Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹34.1 L+₹38,132.50 (1.13%)Rejected-AOC | L2 | Rejected-AOC Rejected being not L1 | |
| 3 | L3₹34.4 L+₹74,675 (2.22%)Rejected-AOC 20 C RAGHUVANSH ENCLAVE KALIDAS ROAD DEHRADUN | L3 | Rejected-AOC Rejected being not L1 | |
| 4 | L4₹34.9 L+₹1.2 L (3.50%)Rejected-AOC GALI NO 3 AZAD COLONY MAZRA HARIDWAR ROAD DEHRADUN UK INDIA NO E 29 HQ CWE DDN | L4 | Rejected-AOC Rejected being not L1 | |
| 5 | L5₹37.0 L+₹3.3 L (9.86%)Rejected-AOC 93 BAPUJI NAGAR ITC ROAD SAHARANPUR 247001 UP | SAHARANPUR | UTTAR PRADESH | 247001 | L5 | Rejected-AOC Rejected being not L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Roorkee
Garrison Engineer Military Engineer Services Roorkee
COMPREHENSIVE MAINTENANCE TO OTM ACCN UNDER AGE BR III IN GE ROORKEE
2022_MES_526437_1
8392/169/E8
Open Tender
Civil Works
Item Rate
180 days
Roorkee
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Roorkee
₹90,000
6 Oct 2022
26 May 2022
25 Jun 2022
26 May 2022
23 Jun 2022
9 Jun 2022
60 days
Amount
S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:6 including Dismantling floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
S&F vitrified ceramic tiles 10mm thick (square/ rectangular) polished, light shade, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 sqm, in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in as in vertical surface like dado/ skirting etc including 15mm thick rendering(backing coat) in CM 1:4 including Dismantling wall tiling including cement mortar backing plaster removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for non skid joint free coloured ceramic tiles 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M&L for joint free coloured glazed ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 including Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
S&F granite( of any type) stone slab of 20mm thick laid over 15mm thick cement screed bed in CM1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and dismantling complete all as specified and directed.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) using course sand confirming to IS 2116-1980 complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) using course sand confirming to IS 2116-1980 complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on brick walls finished over and fair without using extra cement complete all as specified and directed.
Demolition of concrete/tiles/kota etc in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.
M&L 75 mm thick cement concrete 1:3:6 type C-2 (40mm graded aggrete) as in plinth protection/path finish even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type B- 2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63mm with broken stone and boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment over 20 mm thick sand complete all as specified and directed.
M&L Cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed with gray cement and pigment set jointed and pointed in neat cement slurry in floors, and cut and polished over and including 20mm thick screed bed 1:6 CM complete all as specified and directed.
M&L for pavement ceramic tile (min size 300 x 300 mm) and 8 to 10 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over 15mm thick rendering in CM 1:4 on 25 mm thick PCC 1:2:4 Type B-0 using 12.50mm graded stone agg, complete all as specified and directed.
M&L Machine cut kota stone slab flooring 20-25mm thick over and incl 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 100mm with marble border including rubbing and polishing complete all as specified and directed.
All as per item No 17 above but for skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded aggregate) as in copping, benching of manhole / drain slightly rounded or chamfered angles and throating, as directed incl finish the surfaces smooth without using extra cement incl demolition of unrenforced cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed.
M&L PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and in surface channels and drain complete all as specified and directed.
Dismantling and taking down existing water tank and S&F Rotational moulded polyethylene water storage tanks (ISI marked) (cylindrical vertical with closed top) triple layer of 500 Ltrs capacity including 20mm dia bore PTMT ball valve, hoisted and fixed in position and making all necessary connections with and including connectors of suitable size complete all as specified and directed.
All as per item No 21 above but 1000 ltrs capacity.
S&F in repairs, 20mm dia bore ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs, 15 mm dia bore PTMT bib tap (Mini weight 90 gms) and fixed complete all as specified and directed.
S & F in repair 15 mm bore stop valves/ angle valve of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 110 Gms) complete all as specified and directed.
S&F in repairs Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.
S & F brass CP mixer ( basin mixer) for mixing hot & cold water screwed down for 15 mm dia iron pipe complete all as specified and directed. (Model : 8951 Make : Prayag OR EQUIVALENT RANGE OF Jaquar, Sparsh Pearl).
S & F in repairs brass chromium plated bib tap (short body) for iron pipe of 15 mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.
S&F in repairs stop/angle cock 15 mm bore ISI marked fancy type chromium plated, screw down high pressure with crutch or butterfly handle screwed both ends suitable for iron pipe of 15mm bore complete all as specified and directed.
S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete all as specified and directed.
S&F in repairs, vitreous china squatting pan 'Orissa pattern' long pan of size 580x440mm white, with integral footrest & 'P' or 'S' trap including connection to trap, flushing pipe, anti-syphonage pipe etc and making good the floor to match with the existing surfaces complete (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F Vitreous China urinal half stall type flat back of size 590 mm x 375mm x 390 mm white (minimum) with CP waste fitting grating and union for discharge pipe (excluding flusing cistern, flush pipe ) including urinal spreader of CP and PVC waste pipe of adequate length complete all as specified and directed.
S&F in repairs, vitreous china wash down water closet pan (Pedestal pattern) white incl 'P' or 'S' trap and making good the disturbed surface to match with the existing flooring complete all as specified and as directed.
S&F in repairs, plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.
S&F in repairs Jet Spray with 1.5 Mtr flexible tube complete all as specified and directed.
S&F in repairs, health faucet 8 mm dia 1.20 mtr long flexible tube and wall hook complete all as specified and directed.
S&F in repairs, brass CP brass toilet paper holder and fixed complete all as specified and directed.
S&F PVC waste pipe of standard pattern, not less than 75cm long , 32/40mm dia for steel sink including waste coupling for sink/ urinal of suitable size complete all as specified and directed.
S&F in repairs, brass chromium plated 600mm long and 20mm dia towel rail 'D' type, fixed to wall with CP steel screws with wooden gutties embedded in cement morter 1:3 etc complete all as specified and directed.
S&F in repairs, mild steel chromium plated grating (round) 125 mm dia fixed in cement mortor 1:3 over floor/nahani trap (with hole or without hole) complete all as specified and directed.
S&F in repairs, vitreous china wash hand basin, white flat back size 550 x400 mm excluding pillar tap but including waste coupling, waste pipe and a pair of MS bracket painted with 02 coats of synthetic enamel paint over 01 coat of red oxide primer etc complete all as specified and directed.
All as per item No 41 above but WHB with pedestal any any colour as approved complete all as specified and directed.
S&F in repairs, 15 mm dia bore brass CP pillar tap (with Aerator) with long screwed shank & fly nut, capstan head, screwed down, high pressure with or without lettered hot or cold complete all as specified and directed.
S&F in repairs, PVC connection 450mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs, PVC connection 600mm long with brass check nuts & washers at both ends suitable for 15mm bore pipe complete all as specified and directed.
S&F in repairs CI floor trap 100mm dia with CP grating including jointing to waste pipe complete all as specified and directed.
S&F in repairs CP brass shower rose 125mm size with shower arm suitable for 15mm bore pipe complete all as specified and directed.
S & F in repair wall mixer with'L' bend (Provision for OH shower) 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs, 15mm dia bore brass CP stop cock long shank, fancy type with cup (concealed type), high pressure, screwed both ends, fixed to iron pipe or brass ferrule complete all as specified and directed.
S&F in repairs, 25 mm dia stainless steel fancy type curtain rod in suitable size with and including stainless steel fancy type brackets, stops of matching colour and necessary curtain rings, side caps etc complete all as specified and directed. Note: The quoted rate is deemed to be included for 01 pair of brackets for length of door/window/opening.
S&F in repairs, 15mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceilling or laid in flooring including connection etc including taking down old tubing complete all as specified and directed.
S&F in repairs, 20mm bore GI tubing (ISI marked), medium grade with all fittings and fixed to walls and ceiling or laid in floor including taking down existing tubing complete all as specified complete all as specified and directed.
Fixing only 15 mm bore tubes and connections medium grade in new or old position to walls, ceiling or laying in floors including taking up or down existing tubing complete all as specified and directed.
Fixing only 20 mm bore tubes and connections medium grade in new or old position to walls, ceiling or laying in floors including taking up or down existing tubing complete all as specified and directed.
S & F cutting chases, pinning in brick wall , making good to facing where required and pointing in CM 1:3 to ends or edges of slabs and making good cutting exc. 10 cm but n.exc 20 cm girth. Etccomplete all as specified and directed.
M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chromate primer complete all as specified and directed.
M & L for providing 15 mm thick rendering with cement mortar 1 : 6 finished even and smooth (without using extra cement) including taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
M & L for providing 15 mm thick rendering with cement mortar 1 : 4 finished even and smooth (without using extra cement) complete including taking down cement or cement lime plaster from brick or stone walls etc incl. racking out joints, hacking for keys, scrubbing down with water etc all as specified and directed.
M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- 1. The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of emulsion paint. The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
(ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). after carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE (vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor complete all as specified and directed.
M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of wall putty using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge. Note:- (i) The new surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted.
(ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture. (iv). After carrying out preparation of surface the same shall be got approved from GE before application of distemper for each building. (v). The colour / shade will be all as approved by GE
Dismantling timber framed scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
S&F rolled mild steel in joist, channel, angle or tee sections fixed independently , without connecting plates etc quality conforming to Fe 410 W (Gde E-250 quality A) including dismantling of iron complete all as specified and directed.
Dismantling asbestos cement corrugated or semi corrugated sheet in roof and removal from site for taking into schedule of credit complete all as specified and directed.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
S&F 6mm thick two piece AC serrated ridges for corrugated sheet with 'L' type or 'J' type hook or cranked bolts complete all as specified and as directed.
S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F in repairs pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC roof sheeting complete all as specified and directed.
S&F in repairs pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing AC roof sheeting complete all as specified and directed.
M&L for Providing and fixing tiled false ceiling of designer tiles(high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and approved design ( Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles Contd....
and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash through fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, at all heights as per directions Dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillet and removal from site for taking into schedule of credit complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall using GI clamps of size 40mm x 2 mm including taking down complete all as specified and directed.
S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to wallusing GI clamps of size 40mm x 2 mm including taking down complete all as specified and directed.
S&F PVC (SWR) bends suitable for 110mm bore pipe complete all as specified and directed.
S&F PVC (SWR) bends suitable for 75mm bore pipe complete all as specified and directed.
Providing and fixing PVC SHEET WALL PANELLING of thickness 5mm (+0.25) consisting of panels of approved size stuck on inner frame work of 50 mm wide strips of 5mm(+0.25) thick prelam PVC sheet. The Panel and strips shall be of 600 kg per cum density manufactured by an ISO-9000 certified company. The strips should have in their centre a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 250mm between two PVC strips.
The PVC strips shall be fixed to the wall using 65 mm long stainless steel screws through the groove in the strip by using PVC fasteners. he distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of wall. Optionally a strips of 5mm (+0.25) thick PVC sheet of width 75mm feathered at the edges shall be stuck at places where two panels are joined, using solvent cement, complete at all heights as per directions including dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillet and removal from site for taking into schedule of credit complete all as specified and directed.
S & F in repairs for stainless steel peg set of six complete all as specified and directed.
Easing of wooden window shutters /CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening, fixing of stays, cleat etc, tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolt etc. complete all as specified and directed.
Easing of wooden door shutters (One unit shall comprise of one door shutter irrespective of number of leaves) for properly closing/opening, fixing of stays, cleat, door stopper etc, tightening of hinges or changing the position of hinges, adjustment of tower bolts sliding bolt etc. complete all as specified and directed.
Easing of steel window shutters (One unit shall comprise of one window irrespective of number of leaves) for properly closing/opening, welding of hinges or handles (including of handles/ hinges if required) or changing the position of hinges, complete all as specified and directed.
M & L in repair for fixing of magnet catch suitable for cupboard shutters, shelfs etc complete all as specified and directed.
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
Taking down alluminium door/ window complete shutter with/ without frame as per requirement and repair to butt hinges/ screw (incl S&F new hinges/ screw/ rubber beading if required) and refixed same to frame / wall complete all as specified and as directed.
S&F in repairs Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.
S&F in repairs, double action floor spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty complete all as specifies and directed.
S&F in repair 5mm thick tinted glass fixed in Aluminum door/ window shutter fixed with rubber beading complete all as specified and directed.
S&F self adhesive flash strip suitable for packing of holes/ cracks of AC sheet complete all as specified and directed.
M & L precast cement concrete type B-0, 1:2:4 (12.50 mm Graded stoe aggregate) for louvres and jallies,35mm thick (measured solid), including all mouldings set in cement mortar 1:4 complete all as specified and directed.
SR CONSTRUCTIONS
shreyansh construction
M/S GIRI CONSTRUCTION CO.
G.H. INFRASTRUCTURE PRIVATE LIMITED
SMG Construction
VIMAL CONSTRUCTION CO
Bhardwaj Construction Co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .