PROVIDING AND FIXING OF PLYWOOD PANELS TO EXISTING COTS IN HOSTELS AND AUXILIARY FURNISHINGS AT IISER TIRUPATI CAMPUS, YERPEDU.

Providing and fixing Fire retardant BWP Grade Plywood Thickness 12 mm as per IS 710 on existing metal cot frame including cutting, drilling, screw fixing, shifting within premises, one coat of wood primer and two coats of synthetic enamel paint of approved shade and make complete as per the specifications and as directed by Engineer-in-Charge Plywood to be provided with 25 years warranty.

Providing and fixing of study table of size 900mm(L) x 600mm (D) x 750mm (H) The table top should be made from medium density fibre board (Treated for Fire resistance, Water resistance & Termite resistance) of thickness not less than 25 mm with laminate not less than 2mm with factory pressed edge binding on all sides, the shade/pattern of the laminate needs to be got approved before manufacturing. The edges of the table shall be rounded with no sharp edges. The understructure shall be made of C-frame with an additional leg welded to the C-frame as shown in the fig above with shall be made of MS square hollow section of size 40mm × 40 mm of thickness not less than 2mm with dimensions. The Table top supporting member shall be of a MS rectangular hollow cross-section of 40 × 20 mm with thickness not less than 2 mm which should be welded at the middle legs of the C-frames. Footrest should be made from 35 mm MS circular tube with thickness of 1 mm and welded to the middle legs of the table. Nylon bushes shall be of high quality with level adjustment option and which has high impact & vibration resistance with minimum 4 No's. All the steel section shall be powder coated with 60μ to 80μ. Product warranty shall be for a period of 5 years. Product should be AIOTA and IAQ Gold certified for inhouse air quality. The manufacturer should have ISO9001, ISO14001, ISO45001, ISO50001 from NABCB accredited agency, ZED gold certified and a member of BIFMA.

Providing & Fixing Conference Table with following details and specifications : Table Size 6500mm x 1350mm x 750mm. Table top shall be made of 36mm thick prelaminated particle board of E1 grade, designed in a boat-shaped profile, and finished with a chamfered edge on all four sides for a premium appearance and enhanced user comfort.. Grains of the table top to be unidirectional. The Modesty panel is made of Prelam Particle board Grade E-1 (Environmental Friendly) of thickness 18 mm pre -laminated particle board with Edge-Banding(PVC) 2 mm. The understructure shall consist of a wooden box-type cable management unit, positioned centrally below the tabletop, featuring one side openable door for maintenance, routing of cables, and access to internal wiring pathways. Supporting the table top shall be a robust U-Type tapered leg with MS-sheet exterior frame and melamine wood-finish panels (front & back), fabricated from high-strength steel, designed for stability and durability, and finished with a scratch-resistant powder-coated surface. Wire management: Completely concealed wire management with Aluminium anodized flipper (4 nos) with soft closure, wiring tray & beams Made from MS sheet 2 mm. shall be provided, flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable cover. Wire seperator for data provided in cable tray below flipper and and with power pole for vertical movement of wires through junction box. E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Product warranty shall be for a period of 5 years. Product should be AIOTA and IAQ Gold certified for inhouse air quality. The manufacturer should have ISO9001, ISO14001, ISO45001, ISO50001 from NABCB accredited agency, ZED gold certified and a member of BIFMA. Shade of the table top, powder coating , flipper shall be placed for approval.

Providing & Fixing Conference Table with following details and specifications : Table Size 6200mm x 1800mm x 750mm. Table top shall be made of 25mm thick prelaminated particle board of E1 grade, designed in an 'U'-shaped profile (as depicted in the specification), and finished with a chamfered edge on all four sides for a premium appearance and enhanced user comfort. Grains of the table top to be unidirectional. The Modesty panel is made of Pre lam Particle board Grade E-1 (Environmental Friendly) of thickness 18 mm pre -laminated particle board with Edge-Banding(PVC) 2 mm. The understructure shall consist of a wooden box-type cable management unit, positioned centrally below the tabletop, featuring one side openable door for maintenance, routing of cables, and access to internal wiring pathways. Supporting the table top shall be of adequate number of 25mm thick prelaminated particle board such that the load bearing capacity is 200kg/sqm. Wire management: Completely concealed wire management with Aluminium anodized flipper (9 nos) with soft closure, wiring tray & beams Made from MS sheet 2 mm. shall be provided, flange structure epoxy powder 70-80 micron coated spray color, baked at temperature 200c with vertical wire uptake from floor via middle leg having removable cover. Wire seperator for data provided in cable tray below flipper and and with power pole for vertical movement of wires through junction box. E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than (<or= 8mg/100 g oven dry board-perforated method) for better in-house quality. Product warranty shall be for a period of 5 years. Product should be AIOTA and IAQ Gold certified for inhouse air quality. The manufacturer should have ISO9001, ISO14001, ISO45001, ISO50001 from NABCB accredited agency, ZED gold certified and a member of BIFMA. Shade of the table top, powder coating , flipper shall be placed for approval.

Providing and fixing three seater sofa of size 1860mm (L) x 800mm (D) x 700mm (H) and 430mm (seat height)as per the image depicted in the specification comprising a frame constructed from 18 mm and 12 mm thick plywood reinforced with seasoned pine wood supports and enclosed with plywood board for shape and durability. The seat and back support shall consist of 65 mm wide woven elastic webbing made of polyester and rubber latex threads fixed to the frame to provide flexibility and prevent sagging. The arms and back shall be cushioned with 55 mm thick moulded High Resilience (HR) Polyurethane Foam of density 40 ± 5 kg/m³ and hardness load 16 ± 2 kgf at 25% compression conforming to IS 7888, fixed over 12 mm thick bending wood veneer with sponge lining. The seat cushion shall consist of 55 mm thick moulded HR Polyurethane Foam of density 32 ± 5 kg/m³ and hardness load 16 ± 2 kgf at 25% compression conforming to IS 7888, fixed over 12 mm thick bending wood veneer and provided with additional fibre fill and soft PU foam for enhanced comfort. The sofa shall be fully upholstered in approved quality Fabric or Leatherette having 100% polyester composition, GSM of 300–400 and abrasion resistance of minimum 20,000 Martindale cycles for domestic use and 50,000–100,000 Martindale cycles for heavy commercial use. The sofa shall be supported on a continuous end-to-end steel base frame finished with 80–90 micron epoxy polyester powder coating or chromium electroplated finish as approved. All dimensions shall be measured end-to-end at extreme points and permissible variation shall be within ±10 mm. The item shall conform to the approved design/image and shall include all materials, accessories, fittings and hardware complete. The powder coating colour, upholstery shade, laminate colour and pattern shall be submitted for approval of the Engineer-in-Charge and, if not found satisfactory, shall be replaced with approved alternatives as directed. The product shall be AIOTA and IAQ Gold certified for indoor air quality and manufactured by a company holding ISO 9001, ISO 14001, ISO 45001 and ISO 50001 certifications from NABCB-accredited agencies, ZED Gold certification and membership of BIFMA. The complete sofa shall be covered by a comprehensive warranty of 5 years against manufacturing defects, material failure and workmanship deficiencies.

Providing and fixing single seater sofa of size 820mm (L) x 800mm (D) x 700mm (H) and 430mm (seat height)as per the image depicted in the specification comprising a frame constructed from 18 mm and 12 mm thick plywood reinforced with seasoned pine wood supports and enclosed with plywood board for shape and durability. The seat and back support shall consist of 65 mm wide woven elastic webbing made of polyester and rubber latex threads fixed to the frame to provide flexibility and prevent sagging. The arms and back shall be cushioned with 55 mm thick moulded High Resilience (HR) Polyurethane Foam of density 40 ± 5 kg/m³ and hardness load 16 ± 2 kgf at 25% compression conforming to IS 7888, fixed over 12 mm thick bending wood veneer with sponge lining. The seat cushion shall consist of 55 mm thick moulded HR Polyurethane Foam of density 32 ± 5 kg/m³ and hardness load 16 ± 2 kgf at 25% compression conforming to IS 7888, fixed over 12 mm thick bending wood veneer and provided with additional fibre fill and soft PU foam for enhanced comfort. The sofa shall be fully upholstered in approved quality Fabric or Leatherette having 100% polyester composition, GSM of 300–400 and abrasion resistance of minimum 20,000 Martindale cycles for domestic use and 50,000–100,000 Martindale cycles for heavy commercial use. The sofa shall be supported on a continuous end-to-end steel base frame finished with 80–90 micron epoxy polyester powder coating or chromium electroplated finish as approved. All dimensions shall be measured end-to-end at extreme points and permissible variation shall be within ±10 mm. The item shall conform to the approved design/image and shall include all materials, accessories, fittings and hardware complete. The powder coating colour, upholstery shade, laminate colour and pattern shall be submitted for approval of the Engineer-in-Charge and, if not found satisfactory, shall be replaced with approved alternatives as directed. The product shall be AIOTA and IAQ Gold certified for indoor air quality and manufactured by a company holding ISO 9001, ISO 14001, ISO 45001 and ISO 50001 certifications from NABCB-accredited agencies, ZED Gold certification and membership of BIFMA. The complete sofa shall be covered by a comprehensive warranty of 5 years against manufacturing defects, material failure and workmanship deficiencies.

Providing and fixing two seater sofa of size 1460mm (L) x 800mm (D) x 700mm (H) and 430mm (seat height)as per the image depicted in the specification comprising a frame constructed from 18 mm and 12 mm thick plywood reinforced with seasoned pine wood supports and enclosed with plywood board for shape and durability. The seat and back support shall consist of 65 mm wide woven elastic webbing made of polyester and rubber latex threads fixed to the frame to provide flexibility and prevent sagging. The arms and back shall be cushioned with 55 mm thick moulded High Resilience (HR) Polyurethane Foam of density 40 ± 5 kg/m³ and hardness load 16 ± 2 kgf at 25% compression conforming to IS 7888, fixed over 12 mm thick bending wood veneer with sponge lining. The seat cushion shall consist of 55 mm thick moulded HR Polyurethane Foam of density 32 ± 5 kg/m³ and hardness load 16 ± 2 kgf at 25% compression conforming to IS 7888, fixed over 12 mm thick bending wood veneer and provided with additional fibre fill and soft PU foam for enhanced comfort. The sofa shall be fully upholstered in approved quality Fabric or Leatherette having 100% polyester composition, GSM of 300–400 and abrasion resistance of minimum 20,000 Martindale cycles for domestic use and 50,000–100,000 Martindale cycles for heavy commercial use. The sofa shall be supported on a continuous end-to-end steel base frame finished with 80–90 micron epoxy polyester powder coating or chromium electroplated finish as approved. All dimensions shall be measured end-to-end at extreme points and permissible variation shall be within ±10 mm. The item shall conform to the approved design/image and shall include all materials, accessories, fittings and hardware complete. The powder coating colour, upholstery shade, laminate colour and pattern shall be submitted for approval of the Engineer-in-Charge and, if not found satisfactory, shall be replaced with approved alternatives as directed. The product shall be AIOTA and IAQ Gold certified for indoor air quality and manufactured by a company holding ISO 9001, ISO 14001, ISO 45001 and ISO 50001 certifications from NABCB-accredited agencies, ZED Gold certification and membership of BIFMA. The complete sofa shall be covered by a comprehensive warranty of 5 years against manufacturing defects, material failure and workmanship deficiencies.

Providing & Placing corner Table of size 450 mm (W) × 450 mm (D) × 450 mm (H), with table top made of 25 mm thick Prelaminated Particle Board of E1 Grade, finished with matching 2 mm thick PVC edge banding on all exposed edges. The grain pattern of the tabletop shall be continuous and unidirectional. The table shall be supported on a sturdy steel base structure with chrome-finished legs, designed to provide adequate stability, strength and durability. All materials, fittings, accessories and hardware required for complete installation shall be included. The shade and finish of the tabletop and chrome-finished base shall be submitted for approval of the Engineer-in-Charge prior to supply. The product shall be covered by a comprehensive warranty of 5 years against manufacturing defects and workmanship deficiencies. The product shall be AIOTA and IAQ Gold certified for indoor air quality and shall be manufactured by a company holding valid ISO 9001, ISO 14001, ISO 45001 and ISO 50001 certifications from NABCB-accredited agencies, ZED Gold certification and membership of BIFMA. The item shall be supplied complete in all respects and as approved by the Engineer-in-Charge.

Providing & Placing center Table of size 1000 mm (W) × 500 mm (D) × 450 mm (H), with table top made of 25 mm thick Prelaminated Particle Board of E1 Grade, finished with matching 2 mm thick PVC edge banding on all exposed edges. The grain pattern of the tabletop shall be continuous and unidirectional. The table shall be supported on a sturdy steel base structure with chrome-finished legs, designed to provide adequate stability, strength and durability. All materials, fittings, accessories and hardware required for complete installation shall be included. The shade and finish of the tabletop and chrome-finished base shall be submitted for approval of the Engineer-in-Charge prior to supply. The product shall be covered by a comprehensive warranty of 5 years against manufacturing defects and workmanship deficiencies. The product shall be AIOTA and IAQ Gold certified for indoor air quality and shall be manufactured by a company holding valid ISO 9001, ISO 14001, ISO 45001 and ISO 50001 certifications from NABCB-accredited agencies, ZED Gold certification and membership of BIFMA. The item shall be supplied complete in all respects and as approved by the Engineer-in-Charge.