REPAIR AND MAINT OF EXTERNAL CI DI GI PIPE LINES MOTOR AND PUMP SETS STP CLEANING OF UG OH SUMP AND MISC CONNECTED ITEMS AT A A BANAR UNDER GE BANAR

Amount

Material and labour for GI tubing 'medium grade' of size 15 mm bore with all fittings such as sockets, bends, unions, tee, short pieces, flange and nipples, complete all as per IS 1239 (part-I) laid in trenches/floors/fixed to walls and ceilings including taking down old unsv GI/CPVC/UPVC pipe complete all as specified :- Note : - (i) All fitting, joint, flange hook/clamp and welding work is deemed to be included in above quoted rates (ii) Excavation, earth work shall be measured and paid separately under respective items of schedule.

All item as per Ser No 1.00 above but of size 20 mm bore

All item as per Ser No 1.00 above but of size 25 mm bore

All item as per Ser No 1.00 above but of size 50 mm bore

All item as per Ser No 1.00 above but of size 80 mm bore

All item as per Ser No 1.00 above but of size 100 mm bore

Material and labour for 3- layer PP-R (Polypropylene random copolymer) of size 20 mm concealed pipes SDR 7.4(PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply with all PP-R plain & brass threaded polypropylene random fittings laid in trenches/floors/fixed to walls and ceilings including taking down old unsv GI/CPVC/PVC pipe complete all as specified :- Note : - (i) All PP-R fitting, is deemed to be included in above quoted rates (ii) Excavation, earth work shall be measured and paid separately under respective items of schedule.

Supply, laying, jointing, testing and commmisioning of DI Pipe of size 100 mm bore as per IS 8329, class K-9 with inside cement mortar lining with spigot and socket end with fittings/specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps, tyton joint and plugs laid in trenches including taking down old unsv CI/DI/UPVC/GI pipe complete all as specified and as directed by Engr-in-charge : Note : - (i) Tyton joint is deemed to be included in above quoted rates. (ii) Excavation, earth work and all fittings shall be measured and paid separately under respective items of schedule.

All item as per Ser No 8.00 above but of size 150 mm bore

All item as per Ser No 8.00 above but of size 200 mm bore

All item as per Ser No 8.00 above but of size 250 mm bore

Supply, laying, jointing, welding & testing MS Pipe (Heavy duty class 'C') size of 100 mm bore with flange end laid in trenches/floors for suction and delivery line or in any situation including taking down old unsv MS pipe complete all as specified. Note : - (i) The charges for all fitting, joint, flange hook/clamp and welding work is deemed to be included in above quoted rates (ii) Excavation, earth work shall be measured and paid separately under respective items of schedule.

All item as per Ser No 12.00 above but of size 150 mm bore

All item as per Ser No 12.00 above but of size 200 mm bore

Excavation in trenches not exceding 1.5M vide and n. exe 1.5 M in depth for laying of pipes etc. and getting out in any type of soil complete all as specified.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type soil complete all as specified.

Removing excavated material n. exc 50M and deposting where directed at a level n. exc 1.5M above the starting point in any type of soil complete all as specified.

M&L for Cutting the road / hard standings and excavating in trenches not exceding 0.50 mtr wide and not exc 0.80 mtr deep across the road for laying of pipe line size up to 300 mm including making good the excavated portion by means of PCC 1:2:4, type B1 using 20mm graded stone aggregate complete and matching with the surroundings complete all as specified.

Material and labour for cement concrete type B-2 mix 1:2:4 using 40 mm graded stone aggregate as in flooring, finished even and smooth using extra cement for grouting of foundation bolts of motor etc complete all as specified. Note : Rates are deemed to include earth work for demolition of concrete and removal of bolts.

Supply, fixing & testing Cast Iron Sluice Valve size of 80 mm bore ISI Marked, flanged ends drilled pressure rating PN-1.6, PD Short body, confirming to IS 14846 -2000, having stainless steel spindle with cast iron operation wheel at top including taking out unsv sluice valve complete all as specified.

All item as per Ser No 20.00 above but of size 100 mm bore

All item as per Ser No 20.00 above but of size 150 mm bore

All item as per Ser No 20.00 above but of size 200 mm bore

Supply, fixing & testing butterfly valve (wafer type) of size 50 mm bore, ISI Marked, stainless steel rust and corrosion free,flanged ends drilled pressure rating PN-1.0, including taking out unsv butterfly valvee complete all as specified.

All item as per Ser No 24.00 above but of size 80 mm bore

All item as per Ser No 24.00 above but of size 100 mm bore

All item as per Ser No 24.00 above but of size 150 mm bore

All item as per Ser No 24.00 above but of size 200 mm bore

Supply & fixing of Cast iron foot valve flanged End Synthetic Rubber Coated (Reinforced) Ball of size 80 mm bore including taking out unsv foot valves complete all as specified.

All item as per Ser No 29.00 above but of size 100 mm bore

Supply & fixing Cast iron Non Return valve flanged end PN 1.6 of size 80 mm bore including taking out unsv NRV complete all as specified.

All item as per Ser No 31.00 above but of size 100 mm bore

Supply and fixing in replacement of Air release valve,80 mm size complete all as specified.

Supply & fixing brass ball valve with steel handle, inlet/outlet connection socket type for iron pipe ISI Marked, as per IS: 778 of size 15 mm bore including taking out unsv gate valves complete all as specified.

All item as per Ser No 34.00 above but of size 20 mm bore

All item as per Ser No 34.00 above but of size 25 mm bore

All item as per Ser No 34.00 above but of size 50 mm bore

Supply & fixing PTMT float valves high pressure with polythene float and fly nut, screwed for iron pipe, GI pipe tank connection fitting complete,of size 20 mm including taking out unsv float valve complete all as specified.

M&L for Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for iron pipe and fixed 15mm dia pipe complete all as specified.

Supply & fixing DI fittings for flanged /spigot and socket pipes end specials such as Tees, bends (any type, radius and angle) tapers any type, collars, tail pieces, caps and plugs of size up to 250 mm bore confirming to IS: 9523 complete all as specified.

Supply & fixing Lead wool as per sample complete all as specified.

Supply and fixing spun yarn as per sample complete all as specified.

Cutting existing cast iron pipes and reducing to required length in position for insertion of new tees, branches etc of size up to 300 mm bore complete all as specified.

Material and labour for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed 20 mm dia complete all as specified.

Material and labour for Straight plain brass ferrules (or connecting screws) screwed both ends and fixed 25 mm dia complete all as specified.

Supply and fix in replacement of long collar Dett Joint suitable for 80-100 mm bore CI/DI pipe incl rubber rings and nut bolts and washers complete all as specified.

All item as per Ser No 46.00 above but suitable for 150-200 mm bore

Supply & fixing in replacement of GI Socket of size 15 mm to 25 mm Med grade ISI Marked

Supply & fixing in replacement of GI Elbow of size 15 mm to 25 mm Med grade ISI Marked

Supply & fixing in replacement of GI Union of size 15 mm to 25 mm Med Grade, ISI marked

Supply & fixing in replacement of GI Nipple of 4/6'' length as per requirement, both end screwed Medium Grade of suitable for GI pipe of size 15 mm to 25 mm , ISI marked

Supply & fixing in replacement of GI Reducing of size 25x15, 20x15, 25x20, 25x15 mm socket medium grade ISI marked

Supply & fixing in replacement of GI Tee of size 20x20x15, 20x20x20, 25x25x25, 25x25x20 mm Med grade ISI Marked

Supply & fixing in replacement of GI solid plug of size 15 to 25 mm heavy duty ISI marked

Supply, laying, jointing, testing in replacement of UPVC pipe 150 mm dia (SCH-40) with pressure class 10kg/cm^2 including fitting complete all as specified. Note : - All fitting joint, is deemed to be included in above quoted rates

All item as per Ser No 55.00 above but of size 100 mm dia

Dismantling the existing broken valve pit cover and re-construct of brick masonry wall pit size 120cm x 120cm x 100cm internal dimension suitable for 80/100/150 mm dia pipe including excavation and earth work and disposal of soil, plastering internally and flush pointing to brick surface externally as the work proceeds complete with 3.15mm thick MS sheet cover angle iron frame 40x40x6mm and locking arrangement and painting with two coats of black bitumenous paint over a coat of red oxide primer complete all as specified.

M&L for attending to break down of water supply pipe line of size up to 200 mm CI/DI/MS/GI bursting/cracks including removal of broken pipe pieces up to 1 mtr lengths through gas cutting/manual cutting as per site requirement including burning the defective tyton joint/lead joints and removing out the damaged CI/DI/MS/GI pipe and inserting necessary specials such as DI/CI collar, MS Clamp, tyton joint etc. as required at site and providing of new lead joints/tyton joint/D Joint/MS Clamp as required at site, including testing for the leakages complete all as specified. NOTE: 1) The earth work involved for excavation, returning filling & removal of soil is deemed to be included inquoted rates. 2) Welding / plumbing works involved for repairing of pipe lines up to 1 mtr and necessary T&P like welding machine, threeding dise etc including man power is deemed to be included in quoted rates. 3) Transportation charges for shifting of T&P etc is deemed to be included in above quoted rates.

M & L for servicing of Sluice valve of 80 to 250 mm by removing gland and packing, valve set cover, metal filling and grinding valve set, inspecting, oiling, greasing spindle, check nut assembly, removing gate from valve seat and applying grease on the seat, reassembling the valve, appling grease on spindle trust plate easy operation and fixing new gland packing and applying one coat of black colour paint over one coat of primer complete all as specified.

M&L for Surface excavation n.exc 30 cm deep and averaging 15 cm and geeting out in any type of soil incl cutting and removing grass, vegetation, bushes/shrubs etc from surrounding of water supply installation/STP installation complete all as specified directed by Engineer-in-charge

M&L for dismantling, disconnecting and decoupling of 30 HP Electric Motor and transportation to civil work shop for opening of motor and taking out the burnt winding wire complete and cleaning the slots, rewinding the motor with super enamalled copper winding wire of existing gauge including all other insulating material and greasing of mechanical switch gear incl replacement of bearing of suitable size, oil seal, packing kit, fan blade with casing , terminal box and terminal connection plate etc and transportation from civil work shop to site for refixing , coupling, alignment of Motor with pump using steel/rubber coupling and testing of Motor complete all as specified. NOTE:- Spare parts and copper winding are deemed to be included in above quoted rates.

All item as per Ser No 61.00 above but of motor capacity 10-20 HP

All item as per Ser No 61.00 above but of motor capacity 5 - 7.5 HP

M&L for dismantling, disconnecting and decoupling of 30 HP pump and transportation to civil work shop for opening of pump and cleaning of all parts internally & externally and greasing of mechanical switch gear incl replacing the unserviceable spare parts like CI Impeller with key, Impeller nut, CI Casing wear ring DE/NDE, CI Gland plate, CI Gland sleeves, ball bearing DE/NDE, CI coupling, SS Eye bolt with nut, CI Shaft sleeve, Gasket packing,remetalling of pump shaft turning and balancing, including machining work and transportation from civil work shop to site for refixing , coupling, alignment of pump with motor and testing of pump set complete all as specified. Note:- (i) Spare parts are deemed to be included in above quoted rates.

All item as per Ser No 64.00 above but of Pump capacity 10-20 HP

All item as per Ser No 64.00 above but of Pump capacity 5 - 7.5 HP

M & L for lowering up of sumbersible Pump set of cap 1-2 HP and transportation to civil work shop for opening of motor and taking down/out the burnt winding wire cleaning the slots. rewinding the motor with super enamelled copper winding wire of existing gauge, weight etc, repairing the same by replacing the unserviceable parts like bearing bush, rotar sleeve, water seal and cable seal, sand guard etc machine work and transportation from civil work shop to site for refixing and testing of Motor complete all as specified. Note :- Spare part and copper winding are deemed to be included in above quoted rates.

Supply and fixing in existing panel of fully automatic soft starter advance range class 10 in line, PSTX30-600-70, code 1SFA898103R7000, operational current 30 A three phase controlled, operational voltage 208 - 600 V, control supply voltage 100-250V 50 Hz, detachable keypad rated IP66 (4X outdoor), build in bypass for energy saving and easy installation,, analog output for measurement of current, voltage, power factor, coated circuit board protection from dust moist and corrosive atmosphere and all control wiring connection including taking out unsv star delta starter complete all as specified.

Supply and fixing in replacement of control transformer Copper wound, CRNO core, screwless terminals, Bottom mount, Input voltage – 440VAC, Output voltage – 220VAC, Output current – 0.9 Amp, VA Rating – 100VA complete all as specified.

Supply, installation, testing & commissioning of high torque motorize valve of size 80 mm with gears and adopters self Lubricating Type, Weather proof with protection against, over voltage,short circuit ,Jamming of valve and over current protection with manual by-pass arrangement to open/Close the valve on power failure operated on 230 V single phase, 50 Hz AC supply including taking down the existing old unserviceable sluice/butterfly valve incl nuts, bolts, washers, rubber sheet etc all as directed at site comprising of the following :- (a) Designed line pressure 10 kg/sq cm. (b) Operating angle; - 90 degree (c) Disc Material :- CI with nylon coating (d) Valve type :-Butterfly with geared motor on top

All item as per Ser No 70.00 above but of valve size 100 mm

All item as per Ser No 70.00 above but of valve size 150 mm

Cleaning of RCC OH reservoir capacity of 8000-15000 Gallon at 60 feet staging by pumping out the accumulated water at the bottom using submersible pump,removing the complete slit by suction process using either suction pump or vacuum process, cleaning the walls, ceilling & floor using high pressure water jet with pressure up to 2300 PSI to dislodge all the mud,dirt,algea,fungus and layers of calcinations,vacuum cleaning to remove the dislodged waste using industrial vacuum cleaner, spraying anti- bacterial agent/ food contact sanitizers to walls,celling & floor of tank to make it sterile to take care of any futher suspend bacteria,viruses which might have remained in the tank complete with out disturbing the water supply to area applying one coat of white wash to entire tank as taking out after cleaning and deposting to a distance upto 50 Mtr from the starting point all as directed by the Engr-in-Charge including writing the date of cleaning of OH tank on external wall of OH reservoir at appropriate location with 4 inch (100mm) sizes in capital letter by using synthetic enameled paint of white colour on black painted surface of suitable size complete all as specified.

All item as per Ser No 73.00 above but 33,300 gallon capacity at 60 feet staging

All item as per Ser No 73.00 above but 50,000 gallon capacity at 60 feet staging

All item as per Ser No 73.00 above but1,00,000 gallon capacity at 60 feet staging

All item as per Ser No 73.00 above but RCC UG sump capacity of 5000 to15,000 gallon

All item as per Ser No 73.00 above but RCC UG sump capacity of 22000-30,000 gallon

All item as per Ser No 73.00 above but RCC UG sump capacity of 40000 - 50,000 gallon

All item as per Ser No 73.00 above but RCC UG sump capacity of 75,000 -80,000 gallon

All item as per Ser No 73.00 above but RCC UG sump capacity of 100000 gallon

Supply, installation and testing in replacement flanged ended analog type water meter (ISI Marked) Class 'B' of size 200 mm dia bore (8") making good connection with flanged ends, with gasket rubber sheet and nut & bolts fixing in horizontal/inclined/vertical position, compelet all as specified.

All item as per Ser No 82.00 above but meter of size 150 mm dia bore (6")

M&L in replacement of 20 ft heigh aluminium ladder of thickness 1.5mm Nos of steps 15 Nos of overall weight not less than 15Kg, having load capacity of 150 kg of dimension 92.8x49.1x9.1CM including fixing with RCC wall of UG sump/OHT complete all as specified.

M&L for colour code painting to GI/ MS/DI tubing size up to 200 mm including fittings applying two coats of super enameled paint grey/sky blue/existing colour over a coat of red oxide primer after preparation of existing surface complete all as specified.

Supply & fixing in replacement of submersible pump set 2 HP single phase with starter

M&L for servicing of motor pump set up to 30 HP after opening of non driving end motor fan cover, cleaning of outer body of motor/pump set, NDE fan and greasing of bearing at both side of motor & pump set incl spray painting (colour as per existing) of motor pumpset & foundation channel, gland packing of suitable size and tightening of foundation nut/bolt, power cable terminations complete all as specified. Note : - (i) Grease and painting work is deemed to be included in above quoted rates. (ii) Gland packing and copper lugs shall be measured and paid separately under respective items of schedule.

M&L for Gland packing soft type with lead wool metallic lined superior quality as per sample of size 10/12mm complete all as specified.

Supply and fixing copper lugs suitable for copper cable size up to 25 sqmm

Supply & replacement of Aviation obstruction light LED type including mounting arreagement complete all as specified.

Supply and fix on wall /cable tray or lay in trenches in replacement of XLPE cable , PVC sheathed and XLPE insulated armoured copper conductor eight core and size 1.5 sqmm, connecting , testing complete incl fixing on wall of OHT/ UG sump/ pump house using clits/ saddle clamps through PVC conduit complete all as specified.

Supply and fix on wall /cable tray or lay in trenches in replacement of XLPE cable , PVC sheathed and XLPE insulated unarmoured copper conductor two core and size 1.5 sqmm, connecting , testing complete incl fixing on wall of OHT/ UG sump/ pump house using clits/ saddle clamps through PVC conduit complete all as specified.

Supply and lay in replacement of unarmoured PVC insulated multistranded Copper conductor three core of size 10 sqmm complete all as specified.

M & L for lowering up of sewage sumbersible pumping set 5.5 HP and transportation to civil work shop for opening of motor and taking down/out the burnt winding wire cleaning the slots. rewinding the motor with super enamelled copper winding wire of existing gauge, weight etc, repairing the same by replacing the unserviceable parts like bearing bush, rotar sleeve, water seal and cable seal, sand guard, Sealing ring, Flange upper/lower with stud and nut, Seal bush, Thrust plate, Stainless Steel coupling,remetling of rotar end turning and making key way, balancing of rotar, Rotar sleeve turning and grinding,T-Bolt with nut, LNK Bolt Stainless Steel, Submersible cable jointing, G.M Impeller, CI NRV Body, Impeller Key, Stainless Steel Pump shaft single stage, Remetling of G.M Impeller and turning including machine work and transportation from civil work shop to site for refixing and testing of Motor complete all as specified. Note :-Spare parts and copper winding is deemed to be included in above quoted rates.

Prevantive maintenance of air blower after disconnecting the inlet/outlet pipe and dismantling from the mounting platform foundation of air blower installed at sewage treatment plant incl transportation to workshop to fro (if required), air Blower assembly consisting of twin lobe rotary blower and motor coupled by V Belt of capacity 7.5 HP complete for replacement of dry bag type suction air filter,bearing, oil seal,V Velt No FK 548, high Tensile Bolts, nuts, washers etc duly greasing all fits of various component and refixing, reconnecting the same at site and testing.

Material and Labour in replacement of gear oil of grade SAE 90/SERVO

Material and Labour for cleaning of Sewage of Equalization tank of storage capacity upto 67 CUM at STP and Removing of settle down Sewage sludge cum mud/De-Silting etc complete all as specified.

Material and Labour for cleaning of Oil grease chamber tank of storage capacity upto 5 cum, MBBR I & II of storage capacity upto 60 cum , Tube settler Tank of storage capacity upto 30 cum, chlorine contact tank of storage capacity upto 12 cum, treated water tank of storage capacity upto 20 cum and sludge bed tank of storage capacity of 5 CUM thoroughly by removing mud, grits etc from the tank complete. Note for 102 and 103 :-(i) Cleaning inner surface of tank complete by scraping with steel wire brush and and removing mud and sludge collected inside the tank manually at a distance not exceeding 50 mtr complete all as specified. (ii) Washing with clean water and bleaching powder mixture throughly complete tank internally and removel of left out sludge if any at site at a distance not exceeding 50mtr complete all as specified.

M&L floting MBBR FAB media out of vergin PP, UV sterlized, of MBBR based sewage treatment plant complete all as specified.

Material & Labour for fine river sand incl filling and punning in sludge drying beds of STP complete all as specified.

M&L for replacement of nylon net (anti bird net) with connected items suitable for window/door of OH Tank/ vents pipe of UG Sump complete all as specified.

Material and Labour for replacement existing u/s foundation MS bolt with nuts and washers of various sizes complete all as specified.

S&F rolled mild steel as in framing for cladding, glazing and the like fixed with angles cleast and connecting plates etc and frame work such as grills,grating, ladder, base plate and similer work conforming to Fe.290Gde-E-165 complete all as specified.

M&L in replacement of mechanical type water level indicator for over head tank/semi under ground sump by float control system (i.e rope change, painting work, writing in water figures) embeded with wall/pillar/PCC blocks including fixing, standing arrangement complete all as specified.

Supply and installation, testing and commissioning in replacement of LT panel factory made suitable for 415 Volts ,3 Phase 4 Wire, 50 Hz AC supply system confirming to IS:8623/93, outdoor type, double door floor mounting weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 3.15 mm thick having Aluminium bus bar of rating 300 Amp three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. All the covers shall be provided with suitable door locking arrangements, mounted on angle iron stand fixed at 75 cm height made out of angle size 50 X 50 X 6 mm grouted in PCC 1:3:6, and comprising of the following controls gears (Note: (i) The size of Feeder pillar box should not be less than 1200x1350x450mm, (ii) Drawing of LT Panel shall be submitted by manufacturer before placing order and will be approved by GE. INCOMING:-(i) MCCB 4 Pole 415 Volts thermal adjustable type 36 KA 160 Amp rating -01 Nos (ii) Control transformer Copper wound, CRNO core, screwless terminals, Bottom mount, Input voltage – 440VAC, Output voltage – 220VAC, Output current – 0.9 Amp, VA Rating – 100VA-01 Nos -01 Nos (iii) Digital type volt meter & Amp Meter-01 Nos (iv) LED type Indicating Lamp - 3 Nos OUTGOING :- (i) MCCB 3 Pole 415 Volts fixed type 16 KA 63 Amp rating -03 Nos, (ii) MCB TPN 415 Volt 10 KA 'B' Curve 63 Amp -03 Nos (iii) SPN 40 Amp 'B' curve -02 No (iv) fully automatic soft starter advance range class 10 in line, PSTX30-600-70, code 1SFA898103R7000, operational current 30 A three phase controlled, operational voltage 208 - 600 V, control supply voltage 100-250V 50 Hz, detachable keypad rated IP66 (4X outdoor), build in bypass for energy saving and easy installation, analog output for measurement of current, voltage, power factor, coated circuit board protection from dust moist and corrosive atmosphere - 03 Nos (v) DOL Starter suitable for 3 phase 2 HP Motor with relay having Phase failure, Phase inbalance, Phase reversal ,Short Circuit Protection Through MCB-02 Nos (vii) Push button incl control wiring-10 Nos

Supply and installation, testing and commissioning in replacement of LT panel factory made suitable for 415 Volts ,3 Phase 4 Wire, 50 Hz AC supply system confirming to IS:8623/93, outdoor type, double door floor mounting weather proof, vermin proof, fully ventilated and fabricated out of MS CRCA sheet of 3.15 mm thick having Aluminium bus bar of rating 200 Amp three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. All the covers shall be provided with suitable door locking arrangements, mounted on angle iron stand fixed at 75 cm height made out of angle size 50 X 50 X 6 mm grouted in PCC 1:3:6, and comprising of the following controls gears (Note: (i) The size of Feeder pillar box should not be less than 1200x1350x450mm, (ii) Drawing of LT Panel shall be submitted by manufacturer before placing order and will be approved by GE. INCOMING:- (i) MCCB 4 Pole 415 Volts thermal adjustable type 25 KA 125 Amp rating -01 Nos (ii) Control transformer Copper wound, CRNO core, screwless terminals, Bottom mount, Input voltage – 440VAC, Output voltage – 220VAC, Output current – 0.9 Amp, VA Rating – 100VA-01 Nos (iv) Digital type volt meter & Amp Meter-01 Nos (v) LED type Indicating Lamp - 3 Nos OUTGOING :- (i) MCCB 3 Pole 415 Volts fixed type 16 KA 63 Amp rating -02 Nos, (ii) MCB TPN 415 Volt 10 KA 'B' Curve 63 Amp -01 Nos (iii) SPN 40 Amp 'B' curve -01 No (iv) fully automatic soft starter advance range class 10 in line, PSTX30-600-70, code 1SFA898103R7000, operational current 30 A three phase controlled, operational voltage 208 - 600 V, control supply voltage 100-250V 50 Hz, detachable keypad rated IP66 (4X outdoor), build in bypass for energy saving and easy installation,, analog output for measurement of current, voltage, power factor, coated circuit board protection from dust moist and corrosive atmosphere - 02 Nos (v) Push button incl control wiring-04 Nos

M&L in replacement of earthing with Galvanised Steel earthplate of size 60x60cmx6mm thick electrode and 32x6mm GI strip as earth lead, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to 32x6mm earth strip by means of nuts, bolts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I, Rates inclusive of neccessary excavation in any type of soil, earth work, PCC pit, Pit cover, funnel with watering pipe, GI Strip up to 7.5 Mtr complete all as specified.

M&L in replacement of GI strip of size 32x6 mm including mounting on PVC/Porcelain insulators on wall and burried in ground complete all as specified.

M/s Vishaka Enterprises (BID ID -3332534)

Shri Electrical Enterprises (BID ID -3339820)

GITANSH ENGINEERS AND COMPANY (BID ID -3339556)