Special repair of Eye OT building at Zonal Hospital Mandi District Mandi H.P. (SH - Providing and fixing steel work, pre-painted steel sheet and corrugated G.S. sheet roofing work etcetera) Deposit work

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetra as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.

Providing 0.63 mm (zero point sixty three millimetre) thick with zinc coating not less than 275 gm/m² (two hundred seventy five gram per squaremetre) corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm (eight millimetre) diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete with all accesoriees as required including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing and fixing 0.60mm (zero point sixty millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing 0.63 mm (zero point sixty three millimetre) thick with zinc coating not less than 275 gm/m² (two hundred seventy five gram per squaremetre) ridges or hips of width 60 cm (sixty centimetre) overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia (eight millimetre diametre) G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Providing 1.60mm (one point six zero millimetre) thick with zinc coating not less than 350 gm/m² (three hundred fifty gram per squaremetre) valleys of 90 cm (ninety centimetre) wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia (eight millimetre diametre) G.I. limpet and bitumen washers complete with all accesoriees as required including carriage of material within all leads, lifts and other incidental charges complete in all respect as per direction and satisfaction of Engineer-in-Charge.

Repairs to plaster of thickness 12 mm (twelve millimetre) to 20 mm (twenty millimetre) in patches of area 2.5 (two point five) squaremeters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, with cement mortar 1:4 (one cement : four fine sand) including carriage of material within all leads and lifts and other incidentals complete and as per the entire direction and satisfaction of Engineer-in-Charge.

Applying priming coat with readymixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including carriage of material within all leads, lifts and other incidental charges and as per the entire satisfaction and direction of Engineer-in-Charge.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution complete in all respect including carriage of materials within all leads and lifts as per direction and satisfaction of Engineer-in-Charge.