Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹9.1 Cr
EMD Value
₹18.3 L
Closing Date
3 Dec 2026, 10:30 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of "V/N" or 'V' which ever is less, where V= Advertised value of the tender in crores of Rupees N= Number ofyears prescribed for completion ofwork for which bids have been invited. The average annual contractual tumover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, tho audited balance sheet of the fourth previous year shall be considered for calculating average annual bontractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Civil Engineering works involving construction of Industrial workshop inside factory premises with fabrication, supply and erection PEB of 90T and structural steel of 277.50 T with pile foundation.
32 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
SPECIAL CONDITION FOR GST-•The details of supply of Goods & Services are subject to GST rules applicable with effect from 01.07.2017.
Special Conditions for GST-All the Tenderers are requested to submit their "GSTIN" registration numbers at the time of tendering or at the time of submitting their invoice without which, payment will not be made.
The materials should be supplied as per the approved make list mentioned in the tender document
(A) Proposed covering of Open Gantry area between G-Shed and H-Shed (2500Sqm Shed) with crane and Construction of Lean to Roof in Western side of G shed and Eastern side of H Shed in Shell Factory (B) Construction of 1125 sq.m stores shed inside shell factory (C) Provision of lift facility at AWTI (Civil works)
2026377212387~ICF
2026377212387
Open
Works - General
12 Months
Chennai, Tamil Nadu
₹0
₹18.3 L
7 Nov 2026
7 Nov 2026
19 Nov 2026
252 items across 15 schedules · ₹9,13,62,884.45 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 140 | 286.85 | 40,159 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 100 | 253.95 | 25,395 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 15 | 2,161.2 | 32,418 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 115 | 6,833.4 | 7,85,841 |
| 5 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 15 | 6,670.25 | 1,00,053.75 |
| 6 | Foundations, footings, bases for columns | Sqm | 50 | 307.95 | 15,397.5 |
| 7 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 130 | 307.95 | 40,033.5 |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 160 | 608.35 | 97,336 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 20 | 804.25 | 16,085 |
| 10 | Encasing rolled steel sections, in beams and columns, with cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) including centering and shuttering complete but , excluding cost of reinforcement. | cum | 25 | 14,191.95 | 3,54,798.75 |
| 11 | Extra for providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages, excluding cost of hangers. | Sqm | 120 | 448.8 | 53,856 |
| 12 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 180 | 8,683.8 | 15,63,084 |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 10 | 10,306.2 | 1,03,062 |
| 14 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 306 | 688.45 | 2,10,665.7 |
| 15 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 15 | 6,658.25 | 99,873.75 |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 100 | 8,288.35 | 8,28,835 |
| 17 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 1000 | 197.7 | 1,97,700 |
| 18 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 10 | 7,958.65 | 79,586.5 |
| 19 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 250 | 163.65 | 40,912.5 |
| 20 | 1:4 (1 cement: 4 fine sand) | Sqm | 1100 | 294.85 | 3,24,335 |
| 21 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 1100 | 97.6 | 1,07,360 |
| 22 | Two or more coats on new work | Sqm | 125 | 131.45 | 16,431.25 |
| 23 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 5 | 2,007.1 | 10,035.5 |
| 24 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 5 | 2,928.1 | 14,640.5 |
| 25 | In cement mortar | cum | 20 | 1,698.45 | 33,969 |
| 26 | Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. | Sqm | 20 | 62.5 | 1,250 |
| 27 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 150 | 219.35 | 32,902.5 |
| 28 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. | cum | 100 | 2,803.65 | 2,80,365 |
| 29 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 380 | 531.8 | 2,02,084 |
| 30 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 88 | 1,019.8 | 89,742.4 |
| 31 | Upto 5mm depth and 5 mm width | Metre | 200 | 85.25 | 17,050 |
| Schedule total | ₹58,15,258.1 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Additionalsafetyaspects.pdf
ATTACHMENT
Conservancycharges.pdf
ATTACHMENT
JPOfortemporaryelectricalpowersupply.pdf
ATTACHMENT
Approvedlist.pdf
ATTACHMENT
GCC2022_merged1_compressed1.pdf
ATTACHMENT
jpo_1.pdf
ATTACHMENT
Completebiddocument.pdf
ATTACHMENT
scopeofwork-shed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .