janpad Banda me Bagiya Piprahri marg Rajkiy Mahavidhyalay tak samprk marg se Rajaram food Prosesing Prant ki oor CC road Nirman.

E/W in embankment in B.C. soil lead up to 30m And lift up to 1.5m including all complete. With earth transported up to 2 km distance

Providing laying and spreading of specified graded stone dust in drainage layer (Blanket coat) in uniform layer on a prepared sub grade and compacting with 8 - 10 T power roller As per MORD Technical Specification Clause 402.

Construction of granular sub base by Providing well materials, and spreading in uniform layer with moter grader on prepared sub grade surface mixing by manually mix in place mathod with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density including all material, labours T&p etc with all complete as MORD specification cluse 401 ( table 400.1)

Laying of C.C in 1:1½:3 with cement , coarse sand, 20 mm gauge stone grit for CC road pavement slab or drain floor I/c finishing and micro texturing on road surface by transverse tinning with broom I/C all complete as per directed by Engineer in charge.

Providing & Laying of polythene sheet 125 micron thick before laying the C.C. road slab for making separation I/c all complete as per directed by Engineer in charge.

Making expansion / construction joint and transverse or longitudinal contraction joint I/c all complete as per directed by Engineer in charge.

Construction of embankment in Shoulder with approved material obtained from borrow pits with a lift up to 1.5 meter transporting to sites spreading grading to require slope and compaction to meet requirement of table 300.1 & 300.2 with a lead up to 50 meter as per MORD technical specification cause 301.5 MORD specification 301.5(I) S.No. 3.4

Providing & Fixing of citizen information board and photography of site I/c all complete as per directed by Engineer in charge.

Construction of (1 No) 2x1000 mm dia NP-3 Hume pipe culvert & Construction of (1 No) 1x600 mm dia NP-3 Hume pipe culvert Earth work in embankment for foundation of structures upto 3 m depth as per drawing and technical specification clause301 1 including setting out construction of shouring and bracing removl of stumps and other delerious materials and its disposal upto alead of 50 mt dressing of sides and bottom and backfilling in trenches with excavated suitable materials per mord specification i/c all labour, T&P etc.

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km from the side of work and including watering dressing etc including cost of all materials labour and T&P etc.

Cement concrete with 4 cm approved stone ballast approved coarse sand cement in the proportion 1:4:8 c/s including supply of all materials labour and T&P etc.require proper completion work

Class-150 Brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortor in foundation and plinth including supply of all materials labour T&P etc. required for proper completion of work

providing and laying 600 mm dia reinforced concrete pipe NP3 in single row for culvert on Type A(concrete cradle) bedding with M15 grade cement concrete including fixing coller with cement concrete mortor 1:2 but excuding excavation protection work back filling concrete and masonry works in head walls and parapet clause 1106 as per data book item no 9.3(B)

providing and laying 1000 mm dia reinforced concrete pipe NP3 in single row for culvert on Type A(concrete cradle) bedding with M15 grade cement concrete including fixing coller with cement concrete mortor 1:2 but excuding excavation protection work back filling concrete and masonry works in head walls and parapet clause 1106 as per data book item no 9.3(B)

12 mm thick plaster on brick work not less than 10 mm with cement mortor in proportion 1:4 including all materiles labour T&P etc. required completion of work

Cement concrete with 2 cm approved stone ballast approved coarse sand cement in the proportion 1:2:4 c/s including supply of all materials labour and T&P etc.require proper completion work