Anti-erosion measures to protect Singirbond area from the erosion of river Borak on its L/B.

Amount

Cutting bamboo , uprooting roots & stumps including removing them from the site of work, etc. complete as directed.

Preparation of stack yard of boulder/metal etc. including cutting light jungles and removing the same to a safe distance, leveling the ground , filling up depressions etc. complete as directed

Construction of temporrary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart driven at atleast 0.75 m below ground and height above plint 2.5m. Split Jatti bamboo wall mud plastering white washing 2 coats, 10 cm thick touch roofing over bamboo rua frame placing at 0.15 m clear apart fitted with bamboo kamies from binding doors and windows with Bamboo Chattai strengthening with Bamboo frame binding with wire etc compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

Supply of Geo-textile bags of type-A (size 1.03X0.70M), inner dimension made of Geo-textile non-woven fabric sheets of 400 GSM manufactured from 100% virgin Polypropylene (PP) fibre having thickness not less than 3.00 mm with minimum properties as (i) Tensile strength (CD) ≥ 24 KN/m (ii) Tensile strength (MD) ≥ 22 KN/m (iii) Mass ≥ 400.00 Gm/m ² (iv) CBR Puncture strength ≥ 4100 N/m2 (v) Elongation @ break (Warp) ≥ 54% (vi) Elongation @ break (Weft)≥ 52% (vii) Abrasion ≥ 70 % (viii) UV Resistance @ 500 hours ≥ 70% (ix) AOS ≤ 75 micron (x) Permittivity ≥ 1.25, (xi) Trapezoidal Tear Strength ≤ 520 N (xii) Permeability = 45Lt/m2/sec (xiii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHATI

Carriage of Geo Bag of size 1.03X0.70 m including loading and unloading, stacking, cost of POL etc. complete and including hire charge of truck with driver and handyman, complete as directed. { Distance from Guwahati to Silchar is 400.00 KM, For 1 bag / 1 km = Rs. = 0.013 ,For 1 bag / 400 km = Rs. = 5.20}

Supplying of Galv. wire netting sheets of size 2.57 X 1.67 m made of 8 G wire of 152mm Sq. mesh including 76 mm projection of each wire on all side beyond the net size of 2.42m x1.51 mm including labour charge for loading, unloading, stacking cost of P.O.L. and all taxes etc. complete as directed . ( weight of each sheet not less than 6.30kg)

Carriage of wire netting sheets of size 2.57 X 1.67 m made of 8 G wire of 152mm Sq. mesh including loading & unloading, stacking, cost of POL , etc complete and including hire charge of truck with driver and handyman complete as directed. {Distance from store to site is 20.00 KM ,For 1 sheet / 1 km = Rs. = 0.34, For 1 sheet / 20 km = Rs. = 6.80}

Filling and laying in cage with sand filled Geo bags of size 1.03m X 0.70m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly. in cages made of wire netting sheets of size 2.57x1.66m of 8G galvanized wire making the cage from 2 nos. of wire netting sheet by tying the projected wires complete as directed. (Geo Bag, Wire Netting Sheets and Polypropylene thread will be supplied by the department free of cost). Without Boat at (LWL)

Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) With Boat (loose dumping in appron)

Filling and laying of Geo bags of size 1.03m X 0.70m including excavation of sand from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt having minimum weighing 126.00 Kg and minimum volume 0.084 cum after filling ,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle double stitched machine, stacking the same in batches of 100, carrying the same to the dumping site including all handling charges and local carriage within a distance of 150m and laying properly as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without Boat (in pitching)

Supply of Sewing Thread/Yarn PPMF Stitching Thread (2000 Den. Kaplon) i/c payment of taxes.

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12 KN/m (ii) Mass ≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5 KN (iv) Elongation at break ≥ 60% (v) Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥ 70% (vii) AOS ≤ 75 micron (ix) Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤ 340 N (xi) Permeability = 2.00 x 10 ̄ ³ m/sec (xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) FOR GUWAHATI

Carriage of 300 GSM Geo-sheet of including loading and unloading, stacking, cost of POL etc. complete and including hire charge of truck with driver and handyman complete as directed. {Distance from Guwahati to Silchar is 400.00 KM For 1 bag / 1 km = Rs. = 0.013, For 1 bag / 400 km = Rs. = 5.20}

Labour charge for laying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed.

Excavation of drainage channel to the proper grade and slopes as required including desposing the excavated debris/soil to a safe distance of beyond 100 m distance as directed. Wet & Sticky Soil, For lead up to 30m and all lifts

Labour charge for making filter bed of required thickness with stone metal of size 13mm to 38mm over the trimmed surface of river bank/embankment., slope, including site carriage of metal within a distance of 150m etc. complete as directed

Collection and supply of brick bats 10-40mm size to work site including loading, unloading transportation and stacking in measurable stacks including sale tax, compensation if any, etc. complete as directed

Local carriage of brick bats, boulder, metal, gravel/sand etc. from the approachable site beyond 150m and up to 3.00Km from the work site including loading from stack and unloading at work site with 10 (ten) ton capacity truck, supplying P.O.L. etc. complete as directed.

Labour charge for laying of brick bats, broken stone metal, sand gravel etc. on approach road including ramming dressing the seat and local carriage of materials up to a distance of 60 m complete as directed.

Earth work in embankment by truck carriage in ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and stacking in regular measurable stacks at suitable places including clearing and levelling the stacking site, breaking clods up to 2.5cm cube, payment of forest royalty if any, etc. ( 12.50 % deduction will be made from measured quantities on account of shrinkage)for initial teaa nd 10 Km and up to'12-00 Km and for all lifts (stack meas.)

Spreading of earth stacks over the crest and slope of embankment and places as directed in uniform layer of 22 cm. thick including breaking clods, dressing, ramming etc. complete where necessary including dressing the embankment. before complete as directed

Turfing with grass sods of largest possible rectangles of 12 cm. minimum thickness placed closely including dressing earth pagging with Jati bamboo split, watering till the grass grows for a lead up to 90m and all lifts.

Collection & supply of river gravel & shingles of size 20mm to 40mm in average including necessary carriage and stacking in regular measurable stacks at quarry site, payment of forest royalty, monopoly, etc (Spreading of stacks over the crest of embankment and places as directed in uniform layer including breaking clods, dressing, ramming and lolling with smooth wheel roller 80-100 km in stages to proper grade and camber applying and booming, stone Screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification complete where necessary including dressing the embankment. Before complete as directed)

Earthwork in bank trimming to the designed section /slope including removing the soils at a safe distance, complete as directed.

Earth work in embankment by truck carriage in ordinary/normal soil excluding sandy and rocky soil free from roots & vegetation and filling in uniform layers not exceeding 22cm. thick including ploughing or roughening or benching the seats, removing all debries, breaking clods up to 2.5cm cube, dressing as per design section including payment of forest royalty if any, etc. complete as directed. (10% deduction will be made from the section measured quantities of the completed and compacted on account of shrinkage) For initial lead beyond 10 Km and up to 12.00 Km and for all lifts (sect. meas)

Labour for ramming with cast iron to proper compection including watering if necessary, etc complete as directed, ordinary soil (manual ramming)

Supply of R.C.C. Porcupine member of size 0.10m × 0.10m × 3.00m with cement concrete proportion 1 :2:4, reinforced by 4 Nos. of 8mm dia TMT bar. and 4mm dia (8G) wire stirrups at 15cm. C/C with 2 (two) nos of holes of 20mm dia at 50 cm inside from both sides in the same face and in the other face of member another 2 (two) nos. of holes of size 20mm dia at 65 cm inside from both ends including properly curing for 28 days and supply at specified stackyard complete as directed.

Local Carriage of Porcupine members by Diesel truck of 10 MT capacity including loading at stack yard and un loading at river bank up to an average lead of 10.00 Km and all lift, complete as directed. {Distance from stack yard to site is 15.00 KM, For 10 km = Rs. = 27.65, For 15 km = Rs. = (27.65x15)/10 = 41.47

Labour charge for launching of R.C.C. / PSC Porcupine including carriage of R.C.C./ PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m) Launching by boat:

Manufacturing, supplying and fixing retro reflective sign boards of size 1.22m X 0.76 m made up of 4 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC: 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 nos of 900 mm thick pipe vertical post (AISI 202 Grade) of length 3750 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmx30cmx30cm etc.complete. and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical post to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-Charge.

MOINUL HOQUE-AASIF ALTAF LASKAR JV