GENERAL BN Peringamala Maintenance of Drying Yard Maintenance of Drying Yard near office Building

Amount

Repair and maintenance of drying yard

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD3018/2025-2026:Providing and fixing Welded wire mesh of 50x50mm of weight not less than 2.0 kg per sqm to GI frames etc. including cost of welding rod plant and mechinaries etc. complete

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

OD3017/2025-2026:supplying and fixing aluminum channel Zig Zag spring and necessary screws

OD3015/2025-2026:supply and laying insect proof net of 40 mesh for sufficient to cover all vents of the structure

OD3014/2025-2026:Providing 50 to 75% green or black shade net

OD3016/2025-2026:Providing 200 micron 5-layer UV stabilized polyethylene sheet

OD3107/2025-2026:Providing and fixing 60 cm wide fibre sheet gutter with bolts, nuts and washers etc., including making necessary connections of approved make and quality all complete as per the directioins of engineer in charge

VIVEK N S (BID ID -2429302)

AJEESH KUMAR N (BID ID -2432671)

Bidder Name

NAZEEM LAL A S

AJEESH KUMAR N

VIVEK N S