S/R to Superintendent of Police Residence Nabarangpur such as Inside wall painting UPVC Door and Windows Floor Tiles in the District of Nabarangpur for the year 2026-27. Buildings

Finishing wall surfaces with acrylic wall putty (water based) of approved make and finished smooth to receive painting including cost of scaffolding, staging charges with cost & conveyance of all materials taxes labour T & P etc complete as directed by Engineer-In-Charges.

Priming one coat to wall surface using water bound cement primer including cost, conveyance, taxes of all materials paint labour T&P etc complete in all respect.

Wall painting two coats with plastic emulsion paint of approved shade on new work to give and even shade including cost, conveyance, taxes of all materials paint labour T&P etc complete in all respect.

Supplying, fitting and fixing of vetrified tiles of premium grade having thickness 8mm to 10mm of 60Cm x 60Cm plain size (Homogenous) in floors, treads or steps and landing on 25mm thick bed of cement mortar, cement and sand (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including cost, conveyance, royalties and taxes of all materials with labour, T&P required for the work etc. complete in all respect in all floors as directed by the Engineer-In-Charge.

Painting two coats with approved paint on wood work & iron work (Old & New) including cost, conveyance , royalties and taxes of all materials and labour with T&P required for the work in all floors including cost of paint and primer etc. complete.

Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 Mtr. Center to Center and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials labour, T & P etc required for the work complete in all respect as directed by the Engineer in charge.

Painting two coats with weather seal over a coat of primer after cleaning the surface including cost, conveyance, taxes of all materials, cost of all labour with T & P etc required for the work etc complete in all respect.

Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Door - 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement Door Sash Profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge. Confirming to ASTM D 638-14, EN-477-95 and other applicable standards.

Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Window with top fixed - 60- Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement of Window Sash Profile and 74mm x 60mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 no., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge. Confirming to ASTM D 638-14, EN-477-95 and other applicable standards.

Providing, fitting & fixing up partition walling OEL aluminium anodized as single grove and double groove respectively as horizontal and vertical member an OEL section 4660 as tapered clip for fixing up 12 mm thick prelaminated board (Novapan Make) etc. including all cost of labour T&P hire charges of drilling machine labour charges etc complete. As per direction of the Engineer-In-Charge.