REPAIR TO STEEL FURNITURE AND PAINTING AT MIL STN KOTA

Amount

CHAIR CBA STEEL WITH ARMS, FD-75 (M)

S&F in renewal of seat of chair CBA steel with arms made of 1st class hard wood (Shisham) of size 35mm x 25mm duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts, bolts and washers, complete all as specified, shown on drawing and directed.

S&F in renewal of back of chair CBA steel with arms made of 1st class hard wood (Shisham) of size 35mm x 25mm duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts & bolts and washer, complete all as specified, shown on drawing and directed.

S&F in renewal of arm rest of chair CBA steel with arms made of 1st class hard wood (Shisham) duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer, complete all as specified, shown on drawing and directed.

S&F in renewal of flat iron strips of chair CBA steel with arms made of 20x3mm MS flat section (full length) welded under the seat of chair tubular steel with arms and applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of chair CBA steel with arms with new hard rubber/ PVC shoe superior quality, fixed with steel screws, complete all as specified and as directed.

M & L for preparation of surfaces of steel frame of chair CBA steel with arms and carrying out repairs such as necessary welding wherever required including a coat of red oxide primer on welded surfaces and providing two new caps and applying one coat of synthetic enamel paint olive green/smoke grey (spray painted), complete all as specified, shown on drawing and directed.

CHAIR TUBULAR STEEL WITHOUT ARMS - FD-75 (M)

S&F in renewal of seat of chair CBA steel without arms made of 1st class hard wood (Shisham) of size 35mm x 25mm duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts, bolts and washers, complete all as specified, shown on drawing and directed.

S&F in renewal of back of chair CBA steel without arms made of 1st class hard wood (Shisham) of size 35mm x 25mm duly black painted with two coats of synthetic enamel paint (spray painted) over a coat of primer and canned with plastic cane 2mm wide and fixed with nuts & bolts and washer, complete all as specified, shown on drawing and directed.

S&F in renewal of flat iron strips of chair CBA steel without arms made of 20x3mm MS flat section (full length) welded under the seat of chair tubular steel with arms and applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of chair CBA steel without arms with new hard rubber/ PVC shoe superior quality, fixed with steel screws, complete all as specified and as directed.

M & L for preparation of surfaces of steel frame of chair CBA steel without arms and carrying out repairs such as necessary welding wherever required including a coat of red oxide primer on welded surfaces and providing two new caps and applying one coat of synthetic enamel paint olive green/smoke grey (spray painted), complete all as specified, shown on drawing and directed.

Table Office Officers Steel, FD-84 (M), 1003

S&F in renewal of leg of Table office officers steel made of 25mm square pipe having wall thickness 1.6mm including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of long rail/stiffener of table office officers steel made of 25mm square pipe having wall thickness 1.6mm applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of drawers of Table office officers steel made of 1mm thick MS Sheet duly finished with standard workmanship applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of lock of table office officers steel with new lock (4 lever brass lock) with duplicate keys for drawers/ cupboard, complete all as specified, shown on drawing and directed. Make: Godrej/ Harrison/ Link

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S &F in renewal of top of table office officers steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and balancing white on other side including 4mm thick first class teak wood beading alround, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of table office officers steel with new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of steel frame and drawers of table office officers steel (inside and out side) and applying one coat of synthetic enamel paint olive green/ smoke grey (spray painted), complete all as specified, shown on drawing and directed.

Table Office Clerk Steel FD-84 (M), 1004

S&F in renewal of leg of Table office clerk steel made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of long rail/ center stiffener of table office clerk steel made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of drawers of Table office clerk steel made of 1mm thick MS Sheet duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of lock of Table office clerk steel with new Lock (6 lever brass levers) with duplicate keys for drawers, complete all as specified, shown on drawing and directed. Make: Godrej/ Harrison/ Link

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S &F in renewal of top of Table office clerk steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and balancing white on other side including 4mm thick first class teak wood beading alround duly polished of size 1220mm x 610mm, complete all as specified, shown on drawing and directed.

S &F in renewal of top of Table office clerk steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and balancing white on other side including 4mm thick first class teak wood beading alround duly polished of size 1220mm x 720mm, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of Table office clerk steel with new hard rubber/PVC shoe superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of steel frame and drawers of table office clerk steel (inside and out side) and applying one coat of synthetic enamel paint olive green/ smoke grey (spray painted), complete all as specified, shown on drawing and directed.

Locker Steel FD-257, FD-1029

S &F in renewal of leg of Locker steel made of 1mm thick MS Sheet duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of shutter of Locker steel made of 1mm thick MS Sheet duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of bottom (base) of Locker steel made of 1mm thick MS Sheet duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of hinges of Locker steel with new 75mm long MS thick MS hinges, complete all as specified, shown on drawing and directed.

S &F in renewal of handle of Locker steel with new 100mm long chromium plated handle, complete all as specified, shown on drawing and directed.

S &F in renewal of hasp and staple of Locker steel with new 75 x 40 x 3mm thick MS chromium plated hasp and staple, complete all as specified, shown on drawing and directed.

S &F in renewal of socket of Locker steel with new socket MS chromium plated for fixing of 20 mm dia hanging rod, complete all as specified, shown on drawing and directed.

S &F in renewal of hanging rod of Locker steel with new 20 mm dia 1.6mm thick MS CP conduit pipe, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of locker steel (inside and outside) & including carrying out repairs such as necessary welding/rivetting wherever required and applying one coat of synthetic enamel paint olive green/smoke grey hemotone (spray painted), complete all as specified, shown on drawing and directed.

Teapoy Verandah FD- 255, 383

S &F in renewal of leg of Teapoy verandah made of 20mm dia MS conduit pipe of 1.6mm wall thickness (U Shape) duly welded with existing shape & size including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of long rail of Teapoy verandah made of 25x3 mm MS flat iron duly welded with existing shape & size including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S&F in renewal of top of teapoy verandah made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and other side balancing white including 4mm thick first class teak wood beading alround dully polished, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of Teapoy verandah with new hard rubber/PVC shoe superior quality as specified and as directed.

M & L for preparation of exposed surfaces of steel frame of teapoy verandah and applying one coat of synthetic enamel white paint (spray painted) over a coat of red oxide primer wherever required, complete all as specified, shown on drawing and directed.

Table Dining ORs FD- 165 M

S&F in renewal of leg of table dining ORs made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of long rail / long stiffener of Table dining ORs made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of short rail / short stiffener of Table dining ORs made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of Table dining ORs with new hard rubber/PVC shoe superior quality as specified and as directed.

S&F in renewal of top of the Table dining ORs made out of 17/18 mm thick Pre-Fabricated Particle board with & including 22 gauge aluminium sheet of top complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of table dining ORs and applying one coat of synthetic enamel Black/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Table Dining 900mm x 900mm x 760mm Steel FD- 165 M, 1009

S&F in renewal of leg of Table dining 900 x 900 x 760 mm steel made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of rail of Table 900 x 900 x 760 mm steel made of 25mm square pipe having wall thickness 1.6mm & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

S &F in renewal of top of Table dining 900 mm x 900 mm x 760 mm steel made of 17/18 mm thick exterior grade prelaminated particle board one side teak face and other side balancing white including 4mm thick first class teak wood beading alround duly polished, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of Table 900 x 900 x 760 mm steel with new hard rubber/PVC shoe superior quality, complete all as specified and as directed.

M & L for preparation of exposed surfaces of steel frame of Table 900 x 900 x 760 mm steel and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Chair Verandah FD- 256, 359

Removal of unserviceable cane from Chair Verandah, scraping existing paint from frame and carrying out repairs such as necessary welding wherever required and M & L for painting with two coats of synthetic enamel white paint over a coat of primer wherever required and M & L for recanning with white or cream ivory plastic cane 4mm wide including replacing of hard rubber/PVC shoe, complete all as specified, shown on drawing and directed.

S&F in renewal of leg of chair verandah made of 20/25 mm dia MS conduit pipe of 1.60 mm wall thickness (U shape) duly welded with existing shape and size & including applying a coat of synthetic enamel paint (spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawings and directed.

Almirah Large steel with Shelves FD- 104 M, 1031

S &F in renewal of leg of almirah large steel made of 1mm thick MS Sheet with appropriate welding/ rivetting duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of bottom (base) of Almirah Large steel made of 1mm thick MS Sheet with appropriate welding/riveting duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of shelves of Almirah Large steel made of 1mm thick MS Sheet with appropriate welding / rivetting duly finished & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of handle of Almirah Large steel with new chromium plated handle (Superior Quality) of existing size, shape, complete all as specified, shown on drg and directed.

S &F in renewal of lock of Almirah Large steel with new Lock (6 brass levers) with duplicate keys for drawers, rest all as shown on drg and as directed. Make: Godrej/ Harrison/ Link

S &F in renewal of locking assembly of Almirah Large steel with new locking assembly with cover & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

M & L for preparation of all exposed surfaces of almirah large steel with shelves (inside and outside) including carrying out repairs such as necessary welding/riveting and applying filler (putty) wherever required and applying one coat of synthetic enamel paint olive green/smoke grey/hemotone (spray painted), complete all as specified and directed.

Almirah Medium steel with Shelves FD- 67 M, 1032

S &F in renewal of leg of Almirah medium steel made of 1mm thick MS Sheet with appropriate welding/riveting duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of botom (base) of Almirah medium steel made of 1mm thick MS Sheet with appropriate welding/riveting duly finished with standard workmanship & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of shelves of Almirah medium steel made of 1mm thick MS Sheet with appropriate welding/ rivetting duly finished & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S &F in renewal of handle of Almirah medium steel with new chromium plated handle (Superior Quality) of existing size, shape complete all all as shown on drg and as directed.

S &F in renewal of locking assembly of Almirah Large steel with new locking assembly with cover & including applying a coat of synthetic enamel paint (Spray painted) over a coat of red oxide primer after preparation of surfaces, complete all as specified, shown on drg and directed.

S &F in renewal of lock of almirah medium steel with new Lock (6 brass levers) with duplicate keys for drawers, rest all as shown on drg and as directed by Engr-in-Charge. Make :- Godrej/ Harrison/ Link

M & L for preparation of all exposed surfaces of almirah medium steel with shelves (inside and outside) including carrying out repairs such as necessary welding/riveting and applying filler (putty) wherever required and applying one coat of synthetic enamel paint olive green/smoke grey/hemotone (spray painted), complete all as specified and directed.

Table Computer, FD/E6/MAP/03

S&F in renewal of top of Table computer made of 17/18 mm thick exterior grade prelaminated particle board exterior grade one side teak face and other side balancing white including 2 mm thick PVC beading alround the top duly polished, complete all as specified, shown on drawing and directed.

S&F in renewal of key board tray of Table computer made of 17/18 mm thick exterior grade prelaminated particle board exterior grade one side teak face and other side balancing white including 2 mm thick PVC beading alround duly polished, complete all as specified, shown on drawing and directed.

S&F in renewal of sliding/telescopic channel of table computer with new sliding channel of approved quality (replace in pair), complete all as specified, shown on drawing and directed.

Supply and fixing in renewal of knob/handle of table computer with new knob of 30 to 40mm dia aluminum anodised and fixed with machine screws, complete all as specified, shown on drawing and directed.

S&F in renewal of leg of Table computer made of 25x50mm rectangular MS pipe having wall thickness 18 gauge including PVC cover and applying a coat of synthetic enamel paint (spray painted) over coat of primer after preparation of surfaces, complete all as specified, shown on drawing and directed.

S&F in renewal of shoe of Table computer with new hard rubber/PVC shoe (leg with nylon Buffer) of superior quality, complete all as specified and directed.

TABLE BED SIDE (MAP), FD/E6/MAP/15(R)

S&F in renewal of broken handle from table bed side (MAP), with new handle of superior quality in D shape and fixed in existing position, complete all as shown on drg and as directed.

S&F in renewal of top of table bed side (MAP) made of 17/18 mm thick prelaminated melamine face particle board mailamine/ teak face, exterior grade both side teak face laminated & including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

S&F in renewal of front side of small drawer of table bed side (MAP) made of 17/18 mm thick prelaminated particle board, exterior grade, one side mailamine/ teak face lamination and other side balancing white, including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

S&F in renewal of front side of large drawer of table bed side (MAP) made of 17/18 mm thick prelaminated particle board, exterior grade, one side mailamine/teak face lamination and other side balancing white, including alround 2 mm thick PVC beading, complete all as specified, shown on drawing and as directed.

S&F in renewal of back side ply from table bed side (MAP) made of 6mm thick BWR ply & fixed in back side of table, complete all as specified, shown on drawing and as directed.

S&F in renewal of sliding / telescopic channel of table bed side (MAP) with new sliding channel approved quality (renewal in pair) complete all as specified, shown on drawing and as directed.

S&F in renewal of PVC beading of table bed side (MAP) superior quality, complete all as specified, shown on drawing and as directed.

Dual Desk (for class I to V) (CWE/ KOTA/ 1R/ 2013)

S&F in renewal of Top of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of shelf of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of front side of dual desk made out of 18 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of seat of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of back rest of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

M&L for electric spot welding of broken joints of 25mm square pipe, 1.6mm thick with 02 Nos of seat support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

M&L for electric spot welding of broken joints of 25mm square pipe, 1.6mm thick with 02 Nos of back support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of shoe of Dual Desk with new hard rubber/PVC shoe of superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Dual Desk (for class VI to VIII) (CWE/ KOTA/ 2R/ 2013)

S&F in renewal of Top of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of shelf of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of front side of dual desk made out of 18 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of seat of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of back rest of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

M&L for electric spot welding of broken joints of 25mm square pipe with 02 Nos of seat support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

M&L for electric spot welding of broken joints of 25mm square pipe with 02 Nos of back support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of shoe of Dual Desk with new hard rubber/PVC shoe of superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Dual Desk (for class IX to XII) (CWE/ KOTA/ 3R/ 2013)

S&F in renewal of Top of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of shelf of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of front side of dual desk made out of 18 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of seat of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

S&F in renewal of back rest of dual desk made out of 25 mm thick prelaminated particle board both side laminated melamine face exterior grade & including 6mm thick half round TW edging alround dully french polished fixed with steel screw in proper size and shape complete all as specified, shown on drawing and directed.

M&L for electric spot welding of broken joints of 25mm square pipe, 1.6mm thick with 02 Nos of seat support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

M&L for electric spot welding of broken joints of 25mm square pipe, 1.6mm thick with 02 Nos of back support of dual desk including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of shoe of Dual Desk with new hard rubber/PVC shoe of superior quality, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of dual desk and applying one coat of synthetic enamel smoke grey/OG paint (spray painted), complete all as specified, shown on drawing and directed.

Form without back , Drg No.FD- 77 (M), 97 (M), 1027

M&L for electric spot welding of broken joints of 25mm square pipe including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of legs of form without back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame, rest all as shown and specified on drg.

S&F in renewal of shoe of form without back with new Hard PVC shoe of superior quality as specified and shown on drg.

Removing of old unserviceable seat plank of form without back and supply & fixing new wrought finish seat plank of size 1900x255x25 mm made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with screws and washers and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings

M&L for preparation of old painted surface of frame of form without back and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Form with back , Drg No.FD- 78 (M)

M&L for electric spot welding of broken joints of 25mm square pipe including removing excess welding material and preparation of surface and applying a coat of red oxide primer and over it applying a coat of synthetic enamel paint, rest all as shown on drg and as directed.

S&F in renewal of legs of form with back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame, rest all as shown and specified on drg.

S&F in renewal of back rest frame of form with back made of 25mm square pipe 1.6mm thick in proper size, duly welded to main frame, rest all as shown and specified on drg.

S&F in renewal of shoe of form with back with new Hard PVC shoe of superior quality as specified and shown on drg.

Removing of old unserviceable seat plank of form with back and supply & fixing new wrought finish seat plank of size 1800x255x25 mm made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with screws and washers and applying french polishing on all exposed wooden surfaces including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings

All as per item 18.05 (here-in-before) but back plank of size 1800x150x20 mm, complete all as specified and directed.

M&L for preparation of old painted surface of frame of form with back and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Chair Revolving with arms/ Chair computer , Drg No.TP & FD/E6/MAP/01

Supply and fixing in renewal of seat of chair revolving made of 100mm thick foam cushion 40 Kg/Cum density, covered with new approved quality tapestory cloth, complete all as specified and directed.

Supply and fixing in renewal of of back of chair revolving made of 100mm thick foam cushioned 40 Kg/Cum density, covered with new approved quality tapestory cloth, complete all as specified and directed.

Supply and fixing in renewal of best quality hydraulic system of chair revolving as per the sample kept in BSO office, complete all as specified and directed.

Supply and fixing in renewal of arm rest of chair revolving as per the sample kept in BSO office, complete all as specified and directed.

Supply and fixing in renewal of pedestal (bottom) of chair revolving consisting of five legs with twin wheel coastors as per the sample kept in BSO office, complete all as specified and directed.

Table 900 x 600 x 760mm with or without drawer steel, Drg No.FD-1008,1007

S&F in renewal of legs of table 900 x 600 x 760mm steel with or without drawer, made of 25mm square pipe 1.6mm thick, in proper size, rest all as shown and specified on drg.

S&F in renewal of long rail /centre stiffener of table 900 x 600 x 760mm steel with or without drawer, made of 25mm square pipe 1.6mm thick, in proper size, rest all as shown and specified on drg.

S&F in renewal of drawer of Table 900 x 600 x 760mm steel with drawer made of 1mm thick MS sheet in size and shape as shown on drawings, complete all as specified and directed.

S&F in renewal of lock of Table 900 x 600 x 760mm steel with drawer, with duplicate keys, four lever, made of brass, shape as shown and specified on drg.

S&F in renewal of Handle of Table 900 x 600 x 760mm with drawer made of PVC, of size and shape as shown and specified on drg.

S&F in renewal of superior quality hard PVC shoe of Table 900 x 600 x 760mm steel with/without drawer, complete all as specified and shown on drg.

S&F in renewal of Top of Table 900 x 600 x 760mm with or without drawer steel made out of 17/18 mm thick Prelaminated particle board exterior grade, ISI marked, one side teak finish and other side balancing white duly fixed with 4 mm thick first class hard wood (teak wood) beading allround the top, fixed with steel screw, all as shown and specified on drg.

M&L for preparation of old painted surface of frame of Table 900 x 600 x 760mm with or without drawer steel and applying one coat of 1st quality synthetic enamel paint, complete all as specified and directed.

Stool adjustable (Rev) FD-119, 1025

S&F in renewal of cushion with rexine of stool adjustable made of 50mm thick 40 density cushion covered with rexine in best quality in proper size, rest all as shown and specified on drawing.

M&L for preparation of old painted surface of stool adjustable steel and applying one coat of 1st quality synthetic enamel OG/smoke grey paint over coat of red oxide primer wherever required complete all as specified, shown on drawing and directed.

DESK STAND LECTURE, FD-1022

S&F in renewal of front side of desk stand lecture made to size with 17/18 mm thick prelaminated particle board, exterior grade, one side natural teak face and other side balancing white including providing 4 mm thick half round teak wood beading on exposed edges, complete all as specified and directed.

All as per item 22.01 (here-in-before) but renewal of top of desk stand lecture, complete all as specified, shown on drawing and as directed.

All as per item 22.01 (here-in-before) but renewal of side (left or right) of desk stand lecture, complete all as specified, shown on drawing and as directed.

All as per item 22.01 (here-in-before) but renewal of upper shelf of desk stand lecture, complete all as specified, shown on drawing and as directed.

All as per item 22.01 (here-in-before) but renewal of lower shelf of desk stand lecture, complete all as specified, shown on drawing and as directed.

Chair Writing (MAP), Drg No.- FD/E6/MAP/12

S&F in renewal of seat of chair writing (MAP) made of 50mm thick PU foam 40 density covered with as approved fabric and PVC lipping all round in proper size & shape complete all as specified, shown on drawing and as directed.

S&F in renewal of back of chair writing (MAP) made of 50mm thick PU foam 40 density covered with as approved fabric and PVC lipping all round in proper size & shape complete all as specified, shown on drawing and as directed.

S&F in renewal of seat ply of chair writing (MAP) made of 12mm thick hot press plywood in proper size & shape complete all as specified, shown on drawing and as directed.

S&F in renewal of arm rest of chair writing (MAP) with new armrest in one piece made of black integral skin polyurethane in proper size & shape complete all as specified, shown on drawing and as directed.

S&F in renewal of rubber stopper of chair writing (MAP) with new hard rubber stopper superior quality, fixed with steel screws, complete all as specified and as directed.

M & L for spot welding of broken joints 25mm to 75mm long and metal thickness not exceeding 3mm and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded surface, complete all as specified, shown on drawing and directed.

M & L for preparation of exposed surfaces of steel frame of chair and applying one coat of synthetic enamel black paint (spray painted) over coat of red oxide primer wherever required complete all as specified, shown on drawing and directed.

Bed Hard Top Drg No.FD/E6/MAP/08(R )

S & F in renewal of prelaminated board of head board and foot board of Bed Hard with new 18mm thick prelaminated MDF board exerior grade both side laminated teak face shade & including 1 mm thick PVC edging alround, complete all as shown on drg and as directed.

Supply and fixing in renewal of plywood top of Bed Hard with 12mm thick plywood BWR Grade, 7 ply approved quality in single piece as per drawing without any joint, fixing to the bed frame with suitable screws wood/steel, complete all as specified on drawing and as directed.

M&L for electric welding to broken old frame of bed hard top including preparation of surface and removing the unwanted welding spot, complete all as specified and directed.

M&L for preparation of old painted surface of frame of bed hard top and applying one coat of 1st quality synthetic enamel black paint, complete all as specified and directed.

M&L preparation of old previously painted exposed (Inside and outside) steel surfaces by cleaning and derusting wherever required & including removing of dent if any and applying filler (putty) wherever required and applying one coat of synthetic enamel paint (Ist quality) of approved tint with spray gun, complete all as specified and directed for the following furniture articles: -

Almirah steel large with shelves FD-67(M) & FD-1031

Almirah steel medium/small with shelves FD-67(M) & FD-243

Book Kit Steel FD- 98(M)

Book shelves open Large steel FD- 69 (M)

Book shelves open Small steel FD- 69 (M)

Bed Hard Top FD/E6/MAP/08 (R )

Chair CB steel with arms FD-75 (M)

Chair CB Steel without arms FD-75 (M)

Chair Verandah FD- 19, 359 & 256

Form with or without Back FD- 97(M)

FMN Set for Charpoy GI Pipe FD - 220

Locker Steel FD- 257, 1029

Rack open large steel of size 1830x760x1905mm FD-129 (M)

Rack Steel 6 tier FD- 129 (M), FD-1038

Rack side steel with tray FD- 1023

Stool steel 24" height FD-81 (M)

Stool steel 305 x 305 x 510mm FD-81 (M)

Shoe Rack Steel FD/E6/MAP/02 (R)

Table Office Officer steel FD-84 (M), FD-1003

Table Office clerk steel FD-84 (M) & FD-1004

Teapoy verandah FD-255 & FD-383

Table dining 900 x 600 x 760 mm steel with or without drawer FD-1007 & 1008

Table dining 900 x 900 x 760 mm steel FD-1009

Table dining OR's FD-165 (M)

Table Bed Side Steel FD- 133

Trestle Store Room Iron FD - 86 & 1043

M/S CHANDER SHEKHAR

SNEH CORPORATION

SK INDUSTRIES

PRAFUL ENTERPRISES

B.S Constructions

L.BHIMSEN

Budget Furniture Industries