EE-IED/UDP/66/2025-26

Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:-

Short Point :-

Medium Point :-

Long Point :-

Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

roviding and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:-

2 x 1.5 sq.mm:-

2 x 2.5 sq.mm:-

2 x 4 sq.mm:-

2 x 6 sq.mm:-

1 x 1.5 sq.mm:-

1 x 2.5 sq.mm:-

2 x 1.5 sq.mm:-

2 x 2.5 sq.mm:-

2 x 4 sq.mm:-

2 x 6 sq.mm:-

Supplying and fixing of the following electrical accessories including necessary connection etc. as required.

5 step fan regulator (2M):-

Blank plate (1M):-

20/25 amps single phase motor starter switch(2M):-

Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12"x 12" having locking arrangement including CC work, holes on earth pipe etc. as required:-

Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required.

Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for loop earthing as required.

Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W).

Supplying & installation of 400mm sweep AC wall mounting fan with plastic blade including connection etc as required:-

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):-

Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):-

Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:-

18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):-

9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying and fixing of the following ratings switch disconnector fuse unit(main switch) made of sheet steel enclosure with all accessories including drilling holes on the board/MS clamp and necessary connection etc. as required

32 amps 240 volts DP main switch (rewireable):-

Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:-

32 amps kitkat porcelain fuse unit with base(rewireable):-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/ 415 volts MCB/ Isolator/ RCCB (SP/ SPN/ DP/TP /TPN /FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required.

(2+4) / 6 way SPN MCB DB (Double door):-

(2+10) / 12 way SPN MCB DB (Double door):-

Supplying and fixing of following ratings MCB B/C curve having breaking capacity 10 KA in the existing MCB, DB including connection as reqd.

6 to 32 amps SP MCB:-

Supplying and installation of isolators of following ratings in the existing MCB, DB including connection as reqd.

40 amps DP isolator:-

Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:-

Supplying & fixing of 40mmx6mm MS clamp for installation of ceiling fan/luminaries on cross bar including necessary accessories etc as required:-

Supplying of 25 cm long 'L' hook made with 40mmx6mm MS flat and fixing with necessary fasten nuts including finishing,painting etc as required.

Please Enable Macros to View BoQ information