Annual Rate Contract for repair/maintenance of Horizontal Centrifugal pumps Submersible Pumps and Induction/Submersible motors of different capacities with allied works installed at various pumping stations under Jal Shakti PHE Mechanical Division Ra

Amount

Horizontal Centrifugal Pump RKB Make

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (up to 5 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (6 stage to 10 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (Beyond 10 stage)

Providing, Fabrication & fitting of new S.S. pump shaft as per size and specification. (5 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (6 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (7 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (8 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (9 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (10 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (12 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (14 Stage Pump)

Providing and fitting of Brass Impeller as per sample

Providing and fitting of C.I Impeller as per sample

Repairing of brass Impeller

Repairing of C.I Impeller

Fabrication & fitting of neck ring.

Fabrication & fitting of diffuser bush

Fabrication of Stainless steel gland bush

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plate

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of ball thrust bearing-7307

Replacement of ball thrust bearing-7308

Replacement of ball thrust bearing-7309

Providing and fitting of diffuser

Replacement of Roller bearing-N-307

Replacement of Roller bearing-N-308

Replacement of Roller bearing-N-309

Providing & Fitting of Oil seal

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage) at work Shop.

Dismantling & fitting of Pump (6 stage to 10 stage) at work Shop.

Dismantling & fitting of Pump (Beyond 10 stage) at work Shop.

Horizontal Centrifugal Pump Mather & Platt Make

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (up to 5 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (6 stage to 10 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (Beyond 10 stage)

Providing, Fabrication & fitting of new S.S. pump shaft as per size and specification. (5 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (6 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (7 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (8 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (9 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (10 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (12 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (14 Stage Pump)

Providing and fitting of Brass Impellers as per sample

Providing and fitting of C.I Impellers as per sample

Repairing of brass Impellers

Repairing of C.I Impellers

Fabrication & fitting of neck ring.

Fabrication & fitting of spacer bushes.

Fabrication of Stainless steel gland bushes

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing/Fitting of bearing housing along with side cover plates

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of ball thrust bearing-6306

Replacement of Roller bearing-NU-306

Providing & Fitting of Oil seal

Fabrication & fitting of balancing plate

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage) at work Shop.

Dismantling & fitting of Pump (6 stage to 10 stage) at work Shop.

Dismantling & fitting of Pump (Beyond 10 stage) at work Shop.

Horizontal Centrifugal Pump KSB Make

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (up to 5 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (6 stage to 10 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (Beyond 10 stage)

Providing, Fabrication & fitting of new S.S. pump shaft as per size and specification. (5 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (6 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (7 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (8 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (9 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (10 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (12 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (14 Stage Pump)

Providing and fitting of Brass Impellers as per sample

Providing and fitting of C.I Impellers as per sample

Repairing of brass Impellers

Repairing of C.I Impellers

Fabrication & fitting of neck ring.

Fabrication & fitting of body bushes.

Fabrication of Stainless steel gland bushes

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing/Fitting of bearing housing along with side cover plates

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of ball thrust bearing-7309

Replacement of ball thrust bearing-7308

Providing & Fitting of Oil seal

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage) at work Shop.

Dismantling & fitting of Pump (6 stage to 10 stage) at work Shop.

Dismantling & fitting of Pump (Beyond 10 stage) at work Shop.

Fabrication / providing of heavy duty MS coupling pulley set machined to exact size with cotters (100 mm dia)

Fabrication / providing of heavy duty MS coupling pulley set machined to exact size with cotters (125 mm dia)

Fabrication / providing of heavy duty MS coupling pulley set machined to exact size with cotters (150 mm dia)

Fabrication / providing of heavy duty MS coupling pulley set machined to exact size with cotters (175 mm dia)

Fabrication / providing of heavy duty MS coupling pulley set machined to exact size with cotters (200 mm dia)

Horizontal Centrifugal Pump FNC Make

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (up to 5 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (6 stage to 10 stage)

Repairing of pump shaft by remetalling with S.S. welding, turning & polishing to exact size (Beyond 10 stage)

Providing, Fabrication & fitting of new S.S. pump shaft as per size and specification. (5 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (6 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (7 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (8 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (9 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (10 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (12 Stage Pump)

Providing, Fabrication & fitting of new S.S.pump shaft as per size and specification. (14 Stage Pump)

Providing and fitting of Brass Impellers as per sample

Providing and fitting of C.I Impellers as per sample

Repairing of brass Impellers

Repairing of C.I Impellers

Fabrication & fitting of neck ring.

Fabrication & fitting of body bushes.

Fabrication of Stainless steel gland bushes

Fabrication of chuck nut

Providing & Fitting of pump bowl

Repair to bearing housing by sleeve fitting & boring for bearing size

Providing of bearing housing along with side cover plates

Providing and fitting of Delivery Body

Providing and fitting of Suction Body

Replacement of Roller bearing-N-204

Replacement of Roller bearing-N-205

Providing & Fitting of Oil seal

Fabrication & fitting of balancing plate

Providing & Fitting Coupling bolts nuts & rubber bushes.

Dismantling & fitting of Pump (3 stage to 5 stage) at work Shop.

Dismantling & fitting of Pump (6 stage to 10 stage) at work Shop.

Dismantling & fitting of Pump (Beyond 10 stage) at work Shop.

Submersible Pump {V-8}

Repairing of pump shaft by welding, turning, polishing & making of key ways

Fabrication / providing of pump shaft as per exact size & specification

Fabrication / providing of Impeller

Repairs to Impeller

Fabrication / providing of Neck Ring

Fabrication / providing of Body Bush

Fabrication / providing of Guide Bush

Fabrication / providing of Spacer Bush

Fabrication / providing of Cotter

Fabrication / providing of Coupling pulley with cotter for V-8 submersible pump

Fabrication / providing of Pump Body along with studs

Fabrication / providing of intermediate bowl body

Fabrication / providing of Suction Body

Fabrication / providing of NRV with adaptor for V8 pump

Fabrication / providing of flanged adaptor with threading at other end for V8 pump

Dismantling and fitting charges of V-8 submersible pump at work Shop

Submersible Pump {V-6}

Rep+B169:B191airing of pump shaft by welding, turning, polishing & making of key ways

Fabrication / providing of pump shaft as per exact size & specification (up to 5 stage)

Fabrication / providing of S.S. pump shaft as per exact size & specification (6 stage to 10 stage)

Fabrication / providing of pump shaft as per exact size & specification (11 stage to 15 stage)

Fabrication / providing of S.S. pump shaft as per exact size & specification (Beyond 20 stage)

Fabrication / providing of impeller

Providing/Fitting of V-6 plastic impeller

Repairs to Impeller

Fabrication / providing of Neck Ring

Fabrication / providing of Body Bush

Fabrication / providing of Guide Bush

Fabrication / providing of Spacer Bush

Fabrication / providing of Cotter

Fabrication / providing of Pump Body

Fabrication / providing of Suction Body

Fabrication / providing of Coupling pulley with cotter for V-6 Submersible motor

Fabrication / providing of intermediate bowl body

Dismantling and fitting charges of pump (up to 5 stage)

Dismantling and fitting charges of pump (6 stage to 10 stage) at work Shop

Dismantling and fitting charges of pump (11 stage to 15 stage) at work Shop

Dismantling and fitting charges of pump (Beyond 15 stage) at work Shop

Submersible Pump {V-4}

Repairing of pump shaft by welding, turning, polishing & making of key ways

Fabrication / providing of pump shaft as per exact size & specification

Fabrication / providing of impeller

Providing/Fitting of V-4 plastic impeller

Repairs to Impeller

Fabrication / providing of Neck Ring

Fabrication / providing of Body Bush

Fabrication / providing of Guide Bush

Fabrication / providing of Spacer Bush

Fabrication / providing of Cotter

Fabrication / providing of Coupling pulley with cotter

Fabrication / providing of Pump Body

Fabrication / providing of Suction Body

Dismantling and fitting charges of V-4 submersible pump at work Shop.

Miscelleanous

Fabrication & providing of 80 mm dia. flanged adaptor with threading at other side

Fabrication & providinf of 65 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 100 mm dia. flanged adaptor with threading at other side

Fabrication & providing of 50 mm dia. flanged adaptor with threading at other side

Fabrication & providing of MS Clamp 2½"

Fabrication & providing of MS Clamp 3"

Fabrication & providing of MS Clamp 4"

Fabrication & providing of MS Clamp 6"

Fabrication of Shling for holding of 05 Ton capacity Chain block for same load

Providing and Fabrication of GI column pipes of 100 mm dia. 10 feet in length suitable for lowering inside -200 mm dia. casing of B/W by way of turning both the ends of each column pipe on lathe . Providing & welding suitable MS flanges with 04 No. holes on each side of column pipe with proper alignment.

Providing and Fabrication of GI column pipes of 80 mm dia. 10 feet in length suitable for lowering inside -200 mm dia. casing of B/W by way of turning both the ends of each column pipe on lathe . Providing & welding suitable MS flanges with 04 No. holes on each side of column pipe with proper alignment.

Providing and Fabrication of GI column pipes of 65 mm dia. 10 feet in length suitable for lowering inside -200 mm dia. casing of B/W by way of turning both the ends of each column pipe on lathe . Providing & welding suitable MS flanges with 04 No. holes on each side of column pipe with proper alignment.

Providing and Fabrication of Top column pipe of 100 mm dia. 10 feet in length suitable for lowering inside -200 mm dia. casing of B/W by way of turning both the ends of each column pipe on lathe . Providing & welding suitable MS flanges with 04 No. holes on each side of column pipe with proper alignment. The column pipe shall be fabricated by providing one No. MS Flange of size 250 mm dia. in the centre so as to rest the complete connected column pipes with submersible pump motor set on 200 mm casing pipe and 01 No. Bend of requisite size.

Providing and Fabrication of Top column pipe of 80 mm dia. 10 feet in length suitable for lowering inside -200 mm dia. casing of B/W by way of turning both the ends of each column pipe on lathe . Providing & welding suitable MS flanges with 04 No. holes on each side of column pipe with proper alignment. The column pipe shall be fabricated by providing one No. MS Flange of size 250 mm dia. in the centre so as to rest the complete connected column pipes with submersible pump motor set on 200 mm casing pipe and 01 No. Bend of requisite size.

Fabrication of Top column pipe of 65 mm dia. 10 feet in length each (GI pipe to be provided by the department) suitable for lowering inside -200 mm dia. casing of B/W by way of turning both the ends of each column pipe on lathe . Providing & welding suitable MS flanges with 04 No. holes on each side of column pipe with proper alignment. The column pipe shall be fabricated by providing one No. MS Flange of size 250 mm dia. in the centre so as to rest the complete connected column pipes with submersible pump motor set on 200 mm casing pipe and 01 No. Bend of requisite size.

Fabrication of Foundation Bolts 21 No.welded with extended Steel and Chuck Nut

Fabrication of Foundation Bolts 24 No.welded with extended Steel and Chuck Nut

Fabrication of Foundation Bolts 27 No.welded with extended Steel and Chuck Nut

Fabrication of Foundation Bolts 32No.welded with extended Steel and Chuck Nut

Replacement by providing & fitting of bearing-7307 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing-7308 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing-7309 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing-6209 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing-6212 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing-6213 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing NU-204 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing NU-205 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing NU-206 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing NU-208 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing NU-308 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing NU-309 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing N- 6305 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6306-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6307-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6308-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6309-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6310-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6311-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6312-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing 6313-ZZ (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing - 6314 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing - 6315 (SKF/NBC/FAG/Reputed make)

Replacement by providing & fitting of bearing - 6316 (SKF/NBC/FAG/Reputed make)

Providing//Fitting Star Coupling Complete L-150 (Reputed Make)

Providing//Fitting Star Coupling Complete L-190 (Reputed Make)

Providing//Fitting Star Coupling Complete L-225 (Reputed Make)

Providing//Fitting Star Coupling Complete L-226 (Reputed Make)

Providing & fitting of 50 mm dia heavy duty ISI sluice valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 65 mm dia heavy duty ISI sluice valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 80 mm dia heavy duty ISI sluice valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 100 mm dia heavy duty ISI sluice valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 150 mm dia heavy duty ISI sluice valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 50 mm dia heavy duty ISI reflux valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 65 mm dia heavy duty ISI reflux valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 80 mm dia heavy duty ISI reflux valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 100 mm dia heavy duty ISI reflux valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing & fitting of 150 mm dia heavy duty ISI reflux valve C.I. (Kirloskar / Kartar / equivalent ISI make)

Providing of Gland Packing of assorted size 8mm, 10mm, 12mm (Champion/Reputed Make)

Providing of Rubber insertion Sheet (Reputed Make )

Providing of Nut Bolts of assorted size & length (19 no.,21 no.,24 no. 27 no. etc.)

Providing of Puncher Roll (Reputed Make)

Providing of Insulation Tape (Reputed Make)

Repairs to V-4 submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. Repair of thrust pad 01 set. P/F of studs with nuts and T-bolts in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Repairs to V-6 submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. Repair of thrust pad 01 set. P/F of studs with nuts and T-bolts in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Repairs to V-8 submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set.Repair of thrust pad 01 set. P/F of studs with nuts and T-bolts in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Repairs to V-4 submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of studs with nuts and T-bolts in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Repairs to V-6 submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of studs with nuts and T-bolts in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Repairs to V-8 submersible motor rotor shaft by turning, finishing & polishing, Fabrication & fitting of bushes in bush housing-2set.P/F of studs with nuts and T-bolts in place of damaged studs/nuts/bolts as per requirement, Complete assembling of submersible motor & testing in the test pit. Complete job includes cost of material and labour charges.

Repair to submersible Motor (V-6) by extraction of broken copper strips from rotor than P/F of new copper strips (01 No.)& welding of the rotor, turning & finishing. Also repair to rotor end by rebuilding, turning & finishing.

Repair to submersible Motor (V-8) by extraction of broken copper strips from rotor than P/F of new copper strips (01 No.)& welding of the rotor, turning & finishing. Also repair to rotor end by rebuilding, turning & finishing.

Repair to 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair to 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair to 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair to 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair to 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair to 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair to 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair to 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair to 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair to 70 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor.

Repair to 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor.

Repair to 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor.

Repair to 20 HP to 50HP motor by way of replecement of bearing at DE end and assembling of motor.

Repair to 51 HP to 100HP motor by way of replecement of bearing at DE end and assembling of motor.

Repair to 20 HP to 50HP motor by way of replecement of bearing at NDE end and assembling of motor.

Repair to 51 HP to 100HP motor by way of replecement of bearing at NDE end and assembling of motor.

Repair to 20 HP to 50HP motor by way of replecement of bearing at DE and NDE end and assembling of motor.

Repair to 51 HP to 100HP motor by way of replecement of bearing at DE and NDE end and assembling of motor.

Dismantling of damaged HC pump from the base frame by unscrewing nut /bolts, shifting the same out of the pump room with the help of manual labour, Head load carriage upto loading site, loading in the vehicle. Unloading the repaired pump from the vehicle and carriage back to the pumping station, shifting into the pump room, Fitting on the base frame. Coupling with motor, connecting with suction and delivery line. Testing the machinery on full load. (Up to 7 stages) (Carriage on HL up to a lead of 0-500 mtr.)

Dismantling of damaged HC pump from the base frame by unscrewing nut /bolts, shifting the same out of the pump room with the help of manual labour, Head load carriage upto loading site, loading in the vehicle. Unloading the repaired pump from the vehicle and carriage back to the pumping station, shifting into the pump room, Fitting on the base frame. Coupling with motor, connecting with suction and delivery line. Testing the machinery on full load. (Up to 7 stages) (Carriage on HL up to a lead of 0-1000 mtr.)

Dismantling of damaged HC pump from the base frame by unscrewing nut /bolts, shifting the same out of the pump room with the help of manual labour, Head load carriage upto loading site, loading in the vehicle. Unloading the repaired pump from the vehicle and carriage back to the pumping station, shifting into the pump room, Fitting on the base frame. Coupling with motor, connecting with suction and delivery line. Testing the machinery on full load. (7 stage to 14 stage) (Carriage on HL up to a lead of 0-500 mtr.)

Dismantling of damaged HC pump from the base frame by unscrewing nut /bolts, shifting the same out of the pump room with the help of manual labour, Head load carriage upto loading site, loading in the vehicle. Unloading the repaired pump from the vehicle and carriage back to the pumping station, shifting into the pump room, Fitting on the base frame. Coupling with motor, connecting with suction and delivery line. Testing the machinery on full load. (7 stage to 14 stage) (Carriage on HL up to a lead of 0-1000 mtr.)

Disconnecting of power connections from Starter/Panel, extraction of submersible pump set (V-4) from borewell along with column pipes by way of hoisting chain pulley block. Then lowering of repaired submersible pump set along with column pipes, making of power connections to Starter/Panel. Complete job includes cost of skilled/semi- skilled labour.

Disconnecting of power connections from Starter/Panel, extraction of submersible pump set (V-6) from borewell along with column pipes by way of hoisting chain pulley block. Then lowering of repaired submersible pump set along with column pipes, making of power connections to Starter/Panel. Complete job includes cost of skilled/semi- skilled labour.

Disconnecting of power connections from Starter/Panel, extraction of submersible pump set (V-8) from borewell along with column pipes by way of hoisting chain pulley block. Then lowering of repaired submersible pump set along with column pipes, making of power connections to Starter/Panel. Complete job includes cost of skilled/semi- skilled labour.

Disconnecting of power connections from Starter/Panel, extraction of submersible pump set (V-6) from dugwell along with column pipes by way of hoisting chain pulley block. Then lowering of repaired submersible pump set along with column pipes, making of power connections to Starter/Panel. Complete job includes cost of skilled/semi- skilled labour.

Disconnecting of power connections from Starter/Panel, extraction of submersible pump set (V-8) from dugwell along with column pipes by way of hoisting chain pulley block. Then lowering of repaired submersible pump set along with column pipes, making of power connections to Starter/Panel. Complete job includes cost of skilled/semi- skilled labour.

Loading of damaged Submersible Motor (V6) from site of work by way of head load carriage to Mechanical Transport and carriage back to site of work after repairing and unloading at site.

Loading of damaged Submersible Motor (V8) from site of work by way of head load carriage to Mechanical Transport and carriage back to site of work after repairing and unloading at site.

HITECH MECHNICALS

G S ENGINEERING WORKS

BEE AAR ENTERPRISES