Painting on Divider of Mal Godam Tirahe to Jauhar Hospital Road.

Mild steel or iron work in heavy sizes such as trusses, builts up gates, door, frames, record racks roof work, gates etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts. (SI no 503)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curbature, jointed with cement mortar 1:3 (1 cement 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening whereve required complete etc. as per direction of Engineer-in-charge (length of finished kreb edging shall be measured to calculate volume for payment) (Precast C.C. cerb stone shall be approved by Engineer-in-Charge) (DSR No. 16.69)

Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mised with pigment to match the shade of tiles including rubbing and cleaning etc. Complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) all complete. As per DSR No. 11.19.1 (On top of Divider) Light shade pigment using white cement.

Regrairs to plaster of thickness 12 mm to 20 mm in patches area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. With cement mortar 1:4 (Icement: 4 course sand) (DSR No. 14.1.2)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (DSR No. 13.99.1)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR No. 13.80)

Applying prime coat over new steel and other metal surface after paint including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel/wood scrappers sand paparing and knotting including coat of all and supply of all material labour and T&P etc required for proper completion of the work (As per SOR. No. 1(B) Chapter 15)

Painting two coat over previously painted surface on wood or steel and other metal surface with superior synthetic enamel paint of standard make brushing to give an even shade and finished and including cleaning the surface all durt dust and other foreing metter sand preparing and stripping including cost matter and scoured and knoting including coat of all and supply of all materials, labour and T&P etc required for proper completion of the work. (SI. No. New Item 3/3+4/3 Ch. 15)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)