REPAIR/ POLISH/ PAINTING TO VARIOUS STEEL/WOODEN/ MAP FURNITURE AT BARRACKPORE UNDER GE BARRACKPORE

Amount

REPAIRS TO CHARPOY IP HARD TOP (DRG NO: FD/MAP-II/01) SRL ITEM NO. 1 &2:- TOP Removing of old unserviceable top from its existing position and replace the same with new top of 12 mm thick BWR grade both sides commercial plywood (seven Nos of ply) complete all as shown on drawing as directed by Engineer-in-Charge.

PAINTINGS OF CHARPOY IP HARD TOP M & L for applying spray painting two coats with Black paint by spray gun after removing of existing old worn out paint by any means with proper treatment from Charpoy IP hard top complete all as directed shown drawings.

REPAIRS OF TABLE BED SIDE {DRG NO : FD/E6/MAP/15(R)} SRL ITEM NO. 3 TO 7:- TOP Removing decayed top from its existing position and replace the same with new 18/19mm thick Prelaminated Particle board (exterior grade), grade-I quality, prelaminated one side with decorative choice lamination & other side balancing white lamination. Standard PVC edging 1.6mm whick shall be provided all-around the top of table bed side all as shown on drawing.

BACK Removing decayed each back of table bed side from its existing position and replace the same with new back made out from 6mm thick plywood (five Nos of ply), type BB, BWR grade of required size all as shown on drawing.

DRAWER Removing decayed drawer and replace the drawer made out from 12mm thick prelaminated particle board (exterior grade), grade-I quality, one side decorative of front, side and back, bottom shall be made out from 6mm thick plywood (five Nos. of ply), type BB, BWR grade of required size as approved by Engineer-in-Charge and rest all as shown on drawing.

HANDLE S & F for 100mm aluminium handle of existing pattern after removing of old unserviceable / broken handle from its existing position complete all as directed and shown on drawing.

HARD RUBBER / PVC RING Removing of each decayed hard rubber / pvc ring from its existing position of Table bed side and replace the same with new hard rubber / pvc ring all as shown on drawing and directed by Engineer-in-Charge.

REPAIRS TO CHAIR VERANDAH (DRG NO.FD/MAP-II/06) SRL ITEM NOS. 8 TO 11:- SEAT Removing of old unserviceable PVC seat from from its existing position and replace the same with new PVC seat 4mm thick and grooves 90X10mm 10 Nos on seat.

BACK Removing of old unserviceable PVC back from from its existing position and replace the same with new PVC back 4mm thick.

HARD RUBBER Removing of old hard rubber unserviceable hard rubber from from its existing position and replace the same with new hard rubber all as shown on drawing.

PAINTINGS OF CHAIR VERANDAH M&L after removing of existing old worn out paint by any means with proper treatment from chair verandah and applying spray painting two coats with synthetiic enamel white paint over a coat of red oxide primer complete all as dircted and shown on drawings.

REPAIRS TO CHAIR DINING FOR THE FOLLOWING (DRG NO : FD-MAP-II/05) SRL ITEM NOS. 12 TO 20:- FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak/Seasam) all as shown on drawing.

REAR LEG Removing each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak / Seasam) al as shown drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

REAR STIFFENER Removing of each decayed rear stiffener from its existing position and replace the same with new rear stiffener made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

HARD RUBBER / PVC RING Removing of each decayed hard rubber / PVC ring from its existing position of Chair dinning and replace the sme with new hard rubber / PVC ring all as shown on drawing and directed by Engineer-in-Charge.

SEAT Removing of decayed / wornout PVC seat from its existing position and replace the same with new seat of size 4mm x 10mm thick ribs molded long with single frame all as show on drawing and directed by Engineer-in-Charge.

POLISHING TO CHAIR DINING Removal of old existing worn out polish from exposed portion of wooden surface by any meand of chair dining including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking, numbering) and apply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engineer-in-Charge.

REPAIRS TO TABLE DINING (1200X900)MM FOR THE FOLLOWING (DRG NO : FD/MAO-II/03) SRL ITEM NOS. 21 TO 23:- TOP Removing of decayed top from its existing position and rreplace the same with new top made out from 18/19mm thick prelaminated particle board (exterior grade), Grade-I quality, prelaminated one side with decorative choice lamination and other side balancing white lamination with 6mm thick and well seasoned 1st class hard wood (Teak / Seasam) beading all-round the edging complete all as shown on drawing and as directed by Engineer-in-Charge.

HARD RUBBER / PVC RING Removing of each decayed hard rubber / toe from its existing position of table dining and replace the same with new hard rubber / PVC toe 25mm and 25mm high all as shown on drawing and directed by Engineer-in-Charge.

POLISHING TO TABLE DINING (1200X900)MM Removal of old existing worn out polish from exposed portion of wooden surface by any means of table dining including preparation of ew wooden members by sand papering and making the furniture completely smooth for further new polishing (including scoring out all previous marking,numbering) and appply polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engineer-in-Charge.

REPAIRS TO CHARPOY FOLDING IP HARD TOP (DRG NO.FD/388(R) SRL ITEM NOS. 24 TO 25:- TOP Removing of old unserviceable top from its existing position and replace the same with new top made out of 8mm thick BWR Phenoled commercial plywood (un-polished) cut into two pieces to facilitate folding of bed all as shown on drawing.

FLAT IRON Removing of old unserviceableflat iron from its existing position and replace the same with new MS flat iron of size 220mmx60mmx32mm cut to shape and bent @ 150 to avoid fouling with leg all as shown on drawing.

REPAIRS TO COMPUTER CHAIR / REVOLVING CHAIR WITH ARMS (DRG NO - TP & FD/E6/MAP/01) SRL ITEM NOS. 26 TO 31 WHEEL Removing of old unserviceable revolving wheel from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with revolving wheel PVC 40mm.to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

HYDRAULIC SYSTEM Removing of old unserviceable hydraulic system from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new hydraulic system to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

BASE Removing of old unserviceable base from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new base to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

SEAT Removing of old unserviceable seat from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new seat to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

BACK Removing of old unserviceable back from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new back to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

ARMS Removing of old unserviceablearms from its existing position of computer chair and revolving chair and replace the same by supplying and fixing with new arms to make completely functional rest all as shown on drawing or directed by Engineer-in-charge.

PAINTING OF LOCKER STEEL (DRG NO : GE/BKP/02/07) M & L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Locker steel complete all as directed shown drawings.

PAINTING OF ALMIRAH MEDIUM STEEL WITH SHELVES (DRG NO : FD-67(M),FD-1031,FD-1032) M & L for applying spray painting two coats with synthetic enamel (Olive Green) paint internally and externally by spray gun after removing of existing old worn out paint by any means with proper treatment from Almiram medium steel with shelves complete all as directed shown drawings.

PAINTING OF STOOL STEEL AND STOOL STEEL 2 FEET HEIGHT {DRG NO : FD-91(M)} M & L for applying spray painting two coats with synthetic enamel (Olive Green) paint by spray gun after removing of existing old worn out paint by any means with proper treatment from Stool steel complete all as directed shown drawings.

REPAIR TO CHAIR CB WITH ARMS FOR THE FOLLOWING (DRG NO : DB-10092) SRL ITEM NOS. 35 TO 42 FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak / Seasam) with 3 mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

ARM Removing of each decayed arms from its existing position and replace the same with new armmade out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing

POLISHING TO CHAIR CB WITH ARMS Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair CB with arms including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engineer-in-charge.

REPAIR TO CHAIR CB W/O ARMS FOR THE FOLLOWING (DRG NO : DB-10091) SRL ITEM NOS. 43 TO 49:- FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak / Seasam) with 3 mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

POLISHING TO CHAIR CB W/O ARMS Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair CB w/o arms including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engineer-in-charge.

REPAIR TO CHAIR CB OFFICE FOR THE FOLLOWING SRL ITEM NOS. 50 TO 57:- FRONT LEG Removing of each decayed front leg from its existing position and replace the same with new front leg made out from well seasoned 1st class hard wood (Teak Seasam) all as shown on drawing.

REAR LEG Removing of each decayed rear leg from its existing position and replace the same with new rear leg made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

FRONT RAIL Removing of each decayed front rail from its existing position and replace the same with new front rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

REAR RAIL Removing of each decayed rear rail from its existing position and replace the same with new rear rail made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

SIDE RAIL Removing of each decayed side rail from its existing position and replace the same with new side rail made out from well seasoned 1st class hard wood (Teak / Seasam) with 3 mm dia hole at 12.5 mm c/c for weaving of plastic cane all as shown on drawing.

STIFFENER Removing of each decayed stiffener from its existing position and replace the same with new stiffener made out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing.

ARM Removing of each decayed arms from its existing position and replace the same with new armmade out from well seasoned 1st class hard wood (Teak / Seasam) all as shown on drawing

POLISHING TO CHAIR CB OFFICE Removal of old existing worn out polish from exposed portion of wooden surface by any means of chair CB office including preparation of new wooden members by sand papering and making the furniture completely smooth for further new polishing (including polishing to all the exposed surface by spirit polish mixed with shellac Gde-I, chandras, burnt saina, raw saina, sindur etc till glossy surface is obtained upto the full satisfaction of the Engineer-in-charge.

RECANNIONG OF VARIOUS TYPE OF CHAIRS FOR THE FOLLOWING (DRG NO : FD-279, FD-280, FD-229) Removing of old unserviceable cane plastic from various chairs such as Chair dining. Chair writing, Chair CB office, Chair CB W/O arms, Chair CB with arms and Chair easy etc re-canning the same with new cane plastic 2mm wide half round white in colour for main canning and 3.5 to 4mm wide half round white in colour for border as approved quality all as shown on drawing

SANKAR TRADERS

PRASAD ENTERPRISE

BANERJEE CONSTRUCTION

M/s REETA ENTERPRISES

L.BHIMSEN

P N GUPTA AND SONS

M/S NEHAL ENTERPRISES