Annual Plan-2025-2026 Amboori GP Pro.No.45/26-Renovation of Vazhichal Anganvadi in ward-11

Amount

Renovation of Anganvadi

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

OD143390/2025-2026:Dry rubble masonry with hard stone in foundation and above plinth excluding cost of through stone and bond stone including cost of all materials labour etc. complete as per direction of Department officers at site (modified the item 7.1.1)

OD143391/2025-2026:Random rubble masonry with hard stone in foundation and plinth up to plinth level with: Cement mortar 1:6(1cement : 6 coarse sand)

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD143404/2025-2026:Providing and fixing PVC fibre door including frame shutter and all cost of material labour charges and fixing charges

13.111.2:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

OD205717/2025-2026:Supply and erection of electrically driven best quality reputed make open well /Borewell submersible pumpset having bronze impeller,stainless steel shaft , capable of discharging required lpm agaist a total required head including all required accessories such as panel board,Main switch,suitable starter, volt metre, capacitor ammetre,pressure gauge, reflex valve, sluice valve, suitable size flat submerssible cable, wiring materials, GI delivery pipes of required lengthfor open well , required earthing, erection charges,electrification in the pump house etc. complete. Rate as per market rate. MR Supply and erection of electrically driven best quality reputed make open well /Borewell submersible pumpset having bronze impeller,stainless steel shaft , capable of discharging required lpm agaist a total required head including all required accessories such as panel board,Main switch,suitable starter, volt metre, capacitor ammetre,pressure gauge, reflex valve, sluice valve, suitable size flat submerssible cable, wiring materials, GI delivery pipes of required lengthfor open well , required earthing, erection charges,electrification in the pump house etc. complete.

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

18.54.1:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms

17.10.2.3:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board470x420 mm bowl depth 178 mm

17.25.2:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 550x400 mm

17.28.1.2:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe40 mm dia

RENJITH R (BID ID -2293301)

Bidder Name

RENJITH R

VIJITH.R