Road Signage work on work of widening and strenthening of Bhamora Shahabad Bilari Road (SH-125) from Ch 46.700 to 72.300 (length 25.600 km) in Rampur district

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60)

Stop Sign Board (90 cm hight Octagonal)

Speed Limit 30 (60 cm circular)

Speed Limit 50 (60 cm circular)

Cautionary Sign- T-Junction/Side Road Right (90 cm equilaterial triangle)

Cautionary Sign- T-Junction/Side Road Left (90 cm equilaterial triangle)

Cautionary Sign- Left Hand Curve (90 cm equilaterial triangle)

Cautionary Sign- Right Hand Curve (90 cm equilaterial triangle)

Cautionary Sign- Right Revers Bend (90 cm equilaterial triangle)

Cautionary Sign- Cross Road (90 cm equilaterial triangle)

Cautionary Sign- T-Intersection Major Road Ahead (90 cm equilaterial triangle)

Pedestrian crossing (90 cm equilaterial triangle)

Cautionary Sign- School Ahead (90 cm equilaterial triangle)

Built up area(90 cm equilaterial triangle)

Rumble strips(90 cm equilaterial triangle)

Keep Left with Object Hazard Marker (30 cm x 90 cm rectangular)

Pass Either Side Marker (30 cm x 90 cm rectangular)

Object Hazard Marker left and right (30 cm x 90 cm rectangular)

Two way Hazard Marker left and right (30 cm x 90 cm rectangular)

Informatory Sign-Flag Type Direction Sign

Informatory Sign-Truck Lay by

Informatory Sign-Filling Station (80x60 rectangular)

Informatory Sign-Hospital (80x60 rectangular)

Single Chevron (50x60cm)

Double Side Chevron (50x60cm)

Cautionary Sign- T-Junction/X-Junction Sign & zebra etc (90 cm equilaterial triangle)

Stop Sign Board (90 cm hight Octagonal)

Speed Limit (60 cm circular)

Direction and Place Identification Signs (0.90 sqm size board)

Route Marker Sign Board (60x45 rectangular)

Providing and laying of hot appiled thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area. Thickeness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminouse Surface. (Repeated/Tranvers bar) Providing and laying of hot appiled thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area. Thickeness of 5 mm is exclusive of surface applied glass beads as per IRC:35 The finished surface to be level uniform and free from streak and holes.

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixed in position including painting & Printing etc.

5th Km Stone

Ordinary Km Stone

Hectometer Stone

Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.

Supply and fixing tree plate size of 150x150 consisting a retro reflective type-XI fixed over 1.50m mm thick aluminium sheet as per direction of Engineer-in-charge.

Cat Eye's Supply & fixing of moulded cats eye shank raised pavement markers made of polycarbonate moulded body and reflected pannel with micro prismatic lens capable of providing total internal reflection of the light entering the lens face conforming to ASTMD for 4280 type 'H' and complying to specification of categories a of MoRTH CIRCULAR NO RW/NH/33023/10-07-DO-III 11-06-1997. The height, width and length shall not exceed 20 mm 150 mm and 105 mm and with minimum relfective area of 13 sqcm. and the each side slope to the base shall be 350. Fixing will be without nails but using with twin polymer shanks bitumen adhesive on bitumen roads as per manufacture's recmmendation including site clearence etc. and complete as per direction by E/I.

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810

White washing and hirmichi washing of culverts and trees upto a distance of 5M from the edge of black top in tree bends of 1' width at a height of 1M from the crown of the road on either side of road including supply of all materials labour and T&P etc. required for proper completion of the work as per SOR Ch. 21 New Item-2

Painting letters upto 8cm size complete with super high grade enamel paint such as shalimar Nerolac and Johnson & Nicolson including supply of all materials labour and T&P etc required for proper completion of work for culvert As per SOR Ch. 21 Item No. 818

Retro-ReflectiveSheeting type-IV with 4 mm thick ACM Double Side: Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side Valuminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MoRTH-2013 specification No-801.3.7 The sheeting shall have a pressure-sensitive adhesive of the aggressive-tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shal be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, Iner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from Intemational/Government Laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D) 4956-00) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of inree years outdoor weathering of the sheeting as per IRC 67 2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals at complete as per direction of the Engineer-in-Charge.

12 m-15 m Span Over Head Structure with 300 dia MS-two vertical post Supply, fixing & eraction of built up Overhead Structure of 12M-15M span comprising of two vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 0.90x0.90x1.50 m of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:3.6 (cement coarse sand and 40 mm gauge stone ballast and RCC M-25 cement concrete including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2012 complete in all respect. The Rates shall include cost of design, fabrication, supply. transportations, Local shifting Erection of Signage structure using crane, inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in charge

Please Enable Macros to View BoQ information