NABARD RIDF XXVII - Additional Infrastructure Facilities to Tanur Fishery Harbour- Construction of low level wharf and low level jetty

Amount

Appendix A-Low level wharf

12.22 : Providing Steel Liner 10mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing.

od5529/2021_2022 : Driving down 750mm dia. M.S liner alrady fabricated to the required depth including all hire charges of machineries,labour charges etc. complete.

od5530/2021_2022 : Bored cast situ M35 grade RCC pile of 750mm dia in basin using batching plant,transit mixer and concrete pump through various strata EXCEPT HARD ROCK excluding reinforcement complete as per drawing and Technical Specification and removal of excavated earth with all lifts and lead up to 1000m including retaining of sides and cleaning the holes, labour charges including shifting plants equipment etc.complete as per drawing, detailed Specification and directions of Engineer-in-charge based on 12.23.6

od5531/2021_2022 : Chipping and removing top of RCC piles to lines and levels carefully without damaging remaining portion of the pile and removing debris upto a distance of 150 m including all labour charges, hire of equipments etc. complete as per the directions of departmental officers at site Unit -cum Taking output -1.25cum

od5532/2021_2022 : Vibrated RCC M35 mix for pile cap using batching plant, transit mixer and concrete pump, including cost of all materials, conveyance, labour charges, watering, curing, formwork etc complete but excluding cost of reinforcement as per drawing and technical specification.based on 13.5.H.P.1

od5533/2021_2022 : Supply, Fitting and Placing in position reinforcement in cages using HCR bar Reinforcement including cost of materials, labour charges, conveyance and placing the cages in bore holes& providing precast cover blocks etc, complete as per Drawing and Technical Specifications and as directed by Engineer in charge excluding cost of welding charges

od6063/2021_2022 : Furnishing and Placing Cast in situ Grade M30 for beams, facia beams and slab panels using Batching Plant, Transit Mixer and Concrete Pump in super-structure as per drawing and Technical Specification including cost of all materials , conveyance, labour charges, formwork, watering, curing, launching of beams and slab panels in positions as per the direction of engineer in charge etc complete but excluding cost of reinforcement (As per observed data no. 9 of TS No. 335/2017 2018 for the work Construction of Wharf by extending existing 40 m Coast Guard Wharf at Vizhinjam Port) Unit = cum , Taking Output 1 cum

12.8.A.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

13.5.G.P.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M30 - Using concrete Mixer - Height upto 5m

od6064/2021_2022 : Furnishing and Placing Reinforced Cement Concrete Grade M30 Using Concrete Mixer in super-structure as per drawing and Technical Specification based on 14.1.C.1

od6066/2021_2022 : Providing and fixing reinforcement using High Corrosion Resistant (HCR) for the RCC<br>works for substructure including conveying, straightening, cutting, bending and tying in position etc.<br>complete as per drawings, detailed specifications and directions of the Engineer-in-charge. based on 13.6

od6067/2021_2022 : Supplying, fitting and placing reinforcement using HCR for the RCC works for super structure including conveying, straightening ,cutting,bending and tying in position etc.complete as per drawing and technical specifications and the direction of engineer in charge Based on 14.2<br>Unit = 1 MT Taking output = 1 MTa) Material

od6068/2021_2022 : Supplying and fixing used lorry tyre as fender for the wharf at specified locations including cost and conveyance ,labour charges etc.complete

Appendix B: Wearing Coat & Bollard and Trussed auction hall

od5525/2021_2022 : Supplying and fixing cast iron bollard having a weight fo 100 Kg or nearest and fixing using departmental bolts.

od6603/2021_2022 : :Supplying and fixing in position 600 mm long, 20 mm dia mild steel foundation bolt with<br>atleast 10cm thread length, nuts, washers etc. for fixing bollards in position including greasing the thread as<br>and when required etc. complete<br>

od5922/2021_2022 : Extra for addition of synthetic polyester triangular fibre of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/ Flooring / water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer -in- Charge based on 4.18

20.6.2.1 : Vertical load testing of piles in accordance with IS 2911( Part IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of engineer -in-Charge.Single pile above 50 tonne and upto 100 tonne capacityInitial test

60.7.6 : Supplying and stacking granite stone 20 to 45 dm3 for dumping works- Supplying at site of work granite stone 20 to 45 dm3 in size (60% 45m3,30%30 to 40dm3 and 10% 20 to 30dm3 stones) for measurement ( deducting not less than 15% for voids as fixed by the departmental officer at site) including all cost, conveyance, loading and unloading charges all other incidental charges all leads and lifts etc. complete as per the direction of the departmental officers at site.

od6069/2021_2022 : DR PACKING Under foundation with Departmentally Supplied - Dry stone packing under foundation with good quality blasted rubble including labour charges etc. complete as per direction of departmental officers at site. OD Based on 60.7.2

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

12.8 : Providing non- asbestos high impact Polypropylene reinforced cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J or L hooks, bolts and nuts, 8 mm dia G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafter and trusses), including cutting sheets to size and shape wherever required.

12.11 : Extra providing and fixing wind ties of 40x6 mm flat iron section.

12.12.1 : Providing and fixing ridges and hips in non-asbestos fibre cement high impact polypropylene reinforced roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.Corrugated serrated adjustable ridges

13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

od6070/2021_2022 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying Epoxy paint over a priming coat of approved steel primer all complete.<br>based on 10.1 primer item 13.50.3 changed with 13.52.1 Epoxy paint with Primer

od5537/2021_2022 : Providing Wearing coat on deck slab by adding extra materials of light quantity of abrasion resistant to confirm IS-1237(like Nito floor hard top) at 3 kg/m2 sprinkled in uniform over the concrete including floating hard and trowelled smooth to get a uniform hard surface and providing wiremesh impression and making necessary grooves for various joints including all cost of material, labour, hire charges etc. complete.(based on Approved data for 150m cargo berth at Beypore)

Appendix C- Low level jetty

65.7 : Hydraulic excavator

od5538/2021_2022 : Providing PVC Posts for tyings fiber boats using 75mm dia. PVC pipes including cost of materials, conveyance, labour charges etc. complete. (based on 60.6)

Concrete work jetty

13.5.A : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications PCC Grade M15 - Height upto 5m

13.5.H.P.1 : Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M35 - Using concrete Mixer - Height upto 5m

13.6 : Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications

M P MUSHTHAK

B&I CONSTRUCTIONS

NASEER PM

Abdul Hameed NK

Bidder Name

Abdul Hameed NK

M P MUSHTHAK

NASEER PM

P.KUNHIKOYA

B&I CONSTRUCTIONS