Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-AOC | ₹5.9 L | L1 | Accepted-AOC L1 lowest |
| 2 | L2₹6.0 LRejected-AOC | ₹6.0 L | L2 | Rejected-AOC L2 lowest |
| Sl No | Description | Qty | Unit | BABYKUTTAN P L2 | FIROSKHAN H L1 |
|---|---|---|---|---|---|
| 1.00Detailed estimate | |||||
| 1.00 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 3,000 | Litre | 13 ₹39,000 | 11 ₹33,000 |
| 1.00 | 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore | 10 | each | 890 ₹8,900 | 888.37 ₹8,883.70 |
| 1.00 | 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | 8 | each | 630 ₹5,040 | 627.46 ₹5,019.68 |
| 1.00 | 17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White | 5 | each | 1,285 ₹6,425 | 1,282.93 ₹6,414.65 |
| 1.00 | 17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | 5 | each | 6,950 ₹34,750 | 6,947.89 ₹34,739.45 |
| 1.01 | 17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid | 4 | each | 740 ₹2,960 | 735.52 ₹2,942.08 |
| 1.01 | 17.28.2.1:Flexible pipe32 mm dia | 8 | each | 132 ₹1,056 | 130.86 ₹1,046.88 |
| 1.01 | OD200285/2025-2026:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | 7 | each | 2,480 ₹17,360 | 2,475.35 ₹17,327.45 |
| 1.01 | 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 8 | no | 132 ₹1,056 | 129.07 ₹1,032.56 |
Updated dates
Tender Value
₹5.9 L
EMD Value
₹14,814
Closing Date
4 Feb 2026, 5:00 pmClosed
Assistant Executive Engineer
Assistant Executive Engineer,PWD Buildings Sub division kollam
GENERAL Non plan 2025 26 All Asset Routine Maintenance works except for Civil Station and Judicial Buildings General Civil Work All assets
2025_PWD_823083_2
ET-31/AEE/KLM/2025-2026
Open Tender
Civil Works - Buildings
365 days
kollam
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,310
Yes
₹14,814
Yes
11 Mar 2026
12 Jan 2026
7 Feb 2026
12 Jan 2026
4 Feb 2026
12 Jan 2026
Detailed estimate
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid
17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid
17.28.2.1:Flexible pipe32 mm dia
OD200285/2025-2026:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm PVC waste pipe, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall
50.18.9.14.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - External work - Exposed on wall
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall
50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow
50.18.9.20.2:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -63 dia 45 degree Elbow
50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend
50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl
50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow
50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow
50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend
50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee
50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl
50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2
OD195055/2025-2026:Engaging Plumber
OD195056/2025-2026:Engaging Man Coolie
OD195057/2025-2026:Engaging Woodcutter along with hired cutting saw machine including fuel charge etc
OD195058/2025-2026:Cleaning fully blocked sewer line using scavenger rod
OD195059/2025-2026:Hire and Running charges of hydraulic excavator
OD195060/2025-2026:Providing and fixing rectangular shower head with arm combo
OD195061/2025-2026:Providing and fixing 100mm steel grating for gully trap
OD195063/2025-2026:Engaging blacksmith
OD195064/2025-2026:Cleaning fully shabby ceramic wall/floor tile using cleaning solution or acid base
OD195065/2025-2026:Supplying and fixing of openable (hinged) aluminium mosquito net (best quality) with Aluminium powder coated frame of size 25.4 mm x 19.05 mm x 1.65 mm, rubber beading, aluminium hinges 25 mm, steel screws, handles etc. including fabrication and fitting charges etc.
2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared
18.54.2:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122 mm long, weighing not less than 99 gms
18.74.2:Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 45 cm length
14.75A:Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
15.18:Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
14.5.1:Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float glass panes of thickness 4 mm (weight not less than 10kg/sqm)
OD198147/2025-2026:Supplying and fixing of PVC hollow laminated bathroom door of good quality single paneled section including cost of all fittings such as butt hinges, tower bolt, handles, conveyance, fitting charges etc.
OD198883/2025-2026:Disposal of Manure of sludge with 50Km lorry conveyance, diesel oil, sucking motor, labour charges etc. complete
OD195066/2025-2026:Engaging scavenger
OD195067/2025-2026:Engaging carpenter
OD198842/2025-2026:Engaging Aluminium Fabricator
OD198935/2025-2026:Hire and running charges of tipper
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1387804.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
bid.pdf
Tender Documents • 1.67 MB
BOQ_1387804.xls
BOQ • 0.33 MB
Formoftender.pdf
Other Document • 0.76 MB
affidavit.pdf
Other Document • 0.26 MB
epayment.pdf
Other Document • 0.07 MB
preliminary.pdf
Additional Documents • 0.35 MB
integritycertifcte.pdf
Additional Documents • 0.14 MB
Download all tender documents and submit your bid