SPECIAL REPAIRS TO FENCING AROUND QTRS OF JSI ENCLAVE AND OTM BLDG NO P152 REPAIR BAY OF FD WKSP COY IN THE AREA OF AGE BR I UNDER GE ARMY CENTRAL IN ARMY AREA JODHPUR (9067/E8)

Amount

(B/R WORK) Dismantling existing barbed wire fencing from fencing post, complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) any section,embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) any section,embedded in Cement concrete, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Demolition of cement concrete in ground floor or pavings n exc 15 cm in depth, below or above ground level and removing the debris out side of deffence land, complete all as specified and directed.

Excavation in post holes each not exceeding 0.5 Cum, getting out in any type of soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface, complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, complete all as specified & directed by Engineer-in-charge.

S&F mild steel sections like angle, flat etc in post and struts in fencing including cutting top to shape as directed,drilling holes,notching for wire etc;flat iron fillets (for securing wire mesh etc including all necessary drilling,bolting or riviting etc confirming to Fe-290Gde E-165 complete all as specified and as directed.

Supply only Mild steel round or square bars,in available length Fe-290(Gde-165) for fixing of chain link fencing, complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10cm long and dia 5 to 10 mm complete all as specified and as directed.

Supply only chain link MS galvanised fencing, any size or type (size as approved by GE) complete all as specified and as directed. Note:- BOO will be consitituted to determine the weight of chain link.

"Fixing only" chain link fencing including line wires,any mesh,size and type to any type of standards,rails, straining bolts, etc including provision of binding wire, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red Oxide zinc chrome primer, complete all as specified and as directed.

Taking down existing old Tar-felt from RCC roof / stone roof including removal of existing water proofing treatment of any description and bedding in any type of roof and removing rubbish to a distance exceeding 50 m but not exceeding 250 m, complete all as specified and as directed.

M& L for carrying out of water proofing treatment in roof to the following stages : (a)- M & L 10 mm thick sceeding in cement mortar 1:3 on brick work or concrete surfaces on roof surfaces mixed with WPC, surface finished even and smooth without using extra. (b)- Apply first coat of bitumen primer confirming to IS 3384-1986 @ 0.40Kg/Sqm. (c)- Second coat of bonding material using hot blown type bitumen confirming to IS- 702-1988 grade 85/25 @1.20 Kg/ Sqm (d) Third layer of 3 mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method. The side overlaps of minimum 75 mm and the end laps of minimum 100 mm. All overlaps & joints shall be sealed as per manufacturer's instructions. (e) Fourth coat of bonding material using hot blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm (f) Fifth and top most layer of surface finish 25mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding over APP membrane, the surface of concrete is to be finished even and smooth with using extra cement and proved V shaped groove 6mm wide & 10mm depth filled with mastic bitumen of (1:1) complete all as specified and directed by Engr-in-charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

Demolition of wall / floor tiling of any description of any thickness laid bedded and pointed in any mortar including backing coat/screed bed complete all as specified and directed.

75mm thick Plain cement concrete 1:3:6 type C1 (using 20mm graded crush stone aggregate), as in plinth protection including necessary form work laid in alternate bays and filling the joints with bitumen mastic filler, complete all as specified and directed.

25mm thick (average) PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate), as in sub base , the surface of concrete is to be finished even & rough to receive tile flooring surface, with out using extra cement, complete all as specified and as directed.

M&L Machine cut kota stone slab 20 to 25mm thick as in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified and as directed.

M&L Machine cut kota stone slab 20 to 25mm thick as in riser laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10mm thick screed bed in CM 1:4, complete all as specified and as directed.

M&L Makarana white Marble stone slabs machine cut , bedded, jointed, and pointed with grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4 including dismantling Stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises complete all as specified and as directed.

Rendering 10 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15 mm thick in CM 1:6 on stone masonry surfaces ( internal wall surfces) finished even and smooth with out using extra cement, complete all as specified and as directed.

Racking out joints/ pointing to random rubble or polygonal rubble un-coursed or brought up to courses masonry built in cement mortar or cement lime mortar, coursed or un-coursed in walls not less than 12mm deep, washing the joints, removing rubbish off the premises and keeping the surface to pointed or plastered wet for two days prior to re-pointing or plastering, complete all as specified & directed by Engineer-in-charge.

M&L for keyed pointing in CM 1:3 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses, complete all as specified and as directed.

M&L for flush pointing in CM 1:3 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses, complete all as specified and as directed.

Preparing new plastered or unplastered surfaces and applying with Birla/JK wall care putty 3mm thick (in two layers) including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Complete removal of existing treatment of any description on walls and applying with wall care putty 3mm thick (in two layer) including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and as directed.

Preparing new plastered or unplastered surfaces and applying with Birla/JK wall care putty 3mm thick (in two layers) including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper over one coat of primer on ceiling complete all as specified and as directed.

Preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed.

Preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint incld & over one coat of primer complete all as specified and as directed.

Preparation of old painted surfaces of walls or roofs by brooming down or steel wire brushing, scraping down smoke spot, moulds, moss and efflorescent salt and greasy spots and applying one coat of cement base paint as camouflage pattern complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed .

Preparation of new or previously untreated steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red Oxide zinc chrome primer, complete all as specified and as directed.

Demolition of stone / boulder masonry walling built in cement mortar including all quoins arches pillars etc and removal unserviceable materials, debris, rubbish to out side MD land, complete all as specified and as directed.

Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in lime or cement mortar of the same mix as for new walling.

Forming jambs etc to openings with including cutting, toothing and properly bonding into old work including facing and pointing [if necessary] to match existing work, complete built in Cement Mortar 1:4 complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type, regular coursed , well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed.

All as per item no. 40.00 here-in-above, but except stone.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to square rubble walling un-coursed or brought up to courses, complete all as specified & as directed by Engineer-in-charge.

Pre-cast cement concrete block masonry using PCC, 1:2:4, type B-1 solid blocks, not exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius, complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutters), complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutters), complete all as specified and as directed.

Taking down Shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each complete all as specified and as directed.

Taking down Shutters of any description and refixing the shutters in the same opening of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.

M&L mild steel work as in door frame and similar work fixed with angle cleates, confirming to Fe 290 Grade E - 165 complete all as specified and as directed.

M&L rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165 complete all as specified and as directed.

M&L 35mm thick factory made 2nd class HW glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and as directed.

M&L factory Made flush shutters, 35 mm thick solid core with block board core construction, both side laminated, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

Taking down steel windows and ventilators ( glazed / fly proof) of any description, complete all as specified and as directed.

S&F Factory made steel window with side hung shutters including box type hinges, steel peg stay, glazed window, complete all as specified and as directed.

S&F Factory made steel window with side hung shutters including box type hinges, steel peg stay, gauged window, complete all as specified and as directed.

S&F Factory made steel ventilators with top hung shutters including box type hinges, steel peg stay, glazed ventilator, complete all as specified and as directed.

S&F Factory made steel ventilators with top hung shutters including box type hinges, steel peg stay, gauged ventilator, complete all as specified and as directed.

S&F 4.00 mm thick figured glass,pin head type and glazing with putty in square not exceeding 0.50 Sqm in each pane, complete all as specified and as directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed.

S&F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00mm and fixed to Al door/window, complete all as specified and as directed.

M & L for Welding in repairs exc 2.5cm but n exc 5cm in length, thickness of welding metal not exc 6 mm, complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed .

S&F SS butt hinge of size 100mm , medium weight, complete all as specified and as directed.

S&F butt hinge of size 100mm , medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F 125 mm long double action spring hinges, mild steel with steel wire spring, stove enameled, black complete all as specified & directed by Engineer-in-charge.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor, complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in hold fast block concrete, complete all as specified and as directed.

M&L flat iron as in hold fast for door frame and similar work fixed with angle cleates, confirming to Fe 290 Grade - E - 165 complete all as specified and as directed.

S& F in repairs decorative SS curtain rod of 22 to 25 mm dia, including 8 nos PVC rings per running meter of curtain rod, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., including for provision of PVC protected sheeting and its removal after fixing the frame work, complete all as specified and directed. Note:- (i)- Weight of joining cleat shall be added to main frame. (ii)- Hinges, shutters and lugs shall be measured and paid for separately.

S&F 4.80mm thick sheet glass tinted, best quality and glazing with necessary fixture in squares not exceeding 0.5 Sq.m in each pane with glazing pin, complete all as specified and as directed.

Demolition of cement concrete in ground floor or pavings n exc 15 cm in depth, below or above ground level and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & as directed by Engineer-in-charge.

GI frame work size of grid 605 x 605mm for seamless ceiling comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm c/c intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm c/c with GI cleat and steel expansion fasteners with and inccluding ceiling section (not exceeding 1.2M length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel at 457mm c/c and hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and including providing gypsum board 12mm thick in ceiling fixed with screws as per manufacturers instructions over the frame work and preparation of ceiling board and applying two coats of oil bound distemper over a coat of 'Birla' wall / ceiling care putty, complete all as specified and as directed.

Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and as directed.

M&L Factory made machine pressed precast concrete interlocking paver block, size 60 mm thick top layer of 6mm thick of anti abrassive rubberised material & any shape, rubberised finish confirming to IS 15658-2006, M-35 Grade, with grey cement and pigments, over and including sand cushioning of 25mm thick, complete all as specified and as directed.

M&L machine pressed precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerb stone blocks of approved size and setting in cement mortar 1:4, complete all as specified and as directed .

Pre-cast cement concrete block masonry using PCC, 1:2:4, type B-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius, complete all as specified and as directed.

Dismantling of old u/s water storage tank capacity upto 500 liters and removing to store / credit to contractor, complete all as per specified and directed by Engg-in-charge.

M&L rotational moulded polythene water storage tanks of 500 ltrs capacity, (white) three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including ball valves for 20 mm bore pipe (minimum weight 210 gms), high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed. Make:- Sintex / Rotex / Polytuf.

Non skid ceramic tiles (premium quality), coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4, complete all as specified and as directed. Make :- Somany / Kajaria / Johnson.

Granite slab 18 to 20mm thick machine cut, factory polished, Jet Black colour, as in steps, jambs, pillars, window cills, cooking platform, and like bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone, including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4, complete all as specified and as directed.

Rounding of the edges (moulding of double layer stone) of stone slabs as in cooking plateform treads of steps, shelves & cills complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or credited to contractor, complete all as specified and as directed.

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed, complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed, complete to walls and ceiling or laid in floors, complete all as specified and as directed.

"Fixing only" GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

"Fixing only" GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed, complete to walls and ceiling or laid in floors, complete all as specified and as directed.

"Fixing only" GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed, complete to walls and ceiling or laid in floors, complete all as specified and as directed.

Coloured glazed ceramic tiles (premium quality) of size 450mmx350mmx7mm/ 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed. Note:- The tiles shall be in one or more colour patterns incld highlighters all as per approved and directed by Engg-in-charge. Make :- Somany / Kajaria / Johnson.

(E/M work) Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc . removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with flush type metal flush box of suitable size for mounting of flush type switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch, complete all as specified and directed .

All as per Serial Item No. 98 above but one 3/5 pin socket outlet 5/6 Amps on independent board, complete all as specified and as directed.

All as per Serial Item No.98 above but for one 3/5 pin socket outlet 5/6 Amps on the same board with other switches, complete all as specified and as directed.

All as per Serial Item No.163 above but cable size 2.50 sqmm for 3 / 5 Pin & 6/16 Amp

All as per serial Item No.161 above but for 15 Amps 5/6 pin socket point on independent board with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor with 4.00 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire, complete all as specified and directed .

S&F flush type switch single pole 1way, 6 Amps 1 Module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F flush type switch single pole 1way, 16 Amps 1 Module, complete all as specified and directed Make: Legrand / L&T / Schneider

S&F flush type socket, 6 amps 2/3 pins, 2 in 1, combined 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F flush type socket, 6/16 amps 2/3/6 pins, 2 in 1, combined 2 module, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F Electronic fan regulator, stepped type, 100 W, AC, 230 Volts, complete all as directed. Make: Legrand / L&T / Schneider

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated body complete all as specified and as directed.

Fixing only integrated LED channel tube light fitting, 1X20W, 230V, energy efficient box type, integral, sleek polycarbonate with white acrylic cover epoxy powder coated with fluorscent tube light 1X20W complete with all accesories internally pre wired and connectiong up with twin core twisted flexible copper conductor of suitable size, complete all as specified and as directed. Note:- Material shall be issued under Sch 'B' items

Supply, Fix ,connecting and testing of LED flood light 70W with innovative thermal management and in multiple optics and equipped with IP66 protection, ideal for stadium lighting and Highmast applications fixed on pole including taking down unserviceable light fitting complete all as specified and as directed. Make : CG Cat Part No. LFLN-100-CDL/60 or Techno commercially equivalent model of make Havells/Philips/Bajaj

S&F lamp Holder, insulated body with back plate, 230 Volts for batten fittings, complete all as specified and as directed. Make: Legrand / L&T / Schneider

Fixing, connecting and commissioning of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 35/45 watt 5700K, fixed on pole, incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable including taking down unserviceable light fitting complete all as per specified and directed by Engg-in-charge. Note:- Material shall be issued under Sch 'B' items

Taking down & hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan

M&L in repairs submain wiring with two runs of 6 sqmm with one run of 4 Sqmm earth wire of 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through in and including heavy duty non metallic PVC rigid conduit of 25mm dia with accessories fixed & concealing on wall / ceiling and connected to common earth dolly complete all as specified and directed. Note :- Two runs of 6 sqmm cable & one run of 4 sqmm earth cable and one run of PVC conduit shall be measured as one length for the purpose of measurement.

S&F Single pole and neutral sheet metal enclosure with two pin earth industrial plug and socket with one MCB SP 20 Amps complete all as specified and as directed. Make:- Legrand cat part no. 507811 or its equivalent make of / Havells / L&T / ABB

S&F factory made prewired distribution board in sheet metal enclosure in double door with 200A rated bus bar,TPN 4 way, 240V for fixing MCB's, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F factory made prewired distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's, complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F MCB SP ‘C’ Curve 10KA, 6 to 32 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 63 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB TPN ‘C’ Curve 10KA, 63 amps, complete all as specified and directed . Make:- Legrand / Havells / L&T

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel including dismentling of existing earth pit etc complete all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty, insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi solid aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 4 core 16 sqmm complete all as specified and directed

Note for all above items:- (i) All items in BOQ are for "Materials and labour / Supply and fix" and to be executed in "Repairs i.e. incld taking down old items" unless optherwise specifically mentioned as "Suppply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly. (ii)The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount.