REPAIR TO FALSE CEILING AND PANALLING IN VARIOUS ZONES AT KHUMBATHANG IN THE AOR OF AGE BR-I UNDER GE KHUMBATHANG

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar patterns roof covering complete all as specified and directed by Engr-in-charge.

Dismantling wall and ceiling board (fibre,pulp, insulation, etc.) or insulation boards/ slabs/ blankets any description and thickness in any position including cover fillets complete all as specified and directed by Engr-in-charge.

Dismantling timber Scantling in fillets,rails, posts, rafters, purlins etc under 40 Sq. cm in section in any position unframed work complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm each & removing from site complete all as specified and directed by Engr-in-charge.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed by Engr-in-charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed by Engr-in-charge.

Supply and fixng in repair 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with self tapping screws as in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed by Engr-in-charge.

Supply and fixng in repair 0.63 mm thick Plain, galvanised, mild steel sheeting,in ridges,hips,valley guters,drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275,fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

Supply and fixng in repair Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

Supply and fixng in repair Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m( Bottom and middle rail width should be of size 125mm and top rail should be of size 100mm) with including necessary joining cleats, glazing clips, rubber neoprene beeding/packing, handles 2 Nos(one side sliding door bolt of size 300mm and other side tower bolt of size 200mm) in each door, hinges, anodised aluminum snap beading screws etc. with complete necesssary fittings all as specified and directed by Engr-in-charge.

Supply and fixng in repair 4.0 mm thick sheet glass ordinary quality fitted with beads in squares exc. 0.50 sqm in each pane complete all as specified and directed by Engr-in-charge.

M&L for glazed and skelton shutters 30 mm thick second class hard wood, open rebated and prepared to receive glass, guage, etc, divided in to square with plain, chamfered or rounded mitred and rebated sash bars, any numbers, all as specified.

Supply and fixng in repair 4.0 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed by Engr-in-charge.

Supply and fixng in repair galvanised MS wire mess 0.56mm nominal dia of wire and average width of appearature 1.18mm fixed with finned tack or galvanised wire staples complete all as specified and directed by Engr-in-charge.

M&L cement concrete type C-1, 1:3:6 (20mm graded crushed stone aggregate) as in cills, copings, bed plates, blocks for hold fasts, etc & similar work including weathering, slightly rounded or chamfered angles and throating, etc. complete all as specified and directed by Engr-in-charge.

Demolition of brick or stone boulder masonry built in cement mortar incl all quoins, arches, pillars etc, but exc ashlar facings dressed stone works and precast cement articles including rubbish off the premises, complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete block masonry with solid block exc 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) and set in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M&L PCC type C-1, (1:3:6) using 20mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match , complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.

M&L Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E- 250) quality-A and painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication, complete all as specified and directed by Engr-in-charge.

Supply and fixng in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-charge.

Supply & Fixing in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall/ridges, fixed with self tapping screws as complete all as specified and directed by Engr-in-charge.

M&L 9mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete all as specified and directed by Engr-in-charge.

M&L 12mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in wall complete all as specified and directed by Engr-in-charge.

M&L second class hard wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge.

All as per Srl Item no. 25 above but section of area exc 6 and n exc 13 Sqcm complete all as specified and directed by Engr-in-charge.

All as per Srl Item no. 25 above but section of area exc 3 and n exc 6 Sqcm complete all as specified and directed by Engr-in-charge.

All as per Srl Item no. 25 above but section of area n.exc 3 Sqcm complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick on fair face of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick rendering other than fair faces of brick / concrete surfaces in cement mortar 1:4 (without using extra cement) finished even and smooth complete all as specified and directed by Engr-in-charge.

M&L for prepartion new plaster surface and applying three coat of white wash on wall complete all as specified and directed by Engr-in-charge.

M&L for preparation new plastered surfaces of walls including cornices, pillasters etc, and applying two coats of cement base paint over and including one coat of white wash complete all as specified and directed by Engr-in-charge.

M&L preparation of new steel surfaces of any description and apply two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

M&L for wooden floor tiles of size 1200 x 200 mm and 7 mm thick with dove tailed joints laid over 150 Micron polythene film and 3mm thick foam as per manufacturers instructions including taking down of old wooden flooring and fixed with decorative wooden beadings as per site requirement complete all as specified and directed by Engr-in-charge, complete.

Deduct Credit for Demolished/Dismantled material Rs (-) 85719.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

M/S NISSAR ALI

M/S MOHD HUSSAIN

M/S WEB COMPNAY