Annual maintenance of Kalyanavedika near Sri Kodanda Rama Swamy Temple at Vontimitta, YSR Kadapa District for the year 2026-27

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental, labour charges such as shoring, sheeting,planking, strutting etc., complete for finished item of work including ordinary soil-manual means upto 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick Each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating Each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

Conveyance of excavated earth / debris with a lead of 1 KM including loading, unloading, all incidental and operational charges etc., complete as directed during execution.

Cement Concrete (1:4:8) using 40mm (0.54 Cum), 20mm (0.27 Cum) and 12mm (0.09 Cum) Hard broken granite crushed metal from any source conforming to the relavent ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete

Cement Concrete (1:11/2:3) using 20mm (0.552 Cum) and 12 mm (0.368 Cum) nominal size Hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing cost and conveyance of all materials etc., complete

Random Rubble masonry in CM ( 1:6) using granite stones from any source conforming to the relevant ISI standards including cost and conveyance of all materials, curing, packing, neat finishing etc., complete as per specifications (Excluding cost of bond stones)

Construction of Brick Masonry in CM (1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) from approved kilns (230 x 110 x 70 mm) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls with CM(1:3) using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete

Plastering in Cement mortar (1:5) 20 mm thick using best river sand river including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

- do- in CM (1:5) 20 mm thick

- do- in CM (1:5) 12 mm thick

- do- in CM (1:3) 12 mm thick

Finishing the sides of walls with 1st quality plain colour glazed tiles of size not less than 300X600 mm thick of approved colour and brands including pointing the joints with the same colour of cement by mixing the same colour pigment in white cement and over a bed of C.M.(1:3), 12 mm thick & Cement slurry of 33 Kgs/10Sqm shall be used for fixing bed tiles including cost and conveyance of all materials, curing, incidental charges etc., complete (No separate plastering shall be paid to the walls).

Supply of following materials of approved make and quality, including cost, conveyance, all incidental & operational charges etc., complete as directed during execution.

-do-Country wood scantlings (Vepa / Neredu)

-do-Rabit wire mesh (chicken mesh)

-do-Medium teak wood scantlings: up to 2.00 mts.

-do-Medium teak wood planks: any thickness

-do-Aluminium tower bolt - 10 mm bolt (IS:204) 200mm long

-do-Aluminium tower bolt - 10 mm bolt (IS:204) 300mm long

-do-Brass butt hinges (IS:205) - 100 mm long

-do-Brass butt hinges (IS:205) - 150 mm long

-do-Aluminium butt hinges (IS:205) - 100 mm long

-do-Aluminium butt hinges (IS:205) - 150 mm

-do-Aluminium door handles (IS:208) - 100 mm long

-do-Aluminium door handles (IS:208) - 150 mm long

-do-Brass aldrop (IS:2681) - 300 mm long

-do-Aluminium aldrop (IS:2681) - 300 mm long

-do-Heavy duty Aluminium door stopper

-do-Plain float glass 5 mm thick

Supply of 110 mm dia single socket PVC / SWR pipe - 6 Kgs/Sq.Cm - Prince / Sudhakar or any ISI brand

-do-Supply of 75 mm dia single socket PVC / SWR pipe - 6 Kgs/Sq.Cm - Prince / Sudhakar or any ISI brand

-do-Supply of 160 mm dia double socket PVC / SWR pipe - 6 Kgs/Sq.Cm - Prince / Sudhakar or any ISI brand

-do-Labour charges for laying, fixing and comissioning the PVC pipes including couplers / bends / Tees etc any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees etc. with solvent jointing as per standard practice.

Supply of UPVC specials.

-do-110 mm dia - Single 'T' with door - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-110 mm dia - Single 'Y' with door - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-110 mm dia - Vent cowl - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-110 mm dia - Pipe clip - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-75mm dia - Door bend 87.5 degree - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-75 mm dia - Single 'T' with door - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-75 mm dia - Single 'Y' with door - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-75 mm dia - Vent cowl - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-75 mm dia - Pipe clip - UPVC/SWR pipe fittings (Prince / Sudhakar or any ISI brand)

-do-4" (101.6 mm) Nahany Trap ( without inlet with out Jali)UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand)

Supplying & fixing of 580 mm X 440 mm orissa pan white glazed WC 1st quality ISI marked confirming to IS:2556-part-3-1981 with 'P' or 'S' trap Hindware / Parryware /Neycer - ISI mark : etc., complete including cost, conveyance of all materials, incidental charges as directed during execution.

Supplying & fixing European water closet of 1st quality ISI marked confirming to IS:2556-part-2-1973 of Hindustan / Parryware /Neycer - make white glazed with 'P' trap etc., complete including cost, conveyance of all materials, incidental charges as directed during execution.

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm etc., complete as directed during execution.

Supply & fixing towel rod (CP) of 24" long and 3/4 " dia

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile length: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end of 15 cms etc.,complete as directed during execution.

Painting Two coats for new work over primary (Total three coats) with synthetic polymer plastic emulsion approved make and approved colour including brushes to have an even shade including curing, cost and conveyance of all materials as directed during execution etc., complete.

Painting single coat for old iron work with synthetic enamel paint in all shades -1st quality of approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Polishing single coat for old wood work with best French Spirit polish of two or more coats of approved quality and make including brushes to have an even shade and including linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution etc., complete.

Painting Two coats for new plastered surface over primary coat (Total Three coats) with Acrylic Exterior Emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting single coat for old work with Acrylic Exterior Emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all opertional, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting Single coat for old plastered surface with Ready mixed Synthetic Enamel paint in all shades -Grade-I approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Writing the sign boards / painting Rangolies over M.S.Sheet / C.C. Road etc. with two coats of back ground (one coat primary & one coat synthetic enamel paint) and writing the sign boards with painting two coats with synthetic enamel paint over the back ground. The rate includes cost of paint, labour charges, scaffolding charges etc. required for the work. The paint should be done with first quality synthetic enamel paint of approved colour and make as directed during execution.

Supply of good gravel

Supply of Quarry Rubbish

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of (semi skilled work men) 2nd class mason / welder / painter/ Carpenter/plumber/stone cutter for miscellaneous works connected to annual maintenance of SKRST as directed during execution. (Payment will be made as per actuals)

Supply of unskilled work men for miscellaneous works connected to annual maintenance of Kalyanavedika as directed during execution. (Payment will be made as per actuals)

Hire charges for engaging tractor for conveyance of chain links & other materials etc. including loading unloading, all incidental charges etc,. complete as directed during execution.

Supply of Cotton rope of all dia best quality including cost, conveyance, all incidental charges etc complete as directed during execution:

- do - Coir puri

-do- country nails / wire nails

Supply of machinery in desilting works guide lines for engaging JCB (Capcity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs. 2. The JCB should excavate a minimum of 40 cubic meter of Earth per hour. 3. The JCB should load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per Each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the JCB should be paid hourly basis subject to the condition 2&3 cited above. 6. The JCB should have the Tacho metre and it should function properly.

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2" Ashirvad Flowgurard SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)'-do- 22.20mm OD Pipe - SDR 13.5

Hire charges for core drilling machine including cost and conveyance of drilling bits and other incidental charges etc completed.

Flooring with Non-skid red or white full body Ceramic floor tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete.

Supply and fixing CP Long body bib cock fancy type deluxeheavy duty 12.7mm dia Indian make Seiko/Senior/Nice or equivalent

Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with ISI mark or equivalent approved by the department, with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Senior/Nice or equivalent complete with standard CI brackets including wooden block - 550 x 400 mm - Single C.P. Pillar cock

Painting single coat for old work with ACRYLIC based oil bound washable distemper 1st quality of approved colour, make and quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

Painting TWo coats for old work with synthetic polymer plastic emulsion approved make and approved colour including brushes to have an even shade including curing, cost and conveyance of all materials as directed during execution etc., complete.

HIRE CHARGES for Dewatering pump 5 hp (diesel ) to site of work

Supply of M.S. Tubes & pipes of all diametres as per IS-1161 complete as per design specification and directions.

Supply of Brass polishing cakes of approved quality and make including cost and conveyance of all incidental charges etc,. complete as directed during execution.

Supply of Turpentine Oil

Intallation testing and commissioning of the submersible pupmpset with all accessories as per the standard specification for the above 60m and upto 120m including laying of GI pipe duy of not more than 3m length in the bore well including all incidental charges etc., complete as directed during execution.

Supply and Transportation of 7.50 HP, 12-16 Stage 5 star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha

Supply and Transportation of 1.5 HP (32x25mm). Single phase Mono block CI body motor pumpset confirms to IS 9079:2002 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/Aryen Varsha

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing, polishing, lacquer finishing, to present seamless finishing etc., complete as directed during execution