Repair/maint to certain Bldg in Baddowal and Moga under AGE B/R Baddowal, GE Ludhiana

Amount

Demolition of cement concrete in ground floors and pavings not excceding 15cm thickness (above or below ground level) complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tile not exc. 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement complete all as specified and directed .

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed .

M&L 50 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

M&L coloured chequered cement concrete tiles 30cm x30cm x 25 mm thick, set, jointed and pointed in neat cement slury with grey cement and pigment in floors over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed .

M&L for Roughening surfaces of old concrete floor including picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed .

M&L Endura ceramic tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed .

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base finished even and fair without using extra cement including necessary form work complete all as specified and directed .

M&L 75 mm thick PCC as in plinth protection/apron type C-1, 1:3:6 (20 mm graded crushed stone aggregate) finishing cement surfaces even and smooth complete all as specified and directed .

M&L for machine cut kota stone slab flooring 18-20 mm thick laid over and including screed bed 20 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed .

M&L for machine cut kota stone slab 18 to 20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick screed bed in CM (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed .

Taking down chowkat with shutter (without taking off shutter from frame) exc. 1.5 sqm but n.exc. 4 sqm each complete all as specified and directed .

Taking down chowkat with shutter (without taking off shutter from frame) n.exc.1.5 sqm each complete all as specified and directed .

Taking down shutter exc. 1 sqm but n.exc. 2 sqm each and remove from site complete all as specified and directed .

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed .

S&F pressed steel frames for doors with one/more rebated incl necessary fixing lugs hinges lock strike plate etc complete of size 125x60mm complete all as specified and directed . Sheet thickness 1.25mm.

S&F pressed steel frames for doors with one/more rebated including necessary fixing lugs hinges lock strike plate etc compl size 105x60mm complete all as specified and directed . Sheet thickness 1.25mm.

M&L cement concrete 1:3:6 type CO (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed .

M & L for 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed .

S&F factory made 2nd class hardwood plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated complete all as specified and directed .

M&L for Box type steel window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4, type B-1, complete all as specified and directed . (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.

All as per item No 24 above but fixing with wire mesh complete all as specified and directed .

M&L framed mild steel work conforming to Fe-290 gde Fe-165 as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works complete all as specified and directed .

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of size 150 mm long complete all as specified and directed .

S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed .

S&F 300 mm long ordinary rat tail rod pattren spring including roller and roller plate complete (Mild steel) complete all as specified and directed .

S&F Aluminium handle Extruded aluminium alloy handles fabricated type anodised of size 150 mm long complete all as specified and directed .

M&L for two coat of synthetic enamel paint over a coat pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and directed .

Hacking out old broken glass (any thickness, size, quality or description) from wooden /metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed .

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 sqm in each pane complete all as specified and directed .

M&L for preparing of newly steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed .

S&F in repairs galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed .

S&F in repairs door closer cast copper iron body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete complete all as specified and directed .

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches pillars,etc, but excluding ashlar facings dressed stonework and precast concrete articles complete all as specified and directed . .

M&L brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed .

All as per item No 39 above item but except brick complete all as specified and directed (Old bricks shall be reused).

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and directed .

M&L rendering 15mm thick on fair face of brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed .

M&L rendering 5mm thick on fair face of ceiling surface in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed .

M&L Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), type B0, 1:2:4 (12.5 mm graded crushed stone aggregate) set in CM 1:4 including all mouldings,pillars and frame including taking down old louver and jallies complete all as specified and directed .

M&L for preparing newly plastered or pointed surface of wall and precast cement concrete louvres, jallies and applying two coats of cement base paint complete all as specified and directed .

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed .

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distempering of wall with distemper oil emulison (any tint) complete all as specified and directed .

M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls complete all as specified and directed .

S&F Sheet glass 5.5mm, ordinary quality and glazing with oil putty in square exc. 0.5 sqm in each pane complete all as specified and directed .

Dismantling brick tiles or terracing tiles, single layers on roof complete all as specified and directed .

Demolition mud phuska in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed .

M&L 10mm thick screed bed or bedding layer in cement mortar (1:3) mixed with water proofing compound on roof slab and finishing the surface finished even and smooth without using extra cement complete all as specified and directed. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate average thickness 50mm as in roof padding including mixing water proofing compound (Dr. Fixit) or equivalent make specified in Appx 'B' as per manufacturers instruction complete all as specified and directed . Note. water proofing liquid shall be measured and paid seperately)

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced application including applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm including cleaning surfaces complete all as specified and directed.

M & L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed .

M & L 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on mud phuska but except tile after cleaning and removing old mortar from bricks including all extra handling and removal and disposing off rubbish complete all as specified and directed .complete all as specified and directed.

Supply only Integral water proofing compound ISI marked as approved complete all as specified and directed .

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed .

S&F in repairs 19/20mm dia Harrison rail, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed .

S&F rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank including dismantling water tanks of capacity 500 ltr and removing to store and S&F Brass ball valves 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking down steel water tubing of 15 mm bore including connection & removal to store complete all as specified and directed .

Taking down steel water tubing of 20 mm bore including connection & removal to store complete all as specified and directed .

S&F Mild steel GI tubing 15 mm bore medium weight fixed to walls complete all as specified and directed .

S&F Mild steel GI tubing 20 mm bore medium weight fixed to walls complete all as specified and directed .

Refixing old steel tubing and connections in new or old position (wall, ceiling , floors etc) 15mm bore complete all as specified and directed .

Refixing old steel tubing and connections in new or old position (wall, ceiling , floors ,etc) 20mm bore complete all as specified and directed .

Supply and fix in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl 410mmx 330mmx 160mm complete all as specified and directed.

S&F in repairs vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mm excluding taps, including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper, brackets for fixing any size, including cutting for and pinning in ends of brackets or erecting stand fixed in repairs complete all as specified and directed

S&F in repairs Pillar taps, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed .

S&F PVC connection 15 mm dia with PTMT nuts of length 450 mm complete all as specified and directed .

S&F in repairs Bib cock 15mm with flange, chrome plated fancy type fixed as in repair complete all as specified and directed .

S&F in repairs Angular/ stop cock 15mm with wall flange chrome plated fancy type, fixed in repairs complete all as specified and directed .

S&F in repairs Concealed stop cock, 15mm chrome plated fancy type long shank and cup complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed .

S&F Grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed . .

S&F PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls including Dismantling of CI soil waste and rain water pipe complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed .

S&F PVC 75 mm (SWR) bends any radius complete all as specified and directed .

Disconnecting existing water tanks for repairs, cleaning and removing all scale and dirt etc from tanks, and from mouth of circulating pipes etc and reconnecting in same position of capacity exc. 250 ltrs and not exc. 500 ltrs each etc complete all as specified and directed .

Supply and fix in repair 10 ltrs capacity PVC symphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed .

JAI DURGA CONSTRUCTION COMPANY (BID ID -3399568)

M/S Satguru enterprises (BID ID -3392724)

PK ENTERPRISES (BID ID -3399878)

M/S Shyam kumar mehta and co (BID ID -3400474)