Special maintenance of EI works in the Nazrul Kalakshetra Auditorium and outdoor illumination of premises including gate lights Agartala West Tripura

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required

Short point

Medium point

Long point

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

Wiring for circuit /Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required.

2 x 1.5 sq mm

2 x 2.5 sm mm

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required

1 x 1.5 sq mm

Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required.

25 mm dia

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

32 amps DP kit kat switch

Angle/batten holder

Ceiling rose

Supplying and fixing of the following sizes PVC switch boards with cover etc. as required.

75mm x 75mm (3" X 3")

Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required.

1-2 module plastic switch board

3 module plastic switch board

8 module plastic switch board

12 module plastic switch board

Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required.

1-2 module

3 module

6 module

8 module

12 module

Supplying and fixing of the following modular accessories including necessary connection etc. as required.

6/10 amps one way SP switch (1M)

16/20 amps one way SP switch (1M)

3/6 pin 16/20 amps socket outlet (2M)

5 step fan regulator (2M)

Blank plate (1M)

12 module 20/25 amps single phase motor starter switch (2M)

Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required.

Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.

Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required.

Providng and laying 15mm dia(medium gauge) G.I. pipe for drawing of 4.06mm (8SWG) dia G.I./ Copper wire for earth connection from earth electrodes etc as required.

Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W) : -

Supplying & installation of 400 mm sweep AC wall mounting fan with plastic blade including connection etc as required:-

Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:-

Supplying & installation of shutter for 230/300 mm sweep metalic body exhaust fan in the existing hole as required:-

Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with precise street Optic Lens with heat resistant tempered glass/diffuser protection with IP66 and IK08 impact resistance including necessary connection etc. as required (with 50000 burning hours, THD less then or equel 10% and minimum lumen output of 120 lm/watt with LM79 report from NABL accrediated lab):-

200 watt LED flood light fixture with integral driver and secondary lens, 10 KV extranal & 6 KV internal SPD:-

Supplying and fixing of recessed mounting CRCA powder coated housing 2ft x 2 ft decorative 36 watt LED panel light fixture with integral driver, inbuild SPD >= 3 kV and high quality polycarbonate diffuser having and THD <=10%, luminous efficacy of 100 lumen/watt & life expectancy of 50,000 burning hours including ncessary connection etc as required:- (with LM79 report from NABL accredited lab)

Supplying and fixing of following outdoor LED luminaries in powder coated Aluminium die cast housing complete with precise street Optic Lens with heat resistant tempered glass/diffuser protection with IP66 and IK 08/10 impact resistance including necessary connection etc. as required (with 50000 burning hours, THD ≤10% and minimum lumen output of 120lm/watt with LM79 report from NABL accrediated lab)

80 watt LED street light fixture with integral driver and secondary lens, (10kV External & 6kV internal SPD):- :-

Supply and fixing of surface mounted 18/20 watt LED tube luminaire with powder coated finished 0.5 mm thick CRCA steel sheet housing including 1 no 18/20 watt LED tube having minimum system lumen output of 120 Lumens/watt & life expectancy of 50,000 burning hours with integral driver having 2 kV SPD and polycarbonate diffuser including connection etc as required (with LM79 report from NABL accredited lab)

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt)

50 watt LED flood light fixture with integral driver and secondary lens (IP 66)

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

50 watt LED flood light fixture with integral driver and secondary lens (IP 66)12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.

(2+10) / 12 way SPN MCB DB (double door)

4 way horizontal TPN MCB DB (Double door)

Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:-

Enclosure suitable for MCCB upto 100 amps

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:-

6 to 32 amps SP MCB

Supplying & installation of isolators of following ratings in the existing MCB DB including connection etc as required:-

40 amps DP isolator

40 amps FP isolator

Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings)

16 to 100 amps TP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):-

Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required

3 core 4 Sq mm

3.5 core 50 Sq mm

Supplying and laying of following sizes XLPE insulated PVC sheathed copper conductor Un-armoured cable including necessary connection etc as required.

3 core 1.5 Sq mm

Drawing of armoured/un-armoured cable with proper saddeling etc as required:-

Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :-

Supplying and fixing of aluminium terminal ends (LUGS) - long barrel of following sizes : -

Supplying and fixing of thermoplastic cable junction box with connectors suitable for following sizes cable : -

4 sqmm - 10 sqmm Cable

Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:-

40 mm dia

Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-

Recessed /Surface square/round shaped 24 watt LED downlighter with intregral driver and highqualitypolycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt)

Supplying and fixing of following surface/recess mounted round/square shaped die cast Aluminium housing with white powder coated polycarbonate diffuser having minimum IP20 protection complete with electronic LED driver mounting clamp including necessary connection etc. as required (with 50000 burning hours,THD ≤10% and minimum lumen output of 100lm/watt with LM79 report from NABL accrediated lab)

Surface mounted round/Square shaped 12 watt LED downlight with,Internal SPD-2.5 KV.

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-( Make: Philips (Model No:31402 Muziris 7W Picture Light, Bronze colour / similar of Havells/ Bajaj as per direction site Engineer in-charge )

7W Picture / Mirror LED

Supplying, installation, testing and commissioning of 2 KVA 1ph/1ph online,double conversion, VFI-SS-111 technology, Sinusoidal UPS, IGBT based inverter and IGBT based rectifier72VDC with LCD display, ,Input: 230VAC, 50-60 Hz, Output: 4x India type 3-pin 6A outlets, 230 VAC, crest factor 3:1, converter mode,configurable bypass, Outside: 12V SMF VRLA 12V 26Ah x 6 nos battery (Exide/Quanta) , MS open Rack interlink cables, 3 mtr. cable and all other necessary accessories including connections etc. as required with 2 years Manufacturer's warranty (Make: Numeric,APC, EMERSON):-

Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with precise street Optic Lens with heat resistant tempered glass/diffuser protection with IP66 and IK08 impact resistance including necessary connection etc. as required (with 50000 burning hours, THD less then or equel 10% and minimum lumen output of 120 lm/watt with LM79 report from NABL accrediated lab):-

80 watt LED flood light fixture with integral driver and secondary lens, 10 KV extranal & 6 KV internal SPD & colour temperature 3000 K

Supplying and fixing of following outdoor decorative round shaped 45 watt LED post top luminaries in powder coated die cast housing complete with polycarbonate diffuser with IP66 protection and IK08/IK10 impact resistant including necessary connection etc. as required (50000 burning hours, THD ≤ 10% with integral driver having 5kV internal SPD and 3000K colour temperature with LM79 report from NABL accredited lab):-(Wipro model LB05 Urbano or smilar model of Phillips/ Havells)

Please Enable Macros to View BoQ information