Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-Finance | ₹3.6 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹3.7 LRejected-Finance | ₹3.7 L | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹4.5 LRejected-Finance | ₹4.5 L | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | Rajinder Kumar Thakur L3 | M/S Sidharth Bore Well L1 | Mohinder Kumar Gupta L2 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of suitable truck/ tractor mounted where only tractor road available, DTH & ODEX /Percussion Calyx / RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in-Charge. | 1 | No. | 6,000 ₹6,000 | 5,000 ₹5,000 | 5,200 ₹5,200 |
| 2.00 | Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate, boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0 mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately per item 6. | 105 | Rmt. | 2,160 ₹2,26,800 | 1,700 ₹1,78,500 | 1,750 ₹1,83,750 |
| 3.00 | Supplying and lowering of IS Marked 125 mm N.B. 5 mm thick fincut MSERW casing pipes as per IS: 4270-2001 and requirement of ODEX attachment from approved manufacturers complete in all respects as per directions of Engineer-in-Charge. | 105 | Rmt. | 1,960 ₹2,05,800 | 1,600 ₹1,68,000 | 1,650 ₹1,73,250 |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directionss of Engineer-in-Charge. | 1 | No. | 6,500 ₹6,500 | 2,000 ₹2,000 | 2,100 ₹2,100 |
| 5.00 | Collection and preservation of soil samples in polythene bags complete in all respects as per directions of Engineer-in-Charge. | 1 | No. | 150 ₹150 | 45 ₹45 | 55 ₹55 |
| 6.00 | Development of borewell and yield testing with air-compressor through V notch and disinfection etc. complete in all respects as per IS:2800-1979 and as per directions of Engineer-in-Charge. | 1 | No. | 6,500 ₹6,500 | 2,000 ₹2,000 | 2,100 ₹2,100 |
Tender Value
₹4.0 L
EMD Value
₹8,100
Closing Date
10 Sept 2025, 5:10 pmClosed
Executive Engineer
EE JSV Mandi
Drilling by DTH/ODEX Per-cussion /Calyx/RC portable ring at village Pibsu
2025_HPIPH_113407_1
6981-7080
Open Tender
Miscellaneous Works
90 days
Pibsu
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹8,100
22 Jun 2026
30 Aug 2025
11 Sept 2025
30 Aug 2025
10 Sept 2025
30 Aug 2025
Amount
Transportation of suitable truck/ tractor mounted where only tractor road available, DTH & ODEX /Percussion Calyx / RC drilling with portable rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per directions of Engineer-in-Charge.
Drilling bores of 152 mm dia. as per IS: 2800-1979 using ODEX (TUBEX) attachement required drilling in collapsible strata conglomerate, boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable stores, bits, water, POL etc. complete with system of simultaneous lowering of 125 mm nominal bore, 5.0 mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25 mm dia. Advani Oerlikon electrodes, with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respects as per directionss of Engineer-in-Charge. MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately per item 6.
Supplying and lowering of IS Marked 125 mm N.B. 5 mm thick fincut MSERW casing pipes as per IS: 4270-2001 and requirement of ODEX attachment from approved manufacturers complete in all respects as per directions of Engineer-in-Charge.
Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directionss of Engineer-in-Charge.
Collection and preservation of soil samples in polythene bags complete in all respects as per directions of Engineer-in-Charge.
Development of borewell and yield testing with air-compressor through V notch and disinfection etc. complete in all respects as per IS:2800-1979 and as per directions of Engineer-in-Charge.
Mohinder Kumar Gupta (BID ID -550494)
Rajinder Kumar Thakur (BID ID -549786)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid