Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Not Admitted-Fee/PreQual/Technical/Finance PLOT NO 102 H NO 21 1382 102 GROUND FLOOOR SAMATHA NAGAR COLONY OLD SAFILGUDA ROAD NO 3 HYDERABAD RANGAREDDI TELANGANA 500056 | HYDERABAD | TELANGANA | 500056 | Not Admitted-Fee/PreQual/Technical/Finance Others-Hard copies of documents and EMD not received. |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
28 Mar 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Dy Chief Engineer Q PH CMS EM
Civil Maintenance section Nuclear Fuel Complex Hyderabad 500062
Civil and other allied works for construction of store and toilet block inside NZFP Nursery at NFC, HYD.
2023_NFC_745482_1
M/541/2023
Open Tender
Civil Works
Item Rate
180 days
NFC, HYDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹0
₹86,000
Yes
29 Mar 2023
17 Mar 2023
29 Mar 2023
17 Mar 2023
28 Mar 2023
17 Mar 2023
17 Mar 2023 - 21 Mar 2023
Amount
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with manufactured/robo sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
Reinforced Cement Concrete by insitu mixing using Weigh Batching or RMC of Ultra Tech, Birla Ready Mix of Grade M - 25 up to specified level using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with manufactured/robo sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork as specified and directed. at all levels.
Providing centring and shuttering with steel / playwood strutting, propping, stagging made out of steel Cup and Lock System with steel channels under floors etc., and removal of the same as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying One (1) coat of shuttering oil (Cemol/Fosroc make/any other approved equivalent) on all shuttering surfaces coming in contact with concrete and providing required cover blocks on suttering surfaces as specified in drawing, etc., as specified and directed. at all above and bleow FFL.
Supply, fabrication, erection and fixing in position Reinforcement bars for Reinforced Cement Concrete items at and at all depths and heights below and above plinth level with High Yield Strength Deformed (HYSD) bars/TMT Bars 500D conforming to IS 1786 (Latest Edition) from approved source of make of M/s. Tata, Vizag Steel, SAIL, Jindal including transporting to site, loading and unloading, decoiling, straightening, cutting using guarded circular saw, bending reinforcement using machine only, making fan hooks of required shape, dowels for bonding masonry, removing of scales, fixing bars with chairs, space bars wherever required, fixing and tying in position with Two (2) strings of 18 Gauge soft drawn annealed MS binding wire inclusive of its supply, etc., complete as specified and directed.
230 mm thick Brick work as per IS 2212 using clay bricks as specified with cement mortar 1:6 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) 6 River Sand} at all depths below/ Above plinth levels in Foundations, Plinth, Storm Water Drains wall in super structure etc., including raking out joints and simultanously flush pointing the joints with the same mortar for the faces covered with earth , curing etc., complete as specified and directed.
HALF BRICK masonry as per IS 2212 using bricks as specified in partitions walls in cement mortar 1:4 (1 cement: 4 river sand), including scaffolding, raking out joints, curing etc. complete and with Reinforced Cement Concrete (RCC) M15 (1:2:4) stiffeners of depth 75mm at every 900 mm height including form work, curing etc., complete as specified and directed, but excluding reinforcement. Note: Reinforcement will be measured and paid for separately under relevant item of schedule.
Cement plastering 12mm thick for Ceiling with Cement Mortar 1:4 ( 1 cement: 4 river sand) finished smooth at and at all heights above plinth level on concrete surfaces including making necessary grooves in between junctions, preparation of surfaces, hacking of concrete surfaces, steel/ tubular scaffolding, curing, etc., complete as specified and directed.
Cement plastering 15mm thick for internal walls with Cement Mortar 1:4 ( 1 cement: 4 river sand) finished smooth at and at all heights above / below plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surfaces, preparation of surfaces, hacking of concrete surfaces, steel/ tubular scaffolding, curing, etc., complete as specified and directed.
Sand faced plaster 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level upto a height of 10.00 m with base coat in Cement Mortar 1:4 (1 cement:4 river sand), 12mm thick and finishing coat in Cement Mortar 1:3(1 cement:3 river sand), 8mm thick final rendering including addition of approved integrated waterproofing compound @ 2% by weight of cement or as per manufacturer’s Specifications for the base coat of make M/s. Fosroc/Demech/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT/Sunanda Chemicals, making necessary grooves, bands, drip moulds, etc., as required, double steel/tubular scaffolding wherever necessary, hacking of concrete surfaces, curing, etc., complete as specified and directed.
Supplying and applying minimum 2mm thickness in two coats of white cement based putty of approved brand like M/s. Birla/MYK at and at all heights above plinth level including preparation of surfaces, steel /tubular scaffolding, curing, etc., complete as specified and directed.
Distemper on newly plastered unpainted surfaces with Two (2) finishing coats of Synthetic Oil Bound Washable Distemper of make M/s. Asian Paints, Pidilite, Johnson & Nickelson, Nerolac, Berger, approved shade over One (1) coat of approved compatible cement primer at all heights above plinth level including preparing the surfaces, filling with approved putty wherever required, steel/tubular scaffolding, cleaning, etc., complete as specified and directed.
Painting exterior newly sand faced plastered surfaces with Two (2) finishing coats of Anti fungus and Acrylic Emulsion paint of exterior quality having 100% acrylic Apex Ultima of make M/s. Asian Paints, Pidilite, Johnson & Nickelson, Nerolac, Berger of approved shade including preparing the surfaces, filling the cracks with external crack filler/putty of M/s. Birla or its approved equivalent wherever required, applying One (1) coat of approved primer as per manufacturer's Specifications, curing, scaffolding, cleaning, etc., complete as specified and directed.
Two coats of synthetic enamel paint over a coat of zinc chromate primer/ Wood primer as required on diffrerent surfaces of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger complete including materials and labour all as directed and specified by engineer in charge.
Water proof cement plaster of 40 mm thick over terrace in cement mortar 1:3 with approved integrated water proofing compound @ 2% by weight of cement, of M/s. Fosroc/ Demach/ Huntsman/ Pedilite/ SIKA Quaalcrete/ MBT as per manufacturer's specifications, scaffolding, curing, hacking the concrete sufaces if necessary, etc., complete as directed for roofs and chajjas etc.
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers on well prepared surface and compacting with sutable vibrator roller achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.
Vitrified tiles of size 600mm X 600mm for floor and skirting etc., using 9/6 mm thick tiles of 1st quality, non-skid, matt finish and non slipperry of make Spartek, Regency, Johnson, Somani or any other approved equivalent of required shade, design, colour and pattern laid on 20mm thick cement mortar in proportion 1:5 (1 cement: 5 river sand) for flooring / 15 mm thick cement mortar in proportion 1:3 (1 cement : 3 river sand) for skirting including cleaning, close jointed and pointed with matching colour tile jointing grout, finished to levels,slope or plumb as required including cutting of tiles, acid washing, removing and reinstating the loose and cracked tiles surfaces etc., complete as specified and directed.
Non-Skid Ceramic tile flooring/skirting/dado, using 9/6 mm thick ceramic tiles of sizes as mentioned below, glossy/matt finish, of 1st quality (Spartek, Regency, Johnson, Somani, Nitco, Khazaria) of required shade, edge cut, design, colour and pattern laid on 20mm thick cement mortar in proportion 1:5 (1 cement: 5 coarse river sand) for flooring / 15 mm thick cement mortar in proportion 1:3 (1 cement : 3coarse river sand) for skirting /dado, close jointed and pointed with matching colour adhesive, finished to levels, slope or plumb as required including cutting of tiles, curing, acid washing, etc., complete as specified and directed
Flooring Using tiles not less than Size 300X600X6mm
Dado Using tiles not less than Size 300X600X6mm
Providing wood work with CP teakwood in frames for doors using II class teakwood as per IS 4021 at all heights above plinth level, wrought framed and fixed in position including providing and fixing with suitable size coach screws wherever required / M.S. hold fasts of size 40 mm x 3 mm and 200 mm long, bent to shape embedded in cement concrete 1:2:4 blocks for door frames, fixed in position with necessary lugs rawl plugs /screws/coach screws, applying one coat of approved wood primer to the exposed surfaces of door frame and two coats of bituminous paint to the surfaces of frames in contact with masonry/concrete, etc., complete generally as shown in drawings, etc., complete as specified and directed.
Providing and fixing in position 35 mm thick single leaf flush door shutters of solid block board core as per IS 2202 at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and with commercial ply finish on both faces providing and fixing under pressure with approved type adhesive, 200 x 150 mm laminated sheet on both sides where mortice lock is fixed , fixing hinges supplied under relevant item to shutter and frame and applying one coat of approved wood primer and two coats of Synthetic enamel paint generally as shown in drawings, etc., complete and as specified and directed.
Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension size 48x40 mm (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge
24 mm thick factory made uPVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H'section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. Including Screws , plugs, complete as directed by EIC.
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
Supplying and fixing to wooden/aluminium doors etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as specified and directed.
a) 150 MM long, 10 MM Shoot
b) 250 MM long, 10 MM Shoot
c) Baby Latches
Supplying and Fixing to wooden doors at all heights above plinth level proved 4 lever mortise locks to suit single shutters of Godrej make or approved valent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortise lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as specified and directed.
Supplying and Fixing to wooden/aluminium doors at and at all heights above plinth level approved best quality anodized extruded aluminium door stoppers with rubber cushion of ‘Classic’/JYOTHI make or approved equivalent, with approved cadmium plated brass screws of appropriate size, etc., complete as specified and directed.
Supplying and fixing to wooden doors at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 150 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, with SDR 11 (Class 1) having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Internal work etc. complete testing the pipes with clean water as per specifications
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
110 mm dia
Providing and fixing uPVC pipes & fittings for soil and waste drainage of catgeory Type B and conforming to IS 13592 & IS 14735 respectively , for all depths/heights, correct grade, levels and alignment of following sizes and make M/s Ashirvad/Supreme or equivalent ,jointing with solvent weld or pushfit type for the building drainage system as per manufacturer specifications etc. and as specified and directed.
75 mm n.b. pipes
110 mm n.b. pipes
Providing and fixing in position best salt glazed STONE-WARE GULLY TRAP 150x150 mm square inlet and 100 mm n.b. outlet conforming to IS:651 including embedding the trap in 1:3:6 cement concrete, 150mm x 150 mm C.I. grating at top, construction of brick masonry chamber 300 mm x 300 mm(internal) in 230 mm thick brick masonry in CM 1:6 over cement concrete of 150 mm thick bed of 1:3:6 embedding the trap, plastering with cement mortar 1:4, 20 mm thick on inside, outside and all exposed faces finished with a floating coat of neat cement, providing and fixing C.I. frame and cover weighing not less than 7 kgs, painting the grating, frame and cover with 2 coats of approved bitumastic paint etc. complete.
Construction of rectangular CHAMBERS of internal clear dimension as mentioned below in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:3:6 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of double seal pattern of size 610mmx610mm of weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing C.I. steps weighing not less than 3 ½ kg each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 1200 mm. However minimum depth of chamber not less than 450mm
Providing and fixing as per IS 2064, approved ORRISA PATTERN W.C. SUITE comprising a) Orissa patterns W.C. manufactured by M/s. Hindware, parryware, cera or any approved equivalent, light coloured glazed vitreous chinaware conforming to IS 2556- Part 3, 580 mmx440 mm with ‘P’ or ‘S’ trap. b) PVC low level flushing cistern of 10 lts. Capacity manufactured by M/s. Hindware, parryware, cera or any approved equivalent light coloured conforming to IS: 7231 with all internal PVC fittings mounted on a pair of suitable brackets with 32 mm nb PVC bend of required length, overflow pipe etc., complete. c) 32 mm nb PVC flush pipe of appropriate length with all fittings synthetic adhesive cement jointed concealed in wall. d) 15 mm n.b. heavy quality PVC inlet connection with CP brass unions at ends e) 15 mm n.b. screw down heavy quality C.P. brass stopcock conforming to IS: 781. f) Any other component required to make assembly etc., complete as specified and directed.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
(European type) with seat and lid, 10 litre low level white vitreous flush tank.
Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of Sintex or its equivalent make with suitable SMC cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow etc., complete as specified and directed.
Providing and fixing 110 mm dia un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock.
Providing and fixing heavy quality fancy variety C.P. brass screw down BIB TAPS of M/S. Jaguar/M/s Hindware /Essco/Metro make conforming to IS: 8931 on G.I. lines- size 15 mm for WCs.
Providing and fixing heavy quality C.P. brass screw down STOP COCKS of M/S. Jaguar/M/s Hindware /Essco/Metro make conforming to IS:8931 on G.I. lines of size 15 mm for shower.
Constructing brick masonry chamber in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x600mm up to depth of 900 mm
SUPER CARE GARDENS
SRI SHIVA SAI ASSOCIATES
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .