8583/E8

Amount

Demolition of cement concrete in ground floor and paving nexc 15 cm thick (below or above ground level) and removing rubbish off the premises all as specifed and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.laid, bedded and pointed in any mortar and removing rubbish off the premises all as specified and directed.

Demolition of concrete block walling, RR masonary in cement mortar including all quoins archas pillars etc and removing rubbish off the premises all as specifed and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for key scrubbing down with water and removing rubbish off the premises all as specifed and directed.

Dismantling plain or corrugated steel sheeting of any gauage/ thickness including Nainital and similar pattern all as specifed and directed.

Dismantling of ceiling board /wall panelling of any thickness and of any description including cover fillets all as specifed and directed.

Dismantling of frame work timber in scantling 40 sqcm and over in section in any position all as specifed and directed.

Dismantling of timber in fillets under 40 sqcm in section all as specifed and directed.

Taking down chowkat or frame with shutters (with out taking of shutter from the frame) area exc 1.5 sqm but nexc 4sqm each all as specifed and directed.

Taking down chowkat or frame with shutters (with out taking of shutter from the frame) area exc 1.5 sqm each all as specifed and directed.

Taking down shutter area exc 1 sqm but nexc 2 sqm each all as specifed and directed.

Taking down shutter area nexc 1 sqm each all as specifed and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specifed and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specifed and directed.

Dismantling water tank and removing to store of capacity exc 250 but nexc 500 litres all as specifed and directed.

Dismantling water tank and removing to store capacity exc 500 but nexc 1000 litres all as specifed and directed.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of 25 mm thick as in leveling course, finished surfaces even and rough to receive floor finish all as specifed and directed.

M&L PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L Non skid ceramic coloured tiles (300x300)x7 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 all as specifed and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of motar 15 mm thick in cement mortar 1:6 all as specifed and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles all as specifed and directed.

M&L vitrified coloured ceramic tiles 600x600x9/10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including laid over screed bed or bedding layer of mortar 15 mm thick in cement mortor 1:6 all as specifed and directed.

M&L vitrified coloured ceramic tiles 600x600x9/10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering in CM 1:4 as in backing coat of tiles all as specifed and directed.

M&L glazed ceramic coloured tiles of size 300x200 x7mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 as a backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specifed and directed.

M&L glazed ceramic coloured tiles of size 350 x 250 x 7mm or 450 x 350 x 7mm thick laid over and ncluding 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles all as specifed and directed.

M&L machine cut kota stone slab flooring 20-25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shades of the slab including rubbing and polishing including 20 mm thick screed bed in cement mortar 1:6 all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) as in floor, finishing cement concrete surface even and smooth without using extra cement. all as specified and directed.

Suply only glass dividing strips 3 mm thick and 38 mm wide and inserted in position to confirm design all as specified and directed.

M&L providing 75 mm thick PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection all as specified and directed.

M&L prepolished chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floor with grey cement and pigment and including laid over screed bed or bedding layer of mortar 20 mm thick laying floor finishes in cement mortor 1:6 all as specified and directed.

M&L pre-cast cement concrete block masonary 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) with solid block exc 10 cm in width and set in CM 1:6 all as specifed and directed.

M&L walling of random rubble uncoarsed as well bonded bedded and solidly hearted built in CM 1:6 all as specifed and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in coping including form work all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:6 on fair faces of brick or cement concrete surfaces, finished surfaces even and smooth without using extra cement all as specifed and directed.

M&L 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or cement concrete surfaces, finished surfaces even and smooth without using extra cement all as specifed and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil emulsion distemper over a coat of primer all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of suitable primer all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought framed rebated on the solided rounded or chamfered, put together with glue pinned at joints all as specified and directed.

S&F 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both side all as specified and directed.

S&F 35mm thick IInd class hard wood glazed and skelton door shutter divided into square, open rebated and prepared to receive glass/gauge etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) all as specified and directed.

S&F solid PVC door frame of size 50X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening all as specified and directed .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bootom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification all as specified and directed.

S&F bands, straps, supports or stays for rain water, hooks (stay) heavy for large gates, hook and pintole hinges, clamps, hold fasts, hooks for hanging james and similar small articles Fe-410-0 or Fe-310-0 all as specifed and directed.

S&F steel window with side hung shutters including projecting with box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed.

S&F steel windows with side hung shutters including projecting with box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5 metre clear span, cills, steps, seismic and other similar articles, bed plate, copings & hold fast including form work all as specifed and directed.

S&F anodised aluminum section for making doors, windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading all as specified and directed Note :- Glazing, rubber beading, hinges etc shall be measured and paid separately.

M&L rubber beading for fixing glass panes in aluminium frame work all as specified and directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/aluminium frame work all as specified and directed.

S&F 4.8 mm thick tinted sheet glass, fixed to aluminum frame work in panels nexc 0.5 Sqm each pane all as specified and directed.

S&F butt hinges of stainless steel 100mm size all as specifed and directed.

S&F butt hinges medium weight cold rolled mild steel 100mm all as specifed and directed.

S&F mild steel butt hinges 75mm long each all as specifed and directed.

S&F 200 mm aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 150mm long anodised extruded aluminium alloy handles, fabricated type all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified and directed.

S&F in repair floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size) all as specified and directed.

S&F in repair 150 mm aluminium, anodised, barrel tower bolts of extruded section all as specified and directed.

S&F in repair 150mm long anodised extruded aluminium alloy handles, fabricated type all as specified and directed.

S&F in repair for door closer hydraulically regulated aluminum (dia cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and directed.

S&F in repair for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate mild steel all as specified and directed.

S&F 0.56 mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple all as specifed and directed.

S&F in repair 0.56mm nominal dia wire galvanised mild steel wire cloth and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple all as specifed and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or driling out old glazing pins/spring clips and providing and fixing new ones all as specifed and directed.

S&F 3 mm thick sheet glass ordinary qauality and glazing with oil putty in square nexc 0.5 sqm in each pane all as specified and directed.

M&L preparation of old decorated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on roof all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint on roof over a coat of red oxide primer all as per specified and directed.

M&L preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

M&L preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specifed and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mmx600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing in position for light fixture etc all as specified and directed.

S&F false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid all as specified and directed.

S&F in repair 20 mm dia chromium plated pipes for curtain rods all as specified and directed.

S&F in repair for Chromium plated brackets and knobs for curtain rods complete all as specified and directed.

S&F 15mm bore GI tubing medium grade with all fittings fixed to wall and ceiling or laid in floor all as specifed and directed.

Re-fixing 15mm bore old steel tubing and connection in new or old position (wall, ceiling, floor etc) all as specifed and directed.

S&F 20 mm bore GI tubing medium grade with all fittings fixed to wall and ceiling or laid in floor all as specifed and directed.

Re-fixing 20 mm bore old steel tubing and connection in new or old position (wall, ceiling, floor etc) all as specifed and directed.

S&F rotational moulded polyethylene water storage tanks of 500 litres capacity (cylindrical or vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule all as specifed and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical or vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule all as specifed and directed.

S&F 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor including taking down all as specifed and directed.

S&F PVC (SWR) bends of any radius 110mm bore pipe including taking down all as specifed and directed.

S&F in repairs 75 mm bore PVC (SWR) pipe single socketed of any length with rubber ring joints laid in trenches or in floor including taking down all as specifed and directed.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S&F in repair vitreous china wash hand basin (550X400mm) white, flat back excluding taps, waste chain and plug and porcelain stopper but including brackets all as specifed and directed.

S&F in repair 32mm bore waste fittings brass chromium plated for glazed stone ware sinks basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and othter end fixed all as specifed and directed.

S&F in repair 15mm bore dia fancy type pillar taps cast copper alloy with capston head chromium plated screwed down high pressure with or with out lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe all as specifed and directed.

S&F in repair 10 litres capacity PVC valve less syphonic action type flushing cistern low level white inlet ball valve, float, flush pipe and handle including brackets all as specifed and directed.

S&F in repair PVC connection 15mm dia and 600mm long all as specifed and directed.

S&F in repair PVC waste pipe 32mm dia all as specifed and directed.

S&F in repair soap dish acryrlic type 138X102X75mm all as specifed and directed.

S&F in repair for sink with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and waste incluing bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connectings union to pipe overall size 915mmx460mm and bowl size 410mmx330mmx160mm all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern size 580x440mm with white integral footrest (excluding flushing cistern and flush pipe including making good) all as specifed and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolt, flushing cistern and flush pipe) including making good disturbed portion all as specifed and directed.

S&F in repair plastic water closet seat, black and white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specifed and directed.

S&F in repairs CP grating of size 100mm dia all as specifed and directed.

S&F in repair 15mm bore brass chromium plated wall mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall all as specifed and directed.

S&F in repair 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to wall all as specifed and directed.

S&F in repair 15 mm bib tap CP fancy type with crutch or butterfly handle screwed down for iron pipe or for brass ferrules all as specifed and directed.

S&F in repair 15mm bore chromium plated brass, fancy type, angle cock screwed for iron pipe or union and fixed all as specifed and directed.

S&F in repair 15mm bore chromium plated brass, fancy type 2-in-1 angle cock screwed for iron pipe or union all as specifed and directed.

S&F in repair for 15mm dia stop valves, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union all as specifed and directed.

S&F in repair 15mm dia bib taps standard of PTMT of any colour high pressure screwed for iron pipe (minimum weight 90 gms) all as specified and directed.

S&F in repair 15mm dia stop cock standard of PTMT any colour high pressure screwed for iron pipe (minimum weight 90 gms) all as specified and directed.

S&F in repair CP towel rail of 20mm dia with hook 600mm long all as specifed and directed.

S&F in repair CP telephonic shower rose all as specifed and directed.

S&F in repair vitreous china bowl urinal flat back of size 465X355X265 mm white (minimum) with grating and union for discharge pipe including flush pipe and waste pipe (excluding flushing cistern) all as specified and directed .

S&F 15mm dia CP jet with CP flexible pipe 90cm long including necessary fittings all as specified and directed .

S&F 15mm bore Health faucet with CP felxible pipe of 90cm long including necessary fittings all as specified and directed .

M&L 16-18mm thick granite slab on top of cooking plateform and bar counter including cutting polishing rounding on edges, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:4. including grinding and polishing all as specified and directed.

Jahori Singh Pokhriyal