Four

157 50.00 c) 32 mm Mtr. 54.54 And Paise Fifty Four

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC Rupees Seventeen

158 50.00 bushes, Check-nuts etc. complete of following Mtr. 17.17 And Paise Seventeen

Rupees Twenty One

159 50.00 (3) 25 mm Mtr. 21.21 And Paise Twenty

Providing and erecting Mains with 1.1 KV grade

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in/ flushed on wall/ ceiling,

Rupees Eighty Two

with 1.5 sq. mm copper conductor FRLS PVC

160 800.00 Mtr. 82.82 And Paise Eighty Two

insulated stranded wire of green colour for earth

continuity of following size

(a) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm (From Floor DB to Each

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in

following type of pipe to be erected in/ on wall/ Rupees One Hundred

161 240.00 ceiling with 2.5 sq. mm copper conductor FRLS Mtr. 112.11 Twelve And Paise

PVC insulated stranded wire of green colour for Eleven Only

earth continuity of following size

(a) 2 wire 4 sq. mm

Providing & Erecting approved make following

size of TV Co-axial flexible cable comprising

inner conductor of solid bare copper insulated

Rupees Thirty Nine

with Foam PE & Secondary conductor made of

162 100.00 Mtr. 39.39 And Paise Thirty Nine

poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black

PVC insulation.

Supplying & erecting approved make LAN cable Rupees Forty Seven

163 900.00 of following size in existing pipe as per direction Mtr. 47.47 And Paise Forty

[C] CAT - 6 Seven Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

164 10.00 Mtr. 1,407.94 Hundred Seven And

necessary clamps or in existing trench/ pipe of

Paise Ninety Four

following size of cables

(J) 3 1/ 2 core 300 Sq.mm (150 Sq. mm 1/

Rupees Nine Hundred

(H) 3 1/ 2 core 185 Sq. mm (95 Sq. mm 1/

165 150.00 Mtr. 904.96 Four And Paise

Ninety Six Only

ARMOURED ALLUMINIUM CABLES.

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium

Rupees One Hundred

conductor for 1.1 KV. to be laid on wall with

166 700.00 Mtr. 153.52 Fifty Three And Paise

necessary clamps or in existing trench/ pipe of

following size of cables

d) 4 Core 16 Sq.mm.(For Street light and

Resturant power)

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand/ Solid Aluminium

conductor for 1.1 KV. to be laid on wall with Rupees One Hundred

167 1900.00 necessary clamps or in existing trench/ pipe of Mtr. 140.39 Forty And Paise

following size of cables Thirty Nine Only

c) 4 Core 10 Sq.mm. (For Tent and infra Lighting

ARMOURED COPPER CABLES.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor

Hundred Ninety Five

168 50.00 for 1.1 KV. to be laid on wall with necessary Mtr. 395.92

And Paise Ninety

clamps or in existing trench/ pipe at road

crossing or floor of following size of cable.

b) 3 Core 6 Sq.mm.

Rupees Two Hundred

Eighty Seven And

169 50.00 B) 3 Core 4 Sq.mm. Mtr. 287.85

Paise Eighty Five

Making trench in soft soil of suitable width of

Rupees Fifty Five And

170 850.00 cms deep for laying cable or locating the fault all Mtr. 55.55

Paise Fifty Five Only

over the run and back filling the same and

making the surface as a normal ground.

Drilling the road without breaking the road

surface (Asphalt) for laying of cable for feeding

Hundred Ninety Two

171 20.00 power supply by making upto 150mm dia. size of Mtr. 492.88

And Paise Eighty

holes at both ends complete.

(A) Up to 100 mm bore dia

Providing and erecting iron clad cable route

Rupees Two Hundred

marker duly marked with ELE.CABLE of size

172 10.00 Nos 240.38 Forty And Paise

cms.X 12 cms. Flushed with ground in cement

Thirty Eight Only

foundation as directed by Engineer incharge.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II)with

Rupees Sixty Two

necessary connecting accessories of same

173 400.00 Mtr. 62.62 And Paise Sixty Two

material at required depth in existing trench for

laying of cable. below ground/ road surface for

enclosing cable

(A)50 mm outer dia

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II)with

Rupees One Hundred

necessary connecting accessories of same

174 1345.00 Mtr. 137.36 Thirty Seven And

material at required depth in existing trench for

Paise Thirty Six Only

laying of cable. below ground/ road surface for

enclosing cable

(D)120 mm outer dia.

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC Rupees Thirty Eight

175 100.00 insulated armoured cable complete with out Nos 38.38 And Paise Thirty

going tails, insulating tape etc for following size Eight Only

(C) 2 to 4 core 10 Sq. mm

Rupees Forty Seven

176 10.00 d) 2 to 4 Core 16 Sq.mm Nos 47.47 And Paise Forty

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

Rupees Two Hundred

insulated armoured cable complete with out

177 2.00 Nos 238.36 Thirty Eight And

going tails, insulating tape etc for following size

Paise Thirty Six Only

(G) 3 & 1/ 2 core 185 Sq. mm

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

Rupees Two Hundred

insulated armoured cable complete with out

178 2.00 Nos 280.78 Eighty And Paise

going tails, insulating tape etc for following size

Seventy Eight Only

(I) 3 & 1/ 2 core 300 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool & Rupees Thirteen And

connected to switchgear terminals with brass/ Paise Thirteen Only

cadmium plated nut bolts in an approved

Rupees Fifteen And

Paise Fifteen Only

Rupees Eighty And

Paise Eighty Only

Rupees Ninety Eight

182 8.00 (K) 300 Sq.mm. Nos 98.98 And Paise Ninety

Providing and fixing printed instruction chart

both in English and Gujarati and duly framed Rupees One Hundred

183 1.00 with front glasses, for treatment of person Nos 130.29 Thirty And Paise

suffering from Electric shock with minimum 50" Twenty Nine Only

diagonally size.

Supplying & erecting carbon dioxide (CO2) fire

Rupees Six Thousand

extinguisher user of following capacity with

Five Hundred Ninety

184 4.00 necessary clamps made from 50 x 6 mm M.S. Flat Ea 6,591.26

with nut & bolts grouted in wall complete.

Twenty Six Only

[A] For 4.5 Kg Capacity

MINIATURE CIRCUIT BREAKERS.

providing and erecting Miniature circuit breaker

single pole 6A to 25A suitable to operate on 240 Rupees One Hundred

185 120.00 V A.C. system and having breaking capacity 10 Nos 112.11 Twelve And Paise

KA to be erected in existing box. confirming to IS Eleven Only

8828/ 1996 with ISI Mark

Providing & erecting 240 V MCB double pole

Rupees Two Hundred

switch for lighting Load (B Curve) having 10 KA

Seventy Eight And

186 10.00 breaking capacity & confirms to IS: 8828 in Nos 278.76

Paise Seventy Six

existing box having following capacity

(A) 6 to 32 Amp. Cat-III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

187 6.00 breaking capacity & confirms to IS:8828 in Nos 737.30

Seven And Paise

existing box having following capacity

(c)63 Amp. Cat.III

Providing & erecting 415V MCB Four Pole Switch

Rupees Six Hundred

for Lighting Load (B curve) having 10KA

Thirty Eight And

188 6.00 breaking capacity & confirms to IS:8828 in Nos 638.32

Paise Thirty Two

existing box having following capacity

(b)40 Amp. Cat.III

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush/ surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC Rupees Three

61439-1 & 3 without MCB to house appropriate Hundred Fifty Five

nos. of MCBs.(The DBs should be used of same And Paise Fifty Two

company of MCB to be used) suitable for Only

(A) single phase incoming and horizontal single

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush/ surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC Rupees Two

61439-1 & 3 without MCB to house appropriate Thousand Four

190 2.00 nos. of MCBs.(The DBs should be used of same Nos 2,445.21 Hundred Forty Five

company of MCB to be used) suitable for And Paise Twenty

(B) three phase incoming and single phase One Only

horizontal type outgoing Per phase isolation type

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush/ surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

Rupees Five Hundred

61439-1 & 3 without MCB to house appropriate

191 1.00 Nos 582.77 Eighty Two And Paise

nos. of MCBs.(The DBs should be used of same

Seventy Seven Only

company of MCB to be used) suitable for

(A) single phase incoming and horizontal single

EARTH LEAKAGE CIRCUIT BREAKERS.

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of 10 Rupees Two

KA and suitable for operation on single phase Thousand Two

192 9.00 240 V, 50Hz. having characteristic of quick action Nos 2,235.13 Hundred Thirty Five

& tripping with all advance feature & do not And Paise Thirteen

incorporate any electronic component. for Only

following Max. rating erected as directed

(ii) 40Amps. DP

193 1.00 (iii) 63 Amps. DP Cat-III Nos 2,654.28 Hundred Fifty Four

And Paise Twenty

194 1.00 (i) 25 Amps.DP Cat-III Nos 1,969.50

Hundred Sixty Nine

And Paise Fifty Only

Providing and erecting metallic vitrified danger

Rupees Sixty Nine

notice board as per language suggested by

195 1.00 Nos 69.69 And Paise Sixty Nine

engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having Rupees Sixteen

Normal current rating 200A.with variable Thousand Two

196 1.00 Thermal & magnetic release suitable to work on Ea. 16,221.61 Hundred Twenty One

A.C.supply 50 c/ s. with all internal connections, And Paise Sixty One

spreader tinned copper & complete erected in Only

existing 16 G.M.S.housing

ICS=100% of ICU only Cat III

Pproviding and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V, having

Rupees Six Thousand

normal current rating up to 25 A to 100A. with

One Hundred Seventy

197 2.00 Fixed thermal & magnetic release suitable to Nos 6,173.12

Three And Paise

work on A.C. supply 50 c/ s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Supplying and erecting triple pole & neutral

440V/ 500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp./ sq.mm

(Rated current/ cross section area) duly

wrapped with colour insulating tape for phase Rn.Mt

198 4.00 3,202.71 Hundred Two And

sequence of following current carrying capacity, r

Paise Seventy One

erected with necessary bus bar supports/

insulators, main cable socket to each bar, erected

in existing cubical panel with necessary

(B) Suitable for 200 Amp. capacity

Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

indoor type cubical panel board having IP-64

protection made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary

supporting angles, flats including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection

of supplied switch gears, BUSBARS, with suitable Rupees Nineteen

size of inter connecting PVC copper wire/ copper- Thousand Three

199 4.00 aluminium strips, rubber grommets, rib, bakelite 19,387.96 Hundred Eighty

control fuses for measuring instruments, earth Seven And Paise

bus & earth bolts, foundation flange - bolts-base Ninety Six Only

Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket

complete. The Panel shall be painted with epoxy

powder coating.

(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

following size.

Supplying and erecting approved make suitable Rupees Forty Three

200 12.00 panel indicator LED type lamp, lens cover, Nos 43.43 And Paise Forty

complete erected with necessary connections. Three Only

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

providng and erecting Approved make energy

meter 3 phase 4 wire unbalanced load rating,

10A to 60 Amp. based on ASIC(Application

specific Integral Circuits) digital technology with

accuracy Class - 1, temper proof, free from effect

of external magnetic field with 3 phase

201 3.00 Each 2,696.70 Hundred Ninety Six

indication, earth & impulse indication, 6 digit

And Paise Seventy

electro mechanical impulse counter, suitable

work on 120 V to 300V per phase 45-55 HZ,

housed in robust enclosure with erection as

providng and erecting Suitable set of CTS for

202 3.00 Each 2,105.85 Hundred Five And

100A Energy Meter

Paise Eighty Five

Supplying and erecting approved make panel Rupees One

mounting type Digital Voltmeter having 3 digits Thousand Two

203 3.00 LED display, 0 to 750 AC Volts range erected on Ea. 1,275.63 Hundred Seventy

existing panel board with all connection, wiring Five And Paise Sixty

etc.with manufacturers calibration certificate. Three Only

Supplying and erecting approved make panel

mounting type Digital Ammeter having 3 digits Rupees One

LED display, external CT operated, calibrated for Thousand Five

204 3.00 0 to 1000 Amps suitable to operate on 500 Volt Ea. 1,558.43 Hundred Fifty Eight

AC, erected on existing panel board with all And Paise Forty

connection, wiring etc.with manufacturers Three Only

calibration certificate.

Supplying and erecting Ammeter/ Voltmeter

Hundred Seventeen

205 3.00 selector switch for 3 phase AC Supply 500 V on Ea. 317.14

And Paise Fourteen

existing panel board with necessary connections.

Mains with ISI marked, 1.5KV grade electrolyte

multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

IEC - 227 erected in existing pipe of following Rupees Thirty Seven

206 50.00 size (Specifically for control panel, relays, power Mtr. 37.37 And Paise Thirty

switchgears, motor starters & control wiring) Seven Only

with required size of copper lugs, nuts and bolts

(d) One wire 4.00 sq. mm

Rupees Fifty Six And

207 20.00 (e) One wire 6.00 sq. mm Mtr. 56.56

Paise Fifty Six Only

Rupees Ninety One

208 50.00 (f) One wire 10.00 sq. mm Mtr. 91.91 And Paise Ninety One

Rupees One Hundred

209 50.00 (g) One wire 16.00 sq. mm Mtr. 142.41 Forty Two And Paise

Providing, erecting, fabricating the M.S. structure

as per requirement on site incorporating proper

size of M.S. angles, flats, bars, channels, sections

complete with cutting, welding, grinding &

210 100.00 Kg. 77.77 Seven And Paise

finishing duly painted with one coat of red oxide

Seventy Seven Only

with erection on site as per direction of engineer

in charge with necessary grouting, cementing,

plastering & finishing complete.

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Fabricating the box type items made from M.S.

Sheet with A.I. supports, wings, doors, handles

Rupees One Hundred

other hardware materials as per requirement

211 100.00 Kg. 180.79 Eighty And Paise

design with finishing by three tank powder

Seventy Nine Only

coating processed inside and outside painted,

erected as directed including minor civil work.

Painting by cleaning, the surface and applying

Rupees One Hundred

one coat of primer and two coats of enamel paint

212 10.00 Smt. 146.45 Forty Six And Paise

for meter cup-board or base plate suitable to

Forty Five Only

match the wall finish

Painting the number and words for inventory

Identification on erected fittings/ equipment’s or

Rupees Twenty Two

Such accessories as may required with good

213 20.00 Ea. 22.22 And Paise Twenty

quality of enamelled paint as directed by

engineer in charge.

(i) up to 20 characters, up to 50 mm height.

214 20.00 (ii) Add. for additional character. Ea. 2.02

Rupees Six And Paise

215 20.00 (iii) Add for additional each 25mm. height Ea. 6.06

CEILING FANS AND ACCESSORIS.

Supply, Installation, Testing and Commissioning

of suitable sweep, BEE 5 Star rated, Ceiling fan

with Brush Less Direct Current (BLDC)

permanent ferrite magnet Motor, class of

insulation: B, Rust free 3 nos.Aluminium blades,

2 nos. canopies, shackle kit with earthing

provision, copper winding, Power factor not <

0.9, Service Value (CMM/ W) minimum 6.85, Air

delivery minimum 215 CMM, 350 RPM, 230v

216 10.00 Nos 2,885.57 Hundred Eighty Five

(tolerance as per IS: 374-2019), THD < 10%,

And Paise Fifty Seven

with remote unit for Speed Control and all

remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C

(Max.), suitable for 140 to 285 Voltage and

rectifier circuit with surge, over current and

overload protection, 50 Hz, Single phase AC

Supply, earthing etc. Complete as required.[

Make shall be approved by Engineer in Charge]

(B) 1200 mm Sweep (48")

FAN ACCESSORIES.

Supplying and erecting 19/ 20 mm. nominal bore Rupees One Hundred

217 1.00 Medium Class M.S. Pipe down rod erected duly Mtr. 108.07 Eight And Paise

painted for fan complete with necessary 24/ O.2, Seven Only

3 core flexible wire with earthing.

Supplying & erecting Fan Hook of 10 mm M.S. Rupees Forty Three

218 1.00 Roundbar grouted in RCC slab with Making the Nos 43.43 And Paise Forty

site as original. Three Only

Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm Rupees One Hundred

219 1.00 length each side and pierced through a 16 Gauge Nos 108.07 Eight And Paise

M.S. box/ Heavy Duty PVC box complete erected Seven Only

concealed in Ceiling with necessary finishing..

Providing Fan clamp of 30 x 5 mm flat of

Rupees Ninety Eight

required length & 10 mm M.S. Bolt & Nuts

220 1.00 Nos 98.98 And Paise Ninety

erected with necessary hook of 10 mm M.S.

Providing 2.5mm. thick laminated acrylic sheet Rupees Eighteen And

to cover the fan hook or Fan box. Paise Eighteen Only

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

TABLE FANS, EXHAUST FANS & ACCESSORIES. Rupees One

Supplying & erecting approved make low noise Thousand Seven

222 5.00 decorative exhaust fan having size 200mm with Nos 1,703.87 Hundred Three And

1350 RPM with square frame ABS body with Paise Eighty Seven

inbuilt lowers & square frame. Only

Supplying & erecting single phase approved

make industrial exhaust fan suitable for medium Rupees Two

duty ring mounted low noise operation suitable Thousand Fifty Four

for medium duty having following dia size and And Paise Thirty Four

maximum speed in RPM Only

[A] 305 mm dia 900 RPM Cat II

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA polyester powder

coated and high U.V. & corrosion resistance with

diffuser and/ or Polycarbonate optics with

company mark/ name

120 to 300 V, Power Factor more than 0.9, THD < Rupees Three

10 %, Hundred Seventy

CCT 4000 K to 6500K, Uniformity ratio >0.7, Three And Paise

Luminaire efficiency> 85 lumens/ watt, Seventy Only

LED driver efficiency > 85 %

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/

SEOUL/ Bridgelux(U.S.A.) make LED used for

luminaire. (Each fitting required LM-79 & LM-80

(A) Tube Light with integral/ non-integral driver

(d) 22-24 Watts, Surge - 2KV, IP-20, 4 feet

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA polyester powder

coated and high U.V. & corrosion resistance with

diffuser and/ or Polycarbonate optics with

company mark/ name

120 to 300 V, Power Factor more than 0.9, THD < Rupees One

10 %, Thousand Three

225 40.00 CCT 4000 K to 6500K, Uniformity ratio >0.7, Nos 1,367.54 Hundred Sixty Seven

Luminaire efficiency> 85 lumens/ watt, And Paise Fifty Four

LED driver efficiency > 85 % Only

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/

SEOUL/ Bridgelux (U.S.A.) make LED used for

luminaire. (Each fitting required LM-79 & LM-80

Certificates) Square/ Circular Surface/ Recessed

Mounted Downlight/ Hanging with provision for

spring loaded mounting clips complete.

(F) Spot Light 425 Lumens, Surge-2KV (iii) (ii)

to 11 Watts Cat III

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA polyester powder

coated and high U.V. & corrosion resistance with

diffuser and/ or Polycarbonate optics with

company mark/ name

120 to 300 V, Power Factor more than 0.9, THD <

10 %, Rupees One

CCT 4000 K to 6500K, Uniformity ratio >0.7, Thousand Ninety

Luminaire efficiency> 85 lumens/ watt, Seven And Paise

LED driver efficiency > 85 % Eighty Seven Only

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/

SEOUL/ Bridgelux (U.S.A.) make LED used for

luminaire. (Each fitting required LM-79 & LM-80

Certificates) Square/ Circular Surface/ Recessed

Mounted Downlight/ Hanging with provision for

spring loaded mounting clips complete. (I)

Adjustable spot light with COB led having

aluminium reflector of following wattage (iii)

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA polyester powder

coated and high U.V. & corrosion resistance with

diffuser and/ or Polycarbonate optics with

company mark/ name

120 to 300 V, Power Factor more than 0.9, THD <

227 10.00 Nos 312.09 Hundred Twelve And

CCT 4000 K to 6500K, Uniformity ratio >0.7,

Paise Nine Only

Luminaire efficiency> 85 lumens/ watt,

LED driver efficiency > 85 %

CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/

SEOUL/ Bridgelux (U.S.A.) make LED used for

luminaire. (Each fitting required LM-79 & LM-80

(H) Mirror Light 9 Watts, wall mounted

minimum 1 feet long

Providing and erecting HOT deep Galvanised

228 5.00 Kg. 77.77 Seven And Paise

iron strip wire 8 to 16 S.W.G.

Seventy Seven Only

Providing and erecting Pipe type earthing with

40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

229 5.00 necessary coupling buch buried in specially Ea. 823.15

Three And Paise

prepared earth pit & G.I. earth wire of 8 SWG

erected & connected as directed (For panel)

Rupees One Hundred

For using salt and charcoal/ coke as required for

230 5.00 Ea. 171.70 Seventy One And

pipe type earthing.

Paise Seventy Only

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Supplying & erecting funnel type earthing having

earth plate of following size buried in specifically

prepared earth pit 3 mtr. below ground with

kg. charcoal and salt with alternate layers of

charcoal & salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised

231 2.00 Nos 7,874.97 Hundred Seventy

Iron/ copper earth wire No 6 SWG bolted with

lug to the plate and covered in 12 mm dia. G.I.

Ninety Seven Only

pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per

direction & duly tested by earth tester

confirming to ISS (As per drawing)with following

(C) with 60 x 60x 0.315 cms. Copper earth Plate

Providing & erecting water cooler having storage

capacity 150 Ltr. & cooling capacity 150 Ltr.per

hour @ an ambient temp of 45˚ C. The outlet

temp. of the water should drop by 15˚C within a Rupees Fifty Five

hour, The water cooler should be comprising of Thousand Eight

232 1.00 hermetically sealed compressor, fan motor, Ea. 55,893.40 Hundred Ninety

condensing unit, water tank surrounded by Three And Paise

evaporating, coil, thermostats, relay etc.complete Forty Only

with necessary inlet & outlet connection. The

body of water cooler will be made from Stainless

Supplying and erecting water filter cum purifier

with ultra violate technology. (Aquaguard/

233 1.00 Ea. 5,424.71 Hundred Twenty

waterdoc model or equivalent symphony/

crystal/ videocon model)

Seventy One Only

Providing and fixing approved make Conical

Poles (Standard) Made from CR sheet steel. The

pole should be made as per IS. and shall be Rupees Eight

coated with hot dip galvanizing as per IS 2629/ Thousand Seven

234 30.00 4759. with required base plate as erected on Ea. 8,756.70 Hundred Fifty Six

existing foundation. The length of poles are as And Paise Seventy

(D) 6 Mtr. Long 65mm Top X155 mm bottom dia,

Providing and fixing approved make Conical

Poles (Standard) Made from CR sheet steel. The

pole should be made as per IS. and shall be Rupees Twenty Three

coated with hot dip galvanizing as per IS 2629/ Thousand One

235 2.00 4759. with required base plate as erected on Ea. 23,162.33 Hundred Sixty Two

existing foundation. The length of poles are as And Paise Thirty

below. Three Only

(J) 12 Mtr. Long 70mm Top X250 mm bottom dia,

3mm thickness..

Providing M-20/ 1:2:4 cement concrete

foundation & 70 % PCC from bottom including

excavation for the pole of size 45 x 45 x 100 cms.

Deep in below ground level with plinth of 45 cms

236 20.00 Ea. 809.01 Hundred Nine And

x 45 cms (or 45 cms dia x 45 cms) high upper

ground level with necessary curing and finishing

in approved manner.

(for 4 & 6 mtr pole)

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Providing 1:2:4 cement concrete foundation &

70 % PCC from bottom including excavation for

the pole of size 90 x 90 x 180 cm. Deep in below

ground level with plinth of 45 cm x 45 cm(or

237 2.00 Ea. 2,209.88 Hundred Nine And

cm dia x 45 cm) high upper level ground cement

Paise Eighty Eight

concrete with necessary curing and finishing in

approved manner

[above 11 mtr & above poles]

STREET LIGHT BRACKETS.

Providing street light pole bracket consisting of

Light Class MS.pipe of 4.2 cms. outside dia.

complete with suitable M.S. sleeve tubing of

approximate 45 cms. and length suitable for

mm/ 80mm./ require size pole top having

Rupees Five Hundred

sufficient fastners for fixing the brackets and

238 10.00 Ea. 561.56 Sixty One And Paise

having spread of 1 mtr. length with suitable rise

as per site condition & suitable welded stiffener

reducer and nipple with check nut complete

painted with one coat of Red oxide/ PU base

primer and two coats of Aluminium/ PU paint.

paint with following nos of arms.

[A] Single Arm bracket 1 Mtr

STREET LIGHT BRACKETS.

Providing street light pole bracket consisting of

Light Class MS.pipe of 4.2 cms. outside dia.

complete with suitable M.S. sleeve tubing of

approximate 45 cms. and length suitable for

mm/ 80mm./ require size pole top having Rupees Seven

sufficient fastners for fixing the brackets and Hundred Fifty Eight

having spread of 1 mtr. length with suitable rise And Paise Fifty One

as per site condition & suitable welded stiffener Only

reducer and nipple with check nut complete

painted with one coat of Red oxide/ PU base

primer and two coats of Aluminium/ PU paint.

paint with following nos of arms.

[B] Double Arm Bracket 1 Mtr

STREET LIGHT BRACKETS.

Providing street light pole bracket consisting of

Light Class MS.pipe of 4.2 cms. outside dia.

complete with suitable M.S. sleeve tubing of

approximate 45 cms. and length suitable for

mm/ 80mm./ require size pole top having

sufficient fastners for fixing the brackets and

240 2.00 Ea. 1,144.33 Hundred Forty Four

having spread of 1 mtr. length with suitable rise

And Paise Thirty

as per site condition & suitable welded stiffener

reducer and nipple with check nut complete

painted with one coat of Red oxide/ PU base

primer and two coats of Aluminium/ PU paint.

paint with following nos of arms.

[D] Four Arm Bracket 1 Mtr

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Supplying and erecting LED street light/ Flood

light fittings with High power White LEDs

wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/ w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses with company

mark/ name engraved or embossed 120 to

V, Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K, Rupees Eight

Uniformity ratio >0.45, Luminaire efficacy> 100 Thousand Four

241 8.00 lumens/ watt. LED driver efficiency > 85 Ea. 8,453.70 Hundred Fifty Three

%.CREE/ OSRAM/ PHILIPS Lumileds/ NICHIA/ And Paise Seventy

SEOUL/ BridgeLux (U.S.A.) make LED used for Only

luminaire. (fittings required LM-79 & LM-80

certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge -4KV, Light must

have 440VAC line supply protection. It should

withstand 48 hours for 440VAC line supply (v)

above 120 to 160 watts

(c) LED Bollard fittings of minimum height

mm & dia.100mm having polycarbonate clear/ Rupees Four

milky diffuser mounted on 3mm thick aluminium Thousand Four

242 25.00 finished powder coated pipe with base plate Ea. 4,461.17 Hundred Sixty One

160x160mm with erection by M8x75mm fastner And Paise Seventeen

with required RCC foundation.IP65 for 9 to 20 Only

watt and above, surge-4kv cat-III

Supply Installation, testion and Comminssioning

of Hot Dip galvanised 8 mtr hieght pole as per

selection of Architect team, Decorative K-lite

Rupees Twenty Four

Pole with Bracket -Foundation, Integral Junction

243 40.00 Ea. 24,240.00 Thousand Two

box and MCB wire inside the pole provision, with

Hundred Forty Only

Pole foundation and J bolt and other assessories

to complete the installation.- Equvivalent to Klite -

Supply Installation, testion and Comminssioning

of 100 watt LED light fitting suitable for K-lite

mtr pole as per selection of Architect team, with Rupees Eight

Bracket and all necessary assesories to complete Thousand Eighty Only

the installtion inside the pole Equvivalent to Klite

Item No. Quantity Description of item Unit Rate in Total Amount

Item No. Quantity Description of item Unit Rate in Total Amount

Supplying and erecting LED street light/ Flood light

fittings with High power White LEDs wattage of

1Watt and above assembled on single MCPCB,

efficiency more than 130 lm/ w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses with company mark/ name engraved or

embossed 120 to 300 V, Power Factor more than

0.95, THD < 10 %, CCT 3000 K to 5700K, Rupees Three

Uniformity ratio >0.45, Luminaire efficacy>

lumens/ watt. LED driver efficiency > 85 %.CREE/

245 30.00 Ea. 3,345.12 Hundred Forty Five

OSRAM/ PHILIPS Lumileds/ NICHIA/ SEOUL/

BridgeLux (U.S.A.) make LED used for luminaire. And Paise Twelve

(fittings required LM-79 & LM-80 certificates)(NOTE: Only

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV

integral and, Light must have 440VAC line supply

with over-voltage protection.

(i) above 36 to 48 watts CAT III

Rupees Eight Crore Forty Seven Lakh(s) Forty Five Thousand Fifty Two And Paise Fifty Eight Only

I/ We am/ are willing to carry out the work at …………………% above/ below percent (should be written in figures

……………………………………………………) of the estimated rates mentoined above. Amount of my/ our tender work out as under.

Estimate amount: Estimate amount:

Put to tender Rs. Put to tender Rs.

Deduct:…………….% below Rs.………………………………….. Add………………..% above Rs…………………………………..

Note - 1 All work shall be carried out as per Public Works Department Handbook and other specifications of Division or as directed.

GM\W v! AW]\ H SFD AF\WSFD lJEFUGL 5]l:TSF VG[ l0lJhGGL ALHL BF; lJUT D]HA VYJF ;}RGF 5|DF6[ SZL VF5JFG]\ ZC[X[P

All the columns is Schedule should be filled in ink and the total of the entries in the last column should be struck by the

contractor under his signature.

GM\W v Z VG];}lRDF\ AWF BFGFGL lJUTM ;CLYL EZJL VG[ K[<, F BFGFGL GM\WMGM ;ZJF/ M SZL SMg8=FS8Z[ 5MTFGL ;CL

Rates quoted include clearance of site (prior commencement of work and at its close) in all respects and hold good for work

under all conditions, site, moisture, weather etc.

8F\S[, F NZDF\4:Y/ GL sSFDGF VFZ\E[ VG[ 5}~ YFI T[ JBT[f NZ[S ZLT[ ;FO;}OL SZJFGM ;DFJ[X YFI K[P VG[ T[ NZ

TDFD 5lZl:YlT4:Y/ 4 E[H4 CJFDFG JU[Z[ C[9/ SFD DF8[ VD, DF\ ZC[X[P

Note - 4 To be continued on additional sheets, if found necessary

GM\Wv$ H~Z H6FI JWFZFGF SFU/ M HM0L RF, ]\ ZFBJ]\P

(1) All works shall be carried out as per the General Technical Specification Booklet of Building and other specifications of

Division as directed.

(2) The contractor shall exhibit a board as per Government Circular No. Vernacular TNC/ 1090/ 24/ S dated 05.03.2011 with

details specifications and details of works and amount involved at site at his own cost as directed by Engineer-in-charge.

Note - 5 (3) 1.00 % of Construction cost shall be deducted from Bill. Amount of Contract as per the building and other Construction

worker's welfare cess Act - 1996 (Labor & Employment Department Letter No. CWA - 2004 - 1831 - M (3). Dt. 9-12-05,

Notification of Labor & Employment Department Date 03-01-05 and Labor & Employment Department letter No. CWA/ 2004-

(4)The Contractor is Solely responsible to bare all applicable taxes excluding GST, department will pay GST extra.

Signature of Contractor with Seal