Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹27.7 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹32.3 L+₹4.6 L (16.6%)Rejected-Finance 2 A NARENDRA APPARTMENT CENTRAL JAIL ROAD SUBHASH BRIDGE AHMEDABAD 380027 | AHMEDABAD | AHMEDABAD | GUJARAT | 380027 | 2 | Rejected-Finance Not L-1 | |
| 3 | 3₹34.9 L+₹7.2 L (25.9%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | 3 | Rejected-Finance Not L-1 |
Tender Value
₹3.4 Cr
EMD Value
₹68,000
Closing Date
3 Dec 2019, 6:00 pmClosed
CWE AHMEDABAD
CWE AHMEDABAD
SPECIAL REPAIRS TO EXISTING SEWAGE LINES AT MIL STATION DHRANGADHRA UNDER GE(A) GANDHINAGAR
2019_MES_243541_3
86737
Open Tender
Civil Works - Water Works
Item Rate
180 days
ARMY AREA DHRANGDHRA
REFER TENDER
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹68,000
Yes
1 Sept 2020
19 Nov 2019
4 Dec 2019
19 Nov 2019
3 Dec 2019
21 Nov 2019
19 Nov 2019 - 22 Nov 2019
Amount
Excavating over areas, not exceeding1.5m deep and getting out in Hard/dense soil
All as per item No. 1 here in before but for depth exceeding 1.5m and not exceeding 3.0m
All as per item No. 1 here in before but for depth exceeding 3.0m and not exceeding 4.50m
Excavating over areas, exceeding1.5m deep and not exceeding 3.0m deep and getting out in Hard rock
All as per item No. 4 herein before but depth exceeceeding 3.0m and not exceeding 4.50m
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc,or for shafts, wells, cesspits,manholes, pier holes, etc nexc10 Sqm on plan and n exc1.5m in depth and getting out in hard/dense soil.
All as per item No. 6 herein before but depth exceeding 1.5m and n.exc 3.0m
All as per item No. 6 herein before but depth exceeding 3.0m and n.exc 4.5m
Excavating in trenches n.exc 1.5m wide and depth exceeding 1.50m and not exceeding 3.0m; for foundation etc,or for shafts, wells, cesspits,manholes, pier holes, etc nexc10 Sqm on plan and getting out in hard rock.
All as per item No. 9 here in before but depth exceeding 3.0m and not exceeding 4.50m
M&L for Cement concrete type C2, 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete
M&L for Reinforced concrete pipes, class NP3, 200mm bore of pipe, laid and jointed complete with collars all as directed.
All as per item No. 12 here in before but 250mm bore of pipe.
All as per item No. 12 here in before but 300mm bore of pipe.
All as per item No. 12 here in before but 450mm bore of pipe.
M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete1:3:6 type C2 for 200 mm bore pipe.
All as per item No. 16 here in before but for 250mm bore pipe
All as per item No. 16 here in before but for 300mm bore pipe
All as per item No. 16 here in before but for 450mm bore pipe
M&L for providing cement concrete Type C1, 1:3:6 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills,steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up tp60cm in height, copings,kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.
M&L for Cement concrete type B2, 1:2:4 (40mm graded aggregate) in surface channels and drains all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
M&L for Providing precast cement concrete Type B1 , 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry),for fixing steel rungs in man holes, string courses, copings, kneelers,apex stones, pier caps, columns, posts, boundary pillars,bed plates, pintle blocks, anchorage blocks,bonders(for stone walling),corbels, brackets, etc(of any section) indicated), with plain fair faces, including chamfers,weatherings, throating etc and setting in cement mortar 1:6 complete with joints to match all as specified and directed.
S&F Cast iron soil, waste and vent pipes 75mm bore (Sand cast pipes) in any length with or without ears,with cement joints, fixed to walls
S&F Cast iron cowls for 75mm bore pipe.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section)) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for Internal dia of pipe 200mm all as specified and directed.
All as per item No. 27 here in before but for internal dia of pipe 250 mm
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including all quoins, arches, pillars etc. complete all as specified and directed.
Taking down cement or cement lime plaster, any description on stone walls etc incl raking out joints hacking for key, scrubbing down with water, etc complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for such as MH covers etc complete all as specified and directed..
M&L for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) completed as specified and directed.
Ditto as above but except material
Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses completed as specified and directed.
M&L for rendering 15mm thick cement plaster 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as specified and directed.
Providing pre-cast Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc) and similar articles, set in CM (1:4).
S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inclding cranking, bendiing spirally for hooping for columns, hooking ends and biinding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No. 36 here in before but 10mm dia and above as in rungs of manholes , handles of manhole covers etc all as directed.
Supply only integral water proofing compound
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil.
Removing excavated material soils exc, 250m but n.exc. 500m and depositing where directed
Shree Krushna Supply Corporation
M/s Bombay Novelty Stores
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .