PERIODICAL SERVICES AND CAMOUFLAGE PAINT IN CERTAIN BLDGS IN TECHNICAL AND DOMESTIC AREA AT AF STATION UNDER GE (AF) MC CHANDIGARH

Amount

M&L for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old steel surfaces of existing treatment from plain/corrugated/semi corrugated steel surfaces over 10cm width/girth and applying one coat of synthetic enamel paint (in camouflage pattern using number colours) upto 12 Mtr height including necessary scaffolding etc complete all as specified and as directed. Note : Pattern of camouflage shall be approved by GE.

M&L for preparation of old plastered/unplastered/ concrete surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint and at any height including necessary scaffolding etc complete all as specified and as directed.

M & L for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of aluminium paint upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old steel or iron surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint upto 12 Mtr height , including provision of scafloding complete all as specified. Note for item 1 to 5:- (a) All synthetic enamel paint/Aluminium paint, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. (d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite)

(e) Unless otherwise specified the tints of paint shall be as approved by the GE (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. (h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of white wash upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed..

M&L for preparation of old distempered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss, trading oil, greasy spots and applying one coat of oil bound distemper on wall any colour as approved by GE including a thin layer of putty over a coat of primer (where as required), upto 12 Mtr height including necessary scaffolding etc complete all as specified and as directed.

M&L for complete removal of existing/new surface and applying two coats of oil bound distemper, white or tinted including a thin layer of putty over a coat of primer upto 12 Mtr height including necessary scaffolding etc complete all as specified and as directed.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying one coat of oil bound distemper, white or tinted upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of old plastered /concrete surfaces of ceiling and applying two coats of oil bound distemper, white or tinted including a thin layer of putty over a coat of primer(where as required) upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed. Note for item 8 to 11:- (a) All oil bound distemper, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. (d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. (i) Nerolac (ii) Asian Paints (iii)Berger Paints

(e) Unless otherwise specified the tints of paint shall be as approved by the GE (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. (h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.

M&L for preparation of old plastered surfaces of wall and applying one coat of exterior acrylic emulsion weather proof treatment upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed. Note : The tint and shade be as approved by the GE.

M&L for preparation of old plastered/unplastered/ concrete surfaces of walls and applying two coats of exterior emulsion paint (in camouflage pattern using number of colours) over and including one coat of primer including necessary scaffolding etc complete all as specified. Note : Pattern of camouflage shall be approved by GE.

M&L for complete removal of existing treatment from external surface on wall by wire brushed & stopping of surfaces & leveling/edging the disturbed places/edges using putty to obtain smooth regular/even finish using sand paper and applying two coats of exterior emulsion paint over and including one coat of primer and upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed. Note for item 12 to 14:- (a) All exterior acrylic emulsion paint, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. (d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Asian Paints (Apex) ii Berger Paints (Weather Coat Smooth) iii. Goodlass Nerolac (Nerolac Excel 100% Exterior)

(e) Unless otherwise specified the tints of paint shall be as approved by the GE (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. (h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.

M&L for preparation of old plastered/unplastered/concrete surfaces of walls, kerbs stone & stopping of surfaces and applying one coat of cement base paint upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed. Note:- (a) All cement base paint, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. (d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. ASIAN PAINTS ii. BERGER iii. JENSON & NICHOLSON iv. DURACEM

(e) Unless otherwise specified the tints of paint shall be as approved by the GE (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. (h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.

M&L for preparation of old plastered/unplastered/ concrete surfaces of walls and applying one coat of plastic emulsion paint, white or tinted upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed. Note:- (a) All plastic emulsion paint, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. (d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Goodlass Nerolac ii. Shalimer Paints iii. Asian Paints iv. Berger Paints v. Jenson & Nicholson

(e) Unless otherwise specified the tints of paint shall be as approved by the GE (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. (h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.

Taking down cement plaster on brick/concrete walls etc and racking out joints, hacking for key, scrubbing down with water etc upto 12 Mtr height any description complete all as specified and directed.

M&L for 15mm thick in cement mortar 1:3 mixed with liquid WPC as in chajjas upto 12 Mtr height including necessary scaffolding etc complete all as specified and as directed. Note : WPC shall be measured and paid separately.

M&L for 15mm thick rendering in cement mortar 1:6 on walls of other than fair face even and smooth without using extra cement compete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on walls of surfaces finished even and smooth without using extra cement upto 12 Mtr height complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 as on ceiling of surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered/concrete surfaces of walls and applying two coats of oil bound distemper over one coat of primer including a thin layer of putty , white or tinted upto 12 Mtr height including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall/chajjas and applying three coats of white wash as on wall/Chajjas compete all as specified and directed .

M&L for preparation for newly plastered wall, chajjas/facia etc surfaces and applying two coats of cement paint upto 12 Mtr height as per manufacturer's instruction etc compete all as specified and directed. Note:- (a) All cement base paint, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint will be approved by the GE. (d) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. ASIAN PAINTS ii. BERGER iii. JENSON & NICHOLSON iv. DURACEM

(e) Unless otherwise specified the tints of paint shall be as approved by the GE (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval. (g) The surface shall be thoroughly cleaned and dusted. All dirt scales oil and grease shall be thoroughly removed before painting is started. The prepared surface shall be inspected and approved by the GE before painting is commenced. The weather shall not be foggy/rainy, dusty or windy. The suitability of the weather will be determined by the Engineer-in-Charge. (h) No hair marks from the brush or clogging of paint buddles shall be left on the work. Surface shall ordinarily not be painted until it has dried up completely. Trial patches of paint shall be laid at intervals to check if drying is satisfactory.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer upto 12m height including necessary scaffolding, compete all as specified and directed .

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash as on ceiling compete all as specified and directed .

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for providing cement concrete type BO 1:2:4 (12.5mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing course, parapets and railing upto 60cm height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and threading including demolition or cement concrete etc complete all as specified and directed.

M&L for writing letters or figures Block, Roman, italic or Indian) not.exceeding 30cm high with synthetic enamel paint complete all as specified and directed.

M&L for writing steps, commas, short lines, dashes, hyphens, brackets etc with synthetic enamel paint complete all as specified and directed.

M&L for Cutting out the shrubs, plants of any description and girth n.exc 15cm and taking out the roots from the walls or roots and making good or dismantled portion with cement mortar (1:3), upto 12 Mtr height complete all as specified and directed.

jmv engineers

ASW ENTERPRISES

M/s Matloob Ahmed

MS FUTEC ENGINEERS