SPECIAL REPAIR OF BLDG NO P-72 OTM ACCN INCL ROOF TREATMENT AT OFFRS MESS OF 121 ENGR REGT AT BINNAGURI UNDER GE (S) BINNAGURI

Amount

Taking down chowkats or frames exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) and removal from site.

All as item No 1 here-in before but n.exc 1.5 Sqm each.

Dismantling floor hearth or wall tiling including cement mortar bedding (incl backing) removing serviceable tiles to store and rubbish off the premises.

Taking down cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.

Dismantling wrought iron or mild steel work of any description not otherwise provided for grils.rails etc

Demolition of brick work built in cement mortar including quions, arches, pillars etc but excluding ashlar facing and dressed stone work including removal of rubbish off the site complete all as directed

Demoletion of cement concrete (unreinforced) of any description in any position not otherwise specifically provided for and removal of rubbish off the site complete all as specified.

Taking town of steel windows/ventilators of any size and description and removal from site complete all as specified.

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 500m and n. exc. 900m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified.

Demolition of reinforced cement cocrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise provided for etc. removal of rubbish off the site of work complete all as specified.

M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified.

M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified.

M&L for 25 mm thick PCC (1:2:4) type B1 ( 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified.

M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, Copping, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified.

M & L PCC (1:2:4) type B1 (20mm graded aggregate) as in roof kerbs, slightly rounded or chamfered on edges, mixed with water proofing compound 200 ml per beg of cement or as per manufacturer instructions finished even and smooth on exposed concrete surface without using extra cement all complete as specified and as directed. (Note: Water proofing compound shall be measured and paid perarately under relevant item of schedule 'A') complete all as specified.

M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20 mm graded stone aggregate) for chujjas complete all as specified.

Dismantling water tanks and removing to store of capacity exc 250 & n.exc 500 ltrs complete all as specified.

Material and labour for hoisting and fixing rotational moulded polyethylene(double layer) water storage tanks 500 lit capacity (Cylinderical vertical) ISI marked(IS-12701:1996) hoisted and fixed in position including inlet, oulet and over flow connection etc complete all as specified.

S&F 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified.

M&L for plain, framed, factory made panelled shutters 35 mm thick (any number of panels) , with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified.

S&F second class hardwood, factory made glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I Section8, Clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification complete all as specified.

S&F of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces complete all as specified.

S&F of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows complete all as specified.

S&F in repairs of factory made steel ventilator with top hung shutter including friction/ box type hinges ,steel peg stay complete including taking out old/unserviceable steel ventilator and making good to match as per existing surfaces etc complete all as specified.

S&Fof 3mm thick sheet glass panes ordinary quality n.exc 0.5sqm each fixed to steel frame complete with oil putty in square including steel pin complete all as specified.

All as per item No.32 here-in- above but 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete all as specified.

S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & fair complete all as specified.

Material and labour rendering 20mm thick cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces in two layer 10mm each layer and top layer mixed with integral water proofing compound all as per manufacturer's instruction and as specified. Make: 'Plastocrete Plus' of Sika/ 'Pidiproof LW' of Pidilite for water proofing compound. Note: (i) WPC shall be measured and paid for separately as 'Supply only'. (ii) WPC to be mixed @200ml per 50 Kg bag of cement all as manufacturers instruction.

Supply only liquid water proofing compound (WPC) of complete all as specified.

M&L for 5mm thick in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified.

M & L for two coat of acrylic distember on new wall surface including preperation of the surface over wall care putty 1.00mm thick (average thickness) all as specified.

-----Blank-----

M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of new /old wall surfaces complete all as specified.

M&L applying two coats of weather proof exterior emulsion paint of standard quality and make ,over a coat of white primer including preparation of old wall surfaces complete all as specified.

M&L for two coats of synthetic enamel painting to new wooden surfaces over a coat of pink primer including preparation of surfaces area exc 10cm width & girth complete all as specified.

Material & labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth complete all as specified.

Material and labour for applying one coat of synthetic enamel paint on old painted steel and iron surfaces of any description over 10 cm in width or girth including necessary preparation of surfaces complete all as specified.

Complete removal of existing treatment from plastered or unplastered surfaces of walls including cleaning with scrapers, any number of coats and any width or girth etc and applying two coats of oil bound distemper over a coat of primer over super fine Birla or altek putty finish as required and complete all as specified.

Material and labour for preparation of old plastered ceiling surfaces by brooming down or steel wire brushing: scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for applying three coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified.

M& L for form work to chajjas and similar items including edges ,rough finished surfaces of concrete flat complete all as specified.

M&L for mild steel TMT bars,10mm dia and over cut to length, bent to shape required including cranking ,bending spirally, hooping for columns, hookings/ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip complete all as specified.

M&L for MS flat iron bent to shape, holes drilled etc complete as in hold fast & wind ties etc including one coat of red oxide paint complete all as specified.

-----Blank-----

M&L for water proofing treatment to RCC roof slab as specified below and all as specified:- (a) 10mm th cement plaster in CM 1:3 with integral WPC to be laid over the RCC roof slab when the concrete is green. (WPC shall be measured and paid separately as "Supply only". (b) 4mm thick plain texture and weighing not less than 4.00 kg/sqm atactic Polypropylene Polymer (APP) modified bitumen based prefabricated five layer water proofing membrane reainforced with non woven polyster matt black finished over water bases primer at 0.4 Ltr / Sqm of density at 25 degree centigrade 0.87 - 0.89 kg/ltr and viscosity 70-160 cps or cold sticker and torch application of membrane with overlap while torchin g shall be 150mm on length side and 10 mm on width side. after necessary preparation of surface complete as per manufacturers instruction. M/s fosroc chemicals "Proofex Torchseal 3PI/4PI/Antiroof Plain" or M/s STP Limited "Super Themolary APP PL/MT/Superior Shaliplus/industrual bitumen, ShaliTex Primer" or M/s Sika India Pvt Ltd "Sika WP Shield 103P/PM/ Sika WP Shield 104P/PM) or equivalent as approved by GE. (d) Apply two coats of bitumastic - Aluminium paint over the membrane.

M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in floors as levelling course for roof treatment.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks,or galvanised wire staples.or wooden beadings for doors complete all as specified.

Taking up or down 15mm steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed of following bore:-

As per Item No 60 above but for Bore tubing 20mm

M & L for 15mm steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following.

As per Item No 62 above but for Bore tubing 20mm

S&F in repairs of PVC low level flushing cistern, 10 ltr capacity, syphonic action type white body with inlet ball valve, float , handle, bracket, long flush pipe of PVC to suit flushing cistern ( long bend) etc complete & connecting to WC (Make : Sleek of Hindware, Slimline of Parryware or equivalent of Cera)

S&F Water Closet (squatt pattern) of vitruous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cirstern and flush pipe) including connection to trap and flushing pipe anti syphon pipe etc complete including trap set in and incl concrete complete all as specified.

Supply and fix in repair vitreous China wash basin white, flat back, size 580 x 460 mm with CP brackets (02 Nos), CP waste coupling full threaded 32mm dia, including cutting for pinning in ends of brackets and making good disturbed surfaces with CM (1:4) complete all as specified. Make:-(i) HINDWARE Cat No 10064 (Melisa) or equivalent in the list of makes. (ii) Essco Cat No ALE-544FT for waste coupling or equivalent in the list of makes.

S&F of PVC connections 15 mm size with PTMT nuts of length 600 mm.

Supply and fix in repair 15 mm bore Bib tap long body with wall flange with aerator all as specified. Make : Essco Cat No MQT 512 or equivalent

Supply and fix in repair 15 mm bore stop valve brass chromium plated for iron pipe or for unions including all as specified. Make : Essco Cat No MQT-513A/513B or equivalent as in the list of makes.

S&F in repairs angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified.

S&F for PVC (SWR) (Bore of pipe 110mm) type A pipes single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as specified.

S&F for PVC (SWR) bends any radius fixed to PVC Pipes/Steel Gutters etc complete all as specified. (Bore of pipe 110mm)

S&F 110mm dia PVC SWR vent cowl

M&L in repairs for CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 75 mm) as in repair

M&L for 150 mm size aluminium anodised cast type handles.

S&F of 200mm long aluminium anodised,barrel tower bolt of extruded section.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

Supply and fix vitreous China flat back urinals(white) of size 315mm x 265mm x 400mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including waste pipe, 15mm dia PVC connector pipe complete all as specified.

Supply and fixing in repair for vitreous China (white) wash down water closet pan (pedestal pattern) of size 935 x 425 x 780mm with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts, PVC seat cover (white) with SS fittings and making all necessary connections complete as specified. Make: Hindware Cat No 20011 (Sleek) for water closet or equivalent as in the list of makes.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

Supply and fix in repair CP Health Faucet of premium quality and make Jaquar or equivalent including two way bib cock and PVC telephonic flexible tube fixed to 15mm bore pipe.

S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; verticals , purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.

M&L 100 mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including bitumen filling in two panel etc complete all as specified.

S&F 100mm size mild steel butt hinges medium weight.

Demolition & breaking up drain pipes( salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm complete all as specified.

Excavation in trenches n.exc 1.5 in deep and n.exc 1.5 m wide for foundation etc not exc 10 sqm on plan and getting out in soft / loose soil complete all as specified.

Returning filling in, incl spreading, levelling watering & well ramming in layers n.exc 25cm in soft/loose soil complete all as specified.

Removing excavated material (soil) n.exc 1.5 km & depositing where complete all as specified.

Material & labour for Precast cement concrete Cover slab (1:½:3) type A-1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 as in cover slab of manhole complete all as directed. Note: Reinforcement shall be measured and paid for separately.

S&F for PVC (SWR) (Bore of pipe 160mm) pipes with working pressure 6 kg/cm2 single socketed, in any length with rubber ring joints fixed to walls with necessary clamps, bolts etc complete all as specified.

M&L PCC 1:3:6 type C-2 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified.

M&L PCC 1:3:6 Type C-1 (20mm graded aggregate) as in coping/benching for man holes complete all as specified.

M&L PCC 1:3:6 type C-2 concrete bed to drain pipes including packing under & haunching against the sides of pipes after they are laid & tested dia of pipe 150mm complete all as specified.

M&L cutting into existing manhole for connecting new drains making good to pipe and rendering cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished & reforming benching as required dia of pipe 150mm complete all as specified.

M & L 80 mm thick M-35 grade factory made vibratory compacted cement concrete rubber moulded, interlocking paver block any shape and size confiroming to IS 15658-2006 with grey cement and pigment as approved laid over and incl 50 mm thick consolidated sand cushion and joints filled with sand complete all as specified.

M & L for brick work with sub class B bricks laid on edge on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified.

M & L for brick work with sub class B bricks laid flat on vertical inclined sides of drain, bedded and jointed in CM (1:6) and pointed in CM (1:3) complete all as specified.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified.

M&L for point wiring complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sundn terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200 x 300mm and above this size not less than 1.63 mm thick duly painted with aluminum inside and anticorrosive paint outside, concealed in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws (or provision of modular sunken box, modular back plate and top cover for housing of modular switch,socket, regulators etc as per site requirement) for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost , One light point controlled by one way switch 5/6 amps complete all as specified.

ALL as per item no. 101 but One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps complete all as specified.

ALL as per item no. 101 but One socket out let 5/6 amps point on the same board complete all as specified.

ALL as per item no. 101 but One socket out let 5/6 amps point on the independent board complete all as specified.

All as per item No 101 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified.

S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified.

S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.

S&F Ceiling rose, surface type with back plate, three terminal /PVC/ polycarbonate, isolated body complete all as specified.

S & F deluxe fan electronic regulator 230 volts AC 50 Hzs rotary step white/ivory finish complete all as specified.

S&F, IP 20, class I, LED tube light fittings 20W (or nearest next higher wattage) (4feet), wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S & F LED street light fittings 35 Watt ,230 VAC outdoor type with high pressure die cast aluminium housing, heat resistant, toughned glass cover with IP66 protection complete all as spedified.

S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with din rail, IP-20 protection suitable for fixing MCB"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified.

S&F MCB, Single pole & neutral 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified.

S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete including taking down the old one complete all as specified.

M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified.

M & L Sub main wiring concealed type with two run single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size, making good the disturbed surfaces complete including necessary taking down.(NOTE : Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length. .

M&L for street light bracket made out of GI pipe light grade 32 MM dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 16 sqmm 2 core with and including all fixing & connecting accessories such as Aluminium cable lugs, cable gland, nut, bolts, washer etc complete including taking out old unsv cable as specified.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified.

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified.

M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified.

SHRI MANOIRANJAN BISWAS (BID ID -3250877)

L. B. SHARMA (BID ID -3250727)

M K Engineering WOrks (BID ID -3250428)

SHRI ARABINDA GHOSH (BID ID -3250497)

M/S D S CONSTRUCTION CO (BID ID -3250467)

SHRI MRITYUNJOY KAR (BID ID -3251406)

R K AGARWAL (BID ID -3250659)