Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-Finance | ₹17.8 L | L1 | Accepted-Finance Lowest Amount |
| 2 | L2₹18.3 L+₹43,500 (2.44%)Rejected-Finance | ₹18.3 L+₹43,500 (2.44%) | L2 | Rejected-Finance Highest Amount |
| Sl No | Description | Qty | Unit | Ajeev Kumar L2 | KULBINDER SINGH GOVT CONTRACTOR L1 |
|---|---|---|---|---|---|
| 1.00 | Providing and installing of Mechanical Screw Press of Akash Blowers /Euroteck /Krofta make for dewatering of municipal sewage sludge of capacity 6KL per hour with an inlet consistency of 1 percent complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. The mechanical screw press unit includes the following components. | 1 | Job | 18,26,500 ₹18,26,500 | 17,83,000 ₹17,83,000 Lowest |
| 2.00A) Technical Specification:- 1. Overall Dimensions = 3300x1050x1500mm 2. Material Of Construction = SS304 3. Screw Motor and VFD i. Motor Rating = 0.37 KW ii. Type of Motor = Standard TEFC SCR induction motor iii. Quantity = 1 Nos iv. Make of Motor = Crompton/Bharat Bijlee/ABB /Equ. v. Type of Operation = Control by VFD vi. Make of VFD = Nidec/Equ. 4. Screw Gear Box i. Type = Heli worm ii. Make = Power Build/ Bonfiglioli/Rotomotive / Transtecno/Equ. iii. Quantity = 1 Nos 5. Flocculator i. Dimensions = 600x600x750 mm ii. Material Of Construction = SS304 | |||||
| 3.006. Flocculator Motor and VFD i. Motor Rating = 0.18 kW ii. Type of Motor = Standard TEFC SCR induction motor iii. Quantity = 1 Nos iv. Make of Motor = Crompton/Bharat Bijlee/ABB /Equ. v. Type of Operation = Control by VFD vi. Make of VFD = Nidec/Equ. 7. Agitator Gear Box i. Type = Worm Reducer 30: 1 ii. Make = Power Build/Bonfiglioli/Rotomotive/ Transtecno/Equ. iii. Quantity = 1 Nos 8. Solenoid Valve i. Size = 20 NB ii. Body = SS304 iii. Seal = Nitrile 9. Local Control Panel i. Control Units = Drive motor for Screw press- 01 No & Drive motor for Flocculator- 01 No ii. Material of Construction = MS Powder Coated 10. Shower System i. Shower Nozzles = 1 Lot ii. Material of Construction = SS304 | |||||
| 4.00B) Accessories for Screw Press:- 1. Screw Press Feed Pump i. Type = Horizontal, Centrifugal, Non-clog ii. Capacity = 4 m3/hr iii. Head = 12 m iv. Material of Construction = Casing-CI, Impeller-SS-304 v. Quantity = 1 Nos 2. Wash Water Pump i. Type = Horizontal, Centrifugal ii. Capacity = 0.07 m3/hr iii. Head = 12 m iv. Material of Construction = Casing-CI, Impeller-SS-304 v. Quantity = 1 Nos 3. Poly Dosing Pump i. Type = Mechanically actuated diaphragm metering pump ii. Capacity = 160 lph iii. Pressure = 3 Kg/cm2 iv. Material of Construction = PP v. Quantity = 1 Nos | |||||
| 5.004. Poly dosing Tank and Preparation Tank i. Capacity = 1000 Liters ii. Material of Construction = LDPE iii. Quantity = 2 Nos 5. Agitator For Dosing tanks i. Material of Construction = SS-304 ii. Material of Construction of Mounting Arrangement = MSEP iii. Quantity = 2 Nos 6. Interconnecting, Piping, fittings and Valves (Battery limit 6m for each item) i. Material of Construction (Pipe) = MS ii. Material of Construction (Valves) = CI 7. Electrical Control Panel i. Material of Construction = MS Powder Coated ii. Switchgear = Schneider/L&T 8. Cable and Cable trays (Battery limit 6m for each item) = 1 Lot | |||||
Tender Value
₹18.3 L
EMD Value
₹36,580
Closing Date
18 Mar 2026, 11:00 amClosed
Er. Vivek Thakur EE
JSV Division Nagrota Bagwan
SH Providing and Installation of Mechanical Screw Press for dewatering of municipal sewage sludge.
2026_HPIPH_130684_1
EE/NBD/JSV/26-20151-20200 dt.07.03.26
Open Tender
Civil Works
Item Rate
90 days
Nagrota Bagwan
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹36,580
9 Jul 2026
7 Mar 2026
18 Mar 2026
7 Mar 2026
18 Mar 2026
7 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and installing of Mechanical Screw Press of Akash Blowers /Euroteck /Krofta make for dewatering of municipal sewage sludge of capacity 6KL per hour with an inlet consistency of 1 percent complete in all respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. The mechanical screw press unit includes the following components. | 1 | Job | - | - |
| 2 | A) Technical Specification:-
1. Overall Dimensions = 3300x1050x1500mm
2. Material Of Construction = SS304
3. Screw Motor and VFD
i. Motor Rating = 0.37 KW
ii. Type of Motor = Standard TEFC SCR induction motor
iii. Quantity = 1 Nos
iv. Make of Motor = Crompton/Bharat Bijlee/ABB /Equ.
v. Type of Operation = Control by VFD
vi. Make of VFD = Nidec/Equ.
4. Screw Gear Box
i. Type = Heli worm
ii. Make = Power Build/ Bonfiglioli/Rotomotive / Transtecno/Equ.
iii. Quantity = 1 Nos
5. Flocculator
i. Dimensions = 600x600x750 mm
ii. Material Of Construction = SS304 | - | - | - | - |
| 3 | 6. Flocculator Motor and VFD
i. Motor Rating = 0.18 kW
ii. Type of Motor = Standard TEFC SCR induction motor
iii. Quantity = 1 Nos
iv. Make of Motor = Crompton/Bharat Bijlee/ABB /Equ.
v. Type of Operation = Control by VFD
vi. Make of VFD = Nidec/Equ.
7. Agitator Gear Box
i. Type = Worm Reducer 30: 1
ii. Make = Power Build/Bonfiglioli/Rotomotive/ Transtecno/Equ.
iii. Quantity = 1 Nos
8. Solenoid Valve
i. Size = 20 NB
ii. Body = SS304
iii. Seal = Nitrile
9. Local Control Panel
i. Control Units = Drive motor for Screw press- 01 No & Drive motor for Flocculator- 01 No
ii. Material of Construction = MS Powder Coated
10. Shower System
i. Shower Nozzles = 1 Lot
ii. Material of Construction = SS304 | - | - | - | - |
| 4 | B) Accessories for Screw Press:-
1. Screw Press Feed Pump
i. Type = Horizontal, Centrifugal, Non-clog
ii. Capacity = 4 m3/hr
iii. Head = 12 m
iv. Material of Construction = Casing-CI, Impeller-SS-304
v. Quantity = 1 Nos
2. Wash Water Pump
i. Type = Horizontal, Centrifugal
ii. Capacity = 0.07 m3/hr
iii. Head = 12 m
iv. Material of Construction = Casing-CI, Impeller-SS-304
v. Quantity = 1 Nos
3. Poly Dosing Pump
i. Type = Mechanically actuated diaphragm metering pump
ii. Capacity = 160 lph
iii. Pressure = 3 Kg/cm2
iv. Material of Construction = PP
v. Quantity = 1 Nos | - | - | - | - |
| 5 | 4. Poly dosing Tank and Preparation Tank
i. Capacity = 1000 Liters
ii. Material of Construction = LDPE
iii. Quantity = 2 Nos
5. Agitator For Dosing tanks
i. Material of Construction = SS-304
ii. Material of Construction of Mounting Arrangement = MSEP
iii. Quantity = 2 Nos
6. Interconnecting, Piping, fittings and Valves (Battery limit 6m for each item)
i. Material of Construction (Pipe) = MS
ii. Material of Construction (Valves) = CI
7. Electrical Control Panel
i. Material of Construction = MS Powder Coated
ii. Switchgear = Schneider/L&T
8. Cable and Cable trays (Battery limit 6m for each item) = 1 Lot | - | - | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Termsandcond.pdf
Tender Documents • 0.21 MB
Form6.pdf
Tender Documents • 1.32 MB
BOQ_193239.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .