Karnataka

To Be Opened

Works

Buildings

Improvements to Hanuman Temple of Kenchalarakoppa in Savadatti Nagar

Karnataka Neeravari Nigam Limited

KNNL Division MLBC Div No 2 Navilutheertha | Karnataka

Amount: ₹16.9 LCloses: 25 Aug 2026Closed

Timeline

Published11 Aug 2026
Closed25 Aug 2026

Tender Value

₹16.9 L

EMD Value

₹42,500

Closing Date

25 Aug 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

V K MUDIGOUDAR

Office Number

Mobile Number

Work Description

Improvements to Hanuman Temple of Kenchalarakoppa in Savadatti Nagar

Tender Information

Tender ID

KNNL/2026-27/BD/WORK_INDENT4430/CALL-2

Reference Number

KNNL/2026-27/BD/WORK_INDENT4430/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

KNNL Division MLBC Div No 2 Navilutheertha

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredA copy of the Registered KPWD Class IV & above contractor

RequiredLatest copy of the Income tax returns -ITR-V filed for the year 2025-26 mentioning PAN number

RequiredValid Employees provident fund -EPF registration certificate with latest paid challan

RequiredThe valid copy of GST Registration Certificate

RequiredTo qualify for award of this contract,Tenderer in his name should have in the last five years Achieved in at least One Financial years a minimum Financial Turnover of Rs.20.00 lakhs. All document/certificates issued by a Charted Accountant should have a UDIN generated through the ICAI Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document.

RequiredTo qualify for award of this contract,Tenderer in his name should have in the last five years Mandating Satisfactorily completed as a prime contractor, at least any construction work of i.e. Rs 10.00 Lakhs. The work done should be obtained from a competent authority not below the rank of Executive Engineer of the concerned division.

RequiredEach of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm/company. All the Documents uploaded should be produced in Original to the Executive Engineer Office within 7 days of the opening of the Technical Bid, Failing to which the bidder will be disqualified from the tender

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

NIL

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Regarding GST Note a)The amount put to tender is Exclusive of GST b)GST shall be paid to the tendered amount separately at the time of agreement/billing as per prevailing Government order.c)The increase in GST shall not be paid in the extended period of contractor for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

A copy of the Registered KPWD Class IV & above contractor

Latest copy of the Income tax returns (ITR-V) filed for the year 2025-26 mentioning PAN number

Valid Employees provident fund (EPF) registration certificate with latest paid challan

The valid copy of GST Registration Certificate

To qualify for award of this contract, each Tenderer in his name should have in the last five years is i.e., 2021-22 , 2022-23,2023-24 2024-25, and 2025-26. Achieved in at least One Financial years a minimum Financial Turnover (in all classes of civil engineering construction works only) of Rs.20.00 lakhs. All document/certificates issued by a Charted Accountant should have a UDIN (Unique Document Identification Number) generated through the ICAI (The Institude of chartered Accountants of India) Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document. Duly giving 10% escalation every year

To qualify for award of this contract, each Tenderer in his name should have in the last five years is i.e. 2021-22 , 2022-23,2023-24 2024-25, and 2025-26. Mandating Satisfactorily completed as a prime contractor, at least any construction work to an extent of 50% of the cost of the work i.e. Rs 10.00 Lakhs. The work done should be obtained from a competent authority not below the rank of Executive Engineer of the concerned division. Duly giving 10% escalation every

Each of the documents uploaded to the e-portal should be self-attested by the contractor or an authorized representative in case of firm/company. All the Documents uploaded should be produced in Original to the Executive Engineer Office within 7 days of the opening of the Technical Bid, Failing to which the bidder will be disqualified from the tender

The intending bidders are advised to visit the site of work before submission of the tenders

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5% of the Contract price plus full difference amount for below quoted tenders as additional security (for unbalanced tenders) in accordance with Clause of ITT and Clause of the Conditions of Contract.

The necessary certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e-tender document. The Original certificates/documents shall be produced on or before stipulated date and time for verification. Scanned signature of the bidder/authorized representative of the bidder shall be attached while uploading bid document.

If any of the dates mentioned above happen to be a general holiday, the next working day holds good.

The contractor should take still photos / videos of the work before commencement of works, during execution and after completion compulsorily. These photos/ videos should be made available to the implementing officer, for immediate reference during review of works to enclose it with completion certificate

The bidder at the time of execution of the agreement should give a detailed execution plan and fortnightly program to complete the work in full manner in 6 months without fail. The program can be modified with mutual consent.

The work will be constantly monitored by the Executive Engineer and if there is any slippage in achieving the program/ milestones month wise, a penalty / liquidated damages as indicated in the agreement / tender document would be levied. However, these liquidated damages will be refunded if the contractor makes good the shortfall in the subsequent months or completes the whole work before the stipulated date of completion

The Pre-qualification bid will be opened first and there after the financial bids of those prequalified will be assessed on payment of tenders processing fee. The financial bid will be opened subjected to the conditions that Electronic EMD payment is confirmed in the E-tender portal

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever

Corrigendum will be published in web site for all modifications/corrections if any

The intending bidders should note that, if any of lands either in part/parts or whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take possession of such land and start the work by the consent of the land owners before commencement of work at no extra cost to the Nigam and no claim whatsoever relating to non availability of land would be entertained.

The contractor should mention their recent correct postal address and e-mail address in the declaration form

Incomplete tender documents will be rejected

All materials like steel, cement etc., required for the above work should be procured by the contractor only at his own cost. And these materials will have to be got tested by the competent authority before put to use

The contractors shall send the authorization letter for their representatives duly attesting their signature.

Maintenance period or the defect liability period for this work is 12 months from the date of completion

As per the Karnataka building and other construction workers welfare cess act 1996, 1% of the bill amount will be deducted from the bills.

Tenders will be opened on the due date in presence of the contractor or their Authorized representatives.

Debarment of tenderers: The procurement entity may debar tenderer for a period not exceeding 3 years from participation in its tenders following such procedures as may be prescribed on the ground that tenderer is engaged in corrupt or fraudulent practices in competing or executing the contract including misleading the procuring entity or any stage of procurement activity with a fraudulent intention. ( KTPP Act 26A).

The payment of bills of this work will be made as and when the letter of credit is received under the same head of account from KNNL/Government of Karnataka.

The contractors should adhere to the accepted action plan submitted by him under any circumstances without linking to the pending bill payment of the work.

Typo-graphical errors if any will not be the ground for any claims by the Contractor

The contractor should furnish the name of the individual /firm with address and Telephone numbers with place of registration, year of incorporation etc

The tender processing charges paid by the bidders are not refundable even if the tenders are cancelled.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders.

The tenderer has to make his own arrangement for procurement of all materials required for the work. There is no departmental supply of materials. Contractor should procure only ISI mark materials and submit necessary quality control certificates from the authorized quality control authority, before execution.

Sub leasing of work in any form is prohibited

No quarries are approved by KNNL for materials. The quarries considered are for the estimate purpose only. The intending bidders shall visit the site, identify the quarries, ascertain availability for the quantity and quality of the materials required for the work and shall quote his rates accordingly. No extra claim whatsoever will be entertained in this regard

The rates includes all leads and lifts and work shall be carried out as per the instruction of Engineer-in-charge .All specifications are as per relevant IS codes in vogue and Indian Road Congress. The rates for the specification in the Schedule B includes all lead and lifts irrespective of the distance and height, no extra claim will be entertained for additional lead and lifts.

The validity period of EMD shall be for a minimum period of 225 days from the date of opening of the tenders.

The EMD of the unsuccessful bidder will be refunded only after the acceptance of the tender by the competent

The tender inviting authority has got right either accepting tender or rejecting the tender without assigning any reasons

In case of death of contractor after executing the agreement commencement of the work , his legal heir if any eligible registered contractor and willing can execute and complete the work at the accepted tender rates irrespective of the cost of the work.

EMD amount and Amount put to tender will be as mentioned in the e-portal of respective work.

As per GO FD 5 EXP -12 / 2023 dated 15.05.2023 , the contractor shall be abide to provide e Bank Guarantee towards Security Deposits

The contractor shall produce the mineral dispatch receipt (MDR) from department of Mines & Geology for Exemption

Further information can be had from the office of the Executive Engineer , Office of the Executive Engineer, KNNL MLBCC Division No.2 Naviluteetha during office hours. Contact Phone. No- 08330 224500

Assessed available tender capacity equal to (AxNx1.50- B) where A is equal to Maximum value of civil engineering works executed in any one year during the last five years (2021-22 to 2025-26) (Updated to 2026-27 price level) taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which Tenders are invited. B is equal to Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next Four months (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹42,500

Important Dates

Last Activity

11 Aug 2026

Published

11 Aug 2026

Download Ends

17 Aug 2026

BOQ Preview

•

Improvements to Hanuman Temple of Kenchalarakoppa in Savadatti Nagar

•

Earth work in surface excavation by mechanical means for lowering &leveling the ground for all works other than foundation in all kinds ofsoils & upto depth not exceeding 300mm as per drawing and tech...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant...

•

Formwork, Centering & Scaffolding for columns, Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Formwork, Centering & Scaffolding for plinth beams, Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand),Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposit...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

•

Formwork, Centering & Scaffolding for columns, Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Formwork, Centering & Scaffolding for columns, Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m ...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : ...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggre...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchorin...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement con...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Providing and fixing door fixtures in position including cost of materials, labour, usage charges complete as per specifications, Complete with all lead & lifts as per direction of Engineer - in ...

•

Providing and fixing factory made ISI marked steel glazed doors,windows and ventilators, side /top /centre hung, with beading and allmembers such asF7D,F4B, K11 B and K12 B etc. complete of standardro...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffol...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfa...

•

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One coats on old work as per specifications and, Complete with all lead & lifts as per direc...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an e...

•

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand...

•

Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...

•

Supplying heavy gauge PVC conduit pipe a) 19/20mm dia 2mm thick(2/2) confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the sl...

•

Supplying heavy gauge PVC conduit pipe b) 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The ...

•

Supplying heavy gauge PVC Conduct Pipe a) 19/20mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks and ...

•

Supplying heavy gauge PVC Conduct Pipe b) 25mm dia 2mm thick thick with suitable size bends, metal junction boxes adhesive paste etc. by groove cutting in the wall and fixing by bracing U or J hooks a...

•

Supplying And Fixing Metal Fan Box with Round Hook. ,Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Supplying and fixing a) 19/20mm deep PVC / metal conduit Deep junction box. ,Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Supplying and fixing b) 25mm deep PVC / metal conduit Deep junction box. ,Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Supplying and fixing c) 32mm deep PVC / metal conduit Deep junction box. ,Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Supplying and flush mounting c) 10"x7"x3"(254x178x76) teak wooden box without front plank,made of not less than 12mm thick wood,after due groove cutting, Fininsihing with necessary cement plastering...

•

Extra for groove cutting a)upto 50mm conduit in brick wall/CC floor to the suitable depth for concealing of conduit/GL pipe and plastering finishing the wall upto wall surface ,Complete with all lead...

•

Pointing wiring using copper wire with switch:Supplying and wiring Short point upto 3m from tapping point to out let via switch adopting loop system in existing PVC Conduit /casing capping using 2x1.5...

•

Pointing wiring using copper wire with switch:Supplying and wiring Medium point above 3m upto 6m from tapping point to out let via switch adopting loop system in existing PVC Conduit /casing capping u...

•

Pointing wiring using copper wire with switch:Supplying and wiring Long point above 6m upto 10m from tapping point to out let via switch adopting loop system in existing PVC Conduit /casing capping us...

•

Wiring for lightining/power cuircuit using a)1.5 Sqmm. one of FRLS PVC insulated 1100 V grade, multistrand copper conducter single core wire in open or concealed system of wiring as per IS-694:1990 & ...

•

Wiring for lightining/power cuircuit using a)2.5 Sqmm. one of FRLS PVC insulated 1100 V grade, multistrand copper conducter single core wire in open or concealed system of wiring as per IS-694:1990 & ...

•

Wiring for lightining/power cuircuit using c) 4 Sqmm. one of FRLS PVC insulated 1100 V grade, multistrand copper conducter single core wire in open or concealed system of wiring as per IS-694:1990 & c...

•

Supplying and flush mounting powder coated / galvanized a) 4-5 Ways metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Ston...

•

Supplying and flush mounting powder coated / galvanized b) 6 Ways metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/...

•

Supplying and flush mounting powder coated / galvanized c) 8 Ways metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/...

•

Supplying and fixing superior quality a) 4 Module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on t...

•

Supplying and fixing superior quality b) 8 Module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on t...

•

Supplying and fixing superior quality c) 10-12 Module modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete ...

•

Supplying and fixing of a) 6 Amps one way modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ,Complete with all lead & lifts as per direction of Engin...

•

Supplying and fixing of b) 6 Amps 3 Ways Socket modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ,Complete with all lead & lifts as per direction of ...

•

Supplying and fixing of c) Stepped Fan Regulator modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. ,Complete with all lead & lifts as per direction of...

•

Supplying 3mm thick hylum plastic sheet with necessary nitches of fixing switches regulators etc and fixing on existing wooden or metal box using N.F.screws ,Complete with all lead & lifts as per dir...

•

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size a) 80 mm conduit using necessary machine screws. ,Complete with all lead & lifts as per direction of Engineer...

•

Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size a) 110 mm conduit using necessary machine screws. ,Complete with all lead & lifts as per direction of Enginee...

•

Supplying and fixing/replacing a) 6 Amps Lamp holder of 6/16/32Amps electrical accessories on existing switch board. ,Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Supplying & fixing A) 32Amps of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. ,Complete with all lead & lifts as per direction of Engineer - in...

•

Supplying and fixing a)6-32 Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, Indicator ON/OFF, energy cross-3 with Short circ...

•

Supplying & fixing of retrofit type -LED bulb.9W, 6500K with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI less than 70 percentage. efficacy greater than 80 lumen per watt...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing of a)15A to63A TPST(28/16) amps TPST/Change over swith /contractor along with neutral link with screws,bits,nuts and wiring using required capcity wires and circuit labeling (Page no.110 Item ...

•

supplying of a) 32Amps TPST with rewirable porelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approaved colour ,Complete with all lead & lifts as per direction of Engineer -...

•

Supplying and fixing a) 32 Amps of Porecelain fuse channel with cut out on existing wooden/panel using necessary nuts,bolts and washers

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz12/24V D.C. ,Complete with all lead & lifts as per direction of Engineer - in - Charge

•

Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat a)40x40x6mm with bolts,washers etc and painted with 2 coats of red oxide and then two coats of approved paint ,C...

•

Fabricating supplying and mounting MS box made out a) 14SWG suitable for floor/wall mounting.fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

•

Fixing a ceiling /wall mounting fan of all capacities and all types to existing with necessary clamps and 'S' hook made out of 15 mm dia MS rod, with 5 amps, celling rose of approved quality with nece...

•

Supplying 1) 48" sweep(1200mm) a) regular model capacitor type ceiling fan complete with down rod blade,shakle,canopies etc.,for operation on 230 volts,50 cycles,single phase AC supply confirming to I...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Recall order as GM quota.pdf

Others - Recall order as GM quota • 1.33 MB

tend notification 4430 Call-3 GMqt Hanuman temple.docx

Others - Tender Notification • 0.05 MB

Debarment circular 31-5-24.pdf

Others - Debarment circular • 0.60 MB

E- Bank Guarantee Reg_0001.pdf

Others - E- Bank Guarantee • 1.06 MB

Royalty - MDP related.pdf

Others - Royalty - MDP • 2.14 MB

Bid doc 4430 Call-3 GM Hanuman Temple Saundatti GM.docx

Tender Document • 0.96 MB

Verification of CA documents.pdf

Others - Verification of CA documents • 0.13 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

To Be Opened

Works

Buildings

Improvements to Hanuman Temple of Kenchalarakoppa in Savadatti Nagar

Karnataka Neeravari Nigam Limited

KNNL Division MLBC Div No 2 Navilutheertha | Karnataka

Amount: ₹16.9 LCloses: 25 Aug 2026Closed

Timeline

Published11 Aug 2026
Closed25 Aug 2026