SPECIAL REPAIR OF BLDG NO T-25, T-26 AND T-28 JCO LIVING ACCN OF 787 (I) AD BDE AND SPECIAL REPAIRS TO BLDG NO. PRR-218 OF 787 (I) AD BDE SIG COY UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismanteling MS works of any desc. not otherwise provided for complete all as specified.

Dismantling of timber scantlings unframed under 40 sqcm in section in fillets, rails, posts, rafters, purlins etc

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

All as per item above but fix in valley gutter / ridge,plain/corrugated.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410-W ( gde E-250)Quality A

S&F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062; 2011 as in framed work as in window grill, doors or gates of angle or other section with gusset plates, rails braces etc complete drilled for gixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing etc complete all as specified

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

Taking down cement or cement lime plaster on brick or stone walls , etc including raking out joints, hacking for key, scrubbing down with eater etc,complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:6, complete all as specified

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth in cement mortar 1:4, complete all as specified

M & L for Preparation of new previously plastered or unplastered surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M & L for Preparation of old previously plastered or unplastered surfaces of walls and applying Two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for preparation of surfaces of new plaster surface of wall and applying priming coat over two coat of cement base paint complete all as specified and directed.

M&L for preparation of surfaces of old plaster surface of wall and applying Two coat of cement base paint complete all as specified and directed.

Taking down Chowkat/frame exc 1.5 sq.m & n.exc 4 sq.m (Without taking off Shutter from the frame) including removing to store,complete all as specified.

Taking down Chowkat/frame n exc 1.5 sq.m (Without taking off Shutter from the frame) including removing to store,complete all as specified.

Taking down Shutters of any description exc 2 sq. m each and removing to store,complete all as specified.

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm.

S & F flush door shutters 30 mm thick, solid core of block boards construction, MR grade, commercial type with stiles rails and lipping of timber as given in group 2B of Annex B of IS 2202 (part 1) : 1999,, both sides face panels of plywood as per IS 710 : 2010, internally lipped complete all as specified

S&F plain framed paneled shutter 32 mm thick with locking rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneered on both face. The size of rail and style as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated 2nd class hard wood,complete all as specified.

Cutting holes in brick exc half brick but not brick one brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

M&L for Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in filling of hold fast

S&F Glazed and skeleton shutter 30 mm thick 1st class soft wood, divided into square, with plain chamfered or round mitred and rebated sash bar, any numbers prepared to receive glass, gauge etc edges of framing plain or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chowkat ,complete all as specified.

S & F Butt hinges 125 mm size medium weight cold rolled mild steel and fixed, complete all as specified

S & F Extruded Aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified

S & F 150 mm mild steel tower bolt, ISI marks, stone enameled black with bright bolt and fixed, complete all as specified

S & F 250 mm aluminum anodized sliding door bolts, ISI marked, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed

S and F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S & F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections, finished even and smooth w/o using extra cement

S & F powder coated aluminum frame for doors, windows & ventilators with one or more rebate inlcuding jointing cleats and alike for fixing complete

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, srews with powder coating of any colour (Thickness or powder coating not less than 50 micron) including stainless steel wirecloth 0.36 mm nominal dia of wire and average aperture 1.40 mm and fixed with stanless steel wire staples. and 3.0 mm th sheet glass ordinary quality plain and glazing Complete all as specified and directed.

Demolition of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed.

Demolition of concrete ( un reinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

S&F in repairs 25mm chromium plated aluminium alloy anodised curtain rod with fixed to brackets complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified

M&L for 25 mm thick plain cement concrete 1:2:4 type B-1 using (20 mm graded stone aggregate) for leveling as in sub base etc,complete all as specified.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for vitrified coloured tiles 10mm th (square/rectangular) polished area of each tile 0.30 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm th screed bed in CM 1:6 complete all as specified and directed.

Ditto above ser No 43 but on skirting over 10 mm th backing coat in CM 1:4 complete all as specified and as directed.

M&L for joint free non-skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour. over 15mm thick screed bed in CM (1:6) for floor.

Ditto above ser No 45 but on skirting over 10 mm th backing coat in CM 1:4 complete all as specified and as directed.

M&L Non skid ceremic coloured tiles 7 to 8mm thick (square/rectangular)area of each tile exc. 0.06sqm but not exc. 0.11sqm, in floors etc , set and jointed in neat cement sluury and pointed in white or coloured cement to match the coloured tiles including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and as directed.

M&L for glazed coloured ceramic tiles 300x200x 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement incl backing coat 10mm thick in CM 1:4 complete all as specified and directed.

M&L for glazed coloured ceramic tiles 350 mm x 250mm/450mmx350x7 to 7 mm thick as in vertical surfces set & jointed in neat cement slurry & pointed in coloured cement with & including backing coat 10mm thick in CM 1:4 complete all as specified and directed.

M & L PCC type D2 1:4:8 (40 mm Gr. Agg ) 75mm thick as in sub base complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming all as specified.

M& L Chequared Cement Concrete Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 .complete all as specified.

M &L for MS work as in wind tie or any other work including cutting, drilling holes etc.

S & F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 1000 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 15mm etc all as specified and directed by Engr-in -charge.

Taking up or down steel tubes and connections including cleaning for refixing or removal to stones bore of pipe 20mm etc all as specified and directed by Engr-in -charge.

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 15mm

M&L GI tubes, medium grade with all fittings and fixed complete to walls, ceiling or laid in floors, bore of pipe 20mm

S & F in repair bib taps cast copper alloy with capstan headscrewed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe.

S &F in repair pillar taps fancy type ,chromium plated with capstan heads screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe.

S&F in repair Vitreous china wash basin white flat back size 580 x 450mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand alongwith 32mm dia CP waste coupling and PVC waste pipe in repairs complete all as directed.

S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and directed.

S&F as in repairs PVC low/high level flushing cistern white 10 ltrs capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. Note Removing existing fluhing system of CI or any other quality incl brackets all as specified and as directed.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs incl P or S trap complete all as specified and as directed.

Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed.

M & L in repairs 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps

S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and directed.

S&F, Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed.

Material & labour for two coats of synthetic enamelled paint on old steel surfaces exc 10cm width or girth including preparation of surfaces.complete all as specified and directed by Engr In Charge.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches.

M&L for reinforced cement concrete pipes class NP-3 , laid in trenches & jointed complete with collars, dia of pipe 100 mm .

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 100 mm bore RCC pipe.

S & F 110 mm dia bore PVC (SWR) bends any radius

Dismantling water tanks and removing to site exc 500Ltr but n. exc 1000Ltr capacity.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Dismantling timber scantlings 40 sq. cm and over in section, in any position for complete all as specified.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

All as per item above but on skirtings incl 10 mm th rendering in CM (1:4) complete. complete all as specified and directed.

S & F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

M & L for Reinforce cement concrete Type B1 1:2:4 (20 mm graded aggregate) Beams, cantilevers, bressumm ers, lintels over 1.5m spcomplete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, bands, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should bemade as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking down old point wiring and M&L for point wiring with 1.5 sqmm multistranded copper conductor cable of PVC insulated and unsheahed type alongwith 1.5sqmm PVC insulated unsheathed single stranded copper conductor cable for continous earthing in & incl casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/(MS steel strips if required) including hard PVC boards of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator setc for Note:- Screws used for fixing PVC boards, casing & caping ceilling rose square blocks etc should be nickel cadmium screws:-

(a) One light point controlled by one switch

(b) One fan point controlled by one switch & regulators

(f) One socket 5 pin 5 Amps flush type on independent board

(f) One socket 5 pin 5 Amps flush type on same board

M&L for point wiring with 2.5 sqmm single core multistranded copper conductor cable of PVC insulated and unsheathed type alongwith 2.5sqmm PVC insulated unsheathed single core multistranded copper conductor cable for continous earthing in & incl PVC casing / caping or PVC Pipes & accessories having ISI marked surface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc for Note:-color coding to be followed as given R-Phase,B-Neutral & G- Earthing

S & F in repair submain wiring with cable insulated single core multistranded copper conductor cable 1100 volts 2x 4 sqmm drawn through & incl PVC casing caping / PVC conduit of suitable size alongwith 4.0 sqmm copper conductor cable for earth continuity. (Note : 2 runs of 4.0 sqmm cable, one run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one RM).

S&F switch piano flush type single pole one way 5 Amps

S&F switch socket combination 2 in 1, 5 Amps flush type

S&F switch socket combination 2 in 1, 15 Amps flush type

S&F ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on PVC block

S&F regulator electronic step type for ceiling fans suitable for AC 230 volts 50 Hz 1200 / 1400mm sweep

MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way

Supply and fix in repair MCB DB TPN sheet enclosure double door Vertical type suitable for mounting MCB with 415 volts with 200 Amps rated busbar 12 way

supply and fix in repair isolator TPN 40 Amps 415 volts Make -Legrand/L&T

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP , 5- 32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN ,32 amp to fit in the MCB DB complete with connection testing and commissioning.

Supply and fixing LED luminaire 2X2, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete..Make : Philips/ Bajaj/ /Crompton

S&F wall mounted decoration lights ,20 watts including driling of wall ,fitting of light on the wall with necessary accessories all as specified and directed by engr in charge . Make :-Make:- Philips/Havells/Bajaj/Crompton

Supply and fixing LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F in repair Supply and fixing LED street light fitting 35/40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store.

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan.

Replacment / Repair of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Make :- Havells/Bajaj/Crompton

Material and labour for replacement of unserviceable street light bracket made out of GI pipe 1.2 mtr long 40mm dia medium grade bent to shape as directed including MS clamps made out of 40mmX6mm flat iron for fixing bracket suitable for PCC/ street poles including nuts and bolts of required size all as directed incl taking down of old unserviceable bracket.

M&L for earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick burried burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level duly connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plare No 3,connected to earthing test point all as specified or indicated including testing on completion including excavation and earth work in any strata,PCC Chamber with cover,Charcoal and Salt as required & 15 mm Light Grade GI pipe from steel plate to DB in order to ensure satisfactory earth resistance result to the entire satisfaction of Engr-in-Charge.

Supply,laying,jointing , testing and commisioning XLPE cable 1100 volts grade PVC insulated armoured & PVC sheathed with stranded aluminium conductor heavy duty ISI marked incl cable glands lugs bolts nuts washers etc to suit the cable size to be laid in trenches fixed along pole, LT pannel floor bore or through GI pipe laid under floors, Fixed, concealed in wall encased in GI pipe etc complete of 16 sqmm x 4.0 core including taking down old unserviceable over head conductors and insulators channels carefully as directeed by engineer in charge

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out Soft / loose soil all as specified and directed :-

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed by Engineer -in-Charge.

M & L for HDPE DWC pipe ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection 50 mm dia outer dia Make:-Infra/Supreme/Prince

M & L of new Gl steel tube Light grade galvanized of size 80 mm dia with all fitting laid in trenches complete and all as specified and directed by Engr in charge. Make : Jindal/ Tata/ Prakash Surya/ Ravindra./Swastik

M/S B.A. GAIKWAD

Dinesh Constructions

Santhi Enterprises

RAMESH PATIL

DR J S CHADHA AND SONS

Ridhi Constructions