Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC KOONAMPALAYIL THULAPPALLI PO PATHANAMTHITTA 686510 | PATHANAMTHITTA | PATHANAMTHITTA | KERALA | 686510 | ₹33.6 L Quoted ₹33.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹34.9 LRejected-AOC BUILDING NO XIV 231 AMPARANIRAPPEL P O BHARANANGANAM KOTTAYAM 686578 | KOTTAYAM | KERALA | 686578 | ₹34.9 L | L2 | Rejected-AOC L2 |
| 3 | L3₹36.4 LRejected-AOC | ₹36.4 L | L3 | Rejected-AOC L3 |
| 4 | L4₹36.2 LRejected-AOC | ₹36.2 L | L4 | Rejected-AOC L4 |
| 5 | L5₹41.6 LRejected-AOC | ₹41.6 L | L5 | Rejected-AOC L5 |
| Sl No | Description | Qty | Unit | CATT CONSTRUCTIONS L2 | jibin joseph L1 | P ANILKUMAR L5 | jayesh creatives pvt ltd L3 | A R Constructions L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00Providing sheet roof over the open Terrace of Dinning hall | ||||||||
| 1.01 | 24.2Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of
building/structure, upto 25 metre height, above ground level, including additional rows
of scaffolding in stepped manner as per requirement of site, made with 40 mm dia
M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup
& lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system
in the scaffolding for working platform etc. and maintaining it in a serviceable
condition for execution of work of cleaning and / or pointing and / or applying
chemical and removing it thereafter. The scaffolding system shall be stiffened with
bracings, runners, connecting with the building etc, wherever required, if feasible, for
inspection of work at required locations with essential safety features for the workmen
etc., complete as per directions and approval of Engineer-in-Charge. Note: - ( 1) The
evaluational area of the scaffolding shall be measured for payment purpose, (2) The
payment will be made once only for execution of all items of such works | 70 | sqm | 100 ₹7,000 | 250 ₹17,500 | 343.03 ₹24,012.10 | 307.16 ₹21,501.20 | 300 ₹21,000 |
| 1.02 | 5.9.6Centering and shuttering including strutting, etc. and removal of form for:Columns,
Pillars, Piers, Abutments, Posts and Struts | 14.4 | sqm | 900 ₹12,960 | 300 ₹4,320 | 968.07 ₹13,940.21 | 866.92 ₹12,483.65 | 845 ₹12,168 |
| 1.03 | 4.1.2Providing and laying in position cement concrete of specified grade excluding the cost
of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse
sand (zone-III) derived from natural sources : 3
graded stone aggregate 20 mm nominal size derived from natural sources) | 1.08 | cum | 9,300 ₹10,044 | 6,500 ₹7,020 | 9,369.09 ₹10,118.62 | 8,390.23 ₹9,061.45 | 8,000 ₹8,640 |
| 1.04 | 10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 4,887.96 | kg | 150 ₹7.3 L | 139 ₹6.8 L | 186.48 ₹9.1 L | 158.19 ₹7.7 L | 155 ₹7.6 L |
| 1.05 | 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses
and including cutting to size and shape wherever required. | 856.36 | sqm | 720 ₹6.2 L | 690 ₹5.9 L | 808.35 ₹6.9 L | 709.89 ₹6.1 L | 730 ₹6.3 L |
| 1.06 | 12.4.2Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with
polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers
complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 51.8 | metre | 600 ₹31,080 | 600 ₹31,080 | 903.77 ₹46,815.29 | 809.34 ₹41,923.81 | 790 ₹40,922 |
| 1.07 | OD126313/2025-2026Providing and fixing 200 mm PVC Gutter fixed with polymer coated J or L hooks,
bolts and nuts 8 mm dia G.I. limper and bitumen washers etc. complete | 103.6 | metre | 400 ₹41,440 | 500 ₹51,800 | 302.2 ₹31,307.92 | 347 ₹35,949.20 | 375 ₹38,850 |
| 1.08 | 50.18.9.19.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m
spacing . This includes jointing of pipes with one step PVC solvent cement and testing
of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 -
External work- Exposed on wall | 120 | metre | 370 ₹44,400 | 400 ₹48,000 | 383.16 ₹45,979.20 | 358.87 ₹43,064.40 | 350 ₹42,000 |
| 1.09 | 50.18.9.22.2Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes,
including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow | 16 | nos | 110 ₹1,760 | 100 ₹1,600 | 105.06 ₹1,680.96 | 95.86 ₹1,533.76 | 90 ₹1,440 |
Tender Value
₹43.9 L
EMD Value
₹50,000
Closing Date
27 Nov 2025, 4:00 pmClosed
Regional Engineer 8111882858
Regional nirmithi kendra Vattiyoorkavu ph no 04712362229
Centering ,shuttering,PCC,Roofing work,PVC Gutter,Enamel painting
2025_KSNK_820953_1
KSNK/TECH/VKV/PSRO-132/2025
Open Tender
Civil Works - Buildings
75 days
Vithura
Refer NIT
6 documents required · 6 mandatory
₹2,500
₹50,000
Yes
9 Feb 2026
19 Nov 2025
29 Nov 2025
19 Nov 2025
27 Nov 2025
19 Nov 2025
19 Nov 2025 - 27 Nov 2025
Amount
Providing sheet roof over the open Terrace of Dinning hall
24.2Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-Charge. Note: - ( 1) The evaluational area of the scaffolding shall be measured for payment purpose, (2) The payment will be made once only for execution of all items of such works
5.9.6Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
4.1.2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
OD126313/2025-2026Providing and fixing 200 mm PVC Gutter fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers etc. complete
50.18.9.19.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
50.18.9.22.2Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Providing sheet roof over the open terrace of Type III Quarters
24.2Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-Charge. Note: - ( 1) The evaluational area of the scaffolding shall be measured for payment purpose, (2) The payment will be made once only for execution of all items of such works.
5.9.6Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
4.1.2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
OD125501/2025-2026Providing and fixing 200 mm PVC Gutter fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers etc. complete
50.18.9.19.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
50.18.9.22.2Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Providing sheet roof over the open terrace of House Master Quarter in Type III
24.2Providing and fixing double scaffolding system (Cup lock type ) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and / or pointing and / or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-Charge. Note: - ( 1) The evaluational area of the scaffolding shall be measured for payment purpose, (2) The payment will be made once only for execution of all items of such works
5.9.6Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
4.1.2Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.4.2Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2
OD126289/2025-2026Providing and fixing 200 mm PVC Gutter fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limper and bitumen washers etc. complete.
50.18.9.19.1Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
50.18.9.22.2Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
13.61.1Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
CATT CONSTRUCTIONS (BID ID -2442451)
jayesh creatives pvt ltd (BID ID -2443002)
A R Constructions (BID ID -2443009)
P ANILKUMAR (BID ID -2442992)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.44 MB
agreement.pdf
Tender Documents • 0.36 MB
tendercndtn.pdf
Tender Documents • 0.58 MB
EP.pdf
Additional Documents • 0.01 MB
BOQ_1376405.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid