New Construction of UPHC Main Building with C.wall, CC Road, & Elec. Work at Gandhidham-3, Ta. Gandhidham, Dist. Kutch.

Name of Work : New Construction of UPHC Main Building with C.wall, CC Road, & Elec.

Work at Gandhidham-3, Ta. Gandhidham, Dist. Kutch.

Quantities Total Amount

Quantities Total Amount

estimated In Figure

It According to

NBO NO. but may be Description Unit

No. In Words estimated

less Rs. Ps. quantities Rs. Ps.

Excavation for foundation upto 1.50 mt depth

Rupees One Hundred

No.1, including sorting out and stracking of usefulmaterials

1016.14 157.33 Fifty Seven and Thirty Cmt

and disposing the excaveted stuff upto 50 mt lead (B)

P.No.29 Two Paise

Dense or Hard Soil

Excavation for foundation upto 1.50 mt depth

Rupees Two Hundred

No.1, including sorting out and stracking of usefulmaterials

230.93 267.08 Sixty Seven and Eight Cmt

and disposing the excaveted stuff upto 50 mt lead (C )

Excavation for foundation upto for depth from 1.5 M.

Rupees Two Hundred

No.2, to 3.0 M. including sorting out and stracking of

117.07 287.21 Eighty Seven and Cmt

usefulmaterials and disposing the excaveted stuff

P.No.29 Twenty One Paise

upto 50 mt lead (C ) Hard Murrum

Excavation for foundation upto for depth from 1.5 M.

Rupees Three Hundred

04002D.0 to 3.0 M. including sorting out and stracking of

46.27 301.85 One and Eighty Four Cmt

usefulmaterials and disposing the excaveted stuff

upto 50 mt lead (D) Soft Rock not requiring Blasting

Filling available excavated earth(excluding rock) in

Rupees One Hundred

No.6, trenches, plinth, sides of foundations etc, in layers

1027.18 136.92 Thirty Six and Ninety Cmt

not exceeding 20 cm. in depth consolidating each

P.No.31 One Paise

deposited layer by ramming and watering.

Ch.4, Sr. Filling in plinth with sand under floors including Rupees Four Hundred

49.78 watering, ramming, consolidating and dressing etc. 481.80 Eighty One and Eighty Cmt

P.No.31 complete Paise

Ch.4, Sr. Filling in foundation and plinth with murrum or Rupees Two Hundred

161.20 selected soil in layers of 20 cm. thickness including 269.75 Sixty Nine and Seventy Cmt

P.No.32 watering, ramming and consolidating etc. complete. Five Paise

Providing and laying cement concrete 1:2:4 (1

Rupees Three Thousand

No.10, Cement : 2 coarse sand :4 graded stone aggregate

85.76 3740.22 Seven Hundred Forty Cmt

20m.m. nominal size) and curring complete excluding

P.No.38 and Twenty Two Paise

cost of form work in : (a) foundation and plinth

Ch.5, Sr. Providing and laying TMT bar Fe 415 reinforcement

No.20, Rupees Seventy Seven

37432.23 for R.C.C. work including bending, binding and placing 77.29 Kg

and Twenty Eight Paise

P.No.39 in position complete for all floors.

No.25, Providing throating or plaster drip and moulding to Rupees Forty Three and

I.No.5.4.18, R.C.C. chhajja Four Paise

Providing and Laying controlled cement concrete M

250 and curing including cost of form work but

Rupees Four Thousand

excluding the cost of reinforcement for reinforced

121.50 4603.58 Six Hundred Three and Cmt

concrete work in. As per specification. (A). For

Fifty Eight Paise

Foundations ,footing bases of columns and the like

and Mass concrete.

Rupees Seven Thousand

25.81 (B). For Columns 7027.58 Twenty Seven and Fifty Cmt

Rupees Six Thousand

65.66 (C) For Plinth Beam , Tie Beams at Ground Levels 6400.37 Four Hundred and Cmt

Thirty Seven Paise

Providing and laying controlled cement concrete M-

200 with curing etc. complete including the cost of Rupees Seven Thousand

40.22 form work but excluding the cost of reinforcement 7313.41 Three Hundred Thirteen Cmt

for R.C.C. work at Ground Floor as per specification. and Forty One Paise

Rupees Six Thousand

41.85 (b) Beams up to floor two levels 6819.52 Eight Hundred Nineteen Cmt

and Fifty Two Paise

Rupees Seven Thousand

Seven Hundred Thirty

10.70 (c) Lintels up to floor two level 7733.57 Cmt

Three and Fifty Seven

Rupees Seven Thousand

4.66 (d) Chajjas 7045.76 Forty Five and Seventy Cmt

Rupees Seven Thousand

Seven Hundred Forty

61.53 (e) Slabs 7743.67 Cmt

Three and Sixty Seven

Rupees Five Thousand

22.22 (f) Copings,Sills 5946.88 Nine Hundred Forty Six Cmt

and Eighty Eight Paise

Brick work using common burnt clay conventional

Rupees Four Thousand

No.2, building bricks having crushing strength not less than

70.63 4214.33 Two Hundred Fourteen Cmt

35 kg/Sq. Cm. in foundation and plinth in cement

P.No.64 and Thirty Two Paise

mortar 1:6(I cement : 6 fine sand)

Brick work using common Brunt clay building bricks

No.2+6, having crushing strength not less than 35 Kg./Sqcm. Rupees Four Thousand

12 I.No.6.13+6.1 208.38 In super structure above plinth level up to floor two 4496.05 Four Hundred Ninety Six Cmt

9, level in cement mortar 1:6 (1cement : 6 fine sand) and Four Paise

(B) Conventional G.F

Half brick masnory in common burnt clay

No.12+18, conventional building bricks having crushing strength Rupees Six Hundred

13 I.No.6.3(i)(B) 126.26 not less than 35 Kg/Sq.Cm in cement mortar 1:4 (1 684.26 Eighty Four and Twenty Smt

+6.32(B), cement:4 coarse sand) above plinth level upto floor Six Paise

Providing and fixing in position standared

Alluminium door with powder coating section frame

of alluminium standared section for outer frame size

50mm x 25 mm and door styles and top rails of

alluminium section size 50 mm x 25 mm fully powder

Rupees Four Thousand

coated and providing rubber gasket and glazing clips,

14 RA 15.75 4034.95 Thirty Four and Ninety Smt

around the Acrylic sheet all over including providing

heavy handle, stoppers, 5mm to 10mm thick. Acrylic

Sheet Scratches proof fixed with transparent silicon

gasket, including all required materials, labours and

equipment as per detailed drawing as directed by

engineer in-charge.

Providing & fixing in position standard extruded

Aluminum Three track with Three sliding shutters in

which Two Shutters with 5mm thick Frosted Glass

and one shutter with Stainless Steel Mosquito net In

Opening Possition always one of Mosquito net

shuuter should be in Close Possition all window

section with colour anodized in which Bottom Frame

Section 92.00 x 29.5 X 1.20 mm (having wt per Rmt

1.005 Kg) Frame section having three track top and

side of section size 92.00 x 29.50 x 1.20 mm size

(having wt per Rmt 0.907 Kg) with top section for all Rupees Four Thousand

15 RA 36.54 Three shutters Top and Bottom rail 20.00 x 50.00 x x 4762.15 Seven Hundred Sixty Smt

1.50 mm ( having weight per Rmt = 0.642 Kg) handle Two and Fifteen Paise

section of size 20.00 x 50.00 x x 1.50( having weight

per Rmt = 0.571 Kg ) and interlock rail 20.00 x 50.00 x

x 1.50 mm ( having weight per Rmt = 0.697 Kg ) of

approved shade & sliding shutters and providing

rubber gasket and Glsing Clips if necessary around

the glass allover including providing heavy handle,

heavy lock, bracket, stoppers. Approved Quality as

directed By Enginner Incharge including all required

materials labours and equipments as per detailed

drwg. as directed.

Providing & fixing in position standard extruded

Aluminum Ventilator with louvers with anodized

section for outer frame size 48 x 24 x 1.35 mm of

approved shade louvers from alluminum standard Rupees Three Thousand

16 RA 4.28 section and providing rubber gasket around the 3252.20 Two Hundred Fifty Two Smt

glass allover including providing Glass 4 mm thick and Twenty Paise

(Frosted or obscured on one side) fixed in chanels

including all required materials labours and

equipments as per detailed drwg. as directed.

Providing and fixing MS grills of required pattern as

per approved design and direction to window frames

No.10025A, with MS Flat/squrare or round bars at required Rupees One Hundred

I.No. 10.1, spacing and frame all around fixed with round Nine and Eight Paise

headed bolts & nuts or by screws to window frame

Steel work welded in built up section,framed work

including cutting,hoisting,fixing in position and

Ch-11, Sr. applying a priming coat of red lead paint(A) In beams Rupees Nine Thousand

19.04 and joints channels angles tees,flat with connecting 9108.48 One Hundred Eight and Qtl

P.no103 cleats as in main and cross beam, hip and jack Forty Eight Paise

rafters,purlin connected to common rafter and the

Ch-23, Providing and laying in trenches galvanised mild steel Rupees Nine Hundred

65.00 tubes ( Medium grade ) of the following nomonal 921.68 Twenty One and Sixty Rmt

P.no 199 bore tubes including all necessary fitting.(F) 80mm Seven Paise

Providing & fixing in position standard extruded

alluminium partition with colour anodized of

micron hollow section frame of approved shade &

pivoted single shutter fabricated from alluminium

standard section for outer frame size 101 mm x

mm (of app. wt. 1.2 Kg/Rmt.) and door styles and top

rail of alluminium section size 47.5 mm x 44.5 mm (of

app. wt. 1.05 Kg/Rmt.) bottom rail & lock rail for door Rupees Five Thousand

20 RA 22.05 size 114 mm x 44.5 mm (of app. wt. 1.30 Kg/Rmt.) 5342.90 Three Hundred Forty Smt

and providing rubber gasket and glazing chips around Two and Ninety Paise

the glass allover including providing heavy handle,

heavy lock, door closer, bracket, stopeers. 5mm thick

transparent float glass of copper / grey tint

(structural glass) fixed with transparent silicon gasket

and 6mm thick compact sheet in bottom panel

including all required materials , labours and

equipments as per detailed drawings and as directed.

Provoding and fixing flush door shutters, solid core

construction without frame with cross board and face Rupees Three Thousand

veneer or plywood face panels, including MS hinges Six Hundred Twenty

with necessary screws. (B) Non-decorative type and Three and Eighty Eight

block board core MS hinges in flush door shutters (1) Paise

32 to 35MM Shutters

Providing and fixing in position standared

Alluminium cup board shutter with powder coated

frame of alluminium standared section for outer

frame size 50mm x 25 mm and door styles and top

rails of alluminium section size 50 mm x 25 mm fully

powder coated and providing rubber gasket and Rupees Three Thousand

22 RA 64.00 glazing clips, around the Acrylic sheet all over 3959.20 Nine Hundred Fifty Nine Smt

including providing heavy handle, stoppers, 5mm and Twenty Paise

thick. Acrylic Sheet Scratches proof fixed with

transparent silicon gasket, including all required

materials, labours and equipment as per detailed

drawing as directed by engineer in-charge.As per

Providing and fixing in position collapsible steel

shutters with vertical channesl 20 x 10 x 2 mm braced

Ch.11, Sr. with flat iron diagonals 20 x 5 mm size with top & Rupees Six Thousand

7.20 bottom rails of T iron 40 x 40 x 6 mm with 38 mm dia 6071.50 Seventy One and Fifty Smt

P.No.103 steel pulleys complete with bolts, nuts, locking Paise

arrangements, stoppers, handels including applying a

priming coat with red lead paint etc. complete

Providing and fixing bright finish brass hydraulic door

Rupees One Thousand

closer of approved model and make with necessary

24 RA 15.00 1956.37 Nine Hundred Fifty Six Each

accessories and screw etc. complete as per direciton

and Thirty Seven Paise

of enginer in charge.

Providing. & laying 15-18mm thick polished Kota

stone slab flooring over 18-20 mm (average) thk base

Rupees One Thousand

No.14012A, of cement mortar 1:6 (1 cement : 6coarse sand). or

55.64 1013.87 Thirteen and Eighty Six Smt

L.M. 1:1.5 laid over and jointed with gray cement

slurry Including rubbing & polishing etc. complete

(A) 15 to 18 mm thick

Providing. & laying polished kota stone slab 15-18

Ch.14, Sr. mm thick in risers of steps, riser, dado and pillars laid Rupees One Thousand

21.07 on 10 mm th. Cement mortar 1:3 (1 cement : 3 coarse 1144.15 One Hundred Forty Four Smt

P.No.122 sand)and jointed with gray cement slurry including and Fourteen Paise

rubbing & polishing etc. comp.

Providing. & laying 50mm thick cement concrete

Rupees Three Hundred

No.14015B, flooring 1:2:4 (1 cement : 2 coarse sand: 4 graded

111.00 339.08 Thirty Nine and Seven Smt

stone aggregate 20 mm nominal size) laid in one layer

finished with a floating coat of neat cement.

Providing and laying Ceramic tiles 6mm thick in

Rupees One Thousand

No.14008B, flooring treads of steps and landing laid on a bed of

23.65 1017.30 Seventeen and Thirty Smt

12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.

Providing and laying coloured glazed tiles of the size

Rupees One Thousand

Ch.14, Sr. Four Hundred Eighty

383.23 mm in skirting, risers of steps and dedo on 10 mm. 1488.24 Smt

Eight and Twenty Three

thick cement plaster 1:3 (1 cement : 3 coarse sand) &

jointed with white cement slurry.

Providing and laying water proofing treatment on

terrace including applying neat cement slurry

2.75kg/cm2 on cement admixed with water proofing

component after cleaning the surface /laying cement

concrete with brick bat 75 mm to 100 mm thick with

50%of C.M. 1:5 to required slope including ramming

at junction of wall and slab after two days of proper

curing applying broken china mosaic flooring for plain Rupees One Thousand

30 RA. 372.23 and curve surface 12mm to 20mm white colour 1119.08 One Hundred Nineteen Smt

broken piece of glazed tiles to be laid over 12mm and Eight Paise

thick cement mortar bedding of CM (1:3) to plain and

slop and to be tampered to bring mortar cream up to

surface with using white cement and incl. Rounding

of junctions and extending them up to 15 cm along

the wall and curing with bends any patterns or design

as per drawing and direction incl. cleaning with water

and oxalic acid.(10 years Guarrenty

Providing and fixing 12-15mm thick both side polish

Rupees One Thousand

kota stone shelves below platform, in store or in

31-A RA. 14.72 1113.02 One Hundred Thirteen Smt

cupboards including fixing in position front edge

machine cut polishing etc. complete.

Providing, fixing and construction of sandwitch type

platform with 25mm thick double polished Kotah of

uniform size and colour for top & vertical supports

(double kota) at 50 cm interval in Kitchen/ Pantry/

Counter/ Laboratory etc with fascia patty 100mm

wide with moulding including necessary cement Rupees Three Thousand

31-B RA. 38.40 mortar 1:2 . Kota shall be fixed over 25 mm thick 3055.25 Fifty Five and Twenty Smt

rough Kota bottom, cement joints and pointing as Five Paise

specified with necessary making of edges, polishing

curing daily mopping with water and kerosene as

directed for atleast 15 days or upto the satisfaction of

engineer-in-charge.As per specification. (Only top

area of platform shall be measured and paid for).

Providing 15 mm. Thick cement plaster in single coat

No.2:17:60 (i) on fair side Brick/concrete walls for interior plastering Rupees Two Hundred

32 +4:17:69 1399.46 up to G.F. and finished even in smooth (ii) Cement 257.08 Fifty Seven and Seven Smt

+6:17:91 mortar 1:4 ( 1 cement : 4 sand) Paise

Ch.17 Providing 10 mm thick cement plaster in single coat

No.1.17:58 (i) on fair side bricks/concret walls for interior plastering Rupees Two Hundred

+6:17:91 up to floor two level (G.F.) finished even and smooth Twelve and Fifteen Paise

P.114,115 in cement mortar 1:4 (1 cement : 4 sand)

20 mm. Thick sand faced cement plaster on walls up

Ch.17, Sr. to height 10 meters above ground level consisting of Rupees Three Hundred

414.99 12 mm. Thick backing coat of c.m. 1:3 (1 cement : 3 315.69 Fifteen and Sixty Eight Smt

P.No.136 sand) and 8 mm. Thick finishing coat of c.m. 1:1 (1 Paise

cement : 1 sand) etc. complete.G.F.

Distempering ( Three coats) with dry distemper of

approved brand & manufacturer & of required shade

on ceiling surfaces to give an even shade, over &

Rupees One Hundred

024, I.No. including lapi & primary coat with alkali resistance

342.77 107.92 Seven and Ninety One Smt

primer of approved brand aftere throughly brushing

P.No.143,14 Paise

the surface free from mortar fropping & other foreign

matter & also including perparing the surface even &

smooth. for celling on 10 mm plaster

Wall painting (two coats) with plastic emulsion paint

of approved brand and manufacture on wall surface

No.18031, to give an even brushing the surface free from mortar Rupees Eighty Four and

I.No. 18.57, droppings and other foreign matter and sand Thirty Six Paise

prepared smooth.

Finishing wall with weather proof exterior emulsion

Ch.19, Sr. paint on wall surface (two coats) to give an required Rupees One Hundred

37 No.19031, 1165.83 shape even shade after thoroughly brushing the 120.26 Twenty and Twenty Six Smt

I.No 892 surface to remove all dirt, and remains of loose Paise

powdered materials.etc complete

Painting two coats (including priming coat) on new

19001+1900 steel and other metal surfaces with sythetic enamel Rupees One Hundred

38 2, I.No.19.2 + 60.27 paint, brushing interior to give an even shade 128.62 Twenty Eight and Sixty Smt

19.7, including cleaning the surface of all dirt,dust & other Two Paise

foreign matter.

Carrying out plinth treatment to post construction /

exitsting structure by spraying chemical solution for

termite control treatment incl. labour and materials

consistent with I.S.I. specification using chlordene and

Rupees One Hundred

22007, chiorpurfiles 20 EC as per 6131 paret II consentration

391.45 124.35 Twenty Four and Thirty Smt

weight one percent is recommended. i.e. one litre

P.No.187 Five Paise

EC chemical emulsion with 19 litre give 1 %

concretration inclusive of one litre chemical emulsion

application at the rate of 5 litre chemical/sq. mt. of

surface is recommended as per I.S.

Providing, laying and jointing in true line and level

U.P.V.C. Pipe (SCH-40) line including fittings make

Prince/Supreme/Astral/Finolex or equivalent as

Ch.23, Sr.No. approved by Engineer in charge. Pipe shall be fixed on

23061, Rupees Seventy Two and

40.00 the wall with the help of clamp at every two meter 72.65 Rmt

Sixty Four Paise

P.No.206 C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent,

including cost of all materials.(A) 15mm

23062, Rupees Ninety One and

Eighty Three Paise

Ch.23, Sr.No. Rupees One Hundred

40.00 (C) 32mm 119.15 Nineteen and Fourteen Rmt

Ch.23, Sr.No. Rupees One Hundred

50.00 (D) 40mm 148.12 Forty Eight and Eleven Rmt

Providing and fixing in position PVC cowl went of 100 Rupees One Hundred

mm dia.As per specification. Fifty One and Fifty Paise

Providing and fixing PVC SWR Nahni trap IS 14735 for

Ch.23, Sr.No. drain - 75 mm diameter with jali of the following Rupees Five Hundred

42 23068, I.No., 16.00 nominal diameter of self cleansing design with C.I 586.27 Eighty Six and Twenty Each

P.No.208 scread down or hinged grating including the cost of Seven Paise

cutting and making good the walls.

Providing and fixing white or coloured glazed china

vitreious china orrisa pattern water closet of size

Rupees One Thousand

Ch.no-23 x 440 mm including providing and fixing vitreous

43 Sr.No.23111 5.00 china 100 mm size 'P' or 'S' trap including jointing the 1319.53 Each

+ 23113 Nineteen and Fifty Three

trap with pan and soil pipe in CM (1:1) (1 cement :1

fine sand) and pair of foor rest etc complete.As per

Providing & fixing wash down water closet (Europian

I No. type W.C. pan) with integral 'P' or 'S' trap including Rupees One Thousand

3.00 jointing the trap with soil pipe in cement mortar 1:1 1648.15 Six Hundred Forty Eight Each

213+23.121 (1 cement : 1 fine sand) with plastic seat and cover. and Fourteen Paise

(A) Vitreous china pattern

Providing and fixing flat back wash basin 550 mm x

400 mm size of first grade, white in colour with

single hole for pillar trap with CI or MS brackets

35-A+23.136- painted with including cutting holes and making good

A+23.95A- the same including providng and fixing CP brass waste

A+23.96A,Sr Rupees Two Thousand

coupline 32mm dia including providng and fixing MI

45 No.23018+23 10.00 2242.99 Two Hundred Forty Two Each

020A+23021 washer uinon 32 mm dia, including providng and

and Ninety Eight Paise

A+23029A+2 fixing 15mm dia pillar tap capsten head screw down

3030A high pressure with screws, shanks and back

4 nuts,including providing and fixing waste pipe 15mm

x 600 mm pvc inlet connection 15mm brass screw

down stop tap with necessary fititngs etc. complete

Ch.23, Sr.No. Providing and fixing ( 600 X 450 X 150 mm) size

23019+2302 vitreous china laboratory sink with CI or MS brackets Rupees Two Thousand

5.00 painted white including cutting holes in wall and 2505.13 Five Hundred Five and Each

3.135+23.13 making good the same 40 mm dia CP waste couplin Thirteen Paise

6, P.No.203 rails etc. complete.As per specification.

Providing and fixing 600 x 450 mm bevelled edge

Rupees Eight Hundred

23024, mirror of superior glass mounted on 6 mm thick A.C.

5.00 859.41 Fifty Nine and Forty Each

sheet or ply wood sheet and fixed to wooden plug

with C.P. brass screw and washer

Ch.23, Sr.No. Providing and fixing C.P. brass towel rail comoplete Rupees Six Hundred

5.00 with C.P. brass bracket fixed to wooden plug with C.P. 616.42 Sixteen and Forty Two Each

P.No.203 brass screws (B) 600 x 20 mm size Paise

Ch.23, Sr.No. Providing and fixing screw down bib taps brass Rupees One Hundred

15.00 chromimum plated screw down bib tap 186.83 Eighty Six and Eighty Each

P.No.203 (I) 15 mm dia Two Paise

Ch.23, Sr.No. Rupees One Hundred

23031(E), Providing and fixing gun metal check or non return

3.00 186.83 Eighty Six and Eighty Each

full way wheel valve. 40mm dia

P.No.204 Two Paise

Ch.23, Sr.No. Providing. and fixing chromium plated brass half turn Rupees Two Hundred

2.00 flush cock 25mm dia including fixing in pipe line 263.77 Sixty Three and Seventy Each

P.No.204 etc.comp. Seven Paise

Ch.23, Sr.No. Rupees One Hundred

23037(A-2), Providing. & fixing 50 mm dia ball cock of copper

4.00 189.84 Eighty Nine and Eighty Each

metal and approved quality as directed.

P.No.205 Three Paise

Providing and fixing brass cromium plated surgical Rupees Seven Hundred

53 RA 4.00 handle cock of approved size 15mm dia As per 785.78 Eighty Five and Seventy Each

specification. Eight Paise

Supplying & fixing PVC water tank of Sintex including

delivery at site, supply and fixing of lintel, outlet, air

vent overlow, drainaige sleves of the specified size,

with necessary neoprene gasket/packing/wshers, GI

washer & check nuts etc. all complete as directed on Rupees Seventeen and

terrace, lofts in bathroom etc. at any height. The rate Seventeen Paise

shall include for fixing of any additional accessories

supplied by the supplier. The necessary pedestal/

supporting structrures shall be measured under the

relavant items etc complete.As per specification.

Providing and fixing S.W. Gully trap with C.I. Grating

brick masonry chamber with precast r.c.c. cover with

Rupees One Thousand

frame of 300 mm. X 300 size (inside) heavy duty.As

55 RA 10.00 1401.88 Four Hundred One and Each

per specification.

Eighty Eight Paise

(I) Square mouth traps

(B) 150 mm. X 100 mm size P or R type

Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand and

Ch.19, Sr.No. manufacture on new wall surface to give an even Rupees Forty and Fifty

P.No.148 shade including thoroughly brushing the surface free Nine Paise

from mortar dropping and other foreign matter and

sand papered smooth.

Constructing brick masonary chamber for

underground C.I. inspection chamber & bends with

bricks having crushing strength not less than

kg/cm2 in C.M. 1:5 with precast r.c.c. cover with

frame heavy duty 445 mm x 610 mm internal

dimensions : total weight of cover with frame to be Rupees Three Thousand

not less than 38 kgs. (Wt. of cover 23 Kgs. and Wt. of One Hundred Twenty

frame 15 Kts. (R.C.C. top slab with 1:2:4 mix (1 Eight and Ninety Eight

cement : 2 coarse sand : 4 graded stone aggregate 20 Paise

mm size) foundation concrete 1:5:10 inside plaster

mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc. comp. (A) Inside dimensions, 455mm. x

610mm. and 450 mm. deep for single pipe line.

Providing and laying to wall ceiling and floor 6.0 kg.

f/cm2 working pressure polythelen pipes of the

Rupees Seven Hundred

following dia. low density, complete with special

58 R.A. 40.00 757.50 Fifty Seven and Fifty Rmt

flange compression type fittings, wall clamps etc.

including making good the wall ceiling and floor as

per specification. 150mm Dia.

Providing and laying marble stone slab flooring over

Rupees Two Thousand

15-18mm (average) base of cement mortar 1:6 (1

14011, One Hundred Ninety

49.90 Cement : 6 coarse sand) or L.M.1:1.5 and jointed with 2194.76 Smt

Four and Seventy Six

P.No.122 grey cement slurry including rubbing and polishing

complete.(B) Marble slab 15-18mm. Thick.

Site clearance including clearing and grubbing of land,

Ch.26, Sr.No. uprooting wild vegitation,grass,bushes, sappling of

16117A, Rupees Eight and Forty

2700.00 trees of growth upto 3 mt.and disposing the 8.42 Smt

P.No.333 excavated material up to 100 lead or as directed by

Engineer Incharge.As per specification.

Providing and laying Vitrified tiles , 24'' x 24'' in

Rupees One Thousand

14008C, flooring treads of steps and landing laid on a bed of

264.17 1120.36 One Hundred Twenty Smt

12mm thick cement mortar 1:3 (1-cement : 3-coarse

1), P.No.121 and Thirty Six Paise

sand ) finishing with flush pointing in white cement.

Providing and laying Vitrified tiles, 24'' x 24'' in skrting

Rupees One Thousand

14009C, risers of steps and dedo on 10mm thick cement

2.27 1195.02 One Hundred Ninety Smt

plaster 1:3 (1-cement : 3-coarse sand) and jointed

1), P.No.122 Five and Two Paise

with white cement slurry

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Rupees One Hundred

Sr.No.23055 Sanitation Foundation (NSF) seal for potable water of

10.00 170.36 Seventy and Thirty Five Rmt

following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Rupees Two Hundred

Sr.No.23057 Sanitation Foundation (NSF) seal for potable water of

10.00 253.82 Fifty Three and Eighty Rmt

folllowing dia. nominal bore tube fitting and clamps

P.No.206 Two Paise

including making good the wall, ceiling and floor etc.

complete. (C) 25 mm.

Providing and fixing to wall ceiling and floor 10.0 Kg.

F/Cm2 working pressure polythene pipes of the

Rupees Two Hundred

Sr.No.23004 following outside Dia. Low densidy, complete with

30 280.23 Eighty and Twenty Rmt

special falnge compression type fittings, wall clipsetc.

P.No.200 Three Paise

65 including making good the wall ceiling and floor.(F)

Ch.23, Rupees Three Hundred

80 (G)110 mm 339.05 Thirty Nine and Four Rmt

, P.No.201 Paise

Providing and laying cement concrete 1:3:6 (1

Ch.05, Cement : 3 coarse sand : 6 hand broken stone Rupees Three Thousand

75.92 aggregates 40m.m. nominal size) and curring 3025.99 Twenty Five and Ninety Cmt

P.No.37 complete excluding cost of form work in : (a) Nine Paise

foundation and plinth

Ch.06, Brick work using common burnt clay conventional

Sr.No.2+6+7 building bricks for super structure having crushing Rupees Four Thousand

, strength not less than 35 Kg./Sq.Cm. in cement Five Hundred Thirty

.19B+6.2B , mortar 1:6 (1 cement : 6 fine sand) in super structure Eight and Forty Seven

P.No.64,65,6 above plinth level upto floor two level (conventional ) Paise

Providing and laying controlled cement concrete M-

Rupees Seven Thousand

200 and curing complete including the cost of form

68 R.A. 4.5 7785.08 Seven Hundred Eighty Cmt

work but excluding the cost of reinforcement for

Five and Eight Paise

reinforced concrete work in: (C) Slabs for First floor

Providing and laying controlled cement concrete M-

200 and curing complete excluding the cost of form

Rupees Six Thousand

work and reinforcement for reinforced concrete work

69 R.A. 1.656 6860.93 Eight Hundred Sixty and Cmt

in :(c) Slabs, Landings, Shelves, Balconies, Lintels,

Ninety Three Paise

Beams, girders and cantilever up to floor For Beams

Ch.17, Providing 15mm thick cement plaster in single coat

Sr.No.17002B on fair side of brick / concrete wall for interior Rupees Two Hundred

40.23 plastering upto floor two level & finishing with a 235.71 Thirty Five and Seventy Smt

17.69 + 17.94, floating coat of neat cement slurry (ii)C M 1:4 ( 1 One Paise

cement 4 sand) & For First floor.

Providing and laying controlled cement concrete M-

200 and curing complete including the cost of form Rupees Seven Thousand

work but excluding the cost of reinforcement for Three Hundred Fifty

reinforced concrete work in :(d) Columns, pillars, Three and Eighty One

posts and struts up to floor two level. for Columns Paise

C+1704+170 Providing 10 mm thick cement plaster on ceiling and

06, Rupees One Hundred

soffits of stairs upto floor two level, in cement mortar

72 I.No.17.58 + 15 198.94 Ninety Eight and Ninety Smt

17.69 + (1:4) (1 cement : 4sand) including neat cement

17.91 slurry.For First Floor

Providing and laying controlled cement concrete M-

Rupees Six Thousand

200 with curing etc. complete including the cost of

73 R.A. 4.9392 6161.00 One Hundred Sixty One Cmt

form work but excluding the cost of reinforcement

for R.C.C. work at Ground Floor (E) Stair Case

Providing and laying controlled cement M-250 and

curing complete including the cost of form work and Rupees Seven Thousand

74 R.A. 5.586 reinforcement for reinforced concrete work in :(B) 7222.51 Two Hundred Twenty Cmt

Walls from top of foundation level upto floor two Two and Fifty One Paise

Providing and laying chequred pre-cast cement tiles

22 mm,thick with aggregate of size upto 6 mm.In

Ch-14, floor,treads of steps and landing on 20 mm thick bed Rupees Five Hundred

33 of cement mortor 1:6 (1 cement : 6 coarse sand) or 545.76 Forty Five and Seventy Smt

P.123 lime Mortor,1:1:5 (1 Lime putty : 1.5 sand)jointed Six Paise

with neat cement slurry pigments to match the shade

Providing & laying M-20 grade c. c. curbing of size

600mmx450mmx75mm with curing etc. complete Rupees Six Hundred

76 R.A. 70 incl. the cost of form work but excluding the cost of 624.18 Twenty Four and Rmt

rainrorcement for road sides, etc. complete as per Eighteen Paise

Supplying of graded stone aggregate of following

sizes (for W.B.M. Road) (1) Hand broken stone

aggregate 25mm to 90mm size.Spreading the stone

aggregate for rolling and W.B.M. including filling the

Rupees One Thousand

interstices to required camber and gradient

77 R.A. 12.6 1269.57 Two Hundred Sixty Nine Cmt

(excluding spreading of Blindage0 (ii) 40mm to 63mm

and Fifty Seven Paise

size aggregates (H.B.) Rolling and consolidation of

soling including filling in depression which occur

during the process, with power roler 8 tonne to

Providing and fixing pre-cast Rubber Dye inter locking

concrete block 60mm thick with grade of concrete

Ch-14, M200 pnumatic compressed by mechanically pressed Rupees Seven Hundred

P.125 and as per approved design including 75mm Sand Six and Ninety Two Paise

layer for levelling and filling the joint with sand in

proper line and level etc complete.

Providing corrugated G.I. sheet of class-3 roofing &

600mm ridge fixed with glavanished iron J or L Hooks,

Rupees Seven Hundred

No. 150012 + Bolts and nuts 8mm diameter with bitumen and G.I.

25 757.81 Fifty Seven and Eighty Smt

limpet washer or G.I. limpet washer. filled with white

15.1+15.7, One Paise

lead complete excluding the cost of purlins, Rafters

and Trusses.(1) 0.80 mm thick sheet.

Earthwork for embankment including breaking clods,

Rupees One Hundred

Ch-26, dressing with all lead and lift (excluding watering and

80 30 177.91 Seventy Seven and Cmt

I.No.26.16 consolidation)(E) From Borrow area within 3.0 Km.

Ninety One Paise

Providing and fixing 3mm thick PVC sheets as

signange and display of health signs/information of

required size having retroreflective letters/design as

Rupees Six Hundred

81 Addi. 25 per requirement,fixing the same through approved 616.10 Each

Sixteen and Ten Paise

adhesive etc. complete work shall be carried out as

per instruction of Engineer-in-charge (Approved make

PVC foamed sheet only) (45 x 15 cms.)

Providing and fixing Village/Building name boards as Rupees Three Thousand

per standard I.R.C. type design of steel plate including Four Hundred Thirty

82 Addi. 3 3437.60 Each

painting lettering etc. complete with fixing in C.C. Seven and Fifty Nine

1:4:8 block with necessary excavation. Paise

Rupees Four Hundred

For Door and Window Design 1" th. Outer & Inner

83 Addi. 40.2 456.92 Fifty Six and Ninety Two RMT

line as per Type B Design Pattern

Rupees Two Thousand

44"x 44" Square Design Pattern Draw in 24"x 24"

84 Addi. 6 2617.92 Six Hundred Seventeen EACH

and Ninety Two Paise

Rupees Nine Thousand

NHM Logo (26"x 35") & Ayusman Bharat name size Two Hundred Twenty

85 Addi. 1 9223.32 EACH

18" Three and Thirty Two

Providing, fixing, testing and commissioning of ABC

type 6 Kg Fire Extinguisher Mono

Ammonium Phosphate Powder 50, Stored Pressure Rupees Two Thousand

86 Addi. 4 Type, Pressure Gauge, Controllable discharge 2434.10 Four Hundred Thirty Each

mechanism Class A Rating 3A & Class B rating 21B as Four and Ten Paise

per IS 15683 ISI MARK (ABC Dry Chemical Powder -

Providing and fixing, testing and commissioning of CO2 type

Fire Extinguisher of capacity 4.5 kg filled with Co2 Gas as per IS

Rupees Six Thousand

87 Addi. 3 15222 with controll discharge mechanis, fitted with Hose & 6009.50 Each

Horn applicable on Class B fire rating 21B confirms to IS 15683 Nine and Fifty Paise

bearing ISI mark. Co2 cylinder as per IS 7285 .

Providing, fixing, testing and commissioning of below Auto

88 Addi. 0 No Rupees Only

Emergency Exit 4” X 12”

Rupees Three Hundred

A Addi. 5 313.10 Each

Thirteen and Ten Paise

Fire Extinguisher 4” X 12”

Rupees Three Hundred

B Addi. 18 313.10 Each

Thirteen and Ten Paise

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in/ on surface on wall/ceiling

complete with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on Rupees Four Hundred

89 1-2-1(F). 85 PVC / Metallic box, single mounting base frame covered with 485.81 Eighty Five and Eighty Pt.

textured/metallic front plate modules erected on / in wall / One Paise

ceiling as per pipe erected, with necessary Lamp holder/ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete (Cat - III)

Point wiring for FAN with 2-1.5 sq.mm & earthwire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to

be erected concealed in / flushed on wall/ceiling complete

with 6A Modular type switch and hum free EME four or more

step type electronic fan regulator with separately mounted Rupees Six Hundred

90 1-2-2(F). 30 and accessories with earth continuity of following type 674.68 Seventy Four and Sixty Pt.

erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling

complete (Cat -III)

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of to be erected

concealed in / on surface of wall / ceiling complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic Rupees Five Hundred

91 1-2-3 (I) (f) 15 box covered with appropriate front plate modules erected on / 510.05 Pt.

Ten and Five Paise

in wall / ceiling as per pipe erected with following type of

accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (f) with

medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete(Cat -III)

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire (f) with medium Rupees Seven Hundred

92 1-2-3 (II) (f) 10 class Rigid PVC pipe and accessories erected concealed in 745.38 Forty Five and Thirty Pt.

wall/ceiling complete (Cat. III)

[III] For 16A Plug with 2-4 sq.mm Cu. Wire Rupees Eight Hundred

93 1-2-3 (III) (f) 3 (f) with medium class Rigid PVC pipe and accessories erected 871.63 Seventy One and Sixty Pt.

concealed in wall/ceiling complete (Cat. III)

Point wiring for Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic box, single mounting base Rupees Two Hundred

94 1-2-4. 30 frame covered with textured / metallic front plate modules 257.55 Fifty Seven and Fifty Five Pt.

erected on / in wall / ceiling with following type accessories Paise

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame Rupees One Hundred

covered with textured / metallic/white front plate , modules

95 1-2-6 (4) 2 160.59 Sixty and Fifty Nine Ea.

erected with necessary connections as per site situation

directed by Engineer In charge. (4) TV Co-axial Socket outlet

(7) Blank Plate Single Cat.III Rupees Twenty Five and

Twenty Five Paise

(8) Modem Jack for Computer Open RJ-45 Cat.III Rupees One Hundred

97 1-2-6 (8) 5 160.59 Sixty and Fifty Nine Ea.

Providing and erecting ISI mark Medium class RIGID PVC PIPES

of following size complete to be erected on/in wall or ceiling

erected with necessary PVC fittings & Junction boxes fixed with Rupees Thirty Three and

adhesive solution & Clamps with following dia of pipes, in Thirty Three Paise

approved manner as directed (b) 25 mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to

be erected concealed in /flushed on wall/ceiling, with 1.5 sq. Rupees Eighty Two and

99 1-4-1 (A) (b) 520 mm copper conductor FRLS PVC insulated stranded wire of 82.82 Mtr.

Eighty Two Paise

green colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq.

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with Rupees One Hundred

100 1-4-2(A) (a) 130 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire 112.11 Mtr.

Twelve and Eleven Paise

of green colour for earth continuity of following size (A) with

medium class Rigid PVC pipe and accessories(a) 2 wire 4 sq.

(h) 4 wire 6 sq. mm Rupees Two Hundred

101 1-4-2 (A) (h) 100 260.58 Sixty and Fifty Eight Mtr.

Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing pipe of Rupees Ninety One and

102 1-4-4 (f) 20 following size (Specifically for control panel, relays, power 91.91 Mtr.

Ninety One Paise

switchgears, motor starters & control wiring) with required

size of copper lugs, nuts and bolts if required. (f) One wire

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor made Rupees Thirty Nine and

of poly - Aluminium film bonded Al. Braids @ suitable coverage Thirty Nine Paise

overall sheathed with black PVC insulation. b).RG-6

Supplying & erecting approved make LAN cable of following

Rupees Seventy Six and

104 1-4-8 (D) 100 size in existing pipe as per direction [D] CAT - 6 e 76.76 Mtr.

Seventy Six Paise

Supplying & erecting M.S. Box having 16 Gauge painted with

red oxide or Heavy duty PVC box erected flushed on wall or

Rupees Forty Seven and

105 1-5-1 (a) 8 concealed in wall with necessary plastering & finishing as 47.47 Ea.

Forty Seven Paise

directed of following size. (a) 100 mm x 100 mm x 75 mm(d)

Providing & erecting Switch board for Computer or electric

apparatus consisting of following items in single board erected

on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Rupees One Thousand

Acrylic sheet erected as directed One Hundred Thirty

106 1-6-2 (B). 5 1 no. 6A/16A universal plug-switch combined. 1133.22 Ea.

Three and Twenty Two

4 nos. 6A Switch

4 nos. 6A 5 pin Plug Paise

[B] For Modular Type Accessories (Cat - II) Havell's, RRkable,

Avocab, Allcab, Finolex, Darshan

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of co-extruded

polycarbonate channel with diffuser part in needed opal finish

with company mark/name 160V to 270V, Power Factor more

than 0.9, THD < 15%,

CCT 3000 K to 6500K, Rupees One Hundred

107 2-15-1 (A) (i) 15 Luminaire efficacy> 85 lumens/watt ,LED 165.64 Sixty Five and Sixty Four Ea.

LED driver efficiency > 85 % Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet (Cat

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet (Cat-Ill)

Rupees Three Hundred

45 373.70 Seventy Three and Ea.

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD < Rupees Five Thousand

2-16-2 (A) 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

8 5976.17 Nine Hundred Seventy Ea.

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

Six and Seventeen Paise

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iii) Above 60 to 90 watts

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to 100A. with Fixed Rupees Six Thousand

110 3-4-1. 2 thermal & magnetic release suitable to work on A.C. supply 50 6173.12 One Hundred Seventy Ea.

c/s. with all internal connections, spreader tinned copper & Three and Twelve Paise

complete erected in existing 16 G.M.S. housing ICS=100% of

ICU only (Cat III)

Providing and erecting Approved make Four pole moulded case

circuit breaker having breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with Fixed thermal & Rupees Eight Thousand

111 3-4-2. 1 magnetic release suitable to work on A.C.supply 50 c/s. with all 8055.76 Fifty Five and Seventy Ea.

internal connections, spreader tinned copper & complete Six Paise

erected in existing 16 G.M.S. housing. ICS=100% of ICU only

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte

bus having current density not more than 1.6 Amp. / sq.mm

(Rated current / cross section area) duly wrapped with colour Rupees One Thousand

insulating tape for phase sequence of following current Rn.Mt

112 3-8-2 (A) 0.5 1961.42 Nine Hundred Sixty One

carrying capacity, erected with necessary bus bar supports r.

/insulators, main cable socket to each bar, erected in existing

and Forty Two Paise

cubical panel with necessary connections. (A) Suitable for

Miniature circuit breaker single pole 6A to 32A suitable to

operate on 240 V A.C. system and having breaking capacity 10 Rupees One Hundred

KA to be erected in existing box. confirming to IS 8828/1996 Twelve and Eleven Paise

with ISI Mark (Cat.III)

Providing & erecting 415V MCB Four Pole Switch for Lighting Rupees Six Hundred

Load (B curve) having 10KA breaking capacity & confirms to IS

114 3-10-4 (B) 2 638.32 Thirty Eight and Thirty Ea.

:8828 in existing box having following capacity (b)40 Amp.

(Cat.III) Two Paise

Providing & erecting 240 V MCB double pole switch for motor Rupees Three Hundred

& inductive load (C Curve) having 10 KA breaking capacity &

115 3-10-2 (B) 2 330.27 Thirty and Twenty Ea.

confirms to IS : 8828 in existing box having following capacity

(B) 40 Amp. (Cat III) Seven Paise

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate nos. of Rupees Three Thousand

2 MCBs.(The DBs should be used of same company of MCB to be 3412.79 Four Hundred Twelve Ea.

used) suitable for (B) three phase incoming and single phase and Seventy Nine Paise

horizontal type outgoing Per phase isolation type (PPI) (b)

sheet steel double door (IP-43) (iii)8 way

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on Rupees Two Thousand

single phase 240 V,50Hz. having characteristic of quick action

117 3-12-1 (ii) 6 2235.13 Two Hundred Thirty Five Ea.

& tripping with all advance feature & do not incorporate any

electronic component. for following Max. rating erected as

and Thirteen Paise

directed (ii) 40Amps. DP (Cat III)

Providing and erecting Annealed bare Copper wire 8 to

SWG. Rupees Seven Hundred

118 3-14-4. 2 794.87 Ninety Four and Eighty Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm

size approved make Safe Earthing Electrode consisting Pipe-in-

Pipe Technology as per IS 3043-1987 made of corrosion free

hot dipped G.I.Pipes having Outer pipe dia of 80 mm having

80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate

Rupees Five Thousand

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the Eight Hundred Forty

value of earthing resistane mentioned in test Certificate) & Two and Eighty Five

having back filling compound of (B) Inner chemical (CCM Paise

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V

Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board

having IP-64 protection made from 14 SWG thick CRC M.S.

sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary supporting angles, flats

including cutting, bending, drilling, welding, riveting with

internal partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of supplied

switch gears, BUSBARS, with suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets,

rib, bakelite control fuses for measuring instruments, earth Rupees Fourteen

120 3-16-1 (B) (i) 1 bus & earth bolts, foundation flange - bolts-base Plates, 14902.55 Thousand Nine Hundred Sq.Mtr

sufficient nos. of hinged doors, handles with locking

Two and Fifty Five Paise

arrangement and rubber gasket complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the

cost of switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.(B)

The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory (i) with 350mm depth

Supplying & erecting approved make Four Pole 415V change

over switch interior for panel mounting with operating Rupees Seven Thousand

121 3-6-8(C). 1 mechanism A.C.23 duty confirming to IS for (C)100-125A 7790.13 Seven Hundred Ninety Ea.

and Thirteen Paise

Supplying and erecting approved make panel mounting type Rupees One Thousand

Digital Voltmeter having 3 digits LED display, 0 to 750 AC Volts

Two Hundred Seventy

122 9-2-2. 1 range erected on existing panel board with all connection, 1275.63 Ea.

Five and Sixty Three

wiring etc .with manufacturers calibration certificate.

Supplying and erecting approved make panel mounting type

Digital Ammeter having 3 digits LED display, external CT Rupees One Thousand

operated, calibrated for 0 to 1000 Amps suitable to operate on

123 9-2-4. 1 1558.43 Five Hundred Fifty Eight Ea.

500 Volt AC , erected on existing panel board with all

connection, wiring etc .with manufacturers calibration and Forty Three Paise

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

Aluminium conductor for 1.1 KV. to be laid on wall with Rupees Seventy Nine

necessary clamps or in existing trench / pipe of following size and Seventy Nine Paise

of cables. (A) 2 core 4 Sq. mm

Providing & erecting Approved make Power Saving 50 Watt Rupees One Thousand

Ceiling Fan with double ball bearing ISI mark with Condenser

Nine Hundred Forty

125 5-1-6. 30 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades 1948.29 Ea.

Eight and Twenty Nine

with aluminium blades with , canopy & 30 cm. down rod

erected with earthing. Paise

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and

Rupees One Hundred

126 5-2-3. 30 pierced through a 16 Gauge M.S. box / Heavy Duty PVC box 108.07 Ea.

Eight and Seven Paise

complete erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan Rupees Eighteen and

127 5-2-5. 30 hook or Fan box. 18.18 Ea.

Supplying & erecting approved make low noise decorative

exhaust fan having square frame ABS body with inbuilt lowers Rupees One Thousand

128 5-3-3. 8 & square frame. 200mm with 1350RPM (Cat.II) 1703.87 Seven Hundred Three Ea.

and Eighty Seven Paise

“ B ” class Galvanised iron pipe having smooth finished bore of Rupees Two Hundred

the pipe on both ends erected nuts and bolts along the pole /

129 6-5-5 (c) 8 249.47 Forty Nine and Forty Mtr.

wall shaping the pipe as per site requirement. Pipe dia as

following. (c ) 40 mm dia. Seven Paise

Providing and erecting water cooler having storage capacity

80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp

of 45˚ C. The outlet temp. of the water should drop by 15˚ C Rupees Forty Nine

within a hour, The water cooler should be comprising of Thousand Five Hundred

130 8-13-1. 1 hermetically sealed compressor, fan motor, condensing unit, 49559.69 Ea.

Fifty Nine and Sixty Nine

water tank surrounded by evaporating coil, thermostats, relay

etc. complete with necessary inlet & outlet connection. The Paise

body of water cooler will be made from Stainless Steel. ◦

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter

housing with 'O' ring presediment filter GAC filter, carbon filter Rupees Twenty Nine

suitable buster DC pump capacity 80 psi, mention with 40 psi Thousand One Hundred

inline type post carbon filter auto low & high pressure switches Eighty Seven and Ninety

with following size of storage tank & LPH capacity & erected as Nine Paise

directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump

Supplying and erecting horizontal / vertical mounting type

storage water heater with copper container/Glasslined Coated

Inner Tank/Polymer coated tank housed in M.S./S.S. body

insulated with glass wool / puff complete with heating Rupees Nine Thousand

132 8-16-2 (B) 1 elements,Rated Pressure 7/8 bar, adjustable thermostats 30 9513.19 Five Hundred Thirteen Ea.

Degree C to 85 Degree C, indicating lamp, safety valve, fusible and Nineteen Paise

plug, etc.complete erected with coach bolts, nuts. washers &

(B)15 Ltr-.with 2 K.W. heating element Premium Category

Supplying and erecting approved make suitable panel indicator Rupees Forty Three and

133 9-2-9. 3 LED type lamp, lens cover, complete 43.43 Ea.

Forty Three Paise

Providing & erecting open well type horizontal mono block

pump set with stainless steel body having following Rupees Nine Thousand

specification. (C) 1 H.P. single phase open well motor pump set

134 9-4-1 (C) 2 9613.18 Six Hundred Thirteen Ea.

suitable for 185 LPM discharge @ 25 mtr. head, suitable for

mm dia. Delivery pipe with control panel. (Cat II)

and Eighteen Paise

Lowering of submersible motor pump set complete with

required. Nos. and size of casing pipes erected by means of

proper chain pulley block & pipe wrenches after checking of Rupees One Thousand

135 9-6-18 (A) 2 threads of each pipe with coupling to take the load of the 1711.95 Seven Hundred Eleven Job

pump set and pipe assembly filled up with water. (b) Upto 60 and Ninety Five Paise

Providing and erecting ISI marked PVC insulated PVC Sheathed

Flat flexible Submersible copper cable approved make of Rupees Sixty Five and

following Size. Sixty Five Paise

(a) 3 Core x 1.5 Sq. mm.

Providing Water proof straight Joint in PVC insulated flat Rupees One Hundred

flexible copper cable by using insulating material, water

137 9-7-2 (A) 1 189.88 Eighty Nine and Eighty Ea.

proofing material, & making the joint complete. (A) Up to

Sq. mm Eight Paise

For getting New 3 phase power supply connection & Energy Rupees Twenty

meter from power supply co. Including Accessories, wire,

138 F.Q 1 20200.00 Thousand Two Hundred Ea.

preparation, load wire, Liasion etc. (up to 50 mtr) (up to 6 KW)

Rupees One Crore Twenty Eight Lac Seventy Nine Thousand Nine Hundred Eleven and One Paise

I / We am / are willing to carry out the work at

percent ( Should be written in figures and words) of the Estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated Amount put to tender.

1 All work shall be carried out as per Public Works Department Handbook and other specifiations of Division or as directed.

2 All the column is Schedule should be filled in ink and the entries in the last column should be struck by the cotractor under his signature.

Rates quoted include clearance o site (prior commencement of work and at its close) in allrespects and hold good for work under all conditions,

site, moisture, weather etc.

Serviceble material available (if any) after Demolishing / Dismentalling any item should be hand over o the concerned PIU Site Engineer In

Signature of the contractor with seal: Signature of the Contracting Authority with seal: