COMPREHENSIVE REPAIR TO B/R WORK AT DHQ-01 AND CG JETTY UNDER GE (I) CG PORBANDAR

Schedule 'A'

Taking down chowkhat with shutters (without taking of shutters from the frames) of any description not exceeding 1.5 sqm in each panel, Complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat with shutters (without taking of shutters from the frames) of any description exceeding 1.5 sqm but not exceeding 4 sqm in each panel, Complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 2nd class HW plain chowkhats and framed, rebated on the solid rounded or chamfered put together with glue pinned at joints, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 35mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. as specified in SSR Part I, Section 8, clause 8.20 (a), Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing 35mm thick Flush Shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/ frame to match commercial type on both side, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial faces veneers supplied and fixed to chowkhats, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, Complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, Complete all as specified and directed by Engineer-in-Charge.