SPL REPAIRS TO BLDG NO T-20-23BD, T-20-23C, T-10-13BD, T-10-13C, T-13-16BD, T-13-16C AT 4 CSR AND PROVN OF CERTAIN SANCTIONED WKS (PHASE-20) UNDER GE (S) TEZPUR

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work.complete all as specified and as directed.

M&L 2nd class HW in scantling fixed clean swan in framed work.complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar all as directed.

M&L for old size sub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm complete all as specified and as directed.

Material and labour for old size sub Class B bricks bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness.complete all as specified and as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) complete all as directed

M&L PCC (1:4:8) Type D-2 using 40mm graded stone aggregate) as in foundation/mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains,hold Fast including all necessary form work complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in coping and like including watehreing, slightly rounded or hamfered angles and throating as directed including formwork.complete all as specified and as directed.

Reinforced cements concrete 1:1.5 :3 type A-1 (20 mm graded stone aggregate) in RCC lintel, band etc completer all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs and similar works for rough finished surface of concrete complete all as specified and as directed.

Formwork to soffits of suspended slabs such as cooking slab and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

.M&L for mild steel TMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.complete all as specified and as directed.

S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour ,tensile strength of 550 Mpa as in roof covering etc fixed with self tapping screws as specified

S&F 0.50 mm thick pre-painted galvalume aluminium zinc coating GI based plain sheet of any colour ,tensile strength of 550 Mpa as in ridge, gutter, Eaves board etc fixed with self tapping screws as specified.

Dismantling floor hearth wall tiling incl cement mortar bededing(but not backing), complete all as specified and as directed.

Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm screeding in Cement mortar 1:3.complete all as specified and as directed.

Roughening surafces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 Kg of cement per Sqm all as specified and directed

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) any shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4.complete all as specified and as directed.

All as per item No 27 above but in skirting over 10 mm thick screeding in cement mortar 1:3.complete all as specified and as directed.

M&L18- 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like fixed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match over with shade of granite complete all as specified and as directed.

M&L 18-20mm thick Granite (of any type) work (table rubbed and polished) for wall lining 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and as directed.

Sand Filling under floors/cushion or in foundations including watering and consolidation as directed by Engr -in-Chrage.

M&L Machine pressed precast concrete interlocking paver block (Glazed finish of any colour/patern )with Grey cement and pigment top surfaces treated by antifungal paint any shape any size of 60 mm thickness, M-30 Grade complete all as spedified and directed.

Supply and fix, in repair bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern )but including seat cover white closed type and flush pipe complete all as specified and directed

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stoppe but including brackets complete all as specified and directed

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.

M&L in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement all as specified and directed

M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent.complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

S&F in repairs 15 mm dia stop valve/angle valve fancy type chromium plated with screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F in repairs PTMT Swivel shower dia with shower Arm 15 mm dia 195 mm with bend of 45 degree with flange any colour for fixing mm pipe.complete all as specified and as directed.

Supply and fix, as in repair, bib tap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.

Supply and fix, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

S&F in repair tubular Towel rail chromium plated 600mm long 20mm dia D type complete all as specified and as directed.

S&F Pillar taps, 15 mm bore fancy type ,chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20 to 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws.complete all as specified and as directed.

S&F Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) fixed and netaly done with white cement to match tiles complete all as specified and directed.

Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 55 here in before but 20 mm bore.

M&L for laying 15 mm bore steel tubes medium grade glavanised with all fitting and fixed complete to walls/ceilings or laid in floors.complete all as specified and directed

M&L for laying 20 mm bore steel types medium grade galvanised with all fitting and fixed complete to walls and ceilings or laid in floors.complete all as specified and as directed.

Supply, lay and fix in repairs 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed.

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters including hacking out old broken glass any, size, quality or description from wooden / metal frame works all as specified and directed by Engr-in-Charge

Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed

Refixing only steel truss,rafter and purline of different size bend to shape, cut to length etc, including necessary welding,special shape washer, as directed by Engineer in Charge.

S&F MS framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-290 Gde -E complete all as specified and directed

S&F frame work as in ladders,Stairs (framed) including stringers, treades, landing,balusters, hand rails etc. including cleats, brackets, etc. and similar articles confirming to Fe 290 Gde E-265.complete all as specified and as directed.

M&L for Cutting holes intoexisting brick walls built in mud mortar and making good in cement concrete 1:2:4 type B-l as required surcafial area n. exc 150 sqcm.complete all as specified and as directed.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters (without taking off shutters from the frame) including dismantling of PCC bed blocks for hold fasts.complete all as specified and as directed.

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.complete all as specified and as directed.

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X 47mm, made out of 5mm plain colour PVC sheet reinfoced with M.S. square tube, supply and fixing in opening as per specification. complete all as specified and as directed.

S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in wood chowkhat complete all as per manufacturer instruction.complete all as specified and as directed.

Supply and fix, 30 mm thick factory made solid panel PVC shutters (conforming to IS : 4020) consisting of frame made out of mild steel tubes of 19 gauge and size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails. Mild steel frame shall have a coat of steel primer and covered with PVC channel size 30 mm x 50 mm forming stiles and 5 mm thick 75 mm wide PVC sheets for top rail, lock rails, bottom rail on either side and 10 mm thick 20 mm wide cross PVC sheets as gap insert for top rail and bottom rail, panneling of 5 mm thick PVC sheet to be fitted in mild steel frame welded/sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading in either side and joint together with solvenet cement adhesive etc an additional 5 mm thick PVC strip of 20 mm width to struck on the interior side of the ‘C’ channel using PVC solvent adhesive including and fitted to PVC door frame all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

S& F 100 mm Butt hinges extruded aluminium alloy with with MS Screw.complete all as specified and as directed.

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.complete all as specified and as directed.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters.complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress.complete all as specified and as directed.

Dismantling and breakingup drain pipes AC /CI /PVC set in cement mortar 100mm/75mm bore.complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls/floor 110mm bore.complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls/floor 75mm bore.complete all as specified and as directed.

S&F for PVC (SWR) with access door bend 110mm dia.complete all as specified and as directed.

S&F for PVC (SWR) with access door bend 75 mm dia.complete all as specified and as directed.

S& PVC (SWR) junction single (single 'T') equal or unequal 110mm bore.complete all as specified and as directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal 75 mm bore.complete all as specified and as directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement.complete all as specified and as directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement .complete all as specified and as directed.

M&L preparation of old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.complete all as specified and as directed.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint.complete all as specified and as directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer.complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L two coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall. complete all as specified and as directed.

M&L Applying two coats of Oil bound (Acrylic) distember by smart painting to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

M&L Applying one coat of Oil bound distember by smart painting to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L for Newly plastered surfaces of external wall with applying 1mm thick wall care putty to get smooth surface and applying two coats of apex /weather coat paints over a coats of damp shield complete all as specified and as directed by Engineer-in-Charge.

M&L 75 mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.5 mtr & filled with bituminous filler complete all as specified and as directed.

M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub base even and rough to recieve the topping layer as in sub base all as specified and directed

M&L P.C.C (1:3:6) type C2 using 40 mm graded stone aggregate for bed to drain pipes including packing under and hunching against side of pipes after they are laid down and tested complete for 150 mm bore pipe complete all as specified and as directed.

M&L 150 mm internal dia salt glazed stoneware drain pipes , laid in trenches and jointed as specified all as specified and as directed

Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.

Taking down old unsv submain wiring of any size complete all as specified and directed

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

M & L for point wiring for one light point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through and including PVC concealed conduit with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as modular switches, sockets and regulators with Modular PVC flush box and Modular White Cover plate with frame all as specified and directed.

All as per Ser item No.105 above but for 5 amps socket on same board.

All as per Ser item No.105 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FR cable controlled by one way switch, drawn through PVC casing caping with all accessories incl 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly and sunken cast pressed steel terminal box fixed flush to wall of not less than 1.6 mm thick for mounting of fittings such as switch, socket and speed regulator with 3 mm thick Laminated bakelite sheet (Make' Hylum') cover all as specified and directed.

All as per Ser item No. 108 above but for 5 amps socket on independent board.

All as per Ser item No.108 above but with 2.5 sqmm cables for 15 amps switch socket combination outlet on independent board complete all as specified and directed.

Supply and fix switch 5 amps switch flush type one way single pole.complete all as specified and as directed.

Supply and fix of Modular Socket, 6A - 5 pin combined 2 module, complete all as specified and as directed.

Supply and fix in replacement of Modular switch 1 way 16A, 1 module.complete all as specified and as directed.

Supply and fix in replacement of Socket 6A/16A - 5 pin combined 2 module,complete all as specified and as directed.

Supply and fix switch socket combination outlet flush type, 5 Pin, 5 amps.complete all as specified and as directed.

Supply and fix switch socket combination outlet universal type 5 pin 5/16 amps.complete all as specified and as directed.

Supply and fix in replacement ceiling rose surface backelite 65x50 mm having 3 terminals.complete all as specified and as directed.

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4 Sq mm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.complete all as specified and as directed.

Supply & fix purpose surface and wall mounted LED batten 20W 4ft with polycarbonate housing & integrated electronic driver. Make: Havells cat no. LHEXBLP7PN1W020 or equivalent or Phillips/Surya/Crompton/HPL/Bajaj

Supply & fix in replacement purpose surface and wall mounted LED batten 10W 2ft with polycarbonate housing & integrated electronic driver. Make: Havells cat no. LHEXBLP7PN1W010 or equivalent or Phillips/Surya/Crompton/HPL/Bajaj

Supply & fix in replacement LED light fitting 9/10W Environmental friendly, ultra modern, energy saving, surface mounted, decorative bulk head Back-lit LED luminaire comprising of high brightness LEDs. Make:Havells,Cat No-HEXAFT10WLED857SSYMBOPC or equivalent of Phillips/Surya/Crompton/HPL

Supply and fixing in replacement of LED Bldg Security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with GI Pipe 40 mm diabracket made out 120 degree in shape with 2 Nos GI strip clamps, nut bolts and washers all as directed Make : Havells,Cat No-ENDURACITYLITEPLAT PLUSSL30WLED757SASYBOPC or equivalent of Phillips/Surya/Crompton/HPL/Bajaj.

Supply and fixing in repair recessed dust free LED fitting 36 watts size(2X2)'' soft light glare free homogenous illumination very high efficiency enviormental friendly long life complete making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed. Make :-SLE DS 36 R of Surya or equivalent in Havells/ philips/CG/Usha/C&S.

S & F MCB DB Single pole and neutral 4 way Single door with 200 amps rated bus bar complete all as specified and as directed.

S&F Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

S & F Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.. Make: Havells/Legrand/L&T/Merlin Gerin/Standard

Supply and fix Heavy duty exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers Crompton,Cat No-EXHD300-4-1 or equivalent of Phillips/Surya/Crompton/HPL/Bajaj/Havells.

M/L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including excavation and earth work and testing on completion all as directed

S&F House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 degree bends. M.S.hook and stay or guy.complete all as specified and as directed.

Supply and fix electric water heater, storage type, heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, stainless steel connection pipes etc. complete all as directed Make: Crompton Cat No. Arno Neo-5S or equivelant Havells/Usha/Bajaj

Supplying and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of 2 core x 10 Sq mm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular all as directed

Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I.complete all as specified and as directed.

Supply and fix in repairs Tank Nipple suitable for HDPE water tank. (Minimum weight 20mm- 45gms).complete all as specified and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and as directed.

Supply and fix in repairs Gun-metal, globe or gate valves 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and as directed.

Supply and fix in repairs Ball valves 20 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm-210 gms).complete all as specified and as directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Chinmay Traders

D G Corporation

M/S Deep-Jeet