REPAIRING AND RENOVATION OF LATE SHREE AMRUTBHAI MAGANLAL PATEL PARTY PLOT AT T.P.S. NO.11 RAKHIAL , F.P. NO.85/P IN SARASPUR-RKHIYAL WARD, NORTH ZONE, AHMEDABAD (RE-INVITE)

Name of Work:- REPAIRING AND RENOVATION OF LATE SHREE AMRUTBHAI

MAGANLAL PATEL PARTY PLOT AT T.P.S. NO.11 RAKHIYAL , F.P.

NO.85/P IN SARASPUR-RAKHIYAL WARD, NORTH ZONE,

Bill of Quantities

I. No. Qty Items Unit Rate Per Amount

Civil Work Estimate

1 Demolition & Dismantling work

Demolition of RCC work using Hydra

Breacker including stacking of servicable

materials and disposal of unservicable

materials with all lead and lift.Removal Of

Existing Building Foundation and Super

Structure If Any.

Demolition of Brick work and stone masonry

including stacking of serviceable materials

and disposal of unserviceable materials with

all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building

Foundation and Super Structure If Any.

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

c serviceable materials and disposal of

unserviceable materials with all lead and lift.

i 2 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 2 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including

d 2500 distempering and stacking the materials 3.63 Kg.

with all lead and lift.

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, hold fasts and other attachment

e 20 185.85 Each

etc. complete and stacking them with in all

lead and lift. (i)Notexceeding 3 Sq.M. in

Removing & Scrapping of Old deteriorated

Plaster of any thickness from Masonary /

R.C.C. member including stacking of

serviceable material & disposal of un

serviceable from site of work with all lead &

Dismentaling any type tiled of stone floors

laid in mortar including stacking of

g 1350 serviceable materilas and disposal of 47.25 Sq.M.

unserviceable materials with all lead and lift.

Excavation for foundation including sorting

out stacking of useful material & disposing of

2 excavated stuff upto 50 mt. lead. Loose &

Soft soil.Excexuted With Mechanical Effort

a 517 up to 1.5 mt. depth 115.92 Cu.M.

c 139 3.0 to 5.0 mt. depth 141.11 Cu.M.

Add extra for Disposing off the excavated

d 100 stuff of above items for lead of (A) 50 m to 17.28 Cu.M.

Add extra for Disposing off the excavated

e 100 stuff of above items for lead of (B) 100 m to 34.56 Cu.M.

Providing and installing cast in situ single

under reamed piles of specified diameter

and length below pile cap, excluding the cost

of Concrete, steel reinforcement but

f including the cost of boring with bentonite

solution and the length of the pile to be

embedded in pile cap etc. all complete.

(Length of pile for payment shall be

measured upto to the bottom of pile cap) :

i 10 400 mm dia. Piles 644.63 Rmt.

ii 10 450 mm dia. Piles 705.03 Rmt.

Extra over single under ream for providing

additional bulbs in under reamed piles,

g under specified diameter excluding the cost

of Concrete, steel reinforcement (only the

nos. of extra bulbs are to be paid).

i 1 400 mm dia. Piles 813.05 Each

ii 1 450 mm dia. Piles 1103.43 Each

Provdg. & laying cement concrete 1:5:10 (1

cement : 5 course sand : 10 hand broken

3a 1 aggregates 40 mm nominal size) and curing 2492.51 Cu.M.

complete, excluding cost of form work in

foundation & Plinth.

Provdg. & laying cement concrete 1:3:6 (1

cement : 3 coarse sand : 6 hand broken

3b stone aggregates 40 mm nominal size) and

curing complete excluding cost of form work

161 (A) Foundation and plinth 2976.00 Cu.M.

Supplying of graded hand brocken stone

3c 2 size of 90 mm to 127 mm at site (Rubble or 983.93 Cu.M.

Labour charges for spreading the spouls

mm to 127 mm thick layer good earth filling

in voids correcting the grade & camber

comp. with rolling, watering, incl. preparing

thesurface by brushing for removing all

loose or dirts ect.comp.

Provdg. & laying cement concrete 1:4:8 (1

cement : 4 coarse sand : 8 hand broken

4 5 stone aggregates 40 mm nominal size) and 2653.67 Cu.M.

curing complete excluding cost of form work

in foundation& plinth.

Filling available excavated earth (excluding

rock) in trenches, plinth, sides of foundations

5 1000 etc. in layers not exceeding 20 cm. in depth 129.10 Cu.M.

consolidation each deposited layer by

ramming and watering.

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

6 excavated rock, fly ash, aggregate of any

kind etc. comp. upto 5 km lead.

a 100 Conveyance charges upto 1 km 320.20 Cmt

b 100 Conveyance charges upto 2 km 347.73 Cmt

c 1500 Conveyance charges upto 5 km 408.41 Cmt

Extra For Lead on Above Item Above 5 km &

d 1500 upto 6 km 9.26 Cmt

Extra For Lead on Above Item Above 6 km

e 1500 & upto 7 km 9.26 Cmt

Extra For Lead on Above Item Above 7 km &

f 1500 upto 8 km 9.26 Cmt

Extra For Lead on Above Item Above 8 km &

g 1500 upto 9 km 9.26 Cmt

h 1500 Extra For Lead on Above Item Above 9 km 9.26 Cmt

Filling in plinth with sand under floors

7a 10 including watering, ramming, consolidating, 455.63 Cu.M.

compacting and dressing etc. completed.

Filling in foundation and plinth with murrum

or selected soil in layers of 20 cm. thickness

7b 70 including watering, ramming and 286.20 Cmt

consolidating etc. Complete.

Brick work using common burnt clay building

bricks having crushing strength not less

8 than 35 kg/Sq. cm. in cement mortar 1:6 (1

cement : 6 fine sand) conventional brick

a 91 (a) in foundation & Plinth 3981.21 Cu.M.

b 95 Super structure Upto Floor Two Level 4253.46 Cu.M.

I.Half brick masonry in common burnt clay

building bricks having crushing strength note

less than 35 Kg/Sq. Cm. in cement mortar

1:4 (1 cement : 4 coarse sand) using

conventional brick in Super structure upto

floor Four level

a 25 All Floor Level 646.70 Sq.M.

Providing and laying controlled cement

concrete of M-25 Grade and curing

complete, Excluding the cost of form work,

Scaffolding, cost of reinforcement for

reinforced concrete work For any Height up

to any FloorLevel.

a 113 Foundations,Raft,Footings,Mass concrete 4238.04 Cu.M.

b1 33 RCC Retaining wall at All Floor 4519.88 Cu.M.

Tie-Beam, Lintel , Beam- Bracket, Stair

Case & Landing, Coping ,Slab, balcony,

weather shed, loft , any cantilever etc All

d1 17 Columns,Pillars, posts and struts at All Floor 4593.91 Cu.M.

Providing and laying controlled cement

concrete of M-20 Grade and curing

complete, Excluding the cost of form work,

Scaffolding, cost of reinforcement for

reinforced concrete work For any Height up

to Floor Four Level.

a 1 Foundations,Raft,Footings,Mass concrete 3977.88 Cu.M.

Tie Beam , Lintel , Beam- Bracket , Coping

b1 9 ,landing, Slab, balcony, weather shed, loft , 4460.36 Cu.M.

any cantilever etc at All Floor

c1 1 Column at All Floor 4558.20 Cu.M.

d1 1 Stair Case All Floor 5418.91 Cu.M.

Providing and laying in position Ready

Mixed M250 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for all lead having continuous

agitated mixer, manufactured as per mix

design of specified grade for reinforced

cement concrete work including pumping of

10.3 10 R.M.C. from transit mixer to site of laying 4853.56 Cu.M.

with all lead and lift, excluding the cost of

centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete,

improve workability without impairing

strength and durability as per direction of the

Engineer - in charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be

Providing and laying in position Ready

Mixed M200 grade concrete for reinforced

cement conctere work , using cement

content as per approved Design Mix

manufactured in fully automatic batching

plant and transported to site of work in

transit mixer for all lead having continuous

agitated mixer, manufactured as per mix

design of specified grade for reinforced

cement concrete work including pumping of

10.4 5 R.M.C. from transit mixer to site of laying 4793.10 Cu.M.

with all lead and lift, excluding the cost of

centering shuttering finishing and

reinforcement including cost of admixtures in

recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete,

improve workability without impairing

strength and durability as per direction of the

Engineer - in charge. Without Fly Ash (Min

cement level as per latest IS 456 shall be

Drilling suitable holes in reinforced or plain

cement concrete with power driven drill

machine to a minimum depth of 80mm upto

250mm in RCC beams, lintels, columns and

slabs to introduce steel bars for

sunshades/balconies including fixing the

steel bars in position using Hilti Chemical

HY200-R but excluding the cost of

reinforcement, all complete as per direction

of Engineer-In-Charge.

8 mm Dia in 80 mm Deep & 12 mm Dia

a 20 183.52 Each

10 mm Dia in 100 mm Deep & 14 mm Dia

b 20 263.66 Each

12 mm Dia in 120 mm Deep & 16 mm Dia

c 20 343.80 Each

16 mm Dia in 160 mm Deep & 20 mm Dia

d 20 608.63 Each

20 mm Dia in 200 mm Deep & 25 mm Dia

e 5 1024.44 Each

25 mm Dia in 250 mm Deep & 32 mm Dia

f 5 1938.54 Each

Providing and laying controlled cement

concrete 1:2:4( 1cement : 2 coarse sand :

Graded stone aggregate 20 mm nominal

size ) and curing complete, Excluding the

cost of form work and reinforcement for

reinforced concrete work in:

Foundations, footings, base of

a 1 columns,grade slab and mass concrete. 3923.53 Cu.M.

slab, landing shelves, Balconies, lintels,

b 1 beams, girders, and cantilever, up to aany 4012.47 Cu.M.

P/A Trimix with dewatering machine and

floater machine on constructed R.C.C. work

c 40 54.00 Sqmtr

incl. cost of machine and labour etc. comp.

Making 15 mm Groove in R.C.C work on

road and filling it with poly sulfied selant and

finished it good incl. all labour charges etc.

comp. as directed

Providing and laying and fixing 25 mm thick

expansion joint by hydrocell semi rigid UV

e 2 resistance with high performance laminated 738.13 Sqmt

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

Providing form work in ordinary timber

planking so as to give a rough finish

including centering, shuttering, strutting and

propping etc. height of propping and

centering below supporting floor to celling

not exceeding 4 M & removal of the same

for in situ reinforced or plain concrete work

(A) Foundation, footings, bases of columns

a 144 etc. and mass concrete. 171.68 Smt

(B) Flat surface such as soffits of slabs,

b 100 landing and the like 252.00 Smt

(C) Vertical surfaces such as walls (any

c 332 thickness) partitions. 229.95 Smt

(D) Columns, pillars, posts & struts.

d 279 (1) Square, rectangular, polygonal in plan 297.68 Smt

e 10 (2) Circular or curved in plan. 422.10 Smt

(H) (1) Sides and soffits of beam,

haunchings cantilevers, girders, bressumers,

Coping and lintels not exceeding 1 M in

(2) Sides and soffits of beam, haunchings

g 5 cantilevers, girders, bressumers and lintels 259.88 Smt

exceeding 1 M in depth.

(L) chullah hoops, weather sheds, chhajas,

h 5 carbels etc including edges. 155.78 Smt

(M) Staircase with-sloping or stepped soffits

i 2 incl. risers & strings excluding landing. 242.55 Smt

Extra for additional height of propping and

centering where the height of propping and

centering exceeds 4 .O M between

j 5 supporting floor to ceiling including 386.48 Smt

temporary brick or stone pillars for

supporting as required. (i)Height more than

4.0 M.and upto 5.0 M.

Providing T.M.T Fe 500D bar reinforcement

for R.C.C. work including bending, binding

and placing in position complete up to any

a 20713 All Floor Level 75.46 Kg.

Providing and laying polished Kota stone

slab (Polished / River Finish, Green colour )

flooring over 20 mm. (average) thick base of

14 270 cement mortar 1:6 (1 cement : 6 coarse 982.83 Sq.M.

sand) or lime mortar 1:1.5 laid over and

joined with grey cement slurry including

rubbing and polishing complete.25 mm th.

Providing and laying polished Kota stone

slab 25 mm. thick in Platform ,Riser of Stair

Skirting, Tread , dado and pillars laid on

15 49 mm. thick cement mortar 1:3 (1 cement : 3 1176.03 Sq.M.

coarse sand) jointed with grey cement slurry

including rubbing and polishing and MAking

groove where it is Required etc. compl

Providing and laying white/Colur glazed tiles

6 mm thick in flooring treads of steps and

16 2 landing laid on a bed of 12 mm thick cement 908.17 Sq. M.

mortar 1:3 (1 cement : 3 coarse sand)

finished with flush pointing in white cement.

Providing and layingWhite / Colour glazed

tiles of size 600 mmx300mm x 8 mm /

mmx 450mm x 8 mm in skirting, risers of

steps, Floor and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

Providing and laying marble stone slab

flooring over 20 mm. (Average) base of

cement mortar 1:6 (1 cement: 6 coarse

18 1 sand) or L.M. 1:1.5 laid and jointed with grey 2194.63 Sq. M.

cement slurry including rubbing and

polishing complete: (A) Marble slab 25 mm.

Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in flooring treads of

steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in

Providing and laying Vitrified tiles 8 to

mm thick , 24'' x 24'' in skrting risers of steps

19b 552 and dedo on 10mm thick cement plaster 1:3 1130.15 Sq. M.

(1cement : 3-coarse sand) and jointed with

white cement slurry

P & L 24" x 24" vitrified 8 mm thick tile

flooring over 20 mm (average) base of

cement mortar 1:6 ( 1cement: 6 coarse

sand) on new surface or fixing on existing

19c 84 flooring by adhesive material including 1383.99 Sq.M.

dismentaling of existing flooring and jointed

with color cement slurry including finised

with flush pointing & cleaning the surface

etc. complete for Antiskid

Providing and Laying Tactile Tile (For Vision

Impaired Persons as per Strandards) of Size

300x300x9.8 mm Having with Water

Absorption less than 0.5% and Confirming to

is:15622 of Approved Make in all Colours

and Shades in for Outdoor floors such as

19d 80 footpath, Courtyard, Multi models Location 1663.72 Sq. M.

etc., laid in 20 mm Thick Base of Cement

Mortar 1:4 ( 1 Cement : 4 Course Sand) in

all Shapes & pattern including Grouting the

Joints with White Cement mixed with

Matching pigment etc. Complete as per

Direction of Engineer-in-charge.

Providing and laying Ceramics tiles 6 to

mm thick in flooring, treads of steps, landing

20 5 and dedo on 12 mm. thick cement plaster 960.47 Sq. M.

1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

Providing & Laying 18 mm thick Mirror polish

granite For flooring , counter , stair riser

tread , skirting , dedo , Jambs , Seating etc.

machine cut or chiselled on bed of cement

mortar 1:1 pointing with neat cement slurry

incl. moulding, Making grooves where it is

required etc. comp. as per instruction of

engineer in charge.

Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat on fair side of brick /

22a concrete walls for interior plastering upto any

Floor level and finished even and smooth in

i 746 All Floor Level 190.58 Sq.M.

Provdg. 20 mm. thick Finish / Mala cement

plaster in single coat plastering on ceilings,

b Beam side and sofits of stairs upto any Floor

level and finished even and smooth in

i 295 All Floor Level 215.15 Sq.M.

Providing & fixing 23 cm wide chicken mesh

jali with nails & then application of 15 mm

c 92 plaster on R.C.C. & masonary joints as per 292.59 Sq.mt

dir. of engg. In charge.

Providing and mixing water proofing

materials in cement mortar in proportion

d 80 recommended by the manufacturer. etc. 48.77

comp. as per instruction of engineer in

Providing 20 mm th. Double coat Sand face /

Mala Cement Plaster on Walls upto any

Height Above Ground level consisting of

23a 1946 mm th. Backing coat of C.M. 1:3 ( 1 cement : 297.68 Sq.M.

3 Ssand ) & 8 mm th. Finishing coat of C.M.

1:1 ( 1 cement : 1 sand ) ets. Complete.

White / Color washing with lime on

undecorated wall surfaces (two coats) to

24a 50 give an even shade including thoroughly 12.29 Sq.M.

brooming the surface to remove all dirt, dust

mortar drops and other foreign matter.

Providing & Applying 3 mm thick External

Wall Rustic Type Texture as per Design &

Make as Approved by Consultants /

Engineer in Charge. Work Includes All

Necessary Scaffolding Work upto Any

Finishing walls with Acrylic Smooth exterior

paint of required shade :New work (Two or

24 c 2000 more coat applied @ 1.67 ltr/10 sqm over 174.97 Sq.M.

and including priming coat of exterior primer

applied @ 2.20 kg/10 sqm)

P./L. METALIC HERITAGE SURFACE

Providing and fixing of HERITAGE textured

homogeneous wall finishing system from

BAKELITE HYLAM LTD or equivalent make

consisting of a two component system of

(25 kgs per Pack) made of 92% silica

particles coated with fade resistant

pigments, 100% acrylic polymer bonding

agent (5kgs per pack) with the applied

thickness of the coating being between

0.8mm-1.2mm to be applied on acured,

smooth level plaster without keying, as per

the shades/combinations approved, as per

the manufacturer directions, for usages, tobe

applied by an approved applicator of the

manufacturer, as per the directions /

supervision of the engineers in charge, all

complete. Includes All Necessary

Scaffolding Work upto Any Height.

Wall Painting (two coats) with plastic

emulsion paint of approved brand and

manufacture and of shade required on

undecorated wall surfaces to give an even

shade, over and including a priming coat

25a 900 with alkali resistance primer of approved 78.44 Sq.M.

brand and manufacture after thoroughly

brushing the surface free from mortar

droppings, and other foreign matter and also

including preparing the surface even and

sand -papered smooth

Extra over above item for every subsequent

b 900 coat of of wall painting with plastic emulsion 33.39 Sq.mt.

paint of approved brand.

Applying two coats of Birla (white cement

based) or Asian (acrylic lapy-putty) or

equivalent & two coats of primer of approved

brand and manufacture on new wall surface

to give an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth.

Providing and supplying ISI marked only

standard length Stonewate pipes in standard

lengths of following class and diameter

26 including all taxes,insurance, transportiton,

fright charges, octroi,inspection charges,

loading,unloading, conveyance to

departmental stores, stacking etc. complete

a 120 23 cm dia. 299.00 Rmt

Lowering, laying and jointing stone ware

pipes of following diameters with cement

joints in C.M.1:1 proportion in proper

26 position , grade and alignment at all level as

directed by Engineer-in- charge including

conveyance from stone to site of work,

Jointing material etc.comp.

b 120 23 cm dia. 128.00 Rmt

Providing & Laying & Jointing glazed

stoneware pipes incl. excavation up to

mt.,refilling, trasporting the pipe to work site,

unloading, lowering in trenches, laying and

jointing the pipes in c.m. 1:1 incl. all jointing

26 materials such as cement, sand, hemp,

bitumen as dire. testing the pipe line to a

head of 1.5 mt. and hydraulic test as dire

incl. watering trenches, spreading , and

carting away of surplus earth within

mt.lead as dire. etc. comp.

c 25 15 cm dia 288.23 Rmt

d 20 10 cm dia. 211.05 Rmt

Constructing brick masonry chamber for

under ground C.I. Inspection chamber and

bends with bricks having croshing strength

not less than 35 Kg. Cm2 in C.M. 1:5 C.I.

cover with frame (Lightduty) 455mm x

mm intenal dimensions total weight of cover

with frame to be not less than 38 Kg. (Wt. of

cover 23Kg.) and Wt. of frame 15Kg.)

(R.C.C.top slab with 1:2:4 mix (1-cement:2-

coarse sand:4-graded stone aggregate

20mm size) foundation concrete 1:5:10

inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455 mm x 610 mm and up to 850 mm deep

Constructing Manhole with R.C.C. top slab

in 1:2:4mix (1-cement: 2-coarse sand:4-

graded stone aggregate 20 mm nominal

size) foundation concrete 1:3:6 mix (1-

cement:3-coarse sand:6-Brick bats

40+50mm size) inside plastering 15mm thick

with Cement Mortar 1:5 (1-Cement:5-coarse

sand) finished with a floating coat of neat

cement and making channels in cement

concrete 1:2:4 mix (1-Cement:2 -Coarse

sand:4-stone aggregate 20 mm nominal

size) finished smooth complete including

curing and festing (i) Inside size 900mm x

1200mm and up to 1.5M. deep including C.I.

cover with frame size 560 mm diameter total

weight of cover and frame to be not less

than 128kgs. (Wt. of cover 64Kg. and Wt. of

frame 64Kg.) (A) With 230 mm thick walls of

brick masonry using brick having crushing

strength not less than 35Kg./Sq.cm. in

Cement Mortar 1:5 (1-Cement: 5-Coarse

sand) (2)B type depth up to 1.50 Metre

Constructing Manhole with R.C.C. top slab

in 1:2:4 mix (1-cement :2-coarse sand : 4-

graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3-

coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand)

finished with a floating coat of neat cement

and making channels in cement concrete

1:2:4 mix (1Cement :2-Coarse sand :4-stone

aggregate 20mm nominal size) finished

28b 3 smooth complete including curing and 23209.64 No.

festing (i) Inside size 900mm x 1200mm and

1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover

and frame to be not less than 128 kgs. (Wt.

of cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry

using brick having crushing strength not less

than 35Kg. / Sq.cm. in Cement Mortar 1:5

(1- Cement: 5-Coarse sand) (3) C type

depth 2.25 Metre for 150mm diameter

Providing and fixing white vitreous china flat

back or wall corner type lipped front urinal

basin of 340x280x470 mm sizes

respectively with standard flush pipe, Waster

29a 7 Pipe, Waste Coupling, PVc Connection and 3344.35 No.

G.I clamps complete, including painting of

fittings and brackets, cutting and making

good the walls and floors wherever required

: Cera Model No. S4020103 or Equivalent

Providing and Fixing of C.P. Brass BIB Cock

of 15 mm Dia of Jaquar make florentine

b 30 series model no. 5047n or equivalent make 1564.17 No.

with all necessary fittings. as approved by

Engineer - in - charge.,

Providing and fixing brass screw down Angle

stop tap.(A) 15mm dia. Of Jaquar make

c 60 florentine series modelno. 5053n or 1160.57 No.

equivalent make with all necessary fittings.

as approved by Engineer - in - charge.,

Providing and fixing C.P. brass shower rose

d 1 with 15mm or 20mm inlet Shower Arm.(A) 279.37 No.

100mm dia. Each

Providing and Fixing of C.P. Brass Two Way

Bib Cock of 15 mm Dia of Jaquar make

e 20 model no. 041kn or equivalent make 1411.58 No.

approved make with all necessary fittings. as

approved by Engineer - in - charge.,

Providing and Fixing of C.P. Brass urinal

Valve Auto Closing System With Full Built in

Control Cock & Wall Flange of 15 mm Dia

f 7 of Jaquar make model no. 077 or equivalent 2568.08 No.

make approved make with all necessary

fittings. as approved by Engineer - in -

Provdg. & laying S.W. Gully trap with C.I.

garting brick masonry chamber & water tight

30 13 C.I. cover with frame of 300 mm x 300 mm 1234.57 No.

size ( inside) with standard weight. sqare

mouth trap size 150 x100 mm P trap

Providing erecting and fixing double coated

ISI water tank of required capacity each with

31 8000 all necessary fittings and connection etc. 3.91 Litre

complete on terrace

Extra rate over item of excavation of earth

for excavation of asphalt pavement/RCC of

thickness up to 0.20 meter including

32 50 demolishing the asphalt carpet, metal, 71.42 Sq.M.

soiling / cutting Reinforcement etc.comp.

with stacking the material as directed.-up to

0.20 meter thickness

P/F PVC / C.I. (span) nahni trap and all of

the following nominal dia of self cleanising

design with C.I.Screw down or hinged

greeting inclusive cost of cutting and making

good the walls and floors for drain 75 mm

dia. etc. comp.

Provdg. And fixing to wall, ceiling & floor in

true line and level UPVC pipe Schedule-

of make as approved by engg. incharge.

pipe shall be fix on wall with the help of

clamp at every twi meter center to center of

shall be concealed as directed in cluding

neccesarry fitting etc. in cluding testing of

pipe and jointd and fixing the same with

adhesive solvent , including cost of all

materials of following nominal bore

i 40 15 mm 71.93 Rmt

ii 150 25 mm 90.93 Rmt

iii 10 32 mm 117.97 Rmt

iv 350 40 mm 146.65 Rmt

Providing and fixing concealed center point

to wall ceiling & floor CPVC (SDR 13.5)

PIPE having National Sanitation Foundation

34b (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps

including making good the wall, ceiling and

floor etc. complete

i 5 15 mm 165.21 Rmt

ii 5 20 mm 202.97 Rmt

iii 5 25 mm 247.25 Rmt

iv 5 32 mm 330.36 Rmt

v 5 40 mm 437.66 Rmt

vi 5 50 mm 647.30 Rmt

Provdg. And fixing to wall ,ceiling and floor

10.00 kg. F/Sq.Cm2 working pressure

polythelene pipes of the following outside

diameter, low, density, complete with special

flange compression type fittings, wall clips

etc. making good wall ceiling and floor.

b 15 (A) 75mm dia 274.68 Rmt

c 55 © 110 mm dia 332.91 Rmt

Providing and fixing water closet squatting

Pan ( Indian type W.C. Pan) size 580mm

(A)VitreousChina. (I)Long pattern = White

colour with Trap and Pair of Foot Rest

Providing and fixing white vitreous china

extended wall mounting water closet of Cera

Make S1043101 Carat Model Or Equivalent

Model With EWC Soft Close Seat Cover,

Chair Bracket, nuts, bolts and gasket etc

Providing and Fixing of C.P. Brass Flush

Cock of 25 mm Dia of Jaquar make model

no. 081 or equivalent and Outer Body of

b 12 Jaquar make model no. 5083KPM or 2732.58 No.

equivalent approved make with all

necessary fittings. as approved by Engineer

- in - charge.,

Providing and fixing Health Faucet of

Jaquar make model no. 573 oe equivalent

c 7 make as approved by engg. In charge with 1543.36 No.

flexible tube upto 1 metre long etc.

Providing and fixing 24"x18"x8" Carysil

Elegance or Equivalent Make of Single Bowl

38a 2 Sink S.S. Matt Finish With Waste Coupling, 7960.49 No.

Waste Pipe,etc. cutting and making good the

walls wherever required.

Providing and fixing Under counter Wash

basine including 15 mm C.P. Brass Pillar

tap, 32 mm C.P. Brass Waste of Standard

make, Cutting & Making good the wall /

granite Wherever Required in White Color :

Model S2030101 of Cera Clair Series or

Equivalent make Waash basine of size :

Providing and fixing Wall Hung wash basin

Including 32 mm C.P. brass waste of

standard pattern, cutting and making good

the walls / granite wherever require:In White

Color : Cera Cadal Or Equivalent Make

Wash basin of size 515 x 410 mm

Provdg. & fixing 600mm x 450 mm Bevelled

edge mirror of superior glass mounted of .6

39a 10 mm th. A.C. sheet or plywood sheet and 825.48 No.

fixed to wooden pluge with C.P. brass

screws and washers.

Providing and fixing mirror of superior 5 mm

thick glass required shape and size Fixed

39b 2 With Studs of approved make and shade : 1632.77 No.

Rectangular shape 1500x450 mm

Provdg. & fixing C.P..Brass towal rail

complete with C.P. brass brackets fixed to

wooden plugs with C.P. Brass screws.(600

mmx 20 mm size)

Providing and fixing ball valve (brass) of

41 approved quality, High or low pressure, with

plastic floats complete :

i 5 15 mm dia 886.22 No.

ii 1 20 mm dia 1099.94 No.

iii 8 25 mm dia 1552.93 No.

iv 20 40 mm dia 3312.60 No.

v 4 50 mm dia 4613.48 No.

Providing and fixing Full Way valve (HEX)

42a with wheel of approved quality :

i 2 15 mm Full Way valve (HEX) 1461.17 No.

ii 1 20 mm Full Way valve (HEX) 1924.61 No.

iii 4 25 mm Full Way valve (HEX) 2535.55 No.

iv 1 32 mm Full Way valve (HEX) 3377.64 No.

v 4 40 mm Full Way valve (HEX) 4661.10 No.

vi 2 50 mm Full Way valve (HEX) 6675.14 No.

Providing and Fixing of C.P.Brass Pillar

Cock of 15 mm Dia of Jaquar make model

43a 1 no. 5011n or equivalent make with all 1725.21 No.

necessary fittings. as approved by Engineer

- in - charge.,

Providing and Fixing of swan neck Sink Tap

Wall mount/Plateform Mount Jaquar make

b 2 model no. 5357n or equivalent make. Rate 2468.41 No.

shall Including of cost of labour, material,

necessary fittings etc.

Providing fixing of SS grab bar of Jaquar

make model no. 1507 or equivalent make

with all hardwares for Physically Handicap

Providing and laying integral cement based

water proofing treatment including

44a 270 preparation of surface as required for 1150.48 Sq.M.

treatment of roofs, balconies, terraces etc

consisting of following operations:

(a) Applying a slurry coat of neat cement

using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS.

2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls

upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using

broken bricks/brick bats 25 mm to 115 mm

size with 50% of cement mortar 1:5 (1

cement : 5 coarse sand) admixed with water

proofing compound conforming to IS :

and approved by Engineer-in-charge over

mm thick layer of cement mortar of mix 1:5

(1 cement :5 coarse sand ) admixed with

water proofing compound conforming to IS :

2645 and approved by Engineer-in-charge to

required slope and treating similarly the

adjoining walls upto 300 mm height including

rounding of junctions of walls and slabs.

(c) After two days of proper curing applying

a second coat of cement slurry using

kg/ sqm of cement admixed with water

proofing compound conforming to IS :

and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick

jointless cement mortar of mix 1:4 (1 cement

:4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and

approved by Engineerin- charge

(e) The whole terrace so finished shall be

flooded with water for a minimum period of

two weeks for curing and for final test.“All

above operations to be done in order and as

directed and specified by the Engineer-in-

Charge :and shall be guaranteed for

minimum period of 10 years after handing

over the completed building by the main

contractor to be finished as directed. Stamp

paper guarantee 10 years to be furnished

before receiving any payment from the

With average thickness of 120 mm and

minimum thickness at khurra as 65 mm.

Providing and laying broken chine mosaic

flooring for terrace using 12 mm to 20 mm

broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to

b 270 be tempered to bring mortar creme out upto 739.89 Sq. M.

surface using white cement including

rounding off junctions and extending them

upto 15 cm along the wall,clearing with

water and oxalic acid etc. as directed.

Providing and applying fibre reinforced

elastomeric liquid water proofing membrane

with resilient acrylic polymers having Sun

Reflectivity Index (SRI) of 105 on top of

concrete roof in three coats @10.76 litre/

sqm. One coat of self-priming of elastomeric

waterproofing liquid (dilution with water in

the ratio of 3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film

thickness of complete application/system not

less than 500 microns). The operation shall

be carried out after scrapping and properly

cleaning the surface to remove loose

particles with wire brushes, complete in all

respect as per the direction of Engineer-in-

Filling in Sunken Portion with good Quality

Aerated light weight concrete block having

crushing strength not less than 35 kg/sqcm

and where directed by the Architect /

Engineer-in-charge, in sunk in layer.

including watering, ramming where it is

required etc. complete, as directed by the

Architect / Engineer-in-charge .

Providing and laying Cement concrete

flooring for I.P.S. 1:2:4 (for Indian Patent

Stones) (1 cement: 2 coarse sand: 4 graded

stone aggregate 20 mm. nominal size) lain

in layer finished with a floating coat of net

cement- 50 mm th etc. complete.

Structural steel work ( Confirming to IS

4923-1997) riveted, bolted or welded in

builtup for all type sections, in framed work,

including cutting, hoisting, fixing in position

and applying a priming coat of approved

steel primer all complete as per the

structural designs and directions of Engineer

Applying priming coat over new steel and

other metel surface after and including

preparing the surface by throughly cleaning,

b 30 oil, grease, dirt and other foreign matter and 34.34 Sqmt

scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed

priming paint brushing red lead.

Painting two coats (excluding priming coat)

on new steel and other metal surface with

enamel paint, brushing, interior to give an

c 300 even shade including cleaning the surface 86.94 Sqmt

an even shade including cleaning the

surface of all dirt, dust and other foreign

Providing & Fixing 1 mm Thick S.S.-304

Grade 90 cm High S.S. Railing having Hand

Rail Member of 50 mm Dia., 3 No. of

Horizontal Pipe of 16 mm Dia. & Baluster

Suppprt of 40 mm Dia. At Every Third Step

as per Detail Given. Rate Includes All Work

Complete as per Description & as per

Direction of Engg. in Charge.

Providing and fixing in position collapsible

steel shutters with vertical channels 20x10x2

mm braced with flat iron diagonals 20x5 mm

size with top & bottom rails of T-iron

40x40x6 mm with 38 mm dia. Steel pulleys

complete with bolts , nuts , locking

arrangement , stoppers , handles including

applying a priming coat of red lead paint.

Providing corrugated 0.80 mm (22 gauge)

thick G.I. sheets roofing fixed with

galvanized iron ‘J’ or ‘L’ hook bolts, and nuts

b 2 8 mm. dia with bitumen and G.I. limpet 719.93 Sq.M.

washers filled with white lead complete

excluding the cost of purlines, rafters and

Providing valleys 900 mm. overall in plain

1.6 mm. thick G.I. sheet Class – 3 fixed with

c 2 ‘J’ or ‘L’ hook bolts and nuts galvanized from 1042.78 Sq.mt.

‘J’ or ‘L’ hook bolts and bitumen washers

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S.

laths inter-locked together through their

entire length and jointed together at the ends

by end locks mounted on specially designed

48 6 pipe shaft with bracket plates, guide 3468.72 Sq.M.

channels and arragements for inside and

outside locking with push-pull operation

including the cost of hood cover and spring

etc. complete.(A) Shutters having width

Providing and fixing 27mm domal Series -

1.2 mm Th. Alluminium Section Three track

Sliding window With Metalic Powder Coating

49a 7 and 4 MM Clear Glaas(Non Tuffen) Include 6373.85 Sq. M.

All Accessaries and Fixture etc. complete as

per the direction of Engineer-in-charge.

Providing and fixing 27mm domal Series -

1.2 mm Th. Alluminium Section Two track

Sliding window With Metalic Powder Coating

b 30 and 4 MM Clear Glaas(Non Tuffen) Include 4999.10 Sq. M.

All Accessaries and Fixture etc. complete as

per the direction of Engineer-in-charge.

Providing and fixing standared extruded of

alluminium section of size 63 mm x

mm x 1.2mm (Section:2434, @

50 a 19 Wt.0.643Kg/mt ) with colour anodized 1163.92 Sq. M.

alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete

for Ventilation

Providing and fixing standared extruded of

alluminium section of size 63.50 x 38.10 x

1.95 mm ( Section no: 4605, @Wt 1.094 Kg

50 b 7 / Rmt with colour anodized alluminium frame 1509.90 Sq. M.

with 5 mm thick transparent Clear / bronze

colour tinted float glass as details etc

complete for Fix window.

Providing and fixing ISI marked 35 mm thick

flush door shutters conforming to IS :

(Part I) decorative type, core of block board

construction with frame of 1st class hard

wood and well matched teak 3 ply veneering

with vertical grains or cross bands and face

veneers on both faces of shutters with

mm thick Decorative Laminated Sheet on

both faces of shutters including ISI marked

Stainless Steel butt hinges, bright /matt

finished 125 mm Stainless Steel handles of

approved quality & make, ISI marked

oxidised M.S. door latches / Aldrop

Conforming to IS:5930 with necessary

screws etc. complete as per direction of

Engg. incharge.

a 32 Flush shutter with both side laminate 4332.15 Sq.M.

Providing wood work in frames of Doors,

windows cleare story windows and

b 90 othersimilar works wrought, framede and 602.04

fixed in position. (A) Indian Teak Wood

Providing and fixing 35 mm th. Shutters for

doors windows & clearstory windows incl.

wood frames as specified 12 cm. x 7cm.

53 size incl. anodised alluminium fixtures and

fastenings including primer coat of

approved quality and two coats of oil paint

a 3 Fully glazed 4788.50 Sq. M.

b 3 Fully panelled 5478.89 Sq. M.

c 3 Partly panelled and partly glazed 5133.69 Sq. M.

Providing and fixing FRP frame size 100x50

mm and 28mm thick FRP depress panel

shutter having extra reinforcement on sides

& edges in Gel coat finish. The core of the

shutter & frame is to be filed up with injected

fire retardant grade polyurethene foam done

in situ alongwith embedded wooden pieces

for stiffening & also taking hinges & fintures.

The whole FRP frame & shutter is to be

water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary

screws & alluminium fixtures & fastenings &

fastener sleeve.

Making connection to the ex.M.H.in running

sewer incl. Dewatering and other required

machinery etc. of following dia pipes at any

convenient time. All damaged work shall be

well repaired as per instructions.

a 1 For Pipe 150 mm to 300 mm diameter 1339.29 No.

b 1 For Pipe 400 mm to 600 mm diameter 2232.14 No.

Making connection of galvanised Mild steel

distribution branch with galvanised mild steel

56 1 main pipe upto 80mm nominal bore by 600.08 No.

providing and fixing tee including cutting and

threading the pipes complete

Providing throating or plaster drip, grooves

57a 550 and moulding to Wall , R.C.C. chajja and 41.25 Rmt

Providing & Laying cement vatta 10 cm x

cm in size quarter round in c.m. 1:1 (

57b 100 cement, 1 coarse sand) laid in one layers 23.45 Rmt

finishing with a floating of neat cement

watering etc complete as dire.

Carring out plinth treat ment to post

construction/ existing structure by spraying

chemical solution for termite control

treatment including labour and material

consist ment withI.S.I specification. Using

Chlordene and Chiorpur files 20EC. As Per

58 300 6131_ paret- II Consentration Weight one 104.90 Sq.mt

percent is recommended i.e one litre 20EC

chemical emulsion with19 liter give1%

concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre

chemical/ Sqm of surface is recommended

Carring out timber treatment to all wood

work including drilling holes and spraying oil

based chemical solution on surface of timber

work for termite control including labour and

material etc. complete. Using Chlordene

20EC. As Per 6113_part III Consentration

59 50 Weight 1.00 percent is recommended one 54.98 Smt

litre chemical emulsion dillute with 9 liter of

kerosene precent concentration. Total dillute

concrentration will be10litre inclusive of the

litre chemical emulsion application 0.75/Litre

chemical per one Sqmt printed two coat

Paver Block Providing and laying shot

blasted Non - interlocking, Paver blocks of

specified thickness, size, grade of concrete

and colour machine made and blasting by

automatic shot blasting machine and high

density of as per approved sample of

approved make for footpath, parking areas,

service lanes,cross over and other areas as

mentioned in the drawing. Including

providing and laying 50 mm thick averave

bedding layer of coarse sand below paver

block as per required grading and

specification. Laid paver block shall be

mechanically compacted. The work of the

paving blocks shall be executed in line and

level by skilled mason of flooring work only.

Small size of paver block with same

specification shall be used at residue or at

end. It should be laid in such a way that the

no cutting of the paver block to be

necessary. If cutting of paver block shall be

required , than cut by machine only and

laying to be done by skilled flooring mason.

The finished surface of the paver block shall

have coarse sand Texture Finish. Pave

blocks shall be compacted and shall be re-

laid if necessary. Actual laid area shall be

measured and paid without any wastage. (A)

80 mm thick M-35 grade Grey Paver block of

size 200mm x 200mm. As per approved rate

SProviding and fixing pre-cast concrete kerb

stone of gray cement based concrete block

30cm length,30cm height and 15cm thick of

61 300 M250 grade concret as per approved design 358.06 R.mt.

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.

Providing and fixing double action hydraulic

floor spring of approved brand and

manufacture conforming to IS : 6315, having

brand logo embossed on the body / plate

with double spring mechanism and door

weight upto 125 kg, for doors, including cost

of cutting floors, embedding in floors as

required and making good the same

matching to the existing floor finishing and

cover plates with brass pivot and single

piece M.S. sheet outer box with slide plate

etc. complete as per the direction of

Engineer-in-charge. With stainless steel

cover plate minimum 1.25 mm thickness

Providing and fixing aluminium extruded

section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS :

3564, embossed on the body, door weight

upto 36 kg to 80 kg and door width from

mm to 1200 mm), with double speed

adjustment with necessary accessories and

screws etc. complete.

Designing, fabricating, testing, installing and

fixing in position Curtain Wall with Aluminium

Composite Panel Cladding, with open

grooves for linear as well as curvilinear

portions of the building , for all heights and

all levels etc. including:

(a) Structural analysis & design and

preparation of shop drawings for pressure

equalisation or rain screen principle as

required, proper drainage of water to make it

watertight including checking of all the

structural and functional design.

(b) Providing, fabricating and supplying and

fixing panels of aluminium composite panel

cladding in pan shape in metalic colour of

approved shades made out of 4mm thick

aluminium composite panel material

consisting of 3mm thick FR grade mineral

core sandwiched between two Aluminium

sheets (each 0.5mm thick). The aluminium

composite panel cladding sheet shall be coil

coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating

of approved colour andshade on face #

and polymer (Service) coating on face # 2 as

specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone

sealant, backer rods etc.

(c) The fastening brackets of Aluminium

alloy 6005 T5 / MS with Hot Dip Galvanised

with serrations and serrated washers to

arrest the wind load movement, fasteners,

SS 316 Pins and anchor bolts of approved

make in SS 316, Nylon separators to

prevent bi-metallic contacts all complete

required to perform as per specification and

drawing The item includes cost of all

material & labour component, the cost of all

mock ups at site, cost of all samples of the

individual components for testing in an

approved laboratory, field tests on the

assembled working curtain wall with

aluminium composite panel cladding,

cleaning and protection of the curtain wall

with aluminium composite panel cladding till

the handing over of the building for

occupation. Base frame work cost for ACP

cladding is included in this item rate. The

Contractor shall provide curtain wall with

aluminium composite panel cladding, having

all the performance characteristics all

complete , as per the Architectural drawings,

as per item description, as specified, as per

the approved shop drawings and as directed

by the Engineer-in-Charge. However, for the

purpose of payment, only the actual area on

the external face of the curtain wall with

Aluminum Composite Panel Cladding

(including width of groove) shall be

measured in sqm. up to two decimal places.

Providing and fixing Structural Glazing with

using the 17 Micron anodised of approved

colour alluminium section as transium,

mullium of size 63mm x 38mm x 2 mm with

using 6 mm thick reflective structural glass

of approved make, colour, toughned and

shade and fixed with silicone sealant and

spacer tap and at corner sealed neoprene

foam dust and Air sealed gasket mirred

including scaffolding, cleaning of glass

etc.complete at all heights anf lifts with all

necessary fitting and fixtures, anchore

b 2 fasteners, necessary M.S. or Aluminium 3953.75 Sq.mt.

brackets, suitable design for openable or

sliding window as per Architectural drawing

and as directed by Engineer-in-charge.

Grooves between the glasses to be filled

with sealant of Dow corning - structural

sealant 995, weather sealant 789. The entire

facade should be water proof. The mullions

are to be connected to bracket by SS-304

nut bolts. Measurement shall be given as

per actual execution of the work. (Rate are

included providing & fixing of MS structure

steel work wherever Required)

Providing and Fixing Box type metal letters

forming composite box made from 1mm

thick stainless steel plate of grade

having brush finish of following font size to

64 be fixed at Main Gate in english and or

Gujrati and including fixing charges. etc.

complete as per direction of Engg. incharge.

for Payment Purpose Height of Letter will be

a 840 Upto 300 mm Height 93.85 R. Inch

Providing and Fixing MURAL made out of

2mm thick s.s. plate grade 304, including

making necessary design as per Architect

dwg. Through laser cutting including

connection to the R.C.C./Masonary with

necessary frame,anchor fastnuts,M.S.Plate

etc. complete as per direction of Engg.

Providing and Fixing Sinage - internal and

external signage boards with Vinyle Text on

65b 2500 ACP sheet / 2 mm th. S.S. Plate etc. 9.38 Sq.Inch

complete as per direction of Engg. incharge.

Providing and fixing retro Reflective Hi

Intensity Micro Prismatic Grade Board using

2mm Aluminum / 4mm ACP, angle iron 75 x

75 x 6mm. Descaling and degreasing the

board as per requirement using epoxy

reflactive process by screen painting as

directed etc. complete including transporting

and fixing in C.C. 1:2:4 with necessary

excavation curing etc. complete as per

I.R.C. 67-2012 design. A warranty for

years for the Retro reflective sheeting from

original manufacturer & a certified copy of

year outdoor exposure test report from third

party test lab for the product offered shall be

submitted by contractor. (B)Class B Type-

4(MDR/ODR) retro reflective sheeting

Road marking with hot applied thermoplastic

paints with reflectorising glass beads on

bitumin surface providing and laying a hot

applied thermoplastic compound 2.5 mm

thick including reflectorising glass beads @

250gms per sqm area, thickness of 2.5mm

is excluding of surface applied glass beds as

per IRC:35-2015. The finished surface to be

level, uniform and free from streaks and

holes. zebra patta /bump patta lane/center

65d 15 line/ edge line/cut patta. The white color 364.08 Sqmt

marking should provide liminance coefficinet

on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min

100 mcd/m2/lux during the service life during

the day time. The marking should meet the

performance criteria for night time

reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of

IRC 352015. Warranty for the Retro

reflectivity should be two years.

CAT EYE/Pavement Marker(MNC two nail)

made out of acrylic StreneAcrylonitrile or hi-

impact poly Steren fitted with moulded of

metheacrylate(MNC)reflector cube corner

reflector design,filled with tightly adhering

pooting compound as per ASTMD-788 size

11.5x7x1.60 cms or 10x10x1.75 cms

provided with bituminous adhesive in

sufficient quantity with each unit fixing with

two shrank .Reflector on both side.Co

efficient of lumination as per specification

and compressive strenth 13 tones at

degree centigrade etc.B) Double side

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having T

egular edge & 15mm Thick Densified edges

on the Tile Periphery for Extra Strength The

Light weight calcium silicate ceiling tiles shall

have, light reflection 85% non-combustible

as per B.S.476 part IV, 100% humidity

resistance and also having thermal

conductivity 0.043° w/m KC. for the best

thermal Insulation.

The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/

Spintone/ Cosmos having NRC value of

& Globe having NRC value of 0.75 NRC or

equivalent of size 595X595 mm to be laid on

true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel

sections (galvanizing @ 120 grams per sqm

including bothside) consisting of main ‘T’

runner suitably spaced at joints to get

required length and size of 24X38 mm made

from 0.30 mm thick (minimum) sheet,

mm centre to centre, and cross ‘T’ of size

24X28 mm made out of 0.33 mm (Minimum)

sheet spaced 1200 mm along spaced

between main ‘T’ at 600 mm centre to

centre to form a grid of 1200X600mm and

secondary cross ’T’ of length 600mm and

size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of

size 600X600mm resting on periphery walls

/ partitions on a perimeter wall angle pre-

coated steel of size (24X24X3000mm made

of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long dry wall

screws @ 230mm interval and laying 15mm

thick Densified edges light weight calcium

silicate ceiling tiles of approved texture (Fine

Fissured/ Cosmos/Spintone) in the grid

including, cutting /making opening for

services like diffusers, grills, light fittings,

fixtures, smoke detectors etc., wherever

required, Main ‘T’ runners to be suspended

from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm

dia and 50mm long dash fasteners, 4mm

G.I. adjustable rods with galvanized steel

level clips of size 85X30X0.8mm, spaced at

1200mm centre to centre long main ‘T’

bottom exposed with 24mm of all T-sections

shall be pre-painted with polyester baked

paint, for all heights,

, as per specifications, drawings and as

directed by engineer-incharge.Note:- Only

calcium silicate false ceiling area will be

measured from wall to wall. No deduction

shall be made for exposed frames/ opening

(cut outs) having area less than 0.30 sqm.

The calcium silicate ceiling tiles shall have

NRC. Value of 0.50 (Minimum) for Fine

fissured/ Spintone/ Cosmos and 0.75 NRC

for Globe, light reflection 85%

noncombustible as per B.S. 476 part IV,

100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the

best thermal Insulation

Providing and fixing single layer water proof

gypusm board 12.5 mm thick of the make

New good Group Co.Ltd. or equivalent &

New good Group Co.Ltd. company sections

using water proof board of size 1220 mm x

1830 mm x 8.0 mm suspended by G.I

suspender of size 25 mm x 3 mm with

intermediate channel of size 18mm x40mm

x0.80mm at 1220 mm center to center

66b 30 ceiling section of size 40mmx 35mmx 600.94 Sq.mt.

0.55mm at 457 mm center to center and

perimetre chanel A of size 20mm x 27mm x

30mm x 0.50mm at edges & drops including

paper taps and sofit cleat, anchor fastener,

scoch bolt connecting cleat joining

compound top coat on ceiling including

making necessary opening for light fitting,

diffuser etc. complete as per detail drawing

Providing and Fixing 6 mm thick Lexan

Polycarbonate multi wall roofing sheet fixed

67a 5 with hilti screw and rubber silicon sealer and 1427.62 Sq.mt.

alluminium strip of size 50 x 3 mm etc

complete as directed by Engineer in charge

Providing Making & Fixing Glow sign Board

of suitable size as per approved color-

Designed Back Light Material fixed on G.I.

b 6 sheet Box of suitable size with concealed 2499.55 Sq.mt.

Light Fittings, Necessary Scaffolding etc.

complete as per direction of Officer in

Providing and supplying ISI Standard RCC

pipes (of sulphate resisting Cement )in

standard lengths of following class and

diameter suitable for rubber ring joints

68 (socket and spigot) including all

taxes,insurance, transportation,treight

charges,octroi,inspection charges,

loading,unloading, conveyance to

departmental stores, stacking etc. comple

Class NP3 Test pressure 0.7 Kg/Sq.Cm

a 50 300 mm Diameter 755.00 Rmt

b 10 450 mm Diameter 1361.00 Rmt

Lowering, laying and jointing R.C.C. pipes in

C.M.1:1 1/2 of following diameters in proper

position , grade and alignment at all level as

68 directed by Engineer-in- charge including

conveyance from stone to site of work,

labour giving hydraulic testing as per ISI

c 50 300 mm Diameter 119.00 Rmt

d 10 450 mm Diameter 171.00 Rmt

Constructing Bombay Pattern Type Catch

Pit of size 0.60 x 0.60 depth up to 1 mt

including excavation, B.B.C.C. (1:5:10),

cms thick brick maso. wall in the prop. of CM

69 5 (1:6) with 40 mm thick IPS flooring in the 3125.00 No

prop M15 at bottom and 15 mm thick cement

plaster inside the catch pit in the proportion

of CM (1:3) with out jali etc. comp. as

CatchPit Jali Fixing P/F FRC catch pit jali

with frame 600mm x 600mm clear opening

etc. comp.. As directed by engineer in

Providing & Fixing Sun Control Reflective

Type Film / Frosted Film as Selected by

71 15 Architect/ Engg. In Charge For Glass Doors / 646.37 Sq.mt.

Windows etc. as Directed.

Providing & Fixing in Position Vertical Roller

Blinds with Minimum 3 % and Maximum 5 %

Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated G-

Channel at the Topof Window with

necessary Screw , Cleats etc. and PVC

Roller ( Weight Pipe) and PVC Chain For Up

and Down Movement of Blinds etc. of

Approved Make and as per Drawings /

Instruction of Engg. in Charge For All Colors

and Shades. Rates Includes all Lead and Lift

For All Floor Level, All Height , All Material

Accessories, Fixing , Scaffolding , Labor etc.

Complete in All Respects. All Required

Accessories & Material must be From Same

PERCOLATION WELL

Drilling of pilot bore hole in Alluvial Strata by

73 240 direct Rotary Rig of 250 mm. 694.64 Rmt

74 240 Reaming 400 mm 212.50 Rmt

75 2 Electro Logging charges with carting 16071.43 Job

Providing and Installing 200 mm dia

76 120 IS:12818 upvc Casing Pipe "CM" class plain 1193.75 Rmt

Providing and Installing 200 mm dia

77 2 IS:12818 upvc End Cap, with Air Vent cowl 669.64 Set

200 mm dia Regular with 1.5 mm sloted size

cage type trapezoidal shape wire wound

little carbon galvanized screen confirming to

79 20 Supply of Pea sized Gravel 2029.46 Cmt

80 2 Air Vent of 50 mm Bend 401.79 Unit

Lowering and Removing of Dropline up to

81 240 Depth 186 mtr. 147.32 Rmt

82 2 Air Compressor 60 CFM/150 PSI 22205.36 Ls

I. No. Qty Items Unit Rate Per Amount

Electrical Work Estimate

1 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand

copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC

/ Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and

65 accessories erected concealed in 505.05 Pt

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade ZHFR/HRFR

PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and

hum free EME four or more step type

1.2 electronic fan regulator with separately

mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

15 accessories erected concealed in 701.40 Pt

wall/ceiling complete

Point wiring for secondary light point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade

ZHFR/HRFR PVC insulated multi strand

copper wires, in below type of pipe to be

erected complete with earth continuity and

necessary connection with primary light with

accessories erected on Metal / PVC /

wooden box covered covered with

appropriate front plate modules erected on /

in wall / ceiling for open / concealed wiring.

with necessary Lamp holder / ceiling rose /

H.D.Connector as directed.as per pipe

erected with following type of accessories.

Note:- Maximum up to 6 mtrs length, excess

will be considered as Mains for Secondary

(f) with medium class Rigid PVC pipe and

20 accessories erected concealed in 174.30 Pt

wall/ceiling complete

Point wiring for Individual Plug with & earth

wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade ZHFR/HRFR PVC

insulated multi strand copper wires up to

mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe

erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5

1.4.1 10 sq.mm Cu. Wire from nearby 530.25 Pt

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-

1.4.2 5 2.5 sq.mm Cu. Wire from mcb db board. 774.90 Pt

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

[III] For 16A Plug and 16 amp switch with 2-

1.4.3 10 4 sq.mm Cu. Wire with 2.5 sq.mm ( green) 906.15 Pt

earthing wire from mcb d b board.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in

wall/ceiling complete

Point wiring for on board Looped Plug with

6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box,

1.5 15 single mounting base frame covered with 255.00 Pt

textured / metallic/white front plate modules

erected on / in wall / ceiling with following

type accessories

Point wiring for Two Way Controlled Light

Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked

KV grade ZHFR/HRFR PVC insulated multi

strand copper wires erected in below type of

pipe with 6A Modular type switches and

1.6 following type of accessories erected on

PVC / Metallic/Wooden box, single mounting

base frame covered with textured /

metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling

rose or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

1 accessories erected concealed in 627.90 Pt

wall/ceiling complete

Providing following type of Modular Type

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

1.7 frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge.

1.7.1 2 (1)One No. SP 6 Amp. 150.00 E.a.

1.7.2 2 (2) One No 5 pin plug 150.00 E.a.

1.7.3 10 (7) Blank Plate Single 25.00 E.a.

1.7.4 5 (9) 16 Amp. SP one way switch 179.00 E.a.

1.7.5 5 (10) 6/16Amp. Universal socket 198.00 E.a.

(13) 6A/10A/16A/20A/25A/32A Single pole

1.7.6 2 Modular MCB Switch 307.00 E.a.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double

1.7.7 2 Pole Modular MCB Switch 406.00 E.a.

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

1.8 erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed

Providing & erecting PVC Corrugated

Flexible Conduit with required nos. of

1.9 coupling, PVC bushes, Check-nuts etc.

complete of following sizes.

providing and erecting Mains with ISI

marked electrolyte stranded copper

conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor,

insulated wire (HRFR) conforms to IS-694,

erected in existing pipe with 1.5sq. mm

copper conductor of same specifications for

earth continuity of following size.

In Existing medium class Rigid PVC pipe

and accessories

1.10.4 20 (b) 2 wire 6 sq. mm 139.00 Mtr

providing and erecting Mains with 1.1 KV

grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following

1.11 type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

1.11.1 20 (h) 4 wire 6 sq. mm 258.00 Mtr

(i) 4 wire 10 sq. mm

1.11.2 25 (use earth wire of 4 sq.mm ) 421.00 Mtr

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

1.12 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.

1.12.1 20 (e) One wire 6.00 sq. mm 56.00 Mtr

1.12.2 20 (f) One wire 10.00 sq. mm 91.00 Mtr

1.12.3 10 (g) One wire 16.00 sq. mm 141.00 Mtr

1.12.4 10 (h) One wire 25.00 sq. mm 234.00 Mtr

1.12.5 60 (i) One wire 35.00 sq. mm 298.00 Mtr

Supplying and erecting Flexible PVC

insulated multi strand multi core 1.1 kv grade

1.13 ISI marked copper wires of following size to

be erected as directed.

1.13.1 250 e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 Mtr

1.13.2 225 h) 2.50 Sq.mm 3 core round PVC sheathed 77.00 Mtr

1.13.3 90 k) 4.00Sq.mm 4 core round PVC sheathed 175.00 Mtr

Supplying & erecting M.S. Box having

Gauge painted with red oxide or Heavy

1.14 duty PVC box erected flushed on wall or

concealed in wall with necessary plastering

& finishing as directed of following size.

Supplying and laying UPVC cable trunking

system comprising unplasticised polyvinyl,

chloride rigid material with ignition free and

flame proof confirming BS with necessary

end caps Internal and external bend, flat

bends, coupler, tee etc..All necessary

accessories and measuring of following

1.15.1 10 (2) 100 mm x 50 mm trunking 424.00 Mtr

(4)100 mm x 50 mm trunking with TWIN

1.15.2 10 compartment With clip in divider 1309.00 Mtr

Supplying & erecting 20 Amp 10 KA ‘C

Curve’ single pole MCB with 20 Amp. Plug

1.16 socket, company fabricated powder coated

sheet steel enclosure erected as directed

with connection.

1 [A] Metal Clad Socket with metal clad top 522.00 E.a.

Providing & erecting insulated socket

3P+N+E with Plug 32A rating which is

comprised of Four pole MCB slot and

insulated socket IP40

SUB - TOTAL OF INTERNAL WIRING

2 Switchgears , Panels , MCBDBs & MCBs

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at

V,having normal current rating up to 25 A to

2.1 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with

all internal connections, spreader tinned

copper & complete erected in existing

G.M.S. housing.

8 ICS=100% of ICU only 6112.00 No

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having normal current rating 125A. with

2.2 Fixed thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper &

complete erected in existing 16 G.M.S.

3 ICS=100% of ICU only 7976.00 No

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V.

having Normal current rating 200A.with

2.3 variable Thermal & magnetic release

suitable to work on A.C.supply 50 c/s. with

all internal connections, spreader tinned

copper & complete erected in existing

2 ICS=100% of ICU only 16061.00 No

Providing and erecting Approved make Four

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above

at 415 V . having normal current rating

2.4 250A. with variable thermal & magnetic

release suitable to work on A.C.supply

c/s. with all internal connections, spreader

tinned copper & complete erected in existing

16 G.M.S. housing.

2 ICS=100% of ICU only 24979.00 No

providing and erecting Approved make Earth

fault Relay suitable to mount with inter

connection suitable to following size of

2.5 moulded case circuit breaker having CT ratio

& MCCB rating as following along with shunt

trip 220V AC. with all internal connections &

complete erected in existing M.S.housing..

Fabricating the box type items made from

M.S. Sheet with A.I. supports, wings, doors,

handles other hardware materials as per

requirement design with finishing by three

tank powder coating processed inside and

outside painted, erected as directed

including minor civil work. to install above

providing and erecting Miniature circuit

breaker single pole 0.5A to 2A system and

2.7 35 having breaking capacity 10 KA to be 268.00 No

erected in existing box. confirming to IS

8828/1996 with ISI Mark

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

2.9 having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

2.10. 10KA breaking capacity & confirms to IS

:8828 in existing box having following

Providing & erecting 415 V MCB three Pole

for Motor & Inductive Load (C Curve) having

2.11 10KA breaking capacity & confirms to IS

:8828 in existing box having following

providing and erecting Approved make

RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for

2.12 operation on single phase 240 V,50Hz.

having characteristic of quick action &

tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

12 (ii) 40Amps. DP 2213.00 No

Providing and erecting following additional

2.13 parts for panel mounting MCCBs

(A)Extended operating rotary handle with

pad lock with three position trip,off,on

suitable for 25A to 250 A panel mounting

Supplying and erecting approved make

panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC

Volts range erected on existing panel board

with all connection, wiring etc .with

manufacturers calibration certificate.

Supplying and erecting approved make

panel mounting type Digital Ammeter

having 3 digits LED display, external CT

operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected

on existing panel board with all connection,

wiring etc .with manufacturers calibration

Supplying and erecting Ammeter / Voltmeter

selector switch for 3 phase AC Supply 500 V

on existing panel board with necessary

Providing & erecting L.T. Current

Transformer with bar primary 50/5 to 1000/5

2.17 27 ratio 15 VA burden erected in existing CRCA 272.00 No

box duly secured with insulating materials

connected to the meter

Supplying & erecting approved make Power

Factor Meter 150mm dia flush/projection

type/ balanced & unbalanced load to work

2.18 3 with appropriately provided CT’s 100/5A to 5052.00 No

400/5A ratio & other accessories complete

erected in M.S. box & connected to the

circuit by means of PVC copper Core leads.

Supplying and erecting approved make

suitable panel indicator LED type lamp, lens

cover, complete erected with necessary

Providing & erecting insulated socket

3P+N+E with Plug16A rating which is

comprised of Four pole MCB slot and

insulated socket IP40

Supplying and erecting triple pole & neutral

440V/ 500V panel mounting Aluminium

Busbars with four equal Nos. of bus having

current density not more than 0.8 Amp. /

sq.mm (Rated current / cross section area)

2.21 duly wrapped with colour insulating tape for

phase sequence of following current carrying

capacity, erected with necessary bus bar

supports /insulators, main cable socket to

each busbar,erected in existing cubical

panel with necessary connections.

2.21.1 50 (A) Suitable for 100 Amp. Capacity 654.00 RnMtr

2.21.2 30 (B) Suitable for 200 Amp. Capacity 1027.00 RnMtr

2.21.3 10 (C) Suitable for 300 Amp. Capacity 1455.00 RnMtr

Supplying and erecting triple pole & neutral

440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte

bus having current density not more than

Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating

tape for phase sequence of following current

carrying capacity, erected with necessary

bus bar supports /insulators, main cable

socket to each bar, erected in existing

cubical panel with necessary connections.

2.22 22 (A) Suitable for 100 Amp. Capacity 1942.00 RnMtr

Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

indoor type cubical panel board necessary

IP-42 and above protection as per approval

from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body &

2.23 doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

, supporting angles/ flats channel including

cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per

requirements & instruction of engineer-in-

charge with erection of

supplied switch gears, BUSBARS, suitable

size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with

locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding

base beams) The panel shall be supplied

with following approved manufacturers with

following size.

(B) The standard companies switch gear

shall be used and only manufacturers at

CPRI approved factory

8 (i) with 350mm depth 14755.00 Sqmtr

Providing & erecting weather proof, dust &

vermin proof, floor mounted front operated

outdoor type double door cubical panel

board necessary IP-54 and above protection

as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with

necessary accesories , supporting angles/

flats channel including cutting, bending,

drilling, welding, riveting with internal

partitions & cable alley as per requirements

& instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable

size of inter connecting PVC copper wire /

copper-aluminium strips, rubber grommets,

rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with

locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board,necessary

ventilation,earthing strip complete. The

Panel shall be painted with epoxy powder

(The rates excludes the cost of switchgears,

bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding

base beams) The panel shall be supplied

with following approved manufacturers with

following size.

(B) The standard companies switch gear

shall be used and only manufacturers at

CPRI approved factory

14 (i) with 350mm depth 16162.00 Sqmtr

Supplying & erecting XLPE(IS:7098)(I)-88

2.25 ISI unarmoured copper cable 1.1 KV grade

to be erected as directed of following size.

2.25.3 40 (C) 2 core 6 Sq. mm 202.00 Mtr

2.25.4 50 (B) 2 core 4 sq.mm 130.00 Mtr

providing and erecting Mains with ISI

marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS

2.26 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel,

relays, power switchgears, motor starters &

control wiring) with required size of copper

lugs, nuts and bolts if required.

2.26.1 350 (a) One wire 1.00 sq. mm 12.00 Mtr

2.26.2 190 (b) One wire 1.50 sq. mm 17.00 Mtr

Design, fabrication, assembling, supply,

installation, testing and commissioning of

cubicle type,25KVAR, Voltage Rating 415V

A.C.,3-Phase , APFC Panel having 5-steps (

2-3-5--5-10 kvar heavy duty can type

capacitors ) with suitable rating of Incomer

MCB, CT. as per approved by engineer

MCBDBs and MCBs

providing and erecting Miniature circuit

breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with

Providing & erecting 240 V MCB double pole

switch for motor & inductive load (C Curve)

2.29 having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following

Providing & erecting 415 V MCB Four Pole

for Motor & Inductive Load (C Curve) having

2.30. 10KA breaking capacity & confirms to IS

:8828 in existing box having following

Sheets steel powder coated enclosure

2.31 4 suitable for incorporating One/Two nos. 175.00 E.a.

Providing and erecting Sheet Steel powder

coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral

link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB

to house appropriate nos. of MCBs.(The

DBs should be used of same company of

MCB to be used) suitable for

(A) single phase incoming and horizontal

single phase outgoing

(b) sheet steel double door (IP-43)

(B) three phase incoming and single phase

2.33 horizontal type outgoing Per phase isolation

(b) sheet steel double door

Supplying & erecting Sheet Steel powder

coated Cable end termination Box to be

mounted on Top or Bottom of the MCB

Distribution Box for housing/covering Extra

wires & Cables, suitable for following size of

2.34.1 2 (G) Three Phase 8 Way 819.60 E.a.

2.34.2 1 (G) Three Phase 8 Way 683.00 E.a.

providing and erecting Approved make

ELCBs / RCCBs conforming to IS:

and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and

suitable for operation on single phase

V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed

Providing and erecting Sheet Steel powder

coated Vertical MCB distribution board

(VTPN) - flush / surface mounted double

door (IP54) fitted with insulated copper

busbar, isolated neutral link, earth bar and

2.36 DIN rail, confirming to IS 13032 and BS

5486-1986,IP-54 suitable for 63/100 AMP

TPN MCCB + RCCB as incomer and three

phase outgoing as per following .(The DBs

should be used of same company of MCB to

1 (B)6 way outgoing 12061.00 E.a.

Providing & erecting 415 V MCB three Pole

for Motor & Inductive Load (C Curve) having

2.37 10KA breaking capacity & confirms to IS

:8828 in existing box having following

Providing and erecting metallic vitrified

danger notice board as per language

2.38 12 suggested by engineer incharge for 69.00 E.a.

MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing & erecting Medium Voltage

Danger Notice Board sticker as per

language suggested by engineer incharge of

standard size as per IS-2551

SUB - TOTAL OF Switchgears , Panel and

Follow IS code :3043 is the guideline for

Providing and erecting required size HOT

deep Galvanised iron strip for earthing of

H.T. , OCB/ ACB/ Transformer LT panel

board, Motors etc. using proper clamp.

Providing and erecting required size Copper

strip for earthing of H.T. OCB / ACB/

Transformer, LT panel board, Motors etc.

using copper clamp.

Providing and erecting Annealed bare

Copper wire 8 to 16 SWG.

Providing and erecting HOT deep

Galvanised iron strip wire 8 to 16 SWG.

Supplying & erecting earth pit of minimum

bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising,

connection terminal dia of 12mm with

constant ohmic value surrounded by highly

conductive compound with high charge

dissipation suitable for following type of

applications with chamber and heavy duty

cover.(approved make OEM has to submit

test certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 W/ meter

testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to

retain moisture for long time Necessary test

report must be submitted.

(a) For Electrical Installation up to 440V in

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

(c) For Electrical Installation covering

Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of

Supply, installation,testing and

commissioning of Chemical Earthing with UL

Certified 17.2mm Dia. X 3000mm Long

Micron-Copper bonded M.S. Rod

manufactured as per IEC 62561-2 with

25Kg Bentonite powder plus " U " bolt rod

clamp complete with Lockable high

performence chamber suitable & tested for

5000T capacity with SS Hardware.or

SUB - TOTAL OF Earthing

CABLES, Cable Termination and cable

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

4.1 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe of following size of cables

(A-1) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2

(B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand / Solid

4.2 Aluminium conductor for 1.1 KV. to be laid

on wall with necessary clamps or in existing

trench / pipe of following size of cables

4.2.1 90 (a) 4 core 4 Sq. mm 116.00 Mtr

4.2.2 350 (b) 4 core 6 Sq. mm 125.00 Mtr

Providing and erecting XLPE (IS:7098)(I)-88

ISI armoured cable multistrand Aluminium

4.3 conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe of following size of cables

Supplying & erecting XLPE(IS:7098)(I)-88

4.4 ISI unarmoured copper cable 1.1 KV grade

to be erected as directed of following size.

4.4.1 15 (G) 3 core 6 Sq. mm 290.00 Mtr

4.4.2 10 (H) 3 core 10 Sq. mm 439.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand / Solid

Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps or in existing

trench / pipe at road crossing or floor of

following size of cables.

4.5.2 525 (B) 4 core 4 Sq. mm 361.00 Mtr

4.5.3 90 (C) 4 core 6 Sq. mm 505.00 Mtr

Providing and erecting XLPE(IS:7098)(I)-88

ISI armoured cable multistrand Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench /

pipe at road crossing or floor of following

size of cables.

25 (C) 4 core 10 Sq. mm 670.00 Mtr

Making trench in soft soil of suitable width of

90 cm deep for laying cable or locating the

4.7 650 fault all over the run and back filling the 55.00 Mtr

same and making the surface as normal

Covering of cable with second class bricks

or cement tiles laid cover the cable

4.8 440 crosswise & also on both sides with covering 139.00 Mtr

of 7. 5 Cm. layer of sand above & below

cable (16 bricks per meter)

( A )Making trench in Hard Murrum / Tar

Road of suitable width of 90 cm or required

depth for laying any size of cable or locating

the fault all over the run and back filling the

same and making the surface as normal

(B) If additional machinery like hammer

4.10. 5 driller or JCB use [Add] 354.00 Mtr

Drilling the road without breaking the road

surface (Asphalt) for laying of cable for

4.11 feeding power supply by making up to

following size of holes at both ends

4.11.1 5 (A) Up to 100 mm bore dia 488.00 Mtr

4.11.2 5 (B) Up to 150 mm bore dia 610.00 Mtr

Supplying following size of Light duty “A”

4.12 Class G.I . Pipe & erecting as directed by

Engineer-in-charge.

20 (A) 25 mm dia 171.00 Mtr

Providing & laying. R.C.C. Hume pipe for

cable to be laid 90 cm. below ground across

4.13 the road crossing or on floor with necessary

material in an approved manner and making

the ground as per original.

Providing & laying approved make Double

walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with

4.14 necessary connecting accessories of same

material at required depth in existing trench

for laying of cable. below ground / road

surface for enclosing cable

4.14.1 360 (A)50 mm outer dia 62.00 Mtr

4.14.2 630 (B)63mm outer dia 73.00 Mtr

4.14.3 50 (C))90 mm outer dia 95.00 Mtr

4.14.4 50 (D)120 mm outer dia. 136.00 Mtr

Providing & laying approved make ISI

marked Rigid PVC pipe having 6Kg / cm2

(Class-3) to be erected at road crossing on

or floor as directed for laying of cable. The

pipes as following size of dia & weight per

4.15.1 15 (D) 75 mm inner Dia. (5.5 Kg/6RMT) 124.00 Mtr

4.15.2 10 (F) 110 mm inner Dia. (11.63 Kg/6 RMT) 234.00 Mtr

Providing and, fixing heavy duty flange type

brass cable gland with rubber ring for PVC

4.16 insulated armoured cable complete with out

going tails, insulating tape etc for following

size of cables.

Providing and, fixing heavy duty flange type

brass double compression type cable gland

with rubber ring for PVC insulated armoured

cable complete with out going tails,

insulating tape etc for following size of

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

Solder less crimping type Copper lugs

conforming to IS suitable for cable of

following size evenly crimped with high

pressure tool & connected to switchgear

terminals with brass/cadmium plated nut

bolts in an approved manner.

SUB - TOTAL OF Cables,Cable

Terminations & Cable Trenches

5 Light Fixtures & Fans

Supply , Installation, testing and

commissioning of pre-wired, LED fitting/post

top luminaries etc of all types, complete with

all accessories and tube etc. directly on

ceiling/ wall, including connection with

sq. mm FRLS PVC insulated, flexible,

copper conductor, single core cable with

flexible conduits and coupler and earthing

etc. as required. Note:- The LED Light

fixtures should comply all international

standards third party ( LM 79 for complete

fixture, LM 80 for individual LED ). The

Manufacturer / Channel Partner of the

Manufacturer has to submit 4- Years

unconditional free Replacement Guarantee

for complete fixture.

Supplying and erecting LED indoor fittings

with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing

used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/

aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V,

5.1 Power Factor more than 0.95, THD <

15%,CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/watt , LED driver

efficiency > 85 %( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.)

( A ) Tube Light with integral / non integral

(iii) 18-20 Watts, Surge - 2KV,IP-20,

5.1.1a 2 conventional 4 feet 293.00 No

(v) 36-40 Watts, Surge-2 KV, IP-20,

5.1.1b 25 conventional 4 feet 530.00 No

(B) LED Panel Light with provision for Plane

5.1.2 front frame with translucent cover fixed to

housing complete.IP20

5.1.2a 4 (a)up to 8 Watts,4" x 4", Surge-2 KV 271.00 No

5.1.2b 30 (iii) 12-15 watts, 6" x 6", Surge-2 KV 462.00 No

5.1.2c 12 (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV 607.00 No

5.1.3 (F) Spot Light 425 Lumens, Surge-2KV

5.1.3a 6 (a) 3 to 7 Watts 805.00 No

5.1.4 2 (H) Mirror Light 9 Watts, wall mounted 309.00 No

minimum 1 feet long

Providing and erecting PVC body surface or

pendent mounting LED Bulk type 9 watt

Lighting Fitting with electronic driver. And

lumen output from luminaire 720lm , input

voltage range 90-300VAC , 50Hz cool

white(3000 to 6500k), inbuilt driver, -20degC

to +60degC working temperature, AL frame

with Beam Angle 120deg

Providing & erecting Approved make Power

Saving 50 Watt Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt

A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with

canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by

Engineer in charge))

Supplying & erecting approved make low

noise decorative exhaust fan having size

5.4 18 200mm with 1350 RPM with square frame 1687.00 No

ABS body with inbuilt lowers & square

Supplying & erecting fan hook box of

mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and

5.5 12 pierced through a 16 Gauge M.S. box / 107.00 No

Heavy Duty PVC box complete erected

concealed in Ceiling with necessary

Providing 2.5mm.thick laminated acrylic

sheet to cover the fan hook or Fan box.

Supplying and erecting 19 / 20 mm. nominal

bore Medium Class M.S. Pipe down rod

5.7 12 erected duly painted for fan complete with 107.00 Mtr

proper insulation without leakage and

Supplying & erecting single phase approved

make industrial exhaust fan suitable for

medium duty ring mounted low noise

operation suitable for medium duty having

following dia size and maximum speed in

4 [D] 450 mm dia 900 RPM 3306.00 No

Providing suitable M.S. louver shutter of the

5.9 4 Exhaust fan. 365.00 No

Supplying & erecting electro galvanised G.I.

wire micro mesh jali cover of grade

5.10. 3 required size with suitable wooden frame 628.00 Sqmtr

duly fitted in wall outside of exhaust fan for

insect protection.

SUB - TOTAL OF Light Fixtures & Fans

6 External lighting

Supply , Installation, testing and

commissioning of pre-wired, LED fitting /post

top luminaries etc of all typesof external

lights, complete with all accessories and

tube etc. directly on pole / pole bracket

including connection with 1.5 / 2.5 sq. mm

FRLS PVC insulated,3 core flexible, copper

conductor, with flexible conduits and

coupler and earthing etc. as required.

Supplying and erecting LED street light /

Flood light fittings with High power White

LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with

smooth finish powder coated and heat sink

extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with

toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage

capacity of LED fittings.The Engineer

incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -

4KV /5000K integral and 10 kv non integral

6.1.1 ,Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply.

(f) Above 60 watts to 90 watts ( Required

(B) Flood Light (IP-65), Surge -4KV/5000K

,Light must have 440VAC line supply

protection. It should withstand 48 hours for

440VAC line supply

6.1.2.a 34 (c) Above 60 watts to 90 watts 6028.00 No

6.1.2.b 6 (v) above 120 to 160 watts 8370.00 No

6.1.2c 22 (vii) above 200 to 250 watts 10711.00 No

Supply of approved make frp/grp pole

having followiing specifications :

FRP/GRP pole made by centrifugal

moulding process using thermoset resin

polyester/epoxy resin system having

minimum glass content 45.0%.The pole

should be in one pieceand tapered round in

shape,having smooth outside surface finish

and should be totally fre from corrosion as

well as non conductive and shock proof.

Pole should be provided with FRP/GRP

base bracket dully fabricated from

6.2 metal(M.S) and dully claded with FRP/GRP

material to avoid any metal exposer and

painted with PU paint.

Pole should mechanical properties i.e

Specfic gravity (ASTM D 792) 1.3‐1.8

Kg/m3, 2. Glass Content % by weight

absorption (ASTM D 570) <0.5%, 4. Tensile

Strength(ASTM D 638) 200+/‐50Mpa,

Flexural strength (ASTM D 790) 250+/‐

50Mpa, 6. Compressive Strength (ASTM D

695) 200+/‐50MPa, 7. Yeild Strength(ASTM

Pole should be flame retardant as per IS

6746.Resin used shall be UV resistance and

pigmented. Pole should be painted with first

coat of epoxy primer and then two coat of

highly weather resistance polyurethen paint

to ensure proper addhesion of the

paint.Minimum thickness shall be 80 to

micron.Defelection of the pole shall not

exceed more than 10.0 % of the length of

the pole for the given load.Pole should be

generally made as per the dimensional

data,performance criteria and some

interchagebility features of poles as per the

standard ANSI C123.20 latest version of

ASTM D 923/01 including cable termination

box with necessory accessories.The size of

pole and type of installation with foundation

Anchor Base & Internal junction box as per

the manufacturer details and site

requirement . The cost of 6 Mtr & 10 Mtr

pole's Flood light mounting ring is included.

(3) 'B' class (Heavy Duty) frp/grp pole

suitable for base plate mounting

[D] Overall Length of 6.0 meter, Average

thickness : 7mm, Top/Bottom Outside Dia.

76/176mm +/‐2.Weight of Pole 25.0 Kg

6.2.1 16 approx. (Without base) Metal Anchor Base 16815.00 E.a.

dully frp claded (Size : 340 Ø * 12mmthk

Mounting hole PCD 285mm * 6 nos. of 20 Ø

[H] Overall Length of 10.0 meter, Average

thickness : 9mm, Top/Bottom Outside Dia.

76/244mm +/‐2.Weight of Pole 62.0 Kg

6.2.2 8 approx. (Without base) Metal Anchor Base 34768.00 E.a.

dully frp claded (Size : 450 Ø * 18mmthk

Mounting hole PCD 390mm * 6 nos. of 20 Ø

Providing FRP/GRP arm bracket of having

6.3 15˚ arm with 50 mm OD pipe *5 mm

thk,1000mm long from pole centre

6.3.1 1 (a) Single arm bracket 1882.00 No

6.3.2 1 (b) Double arm bracket 2390.00 No

Supplying & erecting sintex make SMC

press moulded composite FRP. loop-in,

loop-out approx. 2mm thick box complete

with bakelite connector strip 4way & hinged

doors having locking arrangements with

mounting clamp with nuts, bolts & washers

suitable for erection on wall ( c)150mm x

125mm x 100mm [deep].

Providing cement concrete.for foundation or

for concrete filling in 1:2:4 ratio with 20 to

6.5 28 mm stone metal duly plastered with 5077.00 CU Mtr

necessary curing for pole muffing or any

B' class galvanised iron pipe 32 mm outside

dia 45 cms long duly welded on 20 cms x

cms x 3 mm thick M.S. base plate, erected

on wall or corner for mounting street light

luminaire with necessary hardware materials

SUB - TOTAL OF External Lighting

Supplying & erecting approved make

Automatic liquid level controller 6A. with

sensor testing as per instruction of Engineer

7.1 1 in charge on site complete with wiring 2332.00 Job

connection with existing wires , with copper

conductor from pump to upper and lower

Supplying and erecting Flexible PVC

insulated multistrand multicore 1.1 kv grade

ISI marked copper wires of following size to

be erected as directed.

90 e) 1.50 Sq.mm 3 core round PVC sheathed 46.00 Mtr

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

7.3 erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed .

Providing & erecting water cooler having

storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚

C. The outlet temp. of the water should drop

by 15˚C within a hour, The water cooler

should be comprising of hermetically sealed

compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with

necessary inlet & outlet connection. The

body of water cooler will be made from

Stainless Steel.

Supplying and erecting water filter cum

purifier with ultra violate technology.

(Aquaguard / waterdoc model or equivalent

symphony/ crystal/videocon model)

Providing & erecting open well horizontal

mono block pump set with cast iron body,

complete for three phase submersible motor

[B] For 2 HP 3 phase open well horizontal

mono block pump set suitable for 200 LPM

@ 25 mtr head suitable for 50 mm dia

[C] For 3 HP 3 phase open well horizontal

mono block pump set suitable for 85 LPM to

270 LPM @ 11 mtr to 33 mtr head suitable

for 50/65 mm dia delivery pipe

Supplying & erecting approved make

motor control cubical panel (Direct - on -

line) made from 16 G. CRCA sheet duly

epoxy powder painted inside and outside

with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF

isolator (AC - 3/23duty) main fuses, single

phasing preventer, indicating lamps for R- Y

7.7 - B phases, overload relay, Automatic water

level controller, Ammeter, Voltmeter each

with two way selector switch incoming, wires

duly socket crimped, main contactor &

overload relay, start - stop push buttons, to

be erected on angle iron frame grouted on

wall as directed. The isolator, overload relay

& contactors will be of L & T, Siemens or

3 (a) DOL up to 5.0 H.P. 7646.00 No

Note :- Premium category:O-General,

Mitsubishi electric

Providing and erecting approved make split

air-conditioning unit consisting of copper

condensing unit with fan motor, hermetically

sealed rotary compressor with accessories

etc. duly connected separately erected

7.8 evaporating unit and blower motor with its

accessories by means of extra supplied

proper insulated copper tubing,drain PVC

pipes suitable for ( cost includes powder

coated Stand, Eco Friendly green gas

charging, 15A plug top & Remote Control)

with necessary core cutting.

(1)For ISEER Range (KWH/KWH)(3.1 to

3.99) Premium Category

2 (c) for 1.7 to 2.0 ton capacity 58706.00 No

Supplying and installing MS angle , powder

coated / Painted standard type of wall/floor

7.9 stand mount for outdoor unit of split AC of

following capacity, erected with necessary

hardware materials as directed.

(B) 35mm*35mm*5mm thick M.S angle

2 suitable for above 2 TR to 4 TR Capacity of 1496.00 No

Supplying and erecting insulated pair of soft

copper tubing including power and control

cable,necessary PVC drain pipes for Split

AC machine up to 4 TR capacity

carry out RCC Core cutting- up to 100 mm

dia./200mm thick Wall/beam/slab with

providing PVC pipe of 3 mm thick inside and

necessary finishing on both ends of wall .

SUB - TOTAL OF MISC. Work

TOTAL COST OF ELECTRICAL WORK

8 BUYBACK ITEMS

Removal and Disposal of Serviceable & Un

Serviceable Material including Cleaning Site.

The Total Responsibility and Liability of This

Removal Works Including Site Clearance

Shall Be of The Contractor. This Removal

Includes all Hidden & Exposed Electrical

Items of Building.

Buyback and Dismantle, of Existing

electrical Wiring, Switch Boards, Light

8.1 -1 fixtures,ceiling fans, Wires, Pipes, Cables 2000.00 LOT -2000.00

with all charges like loading, unloading,

trasportation etc..

Buyback and Dismantle of Existing

8.2 -1 Distribution Panel with all charges like 1500.00 No -1500.00

loading, unloading, transportation etc..

Buyback and Dismantle, of Existing

electrical street light polesand flood

lights,pole boxes with all charges like

loading, unloading, trasportation etc..

TOTAL COST OF BUYBACK ITEMS -94325.00

I. No. Qty Items Unit Rate Per Amount

Final specification and block diagram

shall be submitted by CCTV camera

SITC of 1/2.8" CMOS 3MP IP Fixed Lens IR

rugged DOME Camera having progressive

scanning system , Pixels 3MP (2304 x

1296),Lens 2.8 mm, Fixed, F1.4, Minimum

Illumination color / BW: Color: 0.002 Lux @

F1.6, BW 0 Lux IR ON,IR Distance

Mtrs,Wide Dynamic Range 130 Db,Privacy

Masking Off/On (5 Areas),Local Storage

Micro SD/SDHC/SDXC card slot (2TB),Gain

Control 0 ~ 100%,Angle of View (H x V)

H:87.2° V:49.1°,Ethernet 10 Base-T/100

Base-TX Ethernet (RJ-45),Protocols:IPv4,

IPv6, TCP/IP, HTTP, HTTPS,

RTSP/RTP/RTCP, IGMP/Multicast, SMTP,

SNMP, DHCP, NTP, DNS, DDNS, CoS,

QoS,802.1X, UPnP, mDNS(Bonjour), UDP,

ICMP, ARP, TLS, SFTP,Body Material

Aluminium + Polycarbonate,Number of

Video Streams 4,Ingress Protection IP66,

IP67, Event Notifi cation HTTPS, HTTP,

SMTP, ONVIF, Bit Rate 100 K ~ 6 Mbps

Certificates: FCC PART 15, CE (EN 55032),

ICES-003,CE (EN 55035),UL listed to

UL/CSA 62368-1, BIS IS 13252 (Part 1)/IEC

69050-1,RoHS, REACH, WEEE,BIS ER,

SITC of 1/2.8" CMOS 3MP IP Fixed Lens IR

rugged Bullet Camera having progressive

scanning system , Pixels 3MP (2304 x

1296),Lens 3.6 mm, Fixed, F1.4, Minimum

Illumination color / BW: Color: 0.002 Lux @

F1.6, BW 0 Lux IR ON,IR Distance

Mtrs,Wide Dynamic Range 130 Db,Privacy

Masking Off/On (5 Areas),Local Storage

Micro SD/SDHC/SDXC card slot (2TB),Gain

Control 0 ~ 100%,Angle of View (H x V)

H:87.2° V:49.1°,Ethernet 10 Base-T/100

Base-TX Ethernet (RJ-45),Protocols:IPv4,

IPv6, TCP/IP, HTTP, HTTPS,

RTSP/RTP/RTCP, IGMP/Multicast, SMTP,

SNMP, DHCP, NTP, DNS, DDNS, CoS,

QoS,802.1X, UPnP, mDNS(Bonjour), UDP,

ICMP, ARP, TLS, SFTP,Body Material

Aluminium + Polycarbonate,Number of

Video Streams 4,Ingress Protection IP66,

IP67, Event Notifi cation HTTPS, HTTP,

SMTP, ONVIF, Bit Rate 100 K ~ 6 Mbps,

Certificates: FCC PART 15, CE (EN 55032),

ICES-003,CE (EN 55035),UL listed to

UL/CSA 62368-1, BIS IS 13252 (Part 1)/IEC

69050-1,RoHS, REACH, WEEE,BIS ER,

Supply , Installation , Testing and

commissioning of 32 Channel NVR

(Network Video Recorder) Embedded Linux

based for recording upto 32CH at 1080P,

1.3 1 960fps with 04 nos. SATA HDDs minimum 66202.00 No

40TB storage or more (recording

requirement all cameras recording at 2MP,

25fps for 30 days), H.265

HEVC/H.264/MJPEG codec decoding, Front

Panel with LEDs Indication for Power &

HDDs Status, 3 nos. USB, ONVIF S, Time

Sync with NTP, Encrypted Streaming &

Control, 2-Way Audio Line & Out, PTZ

Operation Pan, Tilt, Zoom, Support, Pre &

Post Alarm Recording Support,

Recording/Evidence Clip Export to USB,

Channel Synchronous Playback, Playback

control i.e Play, Pause, Stop, Fast Forward,

Backward, Speed Control, Timeline & Zoom;

Snapshot, Web Client, Central Monitoring

Software, iPhone; iPad; Android based

Mobile clients, 02HDMI & 01VGA Output,

On Board HDDS each up to 10TB, Alarm

Input (16 nos.), Alarm Output (04 nos.),

RS232/485, eSATA, 256 Mbps throughput,

NDAA Section 889 Compliant, Operating

Temperature –10°C to 55°C, Certification :

Certifications: ONVIF compliant, UL/CSA

62368-1, CE (EN 50130-4), FCC Part

EN 55032, NDAA & RoHS (EN63000)

compliant. Including fixing accessories and

cable termination with required

connectors/Jack, complete in all respect as

per instruction of engineer in-charge.

Supply Installation Testing & Commissioning

of 8TB Surveillance Harddisk

Supply, Installation, Testing and

Commissioning of 43 inch, Professional LED

Display Cum Commercial TV with Android

11 & Inbuilt play store, UHD resolution,

1.5 1 nits brightness, It's 24*7 usage, 50,000 53465.00 No.

hours life, 3 years warranty, Android 11 with

inbuilt play store, Inbuilt wifi, Landscape /

Portrait mode, Inbuilt Bluetooth, 2 GB /

GB Memory, Inbuilt SOC with HDMI cable

Providing and erecting ISI mark Medium

class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling

1.6 erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in

approved manner as directed

CAT 6 UTP Cable

Supplying & erecting approved make LAN

1.7 cable of following size in existing pipe as per

Supply, Installation, Testing &

1.8.1 1 Commissioning of 9U wall mount rack. 12053.57 No

Supply, Installation, Testing &

1.8.2 4 Commissioning of weather proof outdoor 12840.00 No

SITC of O. F.Cable 06F Outdoor - Armoured

1.9 300 Unitube SM - HDPE Sheath (Including Five 50.00 Mtr

year free maintenance with guarantee)

1.10. Providing & laying approved make ISI

marked HDPE 6Kg / cm2 (Class-3) as per

IS:4984:1995 PE-80 to be erected at road

crossing on or floor as directed for laying of

cable. The pipes as following size of dia &

weight per 6 mtr.

950 (A) 40 mm inner Dia. 107.00 Mtr

SITC of LIU 12 PORT Rack Mount - Loaded

[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

SITC of PIGTAIL LC SM SIMPLEX

[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

SITC of PATCH CORD LC-LC SM DUPLEX

[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

SITC of Maximum distance of up to 10 km

Hot-pluggable Single-mode fiber 1000BASE-

LX (IEEE 802.3z standard)Duplex LC

connector MSA, RoHS-compliant

SITC of 24 x 10/100/1000BASE-T PoE ports

4 x Gigabit RJ45/SFP Combo ports

Advanced L2 switching and security features

1.15 1 L2+ Static Routing Optional “standard mode” 31680.00 No

or “surveillance mode” management user

interface 193 W PoE budget (Including Five

year free maintenance with guarantee)

SITC of 8 x 10/100/1000BASE-T PoE ports

2 x Gigabit SFP ports Advanced L2

switching and security features L2+ Static

Routing Optional “standard mode” or

surveillance mode” management user

interface 65W PoE budget

[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Supply, Installation Testing &

Commissioning 5 Mtr. HDMI Interface Cable

1.17 1 as per the detailed Specifications supports 820.00 No

transmission of 4K Signals as per the