REPAIR TO MISC AREA OF MD ACCN AND PROVIDING POST ANTE TERMITE TREATMENT TO THE BLDGS UNDER AGE BR II IN NORTH COMPLEX AT IMA DEHRADUN

Amount

M&L for treatment of soil for ATT under existing floors using emulsion @ one litre per hole, including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 white cement: 2 coarse sand) using pigment to match the existing floors all as specified and directed by Engr in Charge.

M& L for anti termite treatment along the external wall below concrete or masonry apron and internal wall and floor in rooms, toilets, balcony etc below tiles or concrete floor using chemical emulsion @ 2.25 litres per linear metre at 300 mm spacing including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for anti termite treatment for voids in masonry using chemical emulsion one litre per hole including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for protective messure to kill termite family & growth on ceiling, wall,inside cupboards and similar termite infected surfaces by spraying anti-termite chemical @ 0,50 litre per sqm of rich emulsion of approved chemical, complete all as specified and directed

M&L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at all as specified and directed by Engr in Charge.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls in patches to make good to jambs , soffits, corneres etc at any position, complete all as specified and directed.

M&L For 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.

M&L for 25mm thick heavy duty prepolished colored Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula

M&L for Vitrified exterior colour tile of capsule pattern size 30 Cm x 30 Cm x 9.5 mm thick set jointed and pointed in neat cement slurry in floors with white cement and pigments over and including screed bed or bedding layer or mortar 15 mm thick in cement mortar 1:6 including dismantling existing tile complete all as specified and directed.

M&L for Rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula

M&L for Rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm Sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed.

Taking down steel window shutter n.exc 1Sqm and refixing in the same opening after replacement of broken hinges including welding,grinding, painting etc each complete all as specified and directed.

Taking down shutter of any description n exc 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed

S & F 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

S&F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed.

S & F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed.

M & L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed.

M & L for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed.

M & L for Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as specified and directed.

S&F 35mm thick 2nd class H.W. factory made plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed.

M & L for 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

M & L for 30mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with out glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F Butt hinges, 100mm long, medium weight, Stainless steel complete all as specified and directed. Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F Butt hinges, 100 mm long, extruded aluminium alloy,with mild steel hinge pin anodised complete all spacified as directed. Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F Butt hinges, 75 mm long, medium weight, Stainless steel steel complete all as specified and directed. Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F Butt hinges, 50 mm long, medium weight, Stainless steel complete all as specified and directed.Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F for 250mm long Stainless steel sliding door bolts, stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate complete all as specified and directed.Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F 100mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed.Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed.Make:- Aluminium Udyog New Delhi(Brand- Global),Mohan Matel Industries(Brand- Crown),Prayag.

S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed.

M & L for Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed.

M & L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good disturbed ground in natural ground.

Excavation in post holes (similar holes) each n exc 0.5 cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil.

M & L for PCC 1:2:4 type B-2 (using 20 mm graded crushed stone aggregate ) in foundation for post holes.

M & L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl of any description complete all as specified and directed.

S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works congorming to Fe 290 Gde E- 165, complete all as specified.

S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fuitte 3rd with washers and one hexagonal or square nut, exc. 22.5 cm but n exc. 30 cm long dia of shank 11 to 15mm, complete all as specified.

S&F PVC coated MS galvanised chain link fencing of size 75 x 75mm or less of any type of standard, rail straining bolts etc including provision of binding wire as directed by Engineer-in-charge.

S&F MS round bars 10mm dia & over cut to length bent to shape required incl cranking bending spirally for hoping for colm and backing ends and binding with & include MS wire (a headed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410W (grade E-250) quality A or Fe 290 (grade E- 165).

M&L for prepration of primed surfaces of wall/ ceiling and applying two coats of apex paint (Weather coat exterior paint) over a coat of primer complete all as specified and directed by the manufacturing firm. (Work to be carried upto a height of 7.5m). Note : The work shall be carried out through authorised applicator of Asian/Berger/Nerolac using mechanical and appropriate means, 05 years authorised applicator guarantee shall be produced by the contractor and 2.50% guarantee amount in the form of FDR of this item shall be diposted by the contactor.

M&L for Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 ( Old size brick) including demolition of old brick work complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 12mm thick plaster on other fair faces of brick work or concrete surface with using READIPLAST (Readymixed) cement plaster water powder ratio 17-19% by weight, finished even and smooth without using extra cement and mixed with water proofing compound as per manufacturer's instructions, complete all as specified and directed. Make:- UitraTach/ACC/Birala

M & L for preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) complete all as directed.

Aron Water Proofing and Pest Control

G S CONSTRUCTIONS

M/S S P BUILDERS

M/S PUNDIR BUILDERS

Sharda Enterprises

Amit Traders

sweety pest control

NORTH INDIA PEST CONTROL