8361 MAINT AND REPAIR TO CERTAIN STEEL FURNITURE UNDER GE(EAST) BAREILLY

Amount

Tepoy Verandah (FD-383) S & F of the following components of tepoy varandah including dismantling of old unservicable one complete all as specified, directed and as shown on drawing: -

(a) Top made of 18 mm thick Prelaminated MDF Board exterior grade covered with 6mm thick half round teak wood beading fixed with fevicol and headless nails all round the edges duly polished.

(b) Mild steel flat iron of size 25mm x 3mm thick.

(c) PVC shoes.

Chair Verandah (FD-359) S & F of the following components of chair verandah including dismantling of old unservicable one complete all as specified, directed:

(a) Recaning the chair fully both seat and back with new plastic cane, white, half round of size 4 mm wide of approved quality.

(b) PVC shoes.

Chair Writing Steel (FD/E6/MAP/12) S & F of the following components of chair writing steel (approved quality) including dismantling of old unserviceable one complete all as specified and directed.

(a) Seat and Back.

(b) Handle (PU soft).

Book Case Steel (FD-1028) S & F of the following components of book case steel including dismantling of old unserviceable one complete all as specified and directed: -

(a) 1.25 mm thick mild steel channel.

(b) Iron cleat stoper 20mm X 10mm.

(c) 3 mm thick plain glass.

Chair School Hand Board (FD/E6/MAP/05) S & F of the following components of chair school hand board having original pattern of different make and model including dismantling of old unserviceable one complete all as specified and directed: -

(a) Hand board made of 18 mm thick prelaminated MDF board white in colour both sides and covered with 6 mm thick half round teakwood beading fixed with fevicol and headless nails all round the edges duly polished.

(b) PVC Frame (Seat & Back) as per existing pattern

(c) PVC shoes.

Table Bed Side (FD/E6/MAP/15) S & F of the following components of table bed side including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Top made of 18mm Prelaminated MDF board covered with 6mm thick half round teakwood beading fixed with fevicol and headless nails all round the edges duly polished.

(b) Small drawer with telescopic channel.

(c) Large drawer with telescopic channel.

(d) CP Handle size 75 mm.

(e) Side made of 18mm thick Prelaminated MDF Board exterior grade.

(f) PVC shoes.

Rack Shoe Steel {FD/E6/MAP/02(R)} S & F of the following components of rack shoe steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) 25 mm dia mild steel pipe for main frame.

(b) 700x300mm size frame of welded wire mesh made of 3 mm dia mild steel wire consisting of 9 rows in one side and 3 rows in other side as per drawing.

(c) PVC shoes.

Chair Steel Tubular With/Without Arms (FD-75) S & F of the following components of chair steel tubular with / without arms made of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2 mm width and borders with 4 mm wide plastic cane fixed with screws 7.5 cm long (4 Nos. duly fitted with one nut and one washer) to fixed the chair frame complete all as specified, directed and shown on drawings including dismantling of old unservicable one: -

(a) Seat frame.

(b) Back frame.

(c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

(d) 50 mm long flat iron piece made of 25 X 4 mm flat duly welded at four corner of seat and back to support and screwed with the seat at two places.

(e) PVC rubber cap on back of chair frame where ever required at the top of frame.

Bed Hard Steel (FD/E6/MAP/08) S & F of the following components of bed hard steel including dismantling of old unservicable one complete all as specified, directed and shown on drawing: -

(a) 12 mm thick BWR grade phenol bonded commercial plywood on top of the bed.

(b) Head board made of 18 mm thick prelaminated MDF board including 04 mm thick PVC beading as per drawing.

(c) Foot board made of 18 mm thick prelaminated particle board including 04mm thick PVC beading as per drawing.

(d) PVC shoes.

Table Office Officer/Clerk Steel (FD-84, 1003, 1004) S & F of the following components of table office officer/clerk steel including dismantling of old unservicable one complete all as specified, directed and as shown on drawings:

(a) Drawer made of 1 mm thick mild steel sheet.

(b) Lock 6 lever with duplicate keys (Make Harison/Godrej).

(c) Side panel made of 1 mm thick mild steel sheet.

(d) Top for table office officers made of 18 mm thick pre-laminated MDF board one side teak face covered with 6 mm thick half round teakwood beading fixed with fevicol and headless nails all round the edges duly polished.

(e) Top for table office clerks made of 18 mm thick pre-laminated MDF board one side teak face covered with 6 mm thick half round teakwood beading fixed with fevicol and headless nails all round the edges duly polished.

(f) PVC shoe.

Almirah Steel Medium (FD 243/1032) S & F of the following components of almirah steel medium including dismantling of old unservicable one complete all as specified, directed and as shown on drawings: -

(a) Lock 6 lever with duplicate keys (Make Harison/Godrej).

(b) CP handle 100 mm size.

(c) 3 way locking device.

(d) Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed.

(e) Door shutters made of 1 mm thick mild steel sheet.

(f) Shelves made of 1 mm thick mild steel sheet.

Almirah Steel Large (FD-67/1031) S & F of the following components of Almirah steel large including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Lock 6 lever with duplicate keys (Make Harison/Godrej).

(b) CP handle 100 mm size.

(c) 3 way locking device.

(d) Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed.

(e) Door shutters made of 1 mm thick mild steel sheet.

(f) Shelves made of 1 mm thick mild steel sheet.

Locker Steel (FD-257/1029) S & F of the following components of locker steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) CP 'D' type Handle 100 mm size.

(b) CP Hasp and staple 75 mm size.

(c) CP hanging rod 20 mm dia.

(d) Leg made of 1 mm thick mild steel sheet duly welded/riveted as directed.

(e) Door shutter made of 1 mm thick mild steel sheet.

Table Computer MAP (FD/E6/MAP/03)/TP S & F of the following components of table computer MAP/TP including dismantling of old unservicable one copllete all as specified, directed and shown on drawings.

(a) Top made of 18 mm Prelaminated MDF Board with PVC edging.

(b) Shelves/bottom made of 18mm thick prelaminated MDF Board with PVC edging.

(c) Drawer with telescopic channel.

(d) Pull out tray with telescopic channel.

(e) CP Drawer knob.

(f) Side of table.

(g) PVC shoes.

Chair Trade Pattern (Revolving High/Medium Back/ Computer)

(a) Material & Labour for re-upholstering of seat and back with new tapestry cloth of approved quality including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed.

(b) S&F of 75 mm thick new seat and 50 mm thick new back cushion of 32 density PU approved quality foam duly covered with new tapestry cloth of approved quality including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed.

(c) S&F of Hydraulic system of suitable size and design as per original Pattern of different Make and Model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed.

(d) S&F of handle of chair (PU Soft) of suitable size and design as per original pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed.

(e) S&F of suitable castor wheel to chairs revolving as per original Pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed.

(f) S&F of wheel base including five Nos. of castor wheels to chairs revolving as per original pattern of different make and model including dismantling of old unserviceable one for chair revolving high/medium back/ chair computer of different make and model complete all as specified and directed.

Table Dinning ORs Steel {FD-165 (R)} S & F of the following components of table dinning ORs steel including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Table top made of 18 mm thick prelaminated MDF board exterior quality of Choco Cross line shade including provision of 4 mm thick teakwood beading all around of the top.

(b) PVC shoe.

Table 3'x2' with Drawer (FD-1008) S & F of the following components of table 3'x2' with drawer including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Table top made of 18 mm thick prelaminated MDF board exterior grade with 6mm thick half round teakwood beading fixed with fevicol and headless nails all round the edges duly polished.

(b) Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick.

(c) Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick.

(d) Long rail/siffner of conduit pipe 25 mm 1.6 mm thick.

(e) Lock 6 lever with duplicate keys (Make Harison/Godrej).

(f) Drawers made out of 1mm thick MS sheet.

(g) PVC/Hard rubber shoes.

Table 3'x2' without Drawer (FD-1007) S & F of the following components of table 3'x2' without drawer including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Table top made of 18 mm thick prelaminated MDF board exterior grade with 6mm thick half round teakwood beading fixed with fevicol and headless nails all round the edges duly polished.

(b) Leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick.

(c) Short rail/stiffner of conduit pipe 25 mm 1.6 mm thick.

(d) Long rail/siffner of conduit pipe 25 mm 1.6 mm thick.

(e) PVC/Hard rubber shoes.

Charpoy GI Pipe (FD-220) S & F of the following components of charpoy GI pipe including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Long rail made of 32 mm bore GI tubing medium grade ISI marked 1.88 metre long, threaded at both ends and fixing to 3 way 32 mm size GI elbow of charpoy.

(b) Conversion of 32 mm bore long rail obtained from dismantling of item No. 19.01 above into two numbers short rail after cutting and threading both ends and fixing to 3 way 32 mm dia existing elbow.

(c) Conversion of 32 mm bore short rail obtained from dismantling of item No. 19.02 above into two number legs including fixing to 3 way 32 mm dia at one end threaded and cover the other end with hard rubber / PVC shoe.

(d) Check nuts of 32 mm dia.

(e) 3 way 32 mm dia GI elbow ISI marked.

(f) 12 mm BWR grade phenol bonded commercial plywood of size 2000 mm x 900 mm including providing 50 mm wide strip made out of 6 mm thick plywood for filling gap between plywood sheet and short rails including replacement of nut-bolts as required for fixing of plywood.

(g) Mild steel flat iron of size 40x4 mm, length suitable to connect both long rails to support ply top with two Nos. Nut-bolts and double washers.

Charpoy IP with Hard Top (FD/MAP-II/01) S & F of the following components of charpoy IP with hard top (MAP) including dismantling of old unservicable one complete all as specified, directed and shown on drawings: -

(a) Leg 440 mm high, made of 32 mm X 32 mm square mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship.

(b) Long rail 1916 mm long, made of 65 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship.

(c) Short rail 836 mm long, made of 65 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship.

(d) Stiffner any type 836 mm long, made of 25 mm X 25 mm rectangular mild steel pipe having wall thickness of 16 gauge duly fixed with gas welding and standard workmanship.

(e) Mild steel clip of size 60 X 25 X 6 mm, made to shape as required, fixed duly welded to frame of charpoy.

(f) 12 mm thick (consisting of 7 Nos ply) BWR grade phenol bonded commercial plywood of size 1916 mm X 836 mm, fixed with 10 Nos nut-bolts of size as required and directed.

M & L for running gas or electric welding as per site requirement, to make good the loose joints complete all as specified and directed.

M & L for mild steel square pipe of size 25mmx25mmx1.60mm wall thickness as in any part of steel furniture in any length as required, duly welded to the existing frame including dismantling of old unserviceable one complete all as specified and directed.

M & L for mild steel conduit pipe 20 mm bore, having 1.60 mm wall thickness as in any part of steel furniture in any length as required, duly welded to the existing frame including dismantling of old unserviceable one complete all as specified and directed.

M & L for preparation of the following old painted steel furniture articles of any description and in any position, filling cavities with necessary putty or other fillars to achieve even and smooth suface and applying one coat of synthetic enamel paint to achive surface even and smooth in glossy finish complete all as specified and as directed: - NOTES: - (i) Painting work shall be carried out all around on the complete exposed surface including internal parts like shelves, drawers, stiffners, partions etc. with spray painting process. (ii) Newly replaced parts shall be treated with one coat of red oxide primer before painting work and cost of the same deemed included in the unit rate of these items. (iii) Cost of removing of all dent and correcting of deshaped profiles shall deemed to be included in the unit rate of these items. (iv) Surface and site shall be made neat and clean by the contractor. (v) Work shall be carried out within the area of GE (East) Bareilly, Furniture yard of BSO as per direction of the Engineer-in-Charge.

Teapoy verandah steel FD-383

Chair verandah steel FD-359

Chair writing steel (FD/E6/MAP/12)

Book case steel FD-1028

Chair school hand board (FD/E6/MAP/05)

Table bed side (FD/E6/MAP/15)

Rack shoe steel FD-E6/MAP/02(R)

Chair steel tubular with arms FD-75

Chair steel tubular without arms FD-75

Bed hard steel (FD/E6/MAP/08)

Table office clerks steel FD-1004, FD-84

Table office officers steel FD-1003, FD-84

Almirah steel medium with shelves FD-1032, FD-243

Almirah steel large with shelves FD-1031, FD-67

Locker steel FD-1029, FD-257

Table dinning ORs FD-165(R)

Table 3'x2' with drawer (FD-1008)

Table 3'x2' without drawer (FD-1007)

Charpoy GI pipe (FD-220)

Charpoy IP with hard top MAP (FD/MAP-II/01)

D K THUKRAL AND SONS (BID ID -3154022)

M/S SRIKSHTI SALES CORPORATION (BID ID -3150919)