Providing and installation of 100 Nos. handpump in Nahan Constituency in Tehsil Nahan Distt. Sirmour HP

Discharge 0.65 lps at TOTAL head of 50 m

Discharge 0.65 lps at TOTAL head of 120 m

Steel tower for elevated PVC Tank 7.50 mtr. height along with foundation in cement concrete:- "Steel work welded in built up section trusses and framed work for Fabrication of Steel tower for elevated PVC Tank 7.50 m height including cutting hoisting fixing in position and applying a priming coat of red oxide, framed guard bars, ladders, railing, brackets, complete with entering & Locking Arrangements to the tank and similar work including all leads lifts as per the direction of Engineer-in-charge.

Fabrication & erection of pipe tower withdismantled pipe ( issued free of cost by department) for elevated PVC Tank 7.50 m height in position by cutting, welding with MS felets in position and applying a priming coat of red oxide, framed guard bars, ladders, railing, brackets, complete with entering & Locking Arrangements to the tank and similar work including all leads lifts as per the direction of Engineer-in-charge.

Excavation in foundation and trenches etc.in earth work in all kinds of soil such as pick work ,jumper work decomposed conglomerate saturated soil soft and hard rock up to all leads lifts stacking the excavated soil not more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm layers when required in to plinth sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with in all leads lifts and as per directions of the Engineer-in charge.

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded stone agg.40mm nominal size) and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.

Providing and laying cement concrete 1:2:4(1cement:2sand:4 graded stone agg.20mm nominal size) and curing complete excluding the cost of form work in foundation & plinth including all leads lifts and carriage of material and as per the directions of Engineer-in-charge.

"DISTRIBUTION SYSTEM Excavation in drains and channels etc. in earth work in all kinds of soil such as pick work,jumper work ,blasting work decomposed conglomerate saturated soil soft rock and hard rock including dressing of sides and beds and preparation of sub grade to level or slope including refilling the trenches and disposing of surplus earth up to all leads lifts disposed earth to be levelled and neatly dressed including jungle clearance and as per direction of Engineer-in-charge.

Laying, jointing ,testing& commissioning in trenches following dia socketed galvanised mild steel tube of various dia of light grade as under confirming to BIS: 1239- (Part-I) 1990 or latest with up to date amendments , capable of withstanding required test pressure as BIS Code, in random lengths of 5.5 to 6.5 mtr. The pipe ends shall be socketed , Tees & bends shall be manufactured from parental pipe a/w all necessary fittings etc. and cutting of pipes wherever required as per site requirement as per site conditions including carriage in all leads & lifts and as per direction of Engineer in charge.((earth work in trenches to be measured and paid for separately)

25 mm dia (L)

32 mm dia (L)

Providing & fixing MS Clamp for house connection from GI Pipe (25mm dia to 40 mm dia) including welding a nipple of 15 mm dia GI pipe providing suitable orifice on the delivery pipe with rubber gasket , nut bolts including all leads lifts and carriage of material as directed by the Engineer-in-Charge.

Providing &fixing BrassBib Tap of15 mm dia (L) (Superior quality) accessories like fittings, union, nipple, elbow,tee,plane nipplecomplete in all respect. including all leads lifts and carriage of material as directed by the Engineer-in-Charge.

lowering of HDPE pipe of 32 mm dia (OD) for column pipe in borewell/ hand pump complete with all fittings, fixtures etc with in alllead’s lifts and carriage of material as directed by the Engineer-in-Charge.

Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or Steel pins etc. as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid for separately)

Providing fixing and MS welded wire mess of 25X25 mm size ( 3-5 Kg/Sqm ) to steel structure with a coat of primer red oxide complete in all respect including all leads lifts and carriage of material as directed by the Engineer-in-Charge.

Providing from work with steel sheets 3.15mm thick welded with angle iron 30x30 x5 mm so as to give rough finish i/c centring shuttering and proppping etc. with wooden bettens and ballies height of popping and centring below supporting floor to not exceeding 4 mtrs and removal of the same for insitu RCC work and PCC work i/c all leads ,lifts etc. ( Vertical Surface )

P/F of Brass full way valve 25 mm dia

P/F of Brass full way valve of 32 mm dia

Providing & fixing of PVC Tank of 2000 Litre cap. Confirming to Is 12701-1996 7.50 Mtr. Staging .